HUAWEI-PW-CMD-MIB
AI MIB Summary
The HUAWEI-PW-CMD-MIB module provides management and monitoring capabilities for Pseudo Wire Emulation (PWE3) sessions on Huawei devices, specifically tracking the status, configuration, and operational state of Layer 2 VPN services established via MPLS using LDP or RSVP-TE signaling for ATM and Ethernet emulation.
Pseudo Wire Emulation Edge-to-Edge (PWE3) is an end-to-end L2 service bearing technology, that belongs to L2 VPN in the P2P mode. The system implements the PWE3 architecture through MPLS, by using the LDP or RSVP-TE protocol as signaling. Therefore, it can implement the ATM and Ethernet emulation services and establish the ATM or Ethernet private lines. Thus, it provides a solution to the emulation private line service in the IP network.
Main OID:
hwPwCmdMIB.1.3.6.1.4.1.2011.5.12.8.1
345
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
345 total| Object Name |
|---|
hwPw OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8 |
hwPwCmdMIBPseudo Wire Emulation Edge-to-Edge (PWE3) is an end-to-end L2 service bearing technology,
that belongs to L2 VPN in the P2P mode. The system implements the PWE3 architecture through MPLS, by
using the LDP or RSVP-TE protocol as signaling. Therefore, it can implement the ATM and Ethernet emulation
services and establish the ATM or Ethernet private lines. Thus, it provides a solution to the emulation private
line service in the IP network. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.12.8.1 |
hwPwCmdVcNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.1 |
hwPwCmdVcSwitchWtoPThis notification is generated when switch from working
pw to protect pw happens. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.1.1 |
hwPwCmdVcSwitchPtoWThis notification is generated when switch from protect
pw to working pw happens. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.1.2 |
hwPwCmdVcUpThis notification is generated when the vc status
change from other status to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.1.3 |
hwPwCmdVcDownThis notification is generated when the vc status
change from other status to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.1.4 |
hwPwCmdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.2 |
hwPwCmdVcIndexNextThis object contains an appropriate value to be used
for hwPwCmdVcIndex when creating entries in the
hwPwCmdVcTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of hwPwCmdVcIndex for a new entry in the
hwPwCmdVcTable, the manager issues a management
protocol retrieval operation to obtain the current
value of hwPwCmdVcIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.1 |
hwPwCmdVcTableThis table specifies information for configuring and
status monitoring that are common to all service types.
The index of this table is hwPwCmdVcIndex. SEQUENCE OF HwPwCmdVcEntry .1.3.6.1.4.1.2011.5.12.8.1.2.2 |
hwPwCmdVcEntryThis table specifies information for configuring and
status monitoring that are common to all service types.
The index of this entry is hwPwCmdVcIndex. HwPwCmdVcEntry .1.3.6.1.4.1.2011.5.12.8.1.2.2.1 |
hwPwCmdVcIndexIndex for the conceptual row identifying a PW within
this PW Emulation table. Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.1 |
hwPwCmdVcSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.2 |
hwPwCmdVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.3 |
hwPwCmdVcTypeThis value indicate the service to be carried over
this PW.rw PwVcType (HUAWEI-PW-TC-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.4 |
hwPwCmdVcPeerAddrTypeDenotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.5 |
hwPwCmdVcPeerAddrThis object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeros if not applicable
(hwPwCmdVcPeerAddrType is 'unknown').rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.6 |
hwPwCmdVcStatusIndicates the status of the PW in the local node.ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.7 |
hwPwCmdVcInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1023
It may be set up manually if owner is 'manual' or automatically
otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.8 |
hwPwCmdVcOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1023
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.9 |
hwPwCmdVcSwitchSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.10 |
hwPwCmdVcSwitchIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch pw.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.11 |
hwPwCmdVcSwitchPeerAddrTypeDenotes the address type of the peer node of the switch pw.
It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.12 |
hwPwCmdVcSwitchPeerAddrThis object contains the value of the peer node address of the
switch pw of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeros if not applicable
(hwPwCmdVcSwitchPeerAddrType is 'unknown').rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.13 |
hwPwCmdVcSwitchInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1023
It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.14 |
hwPwCmdVcSwitchOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1023
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.15 |
hwPwCmdVcGroupIDUsed in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.16 |
hwPwCmdVcIfIndexIndex of the interface (or the virtual interface)
associated with the PW.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.17 |
hwPwCmdVcAcStatusLocal AC status.
Options:
1. down(1) -indicates AC status down
2. up(2) -indicates AC status up
3. plugout(3) -indicates AC status plugoutro Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.18 |
hwPwCmdVcMtuIf not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
PW.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.19 |
hwPwCmdVcCwIf signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.20 |
hwPwCmdVcVCCVIndicates the optional VCCV capabilities of the pw.
Options:
1. ccCw(0)
2. ccAlert(1)
3. ccLabel(2)
4. cvIcmpping(3)
5. cvLspping(4)
6. cvBfd(5)rw Bits .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.21 |
hwPwCmdVcBandwidthIndicates the bandwidth when signaling protocol is rsvp.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.22 |
hwPwCmdVcMaxAtmCellsIndicates the max cell supported when vctype is atm.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.23 |
hwPwCmdVcTnlPolicyNameIndicates the tunnel policy name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.24 |
hwPwCmdVcQoSBehaviorIndexIndicates the traffic behavior Index when QOS is implemented.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.25 |
hwPwCmdVcExplicitPathNameIndicates the explicit path name set by the operator.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.26 |
hwPwCmdVcTemplateIndexIndicates the pw template index referenced.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.27 |
hwPwCmdVcSecondaryIndicates whether or not the secondary pw is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.28 |
hwPwCmdVcUpTimeSpecifies the total time this PW status has been
Up(1).ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.29 |
hwPwCmdVcRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.2.1.30 |
hwPwCmdVcTnlTableThis table provides per-PW related tunnel information.
The indexes of this table are hwPwCmdVcIndex and hwPwCmdVcTnlIndex,
hwPwCmdVcIndexis set in hwPwCmdVcTable table. SEQUENCE OF HwPwCmdVcTnlEntry .1.3.6.1.4.1.2011.5.12.8.1.2.3 |
hwPwCmdVcTnlEntryThis table provides per-PW related tunnel information.
