HUAWEI-MSTP-MIB
AI MIB Summary
The HUAWEI-MSTP-MIB enables monitoring and configuration of Multiple Spanning Tree Protocol (MSTP) parameters on Huawei bridge devices, including bridge priority, root path costs, and VLAN-to-instance mappings. It facilitates the retrieval of MSTP state variables and the modification of operational settings to manage loop prevention and traffic forwarding within the Layer 2 network topology.
This module include the information about MSTP protocol in the bridge. The information can be read and some of them can be set.
Main OID:
hwMstp.1.3.6.1.4.1.2011.5.25.42.4
243
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
243 total| Object Name |
|---|
hwL2Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.42 |
hwMstpThis module include the information about MSTP protocol in the bridge.
The information can be read and some of them can be set. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.42.4 |
hwMstpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.42.4.1 |
hwMstpStatusWhether the Bridge MSTP is enabled.
Enable indicate that MSTP enable in the bridge;
Disabled indicate that MSTP disable in the bridge.
By default, the Bridge MSTP is disabled.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.1 |
hwMstpForceVersionThe mode of this Bridge spanning-tree protocol.
At present, the bridge hold out STP compatible mode and MSTP .
User can set the mode by command line.
By default, the mode is MSTP.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.2 |
hwMstpDiameterThe diameter of Bridge.
It stands for the scope of the network.
It affects the time that include hello time,
forward delay time, maxage. Every bridge can set
the diameter of Bridge, and it is effective when
the bridge is root bridge. Effective in the CIST
By default, the diameter is 7.
The value of hwMstpDiameter is only unused(65535) when it is
read.rw Integer32 (2..7 | 65535) .1.3.6.1.4.1.2011.5.25.42.4.1.3 |
hwMstpBridgeMaxHopsThe maximum value of the Bridge hops.
It can limit the scope of the bridge network.
It is effective when the bridge is root bridge.
The BPDU that the bridge receives from
the Designed bridge will be dropped
when the hops in the BPDU is zero .
By default, the value is 20.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.4 |
hwMstpMasterBridgeIDThe Bridge Identifier of the current Master Bridge.
It is the root Bridge Identifier of the instance 0 in the region.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.5 |
hwMstpMasterPathCostThe CIST path cost from the transmitting Bridge to the Master Bridge.
By default, the value is 0.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.6 |
hwMstpBpduGuardWhether the Bridge BPDU Guard function is enabled. If the function
is enabled, the port will shutdown when received BPDU and the port
is configured as edgeport. The purpose of the function is to prevent the bridge from
BPDU attacking. By default, the function is disabledrw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.7 |
hwMstpAdminFormatSelectorThe administrative Configuration Identifier Format Selector in use
by the Bridge. This has a value of 0 indicate the format specified
in the Standard of IEEE 802.1s. By default, the value is 0ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.8 |
hwMstpAdminRegionNameThis MSTP administrative region name.
It changes to hwMstpOperRegionName
when user use the activing command
to active the configuration of the region.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.9 |
hwMstpAdminRevisionLevelThis MSTP administrative revision level.
It changes to hwMstpOperRevisionLevel
when user use the activing command
to active the configuration of the region.
By default, the value is 0.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.10 |
hwMstpOperFormatSelectorThe operative Configuration Identifier Format Selector in use by the
Bridge. This has a value of 0 indicate the format specified in the
Standard of IEEE 802.1s. By default, the value is 0.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.11 |
hwMstpOperRegionNameThis MSTP operative region name.
It can be used to determine whether
the region is the same region with
the mapping between VLAN and instance
and hwMstpOperRevisionLevel.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.12 |
hwMstpOperRevisionLevelThis MSTP operative revision level.
It can be used to determine whether
the region is the same region with
the mapping between VLAN and instance
and hwMstpOperRegionName.
By default, the value is 0ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.13 |
hwMstpRegionConfActiveActive the region configuration.
Generally, the value of the hwMstpRegionConfActive is disable,
but the value will be set as enable if Net Manager want to
active the configure of the region in the bridge. And then
all manager configuration will change to operable configuration.
The value of hwMstpRegionConfActive is only disable when it is read.
It is only enable when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.14 |
hwMstpDefaultVlanAlloSet default configuration about VLAN allocation and all VLANs
are mapped to CIST.
The value of hwMstpDefaultVlanAllo is only unused(65535) when it is read.
It is only enable(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.15 |
hwMstpDefaultRegionNameSet default region name.
The value of hwMstpDefaultRegionName is only unused(65535) when it is read.
It is only reset(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.16 |
hwMstpPathCostStandardPath cost standard of the bridge. Value dot1d-1998 is
IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard,
and value legacy is a private legacy standard. The default path cost standard is 2(IEEE 802.1t standard).rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.17 |
hwMstpVIDAllocationTableThe table includes the information of the VLAN with relation to the instance of MSTP. SEQUENCE OF HwMstpVIDAllocationEntry .1.3.6.1.4.1.2011.5.25.42.4.1.18 |
hwMstpVIDAllocationEntryThe table includes the information of the VLAN with relation to the instance of MSTP.
