HUAWEI-POE-MIB
AI MIB Summary
The HUAWEI-POE-MIB enables SNMP-based monitoring and configuration of Power over Ethernet (PoE) parameters on Huawei network devices, specifically tracking per-port power allocation, consumption levels, and operational status to manage power distribution and prevent overloads.
The HUAWEI-POE-MIB contains objects to manage POE.
Main OID:
hwPoeMIB.1.3.6.1.4.1.2011.5.25.195
92
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
hwPoeMIBThe HUAWEI-POE-MIB contains objects to manage POE. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.195 |
hwPoeGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.195.1 |
hwPoePowerThis object identifies the maximum POE power of the system.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.1.1 |
hwPoePowerRsvPercentThis object identifies the reserved percent of total POE power.rw Integer32 .1.3.6.1.4.1.2011.5.25.195.1.4 |
hwPoePowerUtilizationThresholdThis object identifies the utilization threshold of total POE power.rw Integer32 .1.3.6.1.4.1.2011.5.25.195.1.5 |
hwPoeSlotTableThis object indicates the slot configuration table of POE. SEQUENCE OF HwPoeSlotEntry .1.3.6.1.4.1.2011.5.25.195.2 |
hwPoeSlotEntryThis object indicates the entry of the slot configuration table of POE. HwPoeSlotEntry .1.3.6.1.4.1.2011.5.25.195.2.1 |
hwPoeSlotIdThis object identifies the slot ID. Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.1 |
hwPoeSlotMaximumPowerThis object identifies the maximum power set by users. The value is expressed in mW.rw Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.2 |
hwPoeSlotAvailablePowerThis object idenfies the available Power. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.3 |
hwPoeSlotReferencePowerThis object identifies the total reference power of a slot. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.4 |
hwPoeSlotConsumingPowerThis object identifies the total consuming power of a slot. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.5 |
hwPoeSlotPeakPowerThis object identifies the total peak power of a slot. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.6 |
hwPoeSlotLegacyDetectThis object indicates the compatibility detection of a non-standard device. (1:enable; 2:disable(default))rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.195.2.1.7 |
hwPoeSlotPowerManagementMannerThis object identifies the power management manner. (1:manual, 2:auto(default)).rw Enumeration .1.3.6.1.4.1.2011.5.25.195.2.1.8 |
hwPoeSlotIsPoeDeviceThis object indicates whether the device supports PoE.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.2.1.9 |
hwPoeDimmIdThis object identifies the DIMM ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.10 |
hwPoeSlotPowerRsvPercentThis object identifies the reserved percent of POE power in slot.rw Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.11 |
hwPoeSlotPowerUtilizationThresholdThis object identifies the utilization threshold of total POE power in slot.rw Integer32 .1.3.6.1.4.1.2011.5.25.195.2.1.12 |
hwPoePortTableThis object indicates the table that contains the configuration parameters of a POE interface. One entry corresponds to a POE interface. SEQUENCE OF HwPoePortEntry .1.3.6.1.4.1.2011.5.25.195.3 |
hwPoePortEntryThis object indicates the entry of POE Port Table. HwPoePortEntry .1.3.6.1.4.1.2011.5.25.195.3.1 |
hwPoePortIfIndexThis object indicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.195.3.1.1 |
hwPoePortNameThis object indicates the interface name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.3.1.2 |
hwPoePortEnableThis object indicates the enabling status of an interface. (1:enable(default); 2:disable)rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.195.3.1.3 |
hwPoePortPriorityThis object identifies the priority of an interface. (1:critical, 2:high, 3:low(default))rw Enumeration .1.3.6.1.4.1.2011.5.25.195.3.1.4 |
hwPoePortMaximumPowerThis object identifies the maximum power of an interface.The value is expressed in mW.rw Integer32 .1.3.6.1.4.1.2011.5.25.195.3.1.5 |
hwPoePortPowerOnStatusThis object indicates the powering status of an interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.3.1.6 |
hwPoePortPowerStatusThis object indicates the status of an interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.3.1.7 |
hwPoePortPdClassThis object identifies the class of a PD.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.3.1.8 |
hwPoePortReferencePowerThis object identifies the guaranteed power of an interface. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.3.1.9 |
hwPoePortConsumingPowerThis object identifies the consuming power of an interface. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.3.1.10 |
hwPoePortPeakPowerThis object identifies the peak power of an interface. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.3.1.11 |
hwPoePortAveragePowerThis object identifies the average power of an interface. The value is expressed in mW.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.3.1.12 |
hwPoePortCurrentThis object indicates the current of an interface. The value is expressed in mA.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.3.1.13 |