The indexes of this entry are hwPwCmdVcIndex and hwPwCmdVcTnlIndex,
hwPwCmdVcIndexis set in hwPwCmdVcTable table. HwPwCmdVcTnlEntry .1.3.6.1.4.1.2011.5.12.8.1.2.3.1 |
hwPwCmdVcTnlIndexIndicates the tunnel index related to each PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.3.1.1 |
hwPwCmdRemoteVcTableThis table provides remote PW information for
each local PW.The index of this table is hwPwCmdRemoteVcID. SEQUENCE OF HwPwCmdRemoteVcEntry .1.3.6.1.4.1.2011.5.12.8.1.2.4 |
hwPwCmdRemoteVcEntryThis table provides remote PW information for
each local PW.The index of this entry is hwPwCmdRemoteVcID. HwPwCmdRemoteVcEntry .1.3.6.1.4.1.2011.5.12.8.1.2.4.1 |
hwPwCmdRemoteVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the remote PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.1 |
hwPwCmdRemoteVcTypeThis value indicate the service to be carried over
the remote PW.ro PwVcType (HUAWEI-PW-TC-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.2 |
hwPwCmdRemoteVcStatusIndicates the status of the remote PW.ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.3 |
hwPwCmdRemoteVcGroupIDIndicates the Group ID field of the remote PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.4 |
hwPwCmdRemoteVcMtuIndicates the supported MTU size of the remote PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.5 |
hwPwCmdRemoteVcCwIndicates the control word capability of the remote PW.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.6 |
hwPwCmdRemoteVcMaxAtmCellsIndicates the max cell supported of the remote PW
when vctype is atm.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.7 |
hwPwCmdRemoteVcNotifIndicates notification is supported by the remote PW.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.8 |
hwPwCmdRemoteVcSwitchIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.9 |
hwPwCmdRemoteVcSwitchTypeThis value indicate the service to be carried over
the switch PW.ro PwVcType (HUAWEI-PW-TC-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.10 |
hwPwCmdRemoteVcSwitchStatusIndicates the status of the switch PW.ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.11 |
hwPwCmdRemoteVcSwitchGroupIDIndicates the Group ID field of the switch PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.12 |
hwPwCmdRemoteVcSwitchMtuIndicates the supported MTU size of the switch PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.13 |
hwPwCmdRemoteVcSwitchCwIndicates the control word capability of the switch PW.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.14 |
hwPwCmdRemoteVcSwitchMaxAtmCellsIndicates the max cell supported of the switch PW
when vctype is atm.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.15 |
hwPwCmdRemoteVcSwitchNotifIndicates notification is supported by the switch PW.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.4.1.16 |
hwPwCmdAcBindingTableThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this table are hwPwCmdAcBindingConnectIndex and hwPwCmdAcBindingPrimOrSecondary. SEQUENCE OF HwPwCmdAcBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.5 |
hwPwCmdAcBindingEntryThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are hwPwCmdAcBindingConnectIndex and hwPwCmdAcBindingPrimOrSecondary. HwPwCmdAcBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.5.1 |
hwPwCmdAcBindingConnectIndexIndicates the connect index referenced.
Range: 1-32768 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.1 |
hwPwCmdAcBindingVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Range: 1-4294967295rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.2 |
hwPwCmdAcBindingVcStatusIndicates the status of the PW:
down(1),
up(2),
plugout(3).ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.3 |
hwPwCmdAcBindingTemplateNameIndicates the description string of the template,
MUST be NULL string if not applicable or not known yet.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.4 |
hwPwCmdAcBindingOutboundVpiVPI value of this ATM VC.
Range: 0-4095
If the pwVcType is atmNto1Transparent then the value
will be set to zero.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.5 |
hwPwCmdAcBindingOutboundVciVCI value of this ATM VC.
Range: 32-65535
If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or
atmCellNto1Vpc then the value should be set to zero.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.6 |
hwPwCmdAcBindingSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.7 |
hwPwCmdAcBindingOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1048575
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.8 |
hwPwCmdAcBindingInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1048575
It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.9 |
hwPwCmdAcBindingRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.10 |
hwPwCmdAcBindingPrimOrSecondaryThis value indicate Primary PW or Secondary PW.
Options:
1. primaryPW(1) -indicates primary PW
2. secondaryPW(2) -indicates secondary PW Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.5.1.11 |
hwPwCmdTemplateIndexNextThis object contains an appropriate value to be used
for hwPwCmdTemplateIndex when creating entries in the
hwPwCmdTemplateTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of hwPwCmdTemplateIndex for a new entry in the
hwPwCmdTemplateTable, the manager issues a management
protocol retrieval operation to obtain the current
value of hwPwCmdVcIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse.ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.6 |
hwPwCmdTemplateTableThis table specifies information for configuring and
status monitoring to pw template.
The index of this table is hwPwCmdTemplateIndex. SEQUENCE OF HwPwCmdTemplateEntry .1.3.6.1.4.1.2011.5.12.8.1.2.7 |
hwPwCmdTemplateEntryThis table specifies information for configuring and
status monitoring to pw template.
The index of this entry is hwPwCmdTemplateIndex. HwPwCmdTemplateEntry .1.3.6.1.4.1.2011.5.12.8.1.2.7.1 |
hwPwCmdTemplateIndexIndex for the conceptual row identifying a PW template within
this PW template table. Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.1 |
hwPwCmdTemplateNameIndicates the description string of the template,
MUST be NULL string if not applicable or not known yet.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.2 |
hwPwCmdTemplateVcTypeThis value indicate the service to be carried over
this template.rw PwVcType (HUAWEI-PW-TC-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.3 |
hwPwCmdTemplatePeerAddrTypeDenotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.4 |
hwPwCmdTemplatePeerAddrThis object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeros if not applicable
(hwPwCmdTemplatePeerAddrType is 'unknown').rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.5 |
hwPwCmdTemplateMtuIndicates the supported MTU size of the switch PW.
Range: 328-1710rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.6 |
hwPwCmdTemplateCwIndicates the control word capability of the switch PW.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.7 |
hwPwCmdTemplateVCCVIndicates the optional VCCV capabilities of the pw.
Options:
1. ccCw(0)
2. ccAlert(1)
3. ccLabel(2)
4. cvIcmpping(3)
5. cvLspping(4)
6. cvBfd(5)rw Bits .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.8 |
hwPwCmdTemplateFragIndicates whether or not fragmentation is supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.9 |
hwPwCmdTemplateBandwidthIndicates the bandwidth when signaling protocol is rsvp.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.10 |
hwPwCmdTemplateMaxAtmCellsIndicates the max ATM cells when encapsulation is ATM.
Range: 1-31
Default: 1rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.11 |
hwPwCmdTemplateTnlPolicyNameIndicates the tunnel policy name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.12 |
hwPwCmdTemplateQoSBehaviorIndexIndicates the traffic behavior Index when QOS is implemented.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.13 |
hwPwCmdTemplateExplicitPathNameIndicates the explicit path name set by the operator.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.14 |
hwPwCmdTemplateTdmJitterBufferIndicates the jitter buffer size of TDM PW.
Range: 500-128000
Default: 2000
Unit: microsecondrw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.15 |
hwPwCmdTemplateTdmLoadTimeIndicates the load time value of TDM PW.
Range: 125-5000
Default: 1000
Unit: byterw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.16 |
hwPwCmdTemplateTdmRTPIndicates enable or disable RTP of TDM PW.
Options:
1. disable(0) -indicates disable RTP
2. enable(1) -indicates enable RTP
Default: disable(0)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.17 |
hwPwCmdTemplateRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.18 |
hwPwCmdTemplateTdmTimeSlotNumIndicates the time slot Num of TDM PW.
Range: 1-32
Default: 32
Unit: byterw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.19 |
hwPwCmdTemplateMaxEncapcellDelayIndicates the Max ATM cells encapsulate delay time.
Range: 0-50
Default: 0
Unit: millisecondrw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.20 |
hwPwCmdTemplateFlowLabelIndicates the optional flow label capabilities of the pw.rw Bits .1.3.6.1.4.1.2011.5.12.8.1.2.7.1.21 |
hwPwCmdOperTableThis table specifies the reset operation that can be
done to the PW or PW template.