The index of the table is vlanid. Default, the VLAN is in the CIST. HwMstpVIDAllocationEntry .1.3.6.1.4.1.2011.5.25.42.4.1.18.1 |
hwMstpVIDVLAN Identifier. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.18.1.1 |
hwMstpAdminMstIDAdministrative Multiple spanning-tree instance Identifier.
The relation between VLAN and Multiple spanning-tree instance
is set by operation in the region,
but it isn't effective if the configuration isn't actived.
The scope of instance identifier is different, some versions
are 0 to 48.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.18.1.2 |
hwMstpOperMstIDOperative Multiple spanning-tree instance Identifier.
The relation between VLAN and Multiple spanning-tree instance
is effective in the bridge.
The scope of instance identifier is different, some versions
are 0 to 48.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.18.1.3 |
hwMstpInstanceTableThe table includes the information of the instance. SEQUENCE OF HwMstpInstanceEntry .1.3.6.1.4.1.2011.5.25.42.4.1.19 |
hwMstpInstanceEntryThe table includes the information of the instance.
The index of the table is Multiple spanning-tree instance Identifier. HwMstpInstanceEntry .1.3.6.1.4.1.2011.5.25.42.4.1.19.1 |
hwMstpInstanceIDMultiple spanning-tree instance Identifier.
The scope of instance identifier is different,
some versions are 0 to 48.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.1 |
hwMstpiBridgeIDThe Bridge Identifier for the spanning tree instance
identified by MSTID.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.2 |
hwMstpiBridgePriorityThe Bridge Priority for the spanning tree instance
identified by MSTID. Step of 4096.For example,
we can set the Priority of the bridge such as 0, 4096, 8192 etc.
It can be used to determined whether the bridge is the root of
the spanning tree.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.3 |
hwMstpiDesignedRootThe Bridge Identifier of the Root Bridge for the spanning
tree instance identified by MSTID.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.4 |
hwMstpiRootPathCostThe path cost from the transmitting Bridge to the Root Bridge
for the spanning tree instance identified by MSTID.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.5 |
hwMstpiRootPortThe root port for the spanning tree instance identified by the MSTID.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.6 |
hwMstpiRootTypeConfig this Bridge as a primary root or secondary root / cancel
the root for this spanning tree instance identified by MSTID.
The current value of the hwMstpiRootType is the value
that was set recently.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.7 |
hwMstpiRemainingHopsThe remaining hops of the spanning tree instance identified by MSTID.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.8 |
hwMstpiAdminMappedVlanListLowThe lower part of administrative VLAN list mapped to the spanning
tree instance identified by MSTID.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.9 |
hwMstpiAdminMappedVlanListHighThe higher part of administrative VLAN list mapped to the spanning
tree instance identified by MSTID.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.10 |
hwMstpiOperMappedVlanListLowThe lower part of operative VLAN list mapped to the spanning
tree instance identified by MSTID.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.11 |
hwMstpiOperMappedVlanListHighThe higher part of operative VLAN list mapped to the spanning
tree instance identified by MSTID.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.12 |
hwMstpiRowStatusTo band MSTI and VLAN List. Operation of CreateAndGo can be
used to create a new instance, and operation of Destroy be
used to destroy an existent instance. But these operation
won't be effective if they are not actived by executing
command of active region-configuration or setting mib
node of hwMstpRegionConfActive.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.42.4.1.19.1.13 |
hwMstpPortTableThe table includes the information of the port
of the multiple spanning tree instance. SEQUENCE OF HwMstpPortEntry .1.3.6.1.4.1.2011.5.25.42.4.1.20 |
hwMstpPortEntryThe table includes the information of the port
of the multiple spanning tree instance. The index
of the table is the aggregation of multiple spanning
tree instance identifier and port index. HwMstpPortEntry .1.3.6.1.4.1.2011.5.25.42.4.1.20.1 |
hwMstpiPortIndexThe index of the bridge port.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.1 |
hwMstpiStateThe current state of the port. It must be disabled, discarding, learning or forwarding.ro Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.2 |
hwMstpiPortPriorityThe value of the priority field which is contained in the
first (in network byte order) four bits of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value of mstiPortIndex.
And step of 16. It is the priority of the port in the multiple spanning tree instance,
and it can be used to determine the role of the port in the multiple spanning tree.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.3 |
hwMstpiPathCostthe path cost of paths with which the package passes the port.
The range of path cost is 1..65535 for 802.1d standard,
is 1..200000000 for 802.1t standard, and is 1..200000
for the legacy standard.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.4 |
hwMstpiDesignatedRootThe Bridge Identifier of the Root Bridge for the port of the Spanning
Tree instance identified by the MSTIDro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.5 |
hwMstpiDesignatedCostThe path cost of the designated port of the segment connected to
this port. This value is compared to the Root Path Cost field
in received bridge BPDUs.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.6 |
hwMstpiDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to
be the Designated Bridge for this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.7 |
hwMstpiDesignatedPortThe port Identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.8 |
hwMstpiStpPortEdgeportWhether the port fast is enabled. By default, there is no configuration on the port.
