MIB Catalog

MIB module

This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which th

This MIB defines the configuration and statistic information of stations. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter

This MIB provides information about WIDS feature. GLOSSARY Wireless Intrusion Detection Sensor (WIDS) WIDS is designed to be employed in an area that is serviced by an existing wireless network. It ai

This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures

The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receive

The objects in this MIB module are used to manage the Ethernet in the First Mile (EFM) Multi Point Control Protocol (MPCP) Interfaces as defined in IEEE Draft P802.3ah/D3.0 clause 64,65. The following

This MIB is to provide the definition of the DSP(Digital Signal Processing) status.

This MIB is Dynamic Virtual Private Network(Dvpn) mib. This MIB is applicable to router. Some objects in this may be used only for some specific products, so users should refer to the related document

This MIB provides E1 interface information that are excluded by RFC 1213 and RFC 2233

This MIB provides E1/T1 voice interface information that are excluded by RFC 1213 and RFC 2233

The MIB module for managing the new Ethernet OAM features introduced by the Ethernet in the First Mile task force (IEEE 802.3ah). The functionality presented here is based on IEEE 802.3ah [802.3ah], r

The private MIB file includes the general extent information of the device.

The private MIB includes the definition of the object identifiers on products, which are used by the entPhysicalTable of the ENTITY-MIB to uniquely identify the type of each physical entry.

The private MIB file includes the general relation information information of entities. Entity MIB is used to express the physical location of the physical entities. Other relations, such as stack por

The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the

The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 cla

The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port.

The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Opti

The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit).

EVB management information base for managing devices that support Ethernet Virtual Bridging. This MIB is an extension of IEEE8021-EVB-MIB.

Ethernet Virtual Connection MIB

This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI).

This MIB module is for representing fabric login information.

This MIB module is intended for the management of Fibre Channel (FC) Name Server.

This MIB module is for the management of the Fibre Channel Ping functionality.

This MIB contains the objects for FC port security.

This MIB module is for the management of the Fibre Channel Trace Route functionality.

This MIB module is intended for management of FC(Fibre Channel) Zoning entities, including Basic Zoning Management and Enhanced Zoning Management.

This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an object that represents eit

This MIB module is for configuring and monitoring the working mode of FCoE (Fibre Channel over Ethernet) features.

This MIB module is for monitoring Fabric Device Management Interface (FDMI) related entities. This MIB module defines objects for managing the devices such as Host Bus Adapter (HBA). It provides devic

The MIB is designed to manage Firewall products.

This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.

Flow template management information base.

This MIB contains objects to Manage configuration and Monitor running state for Class Based FR QoS feature.

this MIB will maintain Fabric topology management. The MIB includes unit-id, unit-name and fabric authentication information.

This MIB contains objects to Manage configuration and Monitor running state for GRE.

This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.

The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.

This MIB describes IDS private information. IDS(Instruction Detecting System) is used to detect intruder activity.

This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users sh

Interface QoS management information base.

The MIB is designed to get statistic information of IKE tunnels. With this MIB, we can get information of a certain IKE tunnel or all IKE tunnels

All the configuration of the info center can be managed by info center MIB.

The MIB module for managing IPv4 address.

This MIB is objects used to describe IP broadcast features or functions. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire mor

This MIB is used to acquire ip accounting information. The hpnicfIpaAccountListTable is set by user to define the group of ip address which they want to account. This module can be enabled in each por

This MIB provides mechanisms to monitor all network elements(NE) in Ipran Data Communication Network.

The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.

The MIB is designed to get statistic information of IPsec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.

The MIB module for managing IPv6 address

This MIB defines management information used on products which support ipx protocol. It includes 4 parts: 1.ipx interface configuration group - This group contains configurable management information

This MIB provides objects for upgrading images on modules in the system, objects for showing the result of an upgrade operation, and objects for showing the result of a test operation. To perform an u

The MIB module is used for l2 isolation.

This MIB contains objects to manage configuration of L2TP. There are no constraints on this MIB.

This MIB contains objects to manage L2VPN.

This MIB contains objects to manage PWE3.

See description above

LACP extend MIB.

The private mib file includes the loadbalance information of the device.

The private MIB file includes the LB information of the device.

Lawful Interception MIB

This MIB is used to manage license, including license key, activation key and activation file.

LLDP extended management infomation.

This MIB provides the definition of the local AAA Server.

Loops may cause broadcast storms. The purpose of loopback detection is to detect loops on the device and to protect the network.

The latest baseline.

MIB module

MIB module

MIB module

MIB module

MIB module

MIB module

This MIB defines objects for managing MSTP.

MIB module

Module node for qos and acl.

MIB module

MIB module

MIB module

MIB module

This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in

The initial version of this MIB file.

This MIB contains objects to manage MDC (Multitenant Device Context) operations. Such as: 1. Configure MDCs for a device and display MDCs and their status. 2. Assign CPU, storage space, and memory spa

802.1ah MAC-in-MAC MIB

This MIB defines objects for managing mirror group.

The HPN-ICF-MP-MIB provides read access to MP(Multilink PPP) link status information. The information available through this MIB includes: the father

The HPN-ICF-MP-V2-MIB provides read access to MP(Multilink PPP) link status information. The information available through this MIB includes: the father channel, the bundled son channel, the slot on w

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and

All rights reserved

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS) Router as defined in: Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, I

This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and

Multiprotocol Label Switching MIB

This MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to adm

This MIB contains objects to configure mpls protect-switch module.

Multiprotocol Label Switching Traffic Engineering MIB

The MPM (Multicast Port Management) MIB.

The multicast global configuration MIB

IGMP/MLD Snooping Management MIB

This MIB contains objects to manage configuration of NAT. There are no constraints on this MIB.

This MIB file is to provide the object definition of the network management parameters. These parameters are used to identify devices. It is useful for devices management in a dynamic address assignme

This MIB module is for the management of N_Port Virtualization or NPV within the framework of N_Port virtualization(NPV) architecture. N_Port virtualization reduces the number of Fibre Channel domain

The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.

This MIB contains objects to manage the configuration and status information of network traffic statistics. It classifies the IP packets by source IP address, source port, destination IP address, dest

This MIB provides mechanisms to monitor a NTP server.

The NVGRE MIB.

This MIB is used to acquire information from the agent. Before a NMS takes some actions, it is not sure whether the agent supports it or not. This MIB is used to solve this problem.

Object-policy management information base for managing devices that support object policy.

MIB module

This MIB file provides information about OSPF.

This MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing.

This MIB is used to manage Port Extender (PEX) information. This MIB is applicable to products that support PEX.

The MIB module is used for managing port security.

The MIB module is used for managing portal.

This MIB is to provide the definition of the POSA (Point Of Sale Access) system.

Description.

This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.

The MIB module is used for PPPoE server.

MIB module

This MIB is used to manage and configure the priority of specified protocol. This MIB is applicable to routers, switches and other products.