The index of this table is hwPwCmdOperIndex. SEQUENCE OF HwPwCmdOperEntry .1.3.6.1.4.1.2011.5.12.8.1.2.8 |
hwPwCmdOperEntryThis table specifies the reset operation that can be
done to the PW or PW template.
The index of this entry is hwPwCmdOperIndex. HwPwCmdOperEntry .1.3.6.1.4.1.2011.5.12.8.1.2.8.1 |
hwPwCmdOperIndexIndex for the conceptual row. Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.8.1.1 |
hwPwCmdOperTypeSpecifies the reset object.
Options:
1. vcindex(1) -indicates PW index
2. pwtindex(2) -indicates PW template indexrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.8.1.2 |
hwPwCmdOperVcOrPwtIndexSpecifies the object index to be reset.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.8.1.3 |
hwPwCmdOperStatusIndicates the result of the reset operation.
Options:
1. success(1) -indicates operation success
2. pwNotExist(2) -indicates PW not exist
3. pwTemplateNotExist(3) -indicates PW template not exist
4. resetFailure(4) -indicates reset PW failure
5. unknown(5) -indicates unknown operation statusro Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.8.1.4 |
hwPwCmdOperTimeStampSpecifies the total time since last reset operation has been
done.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.8.1.5 |
hwPwCmdOperRowStatusFor creating and deleting this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.8.1.6 |
hwPwCmdVcSwitchNotifEnableIf this object is set to true(1), then it enables
the emission of hwPwCmdVcSwitchWtoP and hwPwCmdVcSwitchPtoW
notifications; otherwise these notifications are not
emitted,
DEFVAL { false }rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.9 |
hwPwCmdAcVlanBindingTableThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this table are hwPwCmdAcVlanBindingVlanID and hwPwCmdAcVlanBindingPrimOrSecondary. SEQUENCE OF HwPwCmdAcVlanBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.10 |
hwPwCmdAcVlanBindingEntryThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are hwPwCmdAcVlanBindingVlanID and hwPwCmdAcVlanBindingPrimOrSecondary. HwPwCmdAcVlanBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.10.1 |
hwPwCmdAcVlanBindingVlanIDIndicates the VLAN ID referenced.
Range: 2-4093 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.1 |
hwPwCmdAcVlanBindingVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Range: 1-4294967295rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.2 |
hwPwCmdAcVlanBindingVcStatusIndicates the status of the PW:
down(1),
up(2),
plugout(3).ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.3 |
hwPwCmdAcVlanBindingTemplateNameIndicates the description string of the template,
MUST be NULL string if not applicable or not known yet.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.4 |
hwPwCmdAcVlanBindingSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.5 |
hwPwCmdAcVlanBindingOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1048575
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.6 |
hwPwCmdAcVlanBindingInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1048575
It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.7 |
hwPwCmdAcVlanBindingRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.8 |
hwPwCmdAcVlanBindingPrimOrSecondaryThis value indicate Primary PW or Secondary PW.
Options:
1. primaryPW(1) -indicates primary PW
2. secondaryPW(2) -indicates secondary PW Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.10.1.9 |
hwPwCmdAcPvpBindingTableThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this table are ifIndex, hwPwCmdAcPvpBindingVpi and hwPwCmdAcPvpBindingPrimOrSecondary. SEQUENCE OF HwPwCmdAcPvpBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.11 |
hwPwCmdAcPvpBindingEntryThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are ifIndex, hwPwCmdAcPvpBindingVpi and hwPwCmdAcPvpBindingPrimOrSecondary. HwPwCmdAcPvpBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.11.1 |
hwPwCmdAcPvpBindingVpiIndicates the VPI value.
Range: 0-4095rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.1 |
hwPwCmdAcPvpBindingVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Range: 1-4294967295rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.2 |
hwPwCmdAcPvpBindingVcStatusIndicates the status of the PW:
down(1),
up(2),
plugout(3).ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.3 |
hwPwCmdAcPvpBindingTemplateNameIndicates the description string of the template,
MUST be NULL string if not applicable or not known yet.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.4 |
hwPwCmdAcPvpBindingOutboundVpiOutbound VPI value of this ATM VC.
Range: 0-4095rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.5 |
hwPwCmdAcPvpBindingSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.6 |
hwPwCmdAcPvpBindingOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1048575
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.7 |
hwPwCmdAcPvpBindingInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1048575
It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.8 |
hwPwCmdAcPvpBindingPrimOrSecondaryThis value indicate Primary PW or Secondary PW.
Options:
1. primaryPW(1) -indicates primary PW
2. secondaryPW(2) -indicates secondary PWrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.9 |
hwPwCmdAcPvpBindingRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.11.1.10 |
hwPwCmdVccvTableThis table specifies information for VCCV ping.
The index of this table is hwPwCmdVccvVcID. SEQUENCE OF HwPwCmdVccvEntry .1.3.6.1.4.1.2011.5.12.8.1.2.12 |
hwPwCmdVccvEntryThis table specifies information for VCCV ping.
The index of this entry is hwPwCmdVccvVcID. HwPwCmdVccvEntry .1.3.6.1.4.1.2011.5.12.8.1.2.12.1 |
hwPwCmdVccvVcIDThis value indicate PW ID.
Range: 1-4294967294rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.1 |
hwPwCmdVccvReplyModeThe reply mode for the VCCV packet.
Options:
1. doNotReply(1) -indicates that there is no reply for VCCV PING
2. replyViaAnIPv4IPv6UdpPacket(2) -indicates that reply for VCCV PING using IP UDP packets
3. replyViaAnIPv4IPv6UdpPacketWithRouterAlert(3) -indicates that reply for VCCV PING using IP UDP packets with router alert
4. replyViaApplicationLevelControlChannel(4) -indicates that reply for VCCV PING using control channelrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.2 |
hwPwCmdVccvFrequencyThe frequency of VCCV packet.
Options:
1. freq1000ms(1000) -indicates VCCV PING frequency, interval is 1000 ms
2. freq2000ms(2000) -indicates VCCV PING frequency, interval is 2000 ms
3. freq5000ms(5000) -indicates VCCV PING frequency, interval is 5000 ms
4. freq10000ms(10000) -indicates VCCV PING frequency, interval is 10000 msrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.3 |
hwPwCmdVccvTimeoutLimitThe timeout limit of VCCV ping.
Range: 3-16rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.4 |
hwPwCmdVccvRecoverLimitThe recover limit of VCCV ping.
Range: 1-16rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.5 |
hwPwCmdVccvRemotePwVcIDIndicates the PW Remote VcID in MH-PW.
Range: 1-4294967295.
When this leaf is set to 4294967295, it means that no remote PW ID is configured in the case of no creation,
and that the configuration of remote PW ID is canceled in the case of modify operation.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.6 |
hwPwCmdVccvRemoteIpAddressIndicates the PW Remote IP address in MH-PW.rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.7 |
hwPwCmdVccvTtlIndicates the PW TTL value.
Range: 0-255.
When this leaf is set to 0, it means that no ttl value is configured in the case of no creation,
and that the configuration of TTL value is canceled in the case of modify operation.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.8 |
hwPwCmdVccvPingStatusIndicates the VCCV ping status.