When the port is the edge port, it can change to forwarding state .
We can set the value. Disable indicates that we make the port not
to be a edge port. Enable indicates that we make the port to be a
edge port. The port's edge port state is same in all instance of MSTP.
When set the value, the hwMstpInstanceID must be 0.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.9 |
hwMstpiStpPortPointToPointWhether the port connects the point to point link.
If user set the port as a point to point port,
the port is a point to point port in all instance of the MSTP.
If user set the port as a point to point port but the port isn't,
the mstp may import temporary loop. So user can use the default.
When set the value, the hwMstpInstanceID must be 0.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.10 |
hwMstpiStpMcheckWhen root interface is changed from STP mode to MSTP mode, the appointed interface
can not switch to MSTP mode automatically. At the time, you need switch to MSTP mode
with hand by set Mcheck value to enable(1). The value of hwMstpiStpMcheck is unused(65535)
when it is read.The value of hwMstpiStpMcheck must be enable(1) when it is set.
When set the value, the hwMstpInstanceID must be 0.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.11 |
hwMstpiStpTransLimitThe value is used to set BPDU maximum transmission rate of the port .
When the value is set, the hwMstpInstanceID must be 0.
If value is set 0, the transmit limit of the port is equal to the hwMstpTransmitLimitDefault value.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.12 |
hwMstpiStpRXStpBPDUThe number of received Config BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.13 |
hwMstpiStpTXStpBPDUThe number of transmitted Config BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.14 |
hwMstpiStpRXTCNBPDUThe number of received TCN BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.15 |
hwMstpiStpTXTCNBPDUThe number of transmitted TCN BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.16 |
hwMstpiStpRXRSTPBPDUThe number of received RST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.17 |
hwMstpiStpTXRSTPBPDUThe number of transmitted RST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.18 |
hwMstpiStpRXMSTPBPDUThe number of received MST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.19 |
hwMstpiStpTXMSTPBPDUThe number of transmitted MST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.20 |
hwMstpiStpClearStatisticsClear the spanning tree statistic. Effective in CIST.
The value of hwMstpiStpClearStatistics is unused(65535) when it is read.
The value of hwMstpiStpClearStatistics must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.21 |
hwMstpiStpDefaultPortCostSet default port path cost.
The value of hwMstpiStpDefaultPortCost is unused(65535) when it is read.
The value of hwMstpiStpDefaultPortCost must be reset(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.22 |
hwMstpiStpStatusWhether the spanning tree protocol is enabled on this port.
Effective in CIST. When set the value, the hwMstpInstanceID must be 0.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.23 |
hwMstpiPortRootGuardWhether the root guard is enabled.
The function is to prevent the port from receiving the BPDU
, the priority of which is above the priority of the port.
When set the value, the hwMstpInstanceID must be 0.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.24 |
hwMstpiPortLoopGuardWhether the loop protection is enabled. When set the value, the hwMstpInstanceID must be 0.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.25 |
hwMstpPortComplianceThe value of this object identifies the protocol format of the MSTP packet sent and received on the port.
The protocol format can be one of the following:
1: auto (the self-adaptive protocol format)
2: dotls (the standard IEEE 802.1s format)
3: legacy (the private protocol format)
By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1).rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.26 |
hwMstpConfigDigestSnoopingThis object indicates whether the digest snooping function is enabled on the port:
1: enabled
2: disabled
By default, the function is not enabled. In other words, the default value is disabled(2).rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.27 |
hwMstpNoAgreementCheckWhether enhance agreement is enabled.
When Huawei datacomm devices running the VRP are internetworking
with non-Huawei devices, you need to enable this on Huawei devices
to configure the mode of the fast transition mechanism the same as
that on non-Huawei devices.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.30 |
hwMstpPortTCNotifyThe main interface notifies its sub-interfaces to update
MAC entries and ARP entries after receiving a TC message.
This prevents services from being interrupted.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.31 |
hwMstpiStpPortBpduFilterWhether the port BPDU-filter is enabled. By default, there is no configuration on the port.
The port will not send or receive BPDUs.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.32 |
hwMstpiPortRoleIndicates the port role on a particular instance.ro Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.20.1.33 |
hwMstpSnoopingwhen the device's interface receive TCN, the servers is normal in device where MSTP is disable.
By default, the value is disabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.21 |
hwMstpAccessoryTableThe table of MSTP Accessory Information. SEQUENCE OF HwMstpAccessoryEntry .1.3.6.1.4.1.2011.5.25.42.4.1.22 |
hwMstpAccessoryEntryThe table entry of MSTP Accessory Information. HwMstpAccessoryEntry .1.3.6.1.4.1.2011.5.25.42.4.1.22.1 |
hwMstpAccessoryIndexThe index of the Accessory Commands of MSTP. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.22.1.1 |
hwMstpBackupReplyAgreementWhen the port of device, which played the backup or alternate role, receives the BPDU message with
high priority, and the proposal flag of this message was set.
