HUAWEI-MPLS-TP-MIB
AI MIB Summary
The HUAWEI-MPLS-TP-MIB module enables the monitoring and management of Huawei-specific Multiprotocol Label Switching Transport Profile (MPLS-TP) entities, including private managed objects and trap definitions, on Huawei network equipment. It facilitates the collection of operational metrics and fault notifications specific to the MPLS-TP transport layer, such as pseudowire states, tunnel status, and protocol-specific error counters, which are not covered by standard IETF MIBs.
This MIB is used for defining the HUAWEI private extended Transport Profile of Multiprotocol Label Switching (MPLS-TP) MIB object. All MIB objects are used to describe private managed objects and trap definitions for MPLS-TP.
Main OID:
hwMplsTpMib.1.3.6.1.4.1.2011.5.25.305
43
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
hwMplsTpMibThis MIB is used for defining the HUAWEI private
extended Transport Profile of Multiprotocol Label Switching (MPLS-TP) MIB
object. All MIB objects are used to describe private
managed objects and trap definitions for MPLS-TP. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.305 |
hwMplsTpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.1 |
hwMplsTpTables OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.1.1 |
hwMplsTpTunnelTableA tp-tunnel needs to be uniquely identified across
an MPLS-TP network. Indexes hwMplsTpTunnelIngressIndex,
hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId,
hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and
hwMplsTpEgressGlobalId uniquely identifies a
tunnel across an MPLS-TP network.
The indexes of this table are hwMplsTpTunnelIngressIndex,
hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId,
hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and
hwMplsTpEgressGlobalId. SEQUENCE OF HwMplsTpTunnelEntry .1.3.6.1.4.1.2011.5.25.305.1.1.1 |
hwMplsTpTunnelEntryA tp-tunnel needs to be uniquely identified across
an MPLS-TP network. Indexes hwMplsTpTunnelIngressIndex,
hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId,
hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and
hwMplsTpEgressGlobalId uniquely identifies a
tunnel across an MPLS-TP network.
The indexes of this entry are hwMplsTpTunnelIngressIndex,
hwMplsTpTunnelIngressLSRId, hwMplsTpIngressGlobalId,
hwMplsTpTunnelEgressIndex, hwMplsTpTunnelEgressLSRId and
hwMplsTpEgressGlobalId. HwMplsTpTunnelEntry .1.3.6.1.4.1.2011.5.25.305.1.1.1.1 |
hwMplsTpTunnelIngressIndexIdentity of the ingress LSR associated with this
tunnel instance. This value SHOULD be equal to the Tunnel
Sender Address in the Sender Template object and MAY
be equal to the Extended Tunnel Id field in the
SESSION object. MplsTunnelIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.1 |
hwMplsTpTunnelIngressLSRIdIdentity of the ingress LSR associated with this
tp-tunnel instance. MplsExtendedTunnelId (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.2 |
hwMplsTpIngressGlobalIdThe GlobalId is defined to uniquely identify an Ingress LSR
operator.This Value idefines a globally unique Attachment Interface
Identifier (AII). That AII is composed of three parts: a
Global_ID that uniquely identifies an operator, a prefix,
and, finally, an attachment circuit identifier. Integer32 .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.3 |
hwMplsTpTunnelEgressIndexIdentity of the egress LSR associated with this
tunnel instance. MplsTunnelIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.4 |
hwMplsTpTunnelEgressLSRIdIdentity of the egress LSR associated with this
tunnel instance. MplsExtendedTunnelId (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.5 |
hwMplsTpEgressGlobalIdThe GlobalId is defined to uniquely identify an Ingress LSR
operator.This Value idefines a globally unique Attachment Interface
Identifier (AII). That AII is composed of three parts: a
Global_ID that uniquely identifies an operator, a prefix,
and, finally, an attachment circuit identifier. Integer32 .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.6 |
hwMplsTpTunnelIfNameIndicates the tp-tunnel interface name. The object is
only valid at the ingress.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.7 |
hwMplsTpTunnelAdminStatusIndicates the management status of this
tunnel.Reference to MPLS-TE-STD-MIB.
Options:
1. up(1) -indicates the management status of this tunnel is up.
2. down(2) -indicates the management status of this tunnel is down.
3. testing(3) -indicates the tunnel is used in some test mode.ro Enumeration .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.8 |
hwMplsTpTunnelOperStatusIndicates the actual operational status of this tunnel,
which is but not limited to the status of this tunnel of
a certain period.Reference to MPLS-TE-STD-MIB.
