HUAWEI-LswRSTP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HUAWEI-LswRSTP-MIB.
Main OID:
hwLswRstpMib.1.3.6.1.4.1.2011.2.23.1.6
40
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
hwLswRstpMib MODULE-IDENTITY .1.3.6.1.4.1.2011.2.23.1.6 |
hwLswRstpMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.6.1 |
hwRstpEventsV2Definition point for RSTP notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.2011.2.23.1.6.1.0 |
hwRstpBpduGuardedThe SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.23.1.6.1.0.1 |
hwRstpRootGuardedThe SNMP trap that is generated when a root-guard port receives a superior bpdu. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.23.1.6.1.0.2 |
hwRstpBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.23.1.6.1.0.3 |
hwRstpLoopGuardedThe SNMP trap that is generated when a loop-guard port is aged out . NOTIFICATION-TYPE .1.3.6.1.4.1.2011.2.23.1.6.1.0.4 |
hwdot1dStpStatusBridge STP enabled/disabled staterw EnabledStatus .1.3.6.1.4.1.2011.2.23.1.6.1.1 |
hwdot1dStpForceVersionRunning mode of the bridge RSTP state machinerw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.2 |
hwdot1dStpDiameterPermitted amount of bridges between any two ends on the network.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.6.1.3 |
hwdot1dStpRootBridgeAddressMAC address of the root bridgero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.6.1.4 |
hwdot1dStpPortXTableRSTP extended information of the port SEQUENCE OF HwDot1dStpPortXEntry .1.3.6.1.4.1.2011.2.23.1.6.1.5 |
hwdot1dStpPortXEntryRSTP extended information of the port HwDot1dStpPortXEntry .1.3.6.1.4.1.2011.2.23.1.6.1.5.1 |
hwdot1dStpPortStatusRSTP status of the portrw EnabledStatus .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.1 |
hwdot1dStpPortEdgeportWhether the port can be an edge portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.2 |
hwdot1dStpPortPointToPointIt is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hwdot1dStpOperPortPointToPoint.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.3 |
hwdot1dStpMcheckCheck if the port transfer state machine entersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.4 |
hwdot1dStpTransLimitPacket transmission limit of the bridge in a duration of Hello Time.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.5 |
hwdot1dStpRXStpBPDUNumber of STP BPDU receivedro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.6 |
hwdot1dStpTXStpBPDUNumber of STP BPDU transmittedro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.7 |
hwdot1dStpRXTCNBPDUNumber of TCN BPDU receivedro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.8 |
hwdot1dStpTXTCNBPDUNumber of TCN BPDU transmittedro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.9 |
hwdot1dStpRXRSTPBPDUNumber of RSTP BPDU receivedro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.10 |
hwdot1dStpTXRSTPBPDUNumber of RSTP BPDU transmittedro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.11 |
hwdot1dStpClearStatisticsClear RSTP statistics. Read operation not supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.12 |
hwdot1dSetStpDefaultPortCostSet PathCost back to the default setting. Read operation not supported.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.13 |
hwdot1dStpRootGuardIf the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.rw EnabledStatus .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.14 |
hwdot1dStpLoopGuardLoop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.rw EnabledStatus .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.15 |
hwdot1dStpPortBlockedReasonRecord the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.16 |
hwdot1dStpRXTCBPDUThe number of received TC BPDUsro Counter32 .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.17 |
hwdot1dStpPortSendingBPDUTypeType of BPDU which the port is sending.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.18 |
hwdot1dStpOperPortPointToPointThis object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hwdot1dStpPortPointToPoint.ro Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.5.1.19 |
hwDot1dStpBpduGuardIf BPDU guard enabled. The edge port will discard illegal BPDU when enabledrw EnabledStatus .1.3.6.1.4.1.2011.2.23.1.6.1.6 |
hwDot1dStpRootTypeRoot type of the bridgerw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.7 |
hwDot1dTimeOutFactorTime Out Factor of the bridge.rw INTEGER .1.3.6.1.4.1.2011.2.23.1.6.1.8 |
hwDot1dStpPathCostStandardPath Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard.rw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.9 |
hwdot1dStpIgnoredVlanTableRSTP extended information of vlan SEQUENCE OF HwDot1dStpIgnoredVlanEntry .1.3.6.1.4.1.2011.2.23.1.6.1.10 |
hwdot1dStpIgnoredVlanEntryRSTP extended information of the vlan HwDot1dStpIgnoredVlanEntry .1.3.6.1.4.1.2011.2.23.1.6.1.10.1 |
hwdot1dVlanVlan id supportedro INTEGER .1.3.6.1.4.1.2011.2.23.1.6.1.10.1.1 |
hwdot1dStpIgnoreWhether the vlan is stp Ignoredrw Enumeration .1.3.6.1.4.1.2011.2.23.1.6.1.10.1.2 |