The BPDU message can be send from this port immediately, the agreement flag was set of this BPDU message.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.22.1.2 |
hwMstpStpNoAgreementCheckwhen the port is root, calculating allsyned without check syned flag of root.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.22.1.3 |
hwMstpProTableThe MSTP process information table. SEQUENCE OF HwMstpProEntry .1.3.6.1.4.1.2011.5.25.42.4.1.23 |
hwMstpProEntryEntry of the MSTP process information table. HwMstpProEntry .1.3.6.1.4.1.2011.5.25.42.4.1.23.1 |
hwMstpProIDMSTP process identifier. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.1 |
hwMstpProStpStateWhether Spannting-Tree is enabled or not on a MSTP process.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.4 |
hwMstpProPriorityThe priority for the MSTP process spanning tree, step of 4096.
For example, we can set the Priority of the bridge such as 0, 4096, 8192 etc.
It can be used to determined whether the process is the root of
the whole spanning tree. The default value is 32768.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.5 |
hwMstpProRootTypeConfig this MSTP process as a primary root, secondary root or cancel
the root for spanning tree. The default value is not a primary or secondary root.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.6 |
hwMstpProForceVersionMode of Spanning-Tree portocol on a MSTP process.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.7 |
hwMstpProBpduGuardWhether BPDU portection is enabled or not on a MSTP process.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.8 |
hwMstpProDiameterThe Spanning-Tree diameter of a MSTP process, the default value
is 7.
The value of hwMstpProDiameter is only unused(65535) when it is
read.rw Integer32 (2..7 | 65535) .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.9 |
hwMstpProConvergeModeSpanning-Tree converge mode. When the mode is fast, MAC entries and ARP entries
will be deleted. When the mode is normal, the entries will be aged.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.10 |
hwMstpProMaxHopsMaxhops of a MSTP process, the default value is 20.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.11 |
hwMstpProMCheckWhether to do Mcheck function on a MSTP process.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.12 |
hwMstpProPathCostStandardPath cost standard of a MSTP process, the fault value is dot1t.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.13 |
hwMstpProHelloTimeHello time of a MSTP process, the default value is 200 centiseconds.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.14 |
hwMstpProFwdDelayForward delay of a MSTP process, the default value is 1500 centiseconds.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.15 |
hwMstpProMaxAgeMax age of a MSTP process, the default value is 2000 centiseconds.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.16 |
hwMstpProTimerFactorTimer factor, which is used in loop protection, the default value is 3.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.17 |
hwMstpProTCNotifyThe current MSTP process notifies the specified STP instance
in MSTP process 0 to update MAC entries and ARP entries after
receiving a TC message. This prevents services from being interrupted.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.18 |
hwMstpProNoLinkSharePortListThe port list participates in the status calculation of
a specified MSTP process witch no-link-share method.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.19 |
hwMstpProLinkSharePortListThe port list participates in the status calculation of
a specified MSTP process witch link-share method.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.20 |
hwMstpProTcGuardWhether the TC protection function is enabled on the MSTP process.
If the function is enabled, the TC message exceeded threshold will
be defered to deal with at the end of TC protection time.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.21 |
hwMstpProTcGuardThresholdThe threshold of the TC protection on the MSTP process. It decided
the maximum TC messages can be dealt with in a TC protection time.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.22 |
hwMstpProTcNotifyProcessWhether the current MSTP process notifies MSTP process 0 to update
MAC entries and ARP entries after receiving a TC message.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.23 |
hwMstpProRegionConfActiveActive the region configuration.
Generally, the value of the hwMstpProRegionConfActive is disable,
but the value will be set as enable if Net Manager want to
active the configure of the region in the bridge. And then
all manager configuration will change to operable configuration.
The value of hwMstpRegionConfActive is only disable when it is read.
It is only enable when it is set.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.24 |
hwMstpProLinkShareGuardWhether the Link-share Guard function is enabled on the MSTP process.
If the function is enabled, the root Guard function will also
work on port in all instance besides instance 0, when the link
between the ports either of which is in Link_share mode broken down.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.25 |
hwMstpConfigDegistThis MSTP region-configuration digest.
It can be used to determine whether
the region is the same region with
another one.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.26 |
hwMstpProRegionConfShareSuggesting that whether all the process will share the same Region-config with process 0.
If the function is enable, all the existing process will share the same Region-config with process 0.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.27 |
hwMstpProRowStatusMSTP process table rowstatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.30 |
hwMstpProTcGuardIntervalThe value is the tc-protection interval time.