hwPoePortVoltageThis object indicates the voltage of an interface. The value is expressed in V.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.3.1.14 |
hwPoePortManualOperationThis object indicates that a PD connected to an interface is powered on or powered off manually.rw Enumeration .1.3.6.1.4.1.2011.5.25.195.3.1.15 |
hwPoePortPoweroffTimeRangeSwitchThis object indicates whether the time range of POE power off is confugred on the port.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.195.3.1.16 |
hwPoePortPoweroffTimeRangeNameThis object indicates that time range name of POE power off configured on the port.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.195.3.1.17 |
hwPoePortJudgeTableThis object indicates the table that contains the judgement of whether port supports POE. SEQUENCE OF HwPoePortJudgeEntry .1.3.6.1.4.1.2011.5.25.195.4 |
hwPoePortJudgeEntryThis object indicates the entry of table. HwPoePortJudgeEntry .1.3.6.1.4.1.2011.5.25.195.4.1 |
hwPoePortJudgeIfIndexThis object indicates the interface index. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.195.4.1.1 |
hwPoePortJudgeIsSupportThis object indicates whether the interface supports POE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.195.4.1.2 |
hwPoePowerInfoTableThis object indicates the table that contains the power information of POE. SEQUENCE OF HwPoePowerInfoEntry .1.3.6.1.4.1.2011.5.25.195.5 |
hwPoePowerInfoEntryThis object indicates the entry of table. HwPoePowerInfoEntry .1.3.6.1.4.1.2011.5.25.195.5.1 |
hwPoePowerInfoDeviceIndexThis object indicates the device index.
Index: reserved/chassis/slot.
The index is format by 4 bytes(8bits for 1 byte): reserved is 1 byte(0x00),
chassis is 12bits and slot is also 12bits.
e.g. chassis=1, slot=0, the index is 0x00001000.
If device is chassis, the slot is always 0.
If device is box, the chassis is always 0. Integer32 .1.3.6.1.4.1.2011.5.25.195.5.1.1 |
hwPoePowerInfoDeviceNameThis object indicates the table that contains the name of device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.195.5.1.2 |
hwPoePowerInfoDeviceTotalPowerThis object indicates the table that contains the total power of POE.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.5.1.3 |
hwPoePowerInfoDeviceTotalAvailablePowerThis object indicates the table that contains the total available power of POE.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.5.1.4 |
hwPoePowerInfoDeviceReservedPowerThis object indicates the table that contains the reserved power of POE.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.5.1.5 |
hwPoePowerInfoDeviceUsedPowerThis object indicates the table that contains the used power of POE.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.5.1.6 |
hwPoePowerInfoDeviceRemainPowerThis object indicates the table that contains the remain power of POE.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.5.1.7 |
hwPoeTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.195.39 |
hwPoePdPriorityThis object identifies the PD priority.(1:critical, 2:high, 3:low(default))ro Enumeration .1.3.6.1.4.1.2011.5.25.195.39.1 |
hwPoeSlotNumThis object identifies the slot ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.39.2 |
hwPoeCurConsumPowerThis object identifies the current consuming power.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.39.3 |
hwPoeConsumPowerThresholdThis object identifies the threshold of consuming power.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.39.4 |
hwPoeDeviceIDThis object identifies the device ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.39.5 |
hwFrameIDThis object identifies the CSS Frame ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.39.6 |
hwPoeChipIDThis object identifies the control chip ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.195.39.7 |
hwPoeNotification OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.195.40 |
hwPoeDimmErrorThis object indicates the Dimm chip error. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.1 |
hwPoePowerOffThis object indicates a PD connected to an interface is powered off. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.2 |
hwPoePowerOnThis object indicates that a PD connected to an interface is powered on. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.3 |
hwPoeSlotPowerOverloadThis object indicates that the power consumed by a slot exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.4 |
hwPoeSlotPowerOverloadResumeThis object indicates that the power consumed by a slot does not exceed the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.5 |
hwPoePdPowerOverloadThis object indicates the power consumed by a PD connected to an interface exceeds the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.6 |
hwPoePdPowerOverloadResumeThis object indicates that the power consumed by a PD connected to an interface does not exceed the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.7 |
hwPoePdConnectedThis object indicates that a PD is connected to an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.8 |
