HUAWEI-L3VLAN-MIB
The HUAWEI-L3VLAN-MIB enables monitoring and management of Layer 3 VLAN interfaces on Huawei network devices, exposing specific metrics including VLAN identifiers, encapsulation types, and bidirectional packet statistics for ingress and egress traffic.
Imported Objects
Objects
30 total| Object Name |
|---|
hwL3VlanThe HUAWEI-L3VLAN-MIB contains objects to
manage level 3 vlan.
Through the MIB,you can get the detail information
of each vlan,such as VLANID,encapsulated type,the
statistics of the received and sent packets and so on. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.100 |
SNMPv2-CONFThe HUAWEI-L3VLAN-MIB contains objects to
manage level 3 vlan.
Through the MIB,you can get the detail information
of each vlan,such as VLANID,encapsulated type,the
statistics of the received and sent packets and so on. Unknown .1.3.6.1.4.1.2011.5.25.100 |
hwL3VlanMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.100.1 |
hwSubIfVlanTableThis table contains the information of vlans
encapsulated by the sub-interfaces. SEQUENCE OF HwSubIfVlanEntry .1.3.6.1.4.1.2011.5.25.100.1.1 |
hwSubIfVlanEntryProvides the information of a sub-interface vlan entry. HwSubIfVlanEntry .1.3.6.1.4.1.2011.5.25.100.1.1.1 |
hwSubIfIndexInterface index(es) of port(s) present on the device. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.100.1.1.1.1 |
hwSubIfVlanIdThis object specifies the vlan id encapsulated by
the sub-interface. Integer32 .1.3.6.1.4.1.2011.5.25.100.1.1.1.2 |
hwSubIfVlanTypeThis object specifies the vlan type encapsulated
by the sub-interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.100.1.1.1.3 |
hwSubIfVlanStatusThis object specifies the status of the sub-interface
vlan table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.100.1.1.1.4 |
hwVLANMibRoutertVlanCountTablePer vid router statistics table includes the
number of packets that each vlan is received and sent. SEQUENCE OF VLANMibRoutertVlanCountEntry .1.3.6.1.4.1.2011.5.25.100.1.2 |
hwVLANMibRoutertVlanCountEntryEntry of vLANMibRoutertVlanCountTable VLANMibRoutertVlanCountEntry .1.3.6.1.4.1.2011.5.25.100.1.2.1 |
hwVLANMibRouterPortInterface index(es) of trunk port(s) present on the device.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.100.1.2.1.1 |
hwVLANMibRouterVIDThe vlan id.ro Integer32 .1.3.6.1.4.1.2011.5.25.100.1.2.1.2 |
hwVLANMibRouterVlanPacketTranThe number of packets transmitted to vlanro Counter32 .1.3.6.1.4.1.2011.5.25.100.1.2.1.3 |
hwVLANMibRouterVlanPacketSentNumber of packets sent by vlanro Counter32 .1.3.6.1.4.1.2011.5.25.100.1.2.1.4 |
hwVLANMibClearVidStatisticsSetting the object to clear(1) will clear the counters of a row
of the hwVLANMibRoutertVlanCountTable. When a clear action had been
finished, or there is no clear action , the value of the object
would be unavailable(0).rw Enumeration .1.3.6.1.4.1.2011.5.25.100.1.2.1.5 |
hwSubIfVlanPolicyTableThis table contains the information of vlan and 8021P/DSCP/EtherType policy
encapsulated by the sub-interfaces. SEQUENCE OF HwSubIfVlanPolicyEntry .1.3.6.1.4.1.2011.5.25.100.1.3 |
hwSubIfVlanPolicyEntryProvides the information of a sub-interface vlan policy entry. HwSubIfVlanPolicyEntry .1.3.6.1.4.1.2011.5.25.100.1.3.1 |
hwSubIfVlanPolicyIfIndexInterface index(es) of port(s) present on the device. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.100.1.3.1.1 |
hwSubIfVlanPolicyVlanIdThis object specifies the vlan id encapsulated by the sub-interface.
when the vlan id is zero it means to configure the interface as the untagged sub-interface, When configure vlan as a range, hwSubIfVlanPolicyVlanId is the start vlan id and hwSubIfVlanPolicyVlanIdEnd is the end vlan id. Integer32 .1.3.6.1.4.1.2011.5.25.100.1.3.1.2 |
hwSubIfVlanPolicyIfTypeIndicates the sub-interface type as follows:
dot1q(1): indicates vlan-type dot1q sub-interface.
dot1qTerm(2): indicates dot1q termination sub-interface.
stacking(3): indicates qinq stacking sub-interface.
untagged(4): indicates untagged sub-interface.rw Enumeration .1.3.6.1.4.1.2011.5.25.100.1.3.1.3 |
hwSubIfVlanPolicyVlanIdEndWhen configure vlan as a range, hwSubIfVlanPolicyVlanId is the start vlan id and hwSubIfVlanPolicyVlanIdEnd is the end vlan id.rw Integer32 .1.3.6.1.4.1.2011.5.25.100.1.3.1.4 |
hwSubIfVlanPolicyTypeIndicates the type of vlan policy as follows:
8021p(1): indicates IEEE 802.1P encapsulation.
dscp(2): indicates Differentiated Services CodePoint.
eth-type(3): indicates EtherType,For example PPPOE.
default(4):indicates the default policy.rw Enumeration .1.3.6.1.4.1.2011.5.25.100.1.3.1.5 |
hwSubIfVlanPolicyValueIndicates the information of vlan policy as follows:
Each octet within this value specifies a set of eight priorities. When the policy type is 8021p, the first octet specifying 8021p priority 0 through 7; When the policy type is dscp, the first octet specifying dscp priority 0 through 7, the second octet specifying priority 8 through 15, etc; When the policy type is eth-type, the most significant bit of the first octet specifying EtherType PPPOE. Within each octet, the most significant bit represents the lowest numbered priority, and the least significant bit represents the highest numbered priority. Thus, each priority is represented by a single bit within the value of this object. If that bit has a value of '1' then that priority is included in the set of priorities; the priority is not included if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.100.1.3.1.6 |
hwSubIfVlanPolicyGroupIdGroup-management id.rw Integer32 .1.3.6.1.4.1.2011.5.25.100.1.3.1.7 |
hwSubIfVlanPolicyRowStatusThis object specifies the status of the sub-interface vlan table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.100.1.3.1.51 |
hwL3VlanTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.100.2 |
hwL3VlanConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.100.3 |
hwL3VlanCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.100.3.1 |
hwL3VlanGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.100.3.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
SNMP MIB module
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.