If the value is set 0, the tc guard interval value is euqal to the hello time.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.23.1.31 |
hwMstpPortBindTableThe port bind table. SEQUENCE OF HwMstpPortBindEntry .1.3.6.1.4.1.2011.5.25.42.4.1.24 |
hwMstpPortBindEntryThe port bind entry. HwMstpPortBindEntry .1.3.6.1.4.1.2011.5.25.42.4.1.24.1 |
hwMstpPortId1The port external port index. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.1 |
hwMstpPortId2The port external port index. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.2 |
hwMstpPortId3The port external port index. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.3 |
hwMstpPortId4The port external port index. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.4 |
hwMstpPortIdFlagThe port type. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.5 |
hwMstpPortVlanListLowThe VLAN list of port.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.6 |
hwMstpPortVlanListHighThe VLAN list of port.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.7 |
hwMstpProNewPortTypeAn interface to participate in the status calculation of
link-share , no-link-share or no-link-share with VLAN Spanning Tree processes.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.8 |
hwMstpProNewPortBpduVlanThe VLAN of port is BPDU VLAN.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.9 |
hwMstpPortBindRowStatusMSTP port binding table rowstatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.42.4.1.24.1.100 |
hwMstpProPortTableThe table includes the information of the port
of the MSTP process. SEQUENCE OF HwMstpProPortEntry .1.3.6.1.4.1.2011.5.25.42.4.1.25 |
hwMstpProPortEntryThe entry of the MSTP process port information table. HwMstpProPortEntry .1.3.6.1.4.1.2011.5.25.42.4.1.25.1 |
hwMstpProPortStateThe current state of the port in MSTP process.
It must be disabled, discarding, learning or forwarding.ro Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.2 |
hwMstpProPortPriorityThe value of the priority field which is contained in the
first (in network byte order) four bits of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value of hwMstpiPortIndex.
And step of 16. It is the priority of the port in the MSTP process,
and it can be used to determine the role of the port in the MSTP process Spanning Tree.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.3 |
hwMstpProPortPathCostThe path cost of paths with which the package passes the port.
The range of path cost is 1..65535 for 802.1d standard,
is 1..200000000 for 802.1t standard, and is 1..200000
for the legacy standard.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.4 |
hwMstpProPortDesignatedRootThe Bridge Identifier of the Root Bridge for the port of the
MSTP process Spanning Tree.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.5 |
hwMstpProPortDesignatedCostThe path cost of the designated port of the segment connected to
this port. This value is compared to the Root Path Cost field
in received bridge BPDUs.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.6 |
hwMstpProPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to
be the Designated Bridge for this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.7 |
hwMstpProPortDesignatedPortThe Port Identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.8 |
hwMstpProPortStpEdgeportWhether the port fast is enabled in the MSTP process. When the
port is the edge port, it can change to forwarding state immediately.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.9 |
hwMstpProPortStpPointToPointWhether the port connects the point to point link.
If user set the port as a point to point port,
the port is a point to point port in the MSTP process.
If user set the port as a point to point port but the port isn't,
the mstp may import temporary loop. So user can use the default.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.10 |
hwMstpProPortStpMcheckWhen root interface is changed from STP mode to RSTP or MSTP mode, the
appointed interface can not switch to RSTP or MSTP mode automatically.
At the time, you need switch back with hand by set Mcheck value to enable(1).
The value unused(65535) when it is read.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.11 |
hwMstpProPortStpTransLimitThe value used by the port transmit state machine to limit
the maximum transmission rate.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.12 |
hwMstpProPortStpRXStpBPDUThe number of received Config BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.13 |
hwMstpProPortStpTXStpBPDUThe number of transmitted Config BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.14 |
hwMstpProPortStpRXTCNBPDUThe number of received TCN BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.15 |
hwMstpProPortStpTXTCNBPDUThe number of transmitted TCN BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.16 |
hwMstpProPortStpRXRSTPBPDUThe number of received RST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.17 |
hwMstpProPortStpTXRSTPBPDUThe number of transmitted RST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.18 |
hwMstpProPortStpRXMSTPBPDUThe number of received MST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.19 |
hwMstpProPortStpTXMSTPBPDUThe number of transmitted MST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.20 |
hwMstpProPortStpClearStatisticsClear the Spanning Tree statistics in specified MSTP process.
The value is unused(65535) when it is read.
The value must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.21 |
hwMstpProPortStpDefaultPortCostSet default port path cost.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.22 |
hwMstpProPortStpStatusWhether the Spanning Tree Protocol is enabled on this port.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.23 |
hwMstpProPortRootGuardWhether the root guard is enabled. The function is to prevent
the port from receiving the BPDUs, the priority of which is
above the priority of the port.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.24 |
hwMstpProPortLoopGuardWhether the loop protection is enabled.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.25 |
hwMstpProPortComplianceThe value of this object identifies the protocol format of the MSTP packet sent and received on the port.
The protocol format can be one of the following:
1: auto (the self-adaptive protocol format)
2: dotls (the standard IEEE 802.1s format)
3: legacy (the private protocol format)
By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1).rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.26 |
hwMstpProPortConfigDigestSnoopingThis object indicates whether the digest snooping function is enabled on the port:
1: enabled
2: disabled
By default, the function is not enabled. In other words, the default value is disabled(2).rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.27 |
hwMstpProPortNoAgreementCheckWhether enhance agreement is enabled.