Options:
1. normal(0) -indicates that VCCV PING can get reply from the peer and the PW connection is normal
2. break(1) -indicates that VCCV PING cannot reach the peer and the PW connection is break
3. inactive(2) -indicates that VCCV PING is not in work modero Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.9 |
hwPwCmdVccvPingSuccessNumThe number of VCCV ping succeed.
Range: 0-4294967295ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.10 |
hwPwCmdVccvPingTimeOutNumThe number of VCCV ping time out.
Range: 0-4294967295ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.11 |
hwPwCmdVccvRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating an auto VCCV PING configuration
3. destroy(6) -indicates deleting an auto VCCV PING configurationrw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.12 |
hwPwCmdVccvPingPipeUniformFor setting VCCV ping mode.
Options:
1. pipe(1) -indicates pipe mode of the VCCV ping.
2. uniform(2) -indicates uniform mode of the VCCV ping.
Default: pipe(1)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.12.1.13 |
hwPwCmdRecoverTableThis table specifies information for recover mode of the PW.
The index of this table is hwPwCmdRecoverVcID. SEQUENCE OF HwPwCmdRecoverEntry .1.3.6.1.4.1.2011.5.12.8.1.2.13 |
hwPwCmdRecoverEntryThis table specifies information for recover mode of the PW.
The index of this entry is hwPwCmdRecoverVcID. HwPwCmdRecoverEntry .1.3.6.1.4.1.2011.5.12.8.1.2.13.1 |
hwPwCmdRecoverVcIDIndicates the PW ID.
Range: 1-4294967294 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.13.1.1 |
hwPwCmdRecoverTypeIndicates the recover mode of the PW.
Options:
1. revertive(1) -indicates that automatic recovery is allowed
2. nonRevertive(2) -indicates that the traffic will not be switched back to the working PW automaticallyrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.13.1.2 |
hwPwCmdRecoverWtrtimeIndicates the recover time.
Range: 0,10-600
Unit: secondrw Unsigned32 (0|10..600) .1.3.6.1.4.1.2011.5.12.8.1.2.13.1.3 |
hwPwCmdManualSwitchoverTableThis table specifies information for manual switchover.
The index of this table is hwPwCmdManualSwitchoverVcID. SEQUENCE OF HwPwCmdManualSwitchoverEntry .1.3.6.1.4.1.2011.5.12.8.1.2.14 |
hwPwCmdManualSwitchoverEntryThis table specifies information for manual switchover.
The index of this entry is hwPwCmdManualSwitchoverVcID. HwPwCmdManualSwitchoverEntry .1.3.6.1.4.1.2011.5.12.8.1.2.14.1 |
hwPwCmdManualSwitchoverVcIDIndicates the primary PW ID.
Range: 1-4294967294 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.14.1.1 |
hwPwCmdManualSwitchoverSwitchTypeIndicates the type of manual switchover.
Options:
1. primaryPW(1) -indicates switch from primary PW to secondary PW
2. secondaryPW(2) -indicates switch from secondary PW to primary PWrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.14.1.2 |
hwPwCmdSwitchoverIpAddrTableThis table specifies information for
local and remote IP address to switch over.
The index of this table is hwPwCmdSwitchoverPwId. SEQUENCE OF HwPwCmdSwitchoverIpAddrEntry .1.3.6.1.4.1.2011.5.12.8.1.2.15 |
hwPwCmdSwitchoverIpAddrEntryThis table specifies information for
local and remote IP address to switch over.
The index of this entry is hwPwCmdSwitchoverPwId. HwPwCmdSwitchoverIpAddrEntry .1.3.6.1.4.1.2011.5.12.8.1.2.15.1 |
hwPwCmdSwitchoverPwIdIndicates the primary PW ID.
Range: 1-4294967295rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.15.1.1 |
hwPwCmdSwitchoverLocalIpAddrIndicates switch over local IP address of PW.rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.15.1.2 |
hwPwCmdSwitchoverRemoteIpAddrIndicates switch over remote IP address of PW.rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.15.1.3 |
hwPwCmdSwitchoverRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.15.1.4 |
hwPwCmdPsStatusTableThis table specifies information for status of PW protect group.
The index of this table is hwPwCmdPsPwId. SEQUENCE OF HwPwCmdPsStatusEntry .1.3.6.1.4.1.2011.5.12.8.1.2.16 |
hwPwCmdPsStatusEntryThis table specifies information for status of PW protect group.
The index of this entry is hwPwCmdPsPwId. HwPwCmdPsStatusEntry .1.3.6.1.4.1.2011.5.12.8.1.2.16.1 |
hwPwCmdPsPwIdIndicates the primary PW ID.
Range: 1-4294967294 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.16.1.1 |
hwPwCmdPsPrimaryPwStatusIndicates status of primary PW.
Options:
1. down(1) -indicates that the primary member of the PW protect group is down
2. upActive(2) -indicates that the primary member of the PW protect group is up and active
3. upStandby(3) -indicates that the primary member of the PW protect group is up and standbyro Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.16.1.2 |
hwPwCmdPsSecondaryPwStatusIndicates status of secondary PW.
Options:
1. down(1) -indicates that the secondary member of the PW protect group is down
2. upActive(2) -indicates that the secondary member of the PW protect group is up and active
3. upStandby(3) -indicates that the secondary member of the PW protect group is up and standbyro Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.16.1.3 |
hwPwCmdPvcExpMapTableThis table specifies information for PVC-EXP mapping.
The indexes of this table are ifIndex, hwPwCmdPvcExpMapVpi, hwPwCmdPvcExpMapVci. SEQUENCE OF HwPwCmdPvcExpMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.17 |
hwPwCmdPvcExpMapEntryThis table specifies information for PVC-EXP mapping.
The indexes of this entry are ifIndex, hwPwCmdPvcExpMapVpi, hwPwCmdPvcExpMapVci. HwPwCmdPvcExpMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.17.1 |
hwPwCmdPvcExpMapVpiIndicates the VPI value.
Range: 0-4095rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.17.1.1 |
hwPwCmdPvcExpMapVciIndicates the VCI value.
Range: 32-65535rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.17.1.2 |
hwPwCmdPvcExpMapExpIndicates the EXP value.
Range: 0-7rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.17.1.3 |
hwPwCmdPvcExpMapRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating a mapping from PVC to MPLS EXP
3. destroy(6) -indicates deleting a mapping from PVC to MPLS EXPrw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.17.1.4 |
hwPwCmdExpCosMapTableThis table specifies information for EXP-COS mapping.
The index of this table is hwPwCmdExpCosMapExp. SEQUENCE OF HwPwCmdExpCosMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.18 |
hwPwCmdExpCosMapEntryThis table specifies information for EXP-COS mapping.
The index of this entry is hwPwCmdExpCosMapExp. HwPwCmdExpCosMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.18.1 |
hwPwCmdExpCosMapExpIndicates the EXP value.
Range: 0-7rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.18.1.1 |
hwPwCmdExpCosMapCosIndicates the COS value.
Range: 0-7rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.18.1.2 |
hwPwCmdTdmExpMapTableThis table specifies information for TDM-EXP mapping.
The index of this table is hwPwCmdTdmConnectId. SEQUENCE OF HwPwCmdTdmExpMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.19 |
hwPwCmdTdmExpMapEntryThis table specifies information for TDM-EXP mapping.