Options:
1. up(1) -indicates that the operational status of this tunnel is up.
2. down(2) -indicates that the operational status of this tunnel is down.
3. testing(3) -indicates that the tunnel is used in some test mode.
4. unknown(4) -indicates the invalid value.
5. dormant(5) -indicates that the status can not be determined.
6. notPresent(6) -indicates that some component is missing
7. lowerLayerDown(7) -indicates the Down state due to the state of lower layer interfaces.ro Enumeration .1.3.6.1.4.1.2011.5.25.305.1.1.1.1.9 |
hwMplsTpLspTableA table of all TP lsps seen by a given sys-tem. SEQUENCE OF HwMplsTpLspEntry .1.3.6.1.4.1.2011.5.25.305.1.1.2 |
hwMplsTpLspEntryAn entry in this table represents information
on a single TP LSP which is represented by
a session's index triple (hwMplsTpTunnelIngressInstance,
hwMplsTpTunnelEgressInstance, hwMplsTpLspType). HwMplsTpLspEntry .1.3.6.1.4.1.2011.5.25.305.1.1.2.1 |
hwMplsTpTunnelIngressInstanceUniquely identifies a particular instance of a
tunnel between a pair of ingress and egress LSRs.ro MplsTunnelInstanceIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.2.1.1 |
hwMplsTpTunnelEgressInstanceUniquely identifies a particular instance of a
tunnel between a pair of egress and ingress LSRs.ro MplsTunnelInstanceIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2011.5.25.305.1.1.2.1.2 |
hwMplsTpLspTypeThe type of LSP connection.
Options:
1. protection(1) -indicates that the lsp type of this tunnel is protection lsp.
2. working(2) -indicates that the lsp type of this tunnel is working lsp.ro Enumeration .1.3.6.1.4.1.2011.5.25.305.1.1.2.1.3 |
hwMplsTpGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.1.2 |
hwMplsTpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.2 |
hwMplsTpTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.2.1 |
hwMplsTpTunnelTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.2.2 |
hwMplsTpTunnelDownClearThis notification is generated when a
mplsTpTunnelOperStatus object for one of the
configured tunnels is about to leave the down state
and transition into some other state (but not into
the notPresent state). This other state is
indicated by the included value of mplsTpTunnelOperStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.2.1 |
hwMplsTpTunnelDownThis notification is generated when a
mplsTpTunnelOperStatus object for one of the
configured tunnels is about to enter the down state
from some other state (but not from the notPresent
state). This other state is indicated by the
included value of mplsTpTunnelOperStatus. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.2.2 |
hwMplsTpTunnelResumeThis object is used to indicate that data switching from protection Lsp to Working Lsp. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.2.3 |
hwMplsTpTunnelSwitchThis object is used to indicate that data switching from protection Lsp to Working Lsp. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.2.4 |
hwMplsTpLspTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.2.3 |
hwMplsTpLspOamDlocClearThis object indicates that the link recovers from a connectivity fault. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.1 |
hwMplsTpLspOamDlocThis object is used to indicates the connectivity fault of the link. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.2 |
hwMplsTpLspOamRdiClearThis object indicates that the link recovers from a remote defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.3 |
hwMplsTpLspOamRdiThis object is used to indicates the remote defect of the link. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.4 |
hwMplsTpLspOamMisconnectionEncapClearThis object indicates that the link recovers from an misconnection encap defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.5 |
hwMplsTpLspOamMisconnectionEncapThis object indicates that the link receivs from an misconnection encap defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.6 |
hwMplsTpLspOamMisconnectionDiscrClearThis object indicates that the link recovers from an misconnection discription defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.7 |
hwMplsTpLspOamMisconnectionDiscrThis object indicates that the link receivs from an misconnection discription defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.8 |
hwMplsTpLspOamMisconnectionMEPClearThis object indicates that the link recovers from an unexpect MEG-ID defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.9 |
hwMplsTpLspOamMisconnectionMEPThis object indicates the link receivs an unexpect MEG-ID defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.10 |
hwMplsTpLspOamMisconnectionSECClearThis object indicates that the link recovers from an Misconnection SEC defect . NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.11 |
hwMplsTpLspOamMisconnectionSECThis object indicates that the link receivs from an Misconnection SEC defect. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.305.2.3.12 |
hwMplsTpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.3 |
hwMplsTpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.3.1 |
hwMplsTpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.305.3.2 |