When Huawei datacomm devices running the VRP are internetworking
with non-Huawei devices, you need to enable this on Huawei devices
to configure the mode of the fast transition mechanism the same as
that on non-Huawei devices.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.30 |
hwMstpProPortTCNotifyThe main interface notifies its sub-interfaces to update
MAC entries and ARP entries after receiving a TC message.
This prevents services from being interrupted.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.31 |
hwMstpProPortTypeAn interface to participate in the status calculation of
link-share or no-link-share Spanning Tree processes.ro Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.25.1.32 |
hwMstpTcGuardWhether the Bridge TC Guard function is enabled.
If the function is enabled, the TC message in each instance exceeded
threshold will be defered to deal with at the end of TC protection time.
By default, the function is disabled.rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.26 |
hwMstpTcGuardThresholdThe threshold of the Bridge TC Guard. It decided the maximum TC
message in each instance can be dealt with in a TC protection
time.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.27 |
hwMstpProInstanceTableThe MSTP process instance information table. SEQUENCE OF HwMstpProInstanceEntry .1.3.6.1.4.1.2011.5.25.42.4.1.28 |
hwMstpProInstanceEntryThe entry of the MSTP process instance information table. HwMstpProInstanceEntry .1.3.6.1.4.1.2011.5.25.42.4.1.28.1 |
hwMstpProInstanceBridgeIDThe Bridge Identifier for the spanning tree instance
identified by MSTID.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.1 |
hwMstpProInstanceBridgePriorityThe Bridge Priority for the spanning tree instance
identified by MSTID. Step of 4096.For example,
we can set the Priority of the bridge such as 0, 4096, 8192 etc.
It can be used to determined whether the bridge is the root of
the spanning tree.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.2 |
hwMstpProInstanceDesignedRootThe Bridge Identifier of the Root Bridge for the spanning
tree instance identified by MSTID.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.3 |
hwMstpProInstanceRootPathCostThe path cost from the transmitting Bridge to the Root Bridge
for the spanning tree instance identified by MSTID.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.4 |
hwMstpProInstanceRootPortThe root port for the spanning tree instance identified by the MSTID.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.5 |
hwMstpProInstanceRootTypeConfig this Bridge as a primary root or secondary root / cancel
the root for this spanning tree instance identified by MSTID.
The current value of the hwMstpiRootType is the value
that was set recently.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.6 |
hwMstpProInstanceRemainingHopsThe remaining hops of the spanning tree instance identified by MSTID.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.7 |
hwMstpProInstanceAdminMappedVlanListLowThe lower part of administrative VLAN list mapped to the spanning
tree instance identified by MSTID.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.8 |
hwMstpProInstanceAdminMappedVlanListHighThe higher part of administrative VLAN list mapped to the spanning
tree instance identified by MSTID.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.9 |
hwMstpProInstanceOperMappedVlanListLowThe lower part of operative VLAN list mapped to the spanning
tree instance identified by MSTID.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.10 |
hwMstpProInstanceOperMappedVlanListHighThe higher part of operative VLAN list mapped to the spanning
tree instance identified by MSTID.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.11 |
hwMstpProInstanceRowStatusTo band MSTI and VLAN List. Operation of CreateAndGo can be
used to create a new instance, and operation of Destroy be
used to destroy an existent instance. But these operation
won't be effective if they are not actived by executing
command of active region-configuration or setting mib
node of hwMstpRegionConfActive.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.42.4.1.28.1.100 |
hwMstpProNewPortTableThe table includes the information of the port
of the MSTP process. SEQUENCE OF HwMstpProNewPortEntry .1.3.6.1.4.1.2011.5.25.42.4.1.29 |
hwMstpProNewPortEntryThe entry of the MSTP process port information table. HwMstpProNewPortEntry .1.3.6.1.4.1.2011.5.25.42.4.1.29.1 |
hwMstpProNewPortStateThe current state of the port in MSTP process.
It must be disabled, discarding, learning or forwarding.ro Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1 |
hwMstpProNewPortPriorityThe value of the priority field which is contained in the
first (in network byte order) four bits of the (2 octet long) Port ID.
The other octet of the Port ID is given by the value of hwMstpiPortIndex.
And step of 16. It is the priority of the port in the MSTP process,
and it can be used to determine the role of the port in the MSTP process Spanning Tree.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2 |
hwMstpProNewPortPathCostThe path cost of paths with which the package passes the port.