The index of this entry is hwPwCmdTdmConnectId. HwPwCmdTdmExpMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.19.1 |
hwPwCmdTdmConnectIdIndicates the TDM connect ID.
Range: 0-2047rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.19.1.1 |
hwPwCmdTdmExpMapExpIndicates the EXP value.
Range: 0-7
Default: 0rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.19.1.2 |
hwPwCmdTdmExpMapRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating a mapping from TDM to MPLS EXP
3. destroy(6) -indicates deleting a mapping from TDM to MPLS EXPrw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.19.1.3 |
hwPwCmdAcTdmBindingTableThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this table are hwPwCmdAcTdmBindingTdmConnectId and hwPwCmdAcTdmBindingPrimOrSecondary. SEQUENCE OF HwPwCmdAcTdmBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.20 |
hwPwCmdAcTdmBindingEntryThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The indexes of this entry are hwPwCmdAcTdmBindingTdmConnectId and hwPwCmdAcTdmBindingPrimOrSecondary. HwPwCmdAcTdmBindingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.20.1 |
hwPwCmdAcTdmBindingTdmConnectIdIndicates the connect index referenced.
Range: 0-1023rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.1 |
hwPwCmdAcTdmBindingVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Range: 1-4294967294rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.2 |
hwPwCmdAcTdmBindingVcStatusIndicates the status of the PW:
down(1),
up(2),
plugout(3).rw VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.3 |
hwPwCmdAcTdmBindingTemplateNameIndicates the description string of the template,
MUST be NULL string if not applicable or not known yet.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.4 |
hwPwCmdAcTdmBindingEncapUDPPortIndicates UDP protocol encapsulation, UDP destination port.
Range: 50000-57300rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.5 |
hwPwCmdAcTdmBindingSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.6 |
hwPwCmdAcTdmBindingOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1048575
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.7 |
hwPwCmdAcTdmBindingInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1048575
It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.8 |
hwPwCmdAcTdmBindingPrimOrSecondaryThis value indicate Primary PW or Secondary PW.
Options:
1. primaryPW(1) -indicates primary PW
2. secondaryPW(2) -indicates secondary PWrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.9 |
hwPwCmdAcTdmBindingRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.20.1.10 |
hwPwCmdPwTableThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The index of this table is hwPwCmdPwID. SEQUENCE OF HwPwCmdPwEntry .1.3.6.1.4.1.2011.5.12.8.1.2.21 |
hwPwCmdPwEntryThis table specifies information for configuring and
status monitoring for PW used in fixed network.
The index of this entry is hwPwCmdPwID. HwPwCmdPwEntry .1.3.6.1.4.1.2011.5.12.8.1.2.21.1 |
hwPwCmdPwIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Range: 1-4294967294rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.1 |
hwPwCmdPwTemplateNameIndicates the description string of the template,
MUST be NULL string if not applicable or not known yet.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.2 |
hwPwCmdPwAcBindModeAcType.
Options:
1. vlan(1) -indicates vlan
2. tdm(2) -indicates tdm
3. pvcfsp(3) -indicates pvc fsp
4. pvpfsp(4) -indicates pvp fsprw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.3 |
hwPwCmdPwVlanIDIndicates the VLAN ID referenced.
Range: 2-4093 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.4 |
hwPwCmdPwTdmVclIDIndicates the connect index referenced.
Range: 0-2047, 4294967295rw Unsigned32 (0..2047|4294967295) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.5 |
hwPwCmdPwIfindexIndex of the interface (or the virtual interface)
associated with the PW.
Range: 1-2147483647, -1rw Integer32 (-1|1..2147483647) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.6 |
hwPwCmdPwVciIndicates the VPI value.
Range: 32-65535, -1rw Integer32 (-1|32..65535) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.7 |
hwPwCmdPwVpiUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
Range: 0-4095, -1rw Integer32 (-1|0..4095) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.8 |
hwPwCmdPwOutboundVciVCI value of this ATM VC.
Range: 32-65535, -1
If the pwVcType is atmNto1Transparent, atmCell1to1Vpc or
atmCellNto1Vpc then the value should be set to zero.rw Integer32 (-1|32..65535) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.9 |
hwPwCmdPwOutboundVpiVPI value of this ATM VC.
Range: 0-4095, -1
If the pwVcType is atmNto1Transparent then the value will be set
to zero.rw Integer32 (-1|0..4095) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.10 |
hwPwCmdPwImaGroupIndicates the VLAN ID referenced.
Range: 0-4294967294 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.11 |
hwPwCmdPwVcStatusIndicates the status of the PW:
down(1),
up(2),
plugout(3).ro VcStatusType .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.12 |
hwPwCmdPwEncapSrcUDPPortIndicates UDP protocol encapsulation, UDP destination port.
Range: 50000-57300, -1rw Integer32 (-1|50000..57300) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.13 |
hwPwCmdPwEncapDstUDPPortIndicates UDP protocol encapsulation, UDP destination port.
Range: 49152-65535, -1rw Integer32 (-1|49152..65535) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.14 |
hwPwCmdPwSignalProtocolSet by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the Pwid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.rw SignalProtocolType .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.15 |
hwPwCmdPwOutboundLabelThe PW label used in the outbound direction (i.e. toward
the PSN).
Range: 16-1048575, -1
It may be set up manually if owner is 'manual'
or automatically otherwise. Examples: For MPLS PSN, it
represents the 20 bits of PW tag, for L2TP it represent
the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Integer32 (-1|16..1048575) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.16 |
hwPwCmdPwInboundLabelThe PW label used in the inbound direction (i.e. packets
received from the PSN.
Range: 16-1048575
It may be set up manually if owner
is 'manual' or automatically otherwise.
Examples: For MPLS PSN, it represents the 20 bits of PW
tag, for L2TP it represent the 32 bits Session ID.
If the label is not yet known (signaling in process), the
object should return a value of 0xFFFF.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.17 |
hwPwCmdPwPriorityThis value indicate Primary PW or Secondary PW.
Options:
1. primaryPW(1) -indicates primary PW
2. secondaryPW(2) -indicates secondary PWrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.18 |
hwPwCmdPwRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.rw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.19 |
hwPwCmdPwDescPW description, used to describe extra information of PW.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.20 |
hwPwCmdPwReceiveDstUDPPortIndicates UDP protocol encapsulation, UDP source port.
Range: 50048-50111, -1rw Integer32 (-1|50048..50111) .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.21 |
hwPwCmdPwMultiPvcMulti VCCs or VPCs string, include vpi,vci,outvpi and outvci.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.22 |
hwPwCmdPwMultiPvcOpMulti VCCs or VPCs operate code, add or delete.
Options:
1. add(1) -indicates add operation
2. delete(2) -indicates delete operation
3. invalidValue(-1) -indicates invalid valuerw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.21.1.23 |
hwPwCmdPwCarTableThis table specifies information for PW CAR.
The index of this table is hwPwCmdPWCarVcID. SEQUENCE OF HwPwCmdPwCarEntry .1.3.6.1.4.1.2011.5.12.8.1.2.22 |
hwPwCmdPwCarEntryThis table specifies information for PW CAR.