hwPoePdDisconnectedThis object indicates that a PD is disconnected from an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.9 |
hwPoePdClassInvalidThis object indicates that a PD of an invalid class is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.10 |
hwPoePdClassOvercurrentThis object indicates that overcurrent occurs during the classification of a PD. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.11 |
hwPoePdPowerOvercurrentThis object indicates that overcurrent occurs during the powering of a PD. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.12 |
hwPoePdPowerOvercurrentResumeThis object indicates that overcurrent is rectified. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.13 |
hwPoePowerOnFailThis object indicates that a PD fails to be powered on. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.14 |
hwPoePowerOffCurrentLimitsThis object indicates that a PD is powered off because its current meets or exceeds the limit of current. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.15 |
hwPoePdPriorityDifferentThis object indicates that the priority of PD is different from the port. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.16 |
hwPoePowerOverUtilizationThresholdThis object indicates that the PSE is overdrawing power. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.17 |
hwPoePowerOverUtilizationThresholdResumeThis object indicates that the PSE is not overdrawing power. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.18 |
hwPoeBoardInsertedWrongFrameThis object indicates that the poe board is inserted in the frame does not support poe. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.19 |
hwPoePowerAbsentThis object indicates that the poe power is absent. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.20 |
hwPoePowerAbsentResumeThis object indicates that the poe power is present. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.21 |
hwPoeRpsPowerOutputAlarmThis object indicates that the RPS power can not provide POE power for this device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.22 |
hwPoeRpsPowerOutputAlarmResumeThis object indicates that the RPS power can provide POE power for this device. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.23 |
hwPoeControlChipFailThis object indicates that the poe control chip is failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.24 |
hwPoeControlChipFailResumeThis object indicates that the poe control chip has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.25 |
hwPoePSEPowerCutThis object indicates that the poe pse power is not enough. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.26 |
hwPoePSEPowerCutResumeThis object indicates that the poe pse power cut has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.27 |
hwPoeSlotPowerCutThis object indicates that the poe slot power is not enough. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.28 |
hwPoeSlotPowerCutResumeThis object indicates that the poe slot power cut has resumed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.195.40.29 |
hwPoeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.195.100 |
hwPoeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.195.100.1 |
hwPoeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.195.100.2 |
More MIBs from Huawei
Browse all HuaweiMIBs →HUAWEI-MIB
The HUAWEI-MIB module provides a unified namespace for monitoring and managing generic system resources, interface statistics, and hardware telemetry across Huawei network devices. It serves as the foundational OID repository for retrieving standard operational data, including CPU utilization, memory usage, interface counters, and device status, required for comprehensive network management via SNMP.
3074 objects→
HUAWEI-SERVER-IBMC-MIB
Standard SNMP MIB module defining data structures for HUAWEI-SERVER-IBMC-MIB.
2171 objects→
HUAWEI-XPON-MIB
The HUAWEI-XPON-MIB module enables Network Management Systems to monitor and configure GPON and EPON optical line terminals and optical network units, specifically tracking PON port status, optical power levels, bandwidth allocation, and subscriber session states.
1553 objects→
H3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1462 objects→
HUAWEI-WLAN-CONFIGURATION-MIB
The HUAWEI-WLAN-CONFIGURATION-MIB facilitates the configuration and monitoring of Huawei Wireless LAN access point parameters, specifically managing AP port link profiles and broadcast suppression settings. This module enables administrators to enforce traffic control policies and optimize wireless network performance by adjusting switch profile associations and limiting broadcast traffic on specific ports.
1280 objects→
HUAWEI-XQoS-MIB
The HUAWEI-XQoS-MIB enables configuration and real-time monitoring of Class Based QoS parameters on Huawei network devices, specifically tracking traffic classification rules, queue states, and policy enforcement metrics. This module facilitates granular control over bandwidth allocation and packet prioritization by exposing objects for policy definitions, interface queue depths, and dropped packet counters associated with QoS classes.
1134 objects→