The range of path cost is 1..65535 for 802.1d standard,
is 1..200000000 for 802.1t standard, and is 1..200000
for the legacy standard.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3 |
hwMstpProNewPortDesignatedRootThe Bridge Identifier of the Root Bridge for the port of the
MSTP process Spanning Tree.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4 |
hwMstpProNewPortDesignatedCostThe path cost of the designated port of the segment connected to
this port. This value is compared to the Root Path Cost field
in received bridge BPDUs.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5 |
hwMstpProNewPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to
be the Designated Bridge for this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6 |
hwMstpProNewPortDesignatedPortThe port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7 |
hwMstpProNewPortStpEdgeportWhether the port fast is enabled in the MSTP process. By default, there is no configuration on the port. When the
port is the edge port, it can change to forwarding state immediately.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8 |
hwMstpProNewPortStpPointToPointWhether the port connects the point to point link.
If user set the port as a point to point port,
the port is a point to point port in the MSTP process.
If user set the port as a point to point port but the port isn't,
the mstp may import temporary loop. So user can use the default.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9 |
hwMstpProNewPortStpMcheckWhen root interface is changed from STP mode to RSTP or MSTP mode, the
appointed interface can not switch to RSTP or MSTP mode automatically.
At the time, you need switch back with hand by set Mcheck value to enable(1).
The value unused(65535) when it is read.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10 |
hwMstpProNewPortStpTransLimitThe value is used to set BPDU maximum transmission rate of the port.
If value is set 0, the transmit limit of the port is equal to the wMstpTransmitLimitDefault valuerw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11 |
hwMstpProNewPortStpRXStpBPDUThe number of received Config BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12 |
hwMstpProNewPortStpTXStpBPDUThe number of transmitted Config BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13 |
hwMstpProNewPortStpRXTCNBPDUThe number of received TCN BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14 |
hwMstpProNewPortStpTXTCNBPDUThe number of transmitted TCN BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15 |
hwMstpProNewPortStpRXRSTPBPDUThe number of received RST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16 |
hwMstpProNewPortStpTXRSTPBPDUThe number of transmitted RST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17 |
hwMstpProNewPortStpRXMSTPBPDUThe number of received MST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18 |
hwMstpProNewPortStpTXMSTPBPDUThe number of transmitted MST BPDUs.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19 |
hwMstpProNewPortStpClearStatisticsClear the Spanning Tree statistics in specified MSTP process.
The value is unused(65535) when it is read.
The value must be clear(1) when it is set.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20 |
hwMstpProNewPortStpDefaultPortCostSet default port path cost.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21 |
hwMstpProNewPortStpStatusWhether the Spanning Tree Protocol is enabled on this port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22 |
hwMstpProNewPortRootGuardWhether the root guard is enabled. The function is to prevent
the port from receiving the BPDUs, the priority of which is
above the priority of the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23 |
hwMstpProNewPortLoopGuardWhether the loop protection is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24 |
hwMstpProNewPortComplianceThe value of this object identifies the protocol format of the MSTP packet sent and received on the port.
The protocol format can be one of the following:
1: auto (the self-adaptive protocol format)
2: dotls (the standard IEEE 802.1s format)
3: legacy (the private protocol format)
By default, the protocol format of the MSTP packet is self-adaptive, that is, auto(1).rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25 |
hwMstpProNewPortConfigDigestSnoopingThis object indicates whether the digest snooping function is enabled on the port:
1: enabled
2: disabled
By default, the function is not enabled. In other words, the default value is disabled(2).rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26 |
hwMstpProNewPortNoAgreementCheckWhether enhance agreement is enabled.
When Huawei datacomm devices running the VRP are internetworking
with non-Huawei devices, you need to enable this on Huawei devices
to configure the mode of the fast transition mechanism the same as
that on non-Huawei devices.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27 |
hwMstpProNewPortVplsSubinterfaceEnableThe main interface notifies its sub-interfaces to update
MAC entries and ARP entries after receiving a TC message.
This prevents services from being interrupted.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28 |
hwMstpProNewPortBpduEncapsulationThe value of this object identifies the protocol format of the BPDU sent on the port.
The protocol format can be one of the following:
1: vbst (the VBST format)
2: stp (the STP format)
By default, the BPDU format of the MSTP packet is stp(2).rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.29 |
hwMstpProNewPortBpduFilterWhether the port BPDU-filter is enabled. By default, there is no configuration on the port.
The port will not send or receive BPDUs.rw Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30 |
hwMstpProNewPortStpRXTCThe number of TC BPDUs received by the port.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31 |
hwMstpProNewPortStpTXTCThe number of TC BPDUs sent by the port.ro Counter32 .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32 |
hwMstpProNewPortRoleIndicates the port role on a particular instance.ro Enumeration .1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33 |
hwMstpEdgedPortDefaultWhen the stp edged-port default is enabled.
By default,the port enabled stp is edged-port .rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.30 |
hwMstpBpduFilterPortDefaultWhen the stp BPDU-filter default is enabled.