The index of this entry is hwPwCmdPWCarVcID. HwPwCmdPwCarEntry .1.3.6.1.4.1.2011.5.12.8.1.2.22.1 |
hwPwCmdPWCarVcIDIndicates the PW ID.
Range: 1-4294967294 Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.22.1.1 |
hwPwCmdPWCarRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating committed access rate parameters of a PW
3. destroy(6) -indicates deleting committed access rate parameters of a PWrw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.22.1.4 |
hwPwCmdPWCarCirCommitted information rate, it is the necessary parameter for adding pw car.
Range: 1-1048575
Unit: 64Kbit/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.22.1.5 |
hwPwCmdPWCarCbsCommitted burst size, default value is ((cir+8191)/8192+1).
Range: 1-32767
Unit: 2KByte/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.22.1.6 |
hwPwCmdPWCarPirPeak information rate, default value is double of committed information rate.
Range: 1-1048575
Unit: 64Kbit/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.22.1.7 |
hwPwCmdPWCarPbsPeak burst size, default value is MAX(((pir+8191)/8192 + 1), cbs).
Range: 1-32767
Unit: 2KByte/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.22.1.8 |
hwPwCmdPvpExpMapTableThis table specifies information for PVP-EXP mapping.
The indexes of this table are ifIndex and hwPwCmdPvpExpMapVpi. SEQUENCE OF HwPwCmdPvpExpMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.23 |
hwPwCmdPvpExpMapEntryThis table specifies information for PVP-EXP mapping.
The indexes of this entry are ifIndex and hwPwCmdPvpExpMapVpi. HwPwCmdPvpExpMapEntry .1.3.6.1.4.1.2011.5.12.8.1.2.23.1 |
hwPwCmdPvpExpMapVpiIndicates the VPI value.
Range: 0-4095rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.23.1.1 |
hwPwCmdPvpExpMapExpIndicates the EXP value.
Range: 0-7rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.23.1.2 |
hwPwCmdPvpExpMapRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating a mapping from PVP to MPLS EXP
3. destroy(6) -indicates deleting a mapping from PVP to MPLS EXPrw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.23.1.3 |
hwMplsEcmpEnableUsed to enable or disable the ECMP function.
Options:
1. enable(1) -indicates that the ECMP function is enabled
2. disable(2) -indicates that the ECMP function is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.24 |
hwMplsL2VPNEnableUsed to enable or disable the MPLS L2VPN function.
Options:
1. enable(1) -indicates that the MPLS L2VPN function is enabled
2. disable(2) -indicates that the MPLS L2VPN function is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.25 |
hwPwExtTableThis table specifies the extend information for configuring and
status monitoring that are common to all service types
and PSN types.
The index of this table is pwIndex. SEQUENCE OF HwPwExtEntry .1.3.6.1.4.1.2011.5.12.8.1.2.26 |
hwPwExtEntryThis table specifies the extend information for configuring and
status monitoring that are common to all service types
and PSN types.
The index of this entry is pwIndex. HwPwExtEntry .1.3.6.1.4.1.2011.5.12.8.1.2.26.1 |
hwPwPriorityThis value indicate Primary PW or Secondary PW.
Options:
1. primaryPW(1) -indicates the primary member of the PW protect group
2. secondaryPW(2) -indicates the secondary member of the PW protect grouprw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.1 |
hwPwPrimaryPwIndexThe value that represents the corresponding primary PW in the pwTable.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.2 |
hwPwVCCVCapabilitiesConfig the optional VCCV capabilities of the PW.rw Bits .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.3 |
hwPwVCCVStatusIndicates the optional VCCV capabilities of the PW.ro Bits .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.4 |
hwPwFlowLabelIndicates the optional flow label capabilities of the PW.rw Bits .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.5 |
hwPwAtmCfgTimeoutIndicates max ATM cells encapsulation delay time.
Range: 0-50
Default: 0
Unit: millisecondrw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.6 |
hwPwPriMappingProfNameQoS priority mapping profile name for PW, a string of 1-32 characters.
There are all together 92 valid characters for the name.
These characters include the following:
uppercase and lowercase English letters (52 characters), numerals (0-9),
and 30 symbols: ! # $ % & ' ( ) * + , - . / : ; < = > @ [ \ ] ^ _ ` | ~~.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.7 |
hwPwFlowLabelCapabilitiesIndicates the PW flow label capability.rw Bits .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.8 |
hwPwFlowlabelStatusIndicates the negotiation result of the PW flow label capability.
The negotiation result of static PW is consistent with local configuration.ro Bits .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.9 |
hwPwStatisticSwitchUsed to enable or disable the traffic statistic function of pw.
Options:
1. enable(1) -indicates that the traffic statistic function is enabled
2. disable(2) -indicates that the traffic statistic function is disabled
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.10 |
hwPwTnlPolicyUsed to configure the tunnel policy used by the PW.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.26.1.11 |
hwPwCmdTdmDefectStatsTableThis table is a read-only table. The purpose of
this table is to keep statistical information about
the TDM failure alarm. The index of this table is pwIndex. SEQUENCE OF HwPwCmdTdmDefectStatsEntry .1.3.6.1.4.1.2011.5.12.8.1.2.27 |
hwPwCmdTdmDefectStatsEntryThis table is a read-only table. The purpose of
this table is to keep statistical information about
the TDM failure alarm.
The index of this entry is pwIndex. HwPwCmdTdmDefectStatsEntry .1.3.6.1.4.1.2011.5.12.8.1.2.27.1 |
hwPwCmdTdmDefectStatsJtrBfrOverRunIndicates the number of times that the
jitter buffer overrun.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.1 |
hwPwCmdTdmDefectStatsJtrBfrOverRunClearIndicates the number of times that the system
is restored from overrun of the jitter buffer.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.2 |
hwPwCmdTdmDefectStatsJtrBfrUnderRunIndicates the number of times that the
jitter buffer overrun.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.3 |
hwPwCmdTdmDefectStatsJtrBfrUnderRunClearIndicates the number of times that the system
is restored from underrun of the jitter buffer.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.4 |
hwPwCmdTdmDefectStatsR1Indicates the number of times that the PSN side receives
an alarm triggered by R = 1. When the peer end didn't
receive for failure. For example, jitter buffer underrun,
Then the local end receives an packet with R = 1.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.5 |
hwPwCmdTdmDefectStatsR1ClearIndicates the number of times that the system is restored
from R1.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.6 |
hwPwCmdTdmDefectStatsLM010Indicates the number of times that the PSN side receives
an alarm triggered by M = 1. Only for the CESOPSN, When
the local end receives a RDI alarm from the AC side,
the local end sets the control flag M to 1. Then, the
peer end receives an LM(010) packet.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.7 |
hwPwCmdTdmDefectStatsLM010ClearIndicates the number of times that the system is restored
from LM(010) to LM(000).ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.8 |
hwPwCmdTdmDefectStatsLM100Indicates the number of times that the PSN side receives
an alarm triggered by L = 1. When the local end receives
a LOS, LOF, AIS, or LMFA alarm from the AC side,
the local end sets the control flag L to 1.
Then, the peer end receives an LM(100) packet.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.9 |
hwPwCmdTdmDefectStatsLM100ClearIndicates the number of times that the system is restored
from LM(100) to LM(000).ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.27.1.10 |
hwPwPriMappingTableMPLS priority mapping profile table for PW.