By default,the stp BPDU filter function is enabled .rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.31 |
hwMstpTransmitLimitDefaultThe value is used to set BPDU maximum transmission rate of all port in the device.rw Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.32 |
hwMstpPwNamePw namero OCTET STRING .1.3.6.1.4.1.2011.5.25.42.4.1.33 |
hwMstpPortTcSnoopingTableThe table includes the information of the port
of the STP TC snooping. SEQUENCE OF HwMstpPortTcSnoopingEntry .1.3.6.1.4.1.2011.5.25.42.4.1.34 |
hwMstpPortTcSnoopingEntryThe entry of the MSTP TC snooping port information table. HwMstpPortTcSnoopingEntry .1.3.6.1.4.1.2011.5.25.42.4.1.34.1 |
hwMstpPortIfIndexThe ifIndex of the port. Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.34.1.1 |
hwMstpPortTcSnoopingNotifyTrillThis object indicates whether the TC snooping notify TRILL function is enabled on the port:
1: enabled
2: disabled
By default, the function is not enabled. In other words, the default value is disabled(2).rw HwMSTPEnabledStatus .1.3.6.1.4.1.2011.5.25.42.4.1.34.1.2 |
hwMstpPortCountUpperThresholdThe value of this object identifies the upper threshold for the number of Up STP-capable interfaces.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.35 |
hwMstpPortCountLowerThresholdThe value of this object identifies the lower threshold for the number of Up STP-capable interfaces.ro Integer32 .1.3.6.1.4.1.2011.5.25.42.4.1.36 |
hwMstpTrapsDefinition point for Mstp notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.42.4.2 |
hwMstpiPortStateForwardingThe SNMP trap that is generated when a port turns into
forwarding state from other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.1 |
hwMstpiPortStateDiscardingThe SNMP trap that is generated when a port turns into
discarding state from forwarding state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.2 |
hwMstpiBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer
the root bridge of the instance. Another switch with higher
priority has already been the root bridge of the instance. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.3 |
hwMstpiPortRootGuardedThe SNMP trap that is generated when a root-guard port
receives a superior message on the relevant instance. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.4 |
hwMstpiPortBpduGuardedThe SNMP trap that is generated when an edged port of
the BPDU-guard switch receives BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.5 |
hwMstpiPortLoopGuardedThe SNMP trap that is generated when an Alternate-Port
or Root-Port is aged out. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.6 |
hwMstpiEdgePortChangedWhen the edged-port receives a BPDU packet, the edged-port attribute will be disabled.
Then the SNMP trap is generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.7 |
hwMstpProPortStateForwardingThe SNMP trap that is generated when a port turns into
forwarding state from other state in the MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.8 |
hwMstpProPortStateDiscardingThe SNMP trap that is generated when a port turns into
discarding state from forwarding state in the MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.9 |
hwMstpProBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer
the root bridge of the MSTP process Spanning Tree. Another
switch with higher priority has already been the root bridge. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.10 |
hwMstpProPortRootGuardedThe SNMP trap that is generated when a root-guard port
receives a superior message in the MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.11 |
hwMstpProPortBpduGuardedThe SNMP trap that is generated when an edged port of
the BPDU-guard MSTP process receives BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.12 |
hwMstpProPortLoopGuardedThe SNMP trap that is generated when an Alternate-Port
or Root-Port is aged out in the MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.13 |
hwMstpProEdgePortChangedWhen the edged-port receives a BPDU packet, the edged-port attribute will be disabled.
Then the SNMP trap is generated. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.14 |
hwMstpiTcGuardedThe SNMP trap that is generated when an MSTP instance receive TC BPDUs' number
exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.15 |
hwMstpProTcGuardedThe SNMP trap that is generated when an MSTP process receive TC BPDUs' number
exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.16 |
hwMstpProRootChangedThe SNMP trap that is generated when the root bridge of
an instance of a MSTP process changed NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.17 |
hwMstpProNewPortStateForwardingSpecify that the status of the port STP becomes Forwarding in MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.18 |
hwMstpProNewPortStateDiscardingSpecify that the status of the port STP becomes Discarding in MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.19 |
hwMstpProNewBridgeLostRootPrimarySpecify that the switch loses the position of root bridge in MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.20 |
hwMstpProNewPortRootGuardedSpecify that a designated port receives a BPDU packet with the priority higher than that of the root bridge when root bridge protection is enabled in MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.21 |
hwMstpProNewPortBpduGuardedSpecify that the edge port receives the BPDU packets when BPDU protection was enabled in MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.22 |
hwMstpProNewPortLoopGuardedSpecify that the root port has not received any BPDU packets for a long time when loop protection is enabled in MSTP process. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.23 |
hwMstpProNewEdgePortChangedSpecify that the edge port is invalid because of receiving a BPDU packet. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.24 |
hwMstpProLoopbackDetectedWhen port detected loopback, block the port and arise trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.25 |
hwMstpPortCountExceedThresholdThis notification indicates that the number of Up STP-capable interfaces exceeded the upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.26 |
hwMstpPortCountExceedThresholdResumeThis notification indicates that the number of Up STP-capable interfaces fell below the lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.42.4.2.27 |
hwMstpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.42.4.3 |
hwMstpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.42.4.3.1 |
hwMstpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.42.4.3.2 |