The purpose of this table is to set and query MPLS priority mapping profile.
The index of this table is hwPwPriMappingProfileName. SEQUENCE OF HwPwPriMappingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.28 |
hwPwPriMappingEntryMPLS priority mapping profile table for PW.
The purpose of this table is to set and query MPLS priority mapping profile.
The index of this entry is hwPwPriMappingProfileName. HwPwPriMappingEntry .1.3.6.1.4.1.2011.5.12.8.1.2.28.1 |
hwPwPriMappingProfileNameQoS priority mapping profile name for PW, a string of 1-32 characters.
There are all together 92 valid characters for the name.
These characters include the following:
uppercase and lowercase English letters (52 characters), numerals (0-9),
and 30 symbols: ! # $ % & ' ( ) * + , - . / : ; < = > @ [ \ ] ^ _ ` | ~~. OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.28.1.1 |
hwPwInboundInputPriListInbound input priority list(MPLS PW label EXP) of QoS priority mapping.
Legal character include: 0-7,hyphen,comma.
Example legal string: 0,2,4-7.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.28.1.2 |
hwPwInboundOutputPriListInbound output priority list(ethernet VLAN tag 802.1p) of QoS priority mapping.
Legal character include: 0-7,hyphen,comma.
Example legal string: 0,2,4-7.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.28.1.3 |
hwPwOutboundInputPriListOutbound input priority list(ethernet VLAN tag 802.1p) of QoS priority mapping.
Legal character include: 0-7,hyphen,comma.
Example legal string: 0,2,4-7.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.28.1.4 |
hwPwOutboundOutputPriListOutbound output priority list(MPLS PW label EXP) of QoS priority mapping.
Legal character include: 0-7,hyphen,comma.
Example legal string: 0,2,4-7.rw OCTET STRING .1.3.6.1.4.1.2011.5.12.8.1.2.28.1.5 |
hwPwPriMappingProfileRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating committed
3. destroy(6) -indicates deleting committedrw RowStatus .1.3.6.1.4.1.2011.5.12.8.1.2.28.1.6 |
hwPwCmdStatisticTableThis table is used to query or clear the
traffic statistic info of PW.
The index of this table is pwIndex. SEQUENCE OF HwPwCmdStatisticEntry .1.3.6.1.4.1.2011.5.12.8.1.2.29 |
hwPwCmdStatisticEntryThis table is used to query or clear the
traffic statistic info of PW.
The index of this entry is pwIndex. HwPwCmdStatisticEntry .1.3.6.1.4.1.2011.5.12.8.1.2.29.1 |
hwPwCmdStatisticUpstreamOctectsP0The total number of upstream octets with priority equel to 0.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.1 |
hwPwCmdStatisticUpstreamPacketsP0The total number of upstream packets with priority equel to 0.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.2 |
hwPwCmdStatisticUpstreamOctectsP1The total number of upstream octets with priority equel to 1.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.3 |
hwPwCmdStatisticUpstreamPacketsP1The total number of upstream packets with priority equel to 1.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.4 |
hwPwCmdStatisticUpstreamOctectsP2The total number of upstream octets with priority equel to 2.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.5 |
hwPwCmdStatisticUpstreamPacketsP2The total number of upstream packets with priority equel to 2.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.6 |
hwPwCmdStatisticUpstreamOctectsP3The total number of upstream octets with priority equel to 3.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.7 |
hwPwCmdStatisticUpstreamPacketsP3The total number of upstream packets with priority equel to 3.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.8 |
hwPwCmdStatisticUpstreamOctectsP4The total number of upstream octets with priority equel to 4.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.9 |
hwPwCmdStatisticUpstreamPacketsP4The total number of upstream packets with priority equel to 4.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.10 |
hwPwCmdStatisticUpstreamOctectsP5The total number of upstream octets with priority equel to 5.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.11 |
hwPwCmdStatisticUpstreamPacketsP5The total number of upstream packets with priority equel to 5.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.12 |
hwPwCmdStatisticUpstreamOctectsP6The total number of upstream octets with priority equel to 6.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.13 |
hwPwCmdStatisticUpstreamPacketsP6The total number of upstream packets with priority equel to 6.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.14 |
hwPwCmdStatisticUpstreamOctectsP7The total number of upstream octets with priority equel to 7.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.15 |
hwPwCmdStatisticUpstreamPacketsP7The total number of upstream packets with priority equel to 7.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.16 |
hwPwCmdStatisticDownstreamOctectsP0The total number of downstream octets with priority equel to 0.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.17 |
hwPwCmdStatisticDownstreamPacketsP0The total number of downstream packets with priority equel to 0.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.18 |
hwPwCmdStatisticDownstreamOctectsP1The total number of downstream octets with priority equel to 1.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.19 |
hwPwCmdStatisticDownstreamPacketsP1The total number of downstream packets with priority equel to 1.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.20 |
hwPwCmdStatisticDownstreamOctectsP2The total number of downstream octets with priority equel to 2.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.21 |
hwPwCmdStatisticDownstreamPacketsP2The total number of downstream packets with priority equel to 2.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.22 |
hwPwCmdStatisticDownstreamOctectsP3The total number of downstream octets with priority equel to 3.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.23 |
hwPwCmdStatisticDownstreamPacketsP3The total number of downstream packets with priority equel to 3.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.24 |
hwPwCmdStatisticDownstreamOctectsP4The total number of downstream octets with priority equel to 4.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.25 |
hwPwCmdStatisticDownstreamPacketsP4The total number of downstream packets with priority equel to 4.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.26 |
hwPwCmdStatisticDownstreamOctectsP5The total number of downstream octets with priority equel to 5.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.27 |
hwPwCmdStatisticDownstreamPacketsP5The total number of downstream packets with priority equel to 5.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.28 |
hwPwCmdStatisticDownstreamOctectsP6The total number of downstream octets with priority equel to 6.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.29 |
hwPwCmdStatisticDownstreamPacketsP6The total number of downstream packets with priority equel to 6.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.30 |
hwPwCmdStatisticDownstreamOctectsP7The total number of downstream octets with priority equel to 7.ro Counter64 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.31 |
hwPwCmdStatisticDownstreamPacketsP7The total number of downstream packets with priority equel to 7.ro Counter32 .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.32 |
hwPwCmdStatisticClearClear the traffic statistics of this pw.
Options:
1. clear(1) -clear the traffic statistics of this pwrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.29.1.33 |
hwPwStatisticClearAllClear the traffic statistics of all PWs.
Options:
1. clear(1) -clear the traffic statistics of all PWsrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.30 |
hwPwRedundancyTableThis table specifies information for pw redundancy.
The index of this table is pwIndex. SEQUENCE OF HwPwRedundancyEntry .1.3.6.1.4.1.2011.5.12.8.1.2.31 |
hwPwRedundancyEntryThis table specifies information for pw redundancy.
The index of this entry is pwIndex. HwPwRedundancyEntry .1.3.6.1.4.1.2011.5.12.8.1.2.31.1 |
hwPwRedundancyModeIndicates the mode of the pw redundancy.
Options:
1. master(1) -indicates that the pw redundancy mode is master
2. independent(2) -indicates that the pw redundancy mode is independent
Default: master(1)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.31.1.1 |
hwPwStreamDualReceivingIndicates the stream receiving mode of the pw redundancy.
Options:
1. enable(1) -indicates that the stream receiving mode of the pw redundancy is dual
2. disable(2) -indicates that the stream receiving mode of the pw redundancy is single
Default: disable(2)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.31.1.2 |
hwPwCmdPwCarExtTableThis table specifies information for PW CAR.
The index of this table is pwIndex. SEQUENCE OF HwPwCmdPwCarExtEntry .1.3.6.1.4.1.2011.5.12.8.1.2.32 |
hwPwCmdPwCarExtEntryThis table specifies information for PW CAR.
The index of this entry is pwIndex. HwPwCmdPwCarExtEntry .1.3.6.1.4.1.2011.5.12.8.1.2.32.1 |
hwPwCmdPwCarExtCirCommitted information rate, it is the necessary parameter for adding pw car.
Range: 1-1048575
Unit: 64Kbit/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.32.1.1 |
hwPwCmdPwCarExtCbsCommitted burst size, default value is ((cir+8191)/8192+1).
Range: 1-32767
Unit: 2KByte/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.32.1.2 |
hwPwCmdPwCarExtPirPeak information rate, default value is double of committed information rate.
Range: 1-1048575
Unit: 64Kbit/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.32.1.3 |
hwPwCmdPwCarExtPbsPeak burst size, default value is MAX(((pir+8191)/8192 + 1), cbs).
Range: 1-32767
Unit: 2KByte/srw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.32.1.4 |
hwPwCmdPwCarExtRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating committed access rate parameters of a PW
3. destroy(6) -indicates deleting committed access rate parameters of a PWrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.32.1.5 |
hwPwAutoVccvTableThis table specifies information for PW VCCV ping.
The index of this table is pwIndex. SEQUENCE OF HwPwAutoVccvEntry .1.3.6.1.4.1.2011.5.12.8.1.2.33 |
hwPwAutoVccvEntryThis table specifies information for PW VCCV ping.
The index of this entry is pwIndex. HwPwAutoVccvEntry .1.3.6.1.4.1.2011.5.12.8.1.2.33.1 |
hwPwAutoVccvReplyModeThe reply mode for the VCCV packet.
Options:
1. doNotReply(1) -indicates that there is no reply for VCCV PING
2. replyViaAnIPv4IPv6UdpPacket(2) -indicates that reply for VCCV PING using IP UDP packets
3. replyViaAnIPv4IPv6UdpPacketWithRouterAlert(3) -indicates that reply for VCCV PING using IP UDP packets with router alert
4. replyViaApplicationLevelControlChannel(4) -indicates that reply for VCCV PING using control channelrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.1 |
hwPwAutoVccvFrequencyThe frequency of VCCV packet.
Options:
1. freq1000ms(1000) -indicates VCCV PING frequency, interval is 1000 ms
2. freq2000ms(2000) -indicates VCCV PING frequency, interval is 2000 ms
3. freq5000ms(5000) -indicates VCCV PING frequency, interval is 5000 ms
4. freq10000ms(10000) -indicates VCCV PING frequency, interval is 10000 msrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.2 |
hwPwAutoVccvTimeoutLimitThe timeout limit of VCCV ping.
Range: 3-16rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.3 |
hwPwAutoVccvRecoverLimitThe recover limit of VCCV ping.
Range: 1-16rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.4 |
hwPwAutoVccvRemotePwIDIndicates the PW Remote VcID in MH-PW.
Range: 1-4294967295.
When this leaf is set to 4294967295, it means that no remote PW ID is configured in the case of no creation,
and that the configuration of remote PW ID is canceled in the case of modify operation.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.5 |
hwPwAutoVccvRemoteIpAddressIndicates the PW Remote IP address in MH-PW.rw IpAddress .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.6 |
hwPwAutoVccvTtlIndicates the PW TTL value.
Range: 0-255.
When this leaf is set to 0, it means that no ttl value is configured in the case of no creation,
and that the configuration of TTL value is canceled in the case of modify operation.rw Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.7 |
hwPwAutoVccvPingStatusIndicates the VCCV ping status.
Options:
1. normal(0) -indicates that VCCV PING can get reply from the peer and the PW connection is normal
2. break(1) -indicates that VCCV PING cannot reach the peer and the PW connection is break
3. inactive(2) -indicates that VCCV PING is not in work modero Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.8 |
hwPwAutoVccvPingSuccessNumThe number of VCCV ping succeed.
Range: 0-4294967295ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.9 |
hwPwAutoVccvPingTimeOutNumThe number of VCCV ping time out.
Range: 0-4294967295ro Unsigned32 .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.10 |
hwPwAutoVccvStatisticsResetClear the traffic statistics of this pw.
Options:
1. reset(1) -reset the traffic statistics of this PWrw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.11 |
hwPwAutoVccvPipeUniformFor setting VCCV ping mode.
Options:
1. pipe(1) -indicates pipe mode of the VCCV ping.
2. uniform(2) -indicates uniform mode of the VCCV ping.
Default: pipe(1)rw Enumeration .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.12 |
hwPwAutoVccvRowStatusFor creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) -indicates query operation
2. createAndGo(4) -indicates creating an auto VCCV PING configuration
3. destroy(6) -indicates deleting an auto VCCV PING configurationrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.12.8.1.2.33.1.13 |
hwPwCmdConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.3 |
hwPwCmdGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.3.1 |
hwPwCmdTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.4 |
hwPwCmdTunnIdIndicates the index of tunnel.
Range: 1-64ro Integer32 .1.3.6.1.4.1.2011.5.12.8.1.4.1 |
hwPwCmdTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.5 |
hwPwCmdCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.5.1 |
hwPwCmdCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.5.1.0 |
hwPwCmdPwStatusThis notification is generated when the pw's status
changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.1.0.1 |
hwPwCmdPwDeletedThis notification is generated when the pw's deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.1.0.2 |
hwPwCmdAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.5.2 |
hwPwCmdAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.12.8.1.5.2.0 |
hwPwCmdSerRecovThis notification is generated when the pw recovered
the service.
The first object is the index of the first pw,
and the other is the index of the last pw. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.2.0.1 |
hwPwCmdSerFaultThis notification is generated when the pw service
has some faults.
The first object is the index of the first pw,
and the other is the index of the last pw. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.2.0.2 |
hwPwCmdSerSwitchToSecThis notification is generated when the service
switches over to the secondary PW.
The first object is the index of primary pw,
and the other is the index of secondary pw. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.2.0.3 |
hwPwCmdSerSwitchToPriThis notification is generated when the service
switches over to the primary PW.
The first object is the index of primary pw,
and the other is the index of secondary pw. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.2.0.4 |
hwPwCmdTunnSwitchToWThis notification is generated when the MPLS
service switches from the protect tunnel to the
work tunnel.
The first object is the index of work-tunnel,
and the other is the index of protect-tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.2.0.5 |
hwPwCmdTunnSwitchToPThis notification is generated when the MPLS
service switches from the work-tunnel to the
protect-tunnel.
The first object is the index of protect-tunnel,
and the other is the index of work-tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.12.8.1.5.2.0.6 |