HPN-ICF-LSW-DEV-ADM-MIB
AI MIB Summary
The HPN-ICF-LSW-DEV-ADM-MIB module provides management access to administrative parameters and device status indicators for HP ProCurve (Aruba) Layer 2 and Layer 3 switches. It enables monitoring of critical device states, including port configurations, system uptime, and interface administrative status via SNMP.
The latest baseline.
Main OID:
hpnicfLswDeviceAdmin.1.3.6.1.4.1.11.2.14.11.15.8.35.18
104
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
hpnicfLswDeviceAdminThe latest baseline. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.18 |
hpnicfLswSystemPara OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1 |
hpnicfLswSysIpAddrSystem IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.1 |
hpnicfLswSysIpMaskMask of the system IP address.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.2 |
hpnicfLswSysCpuRatioCPU usage of the system in accuracy of 1%, and the range of value is 1 to 100.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.3 |
hpnicfLswSysVersionInformation of the system version.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.4 |
hpnicfLswSysTimeSystem time.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.5 |
hpnicfLswSysUNMCastDropEnableEnable or disable discarding of unknown multicast packet.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.6 |
hpnicfLswSysManagementVlanSystem management VLAN.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.7 |
hpnicfLswSysVlanRangeSystem VLAN range, if set VLAN range, must bind mangement IP/Mask.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.8 |
hpnicfLswSysManagementIpAddrSystem IP address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.9 |
hpnicfLswSysManagementIpMaskMask of the system IP address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.10 |
hpnicfMacAddressCountPortSupportted MAC address number on port.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.11 |
hpnicfMacAddressCountMachineSupportted MAC address number on machine.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.12 |
hpnicfLswSysPhyMemoryThe memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.13 |
hpnicfLswSysMemoryThe memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.14 |
hpnicfLswSysMemoryUsedThe system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.15 |
hpnicfLswSysMemoryRatioThe percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hpnicfLswSysMemoryUsed hpnicfLswSysMemoryRatio = -------------------- hpnicfLswSysMemory For the distributed device, it represents the memory used ratio on the master slot.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.16 |
hpnicfLswSysTemperatureThe temperature of system. For the distributed device, it represents the temperature on the master slot.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.17 |
hpnicfLswSysPhyMemRevSize of the memory space for the software platform. This node is used to replace hpnicfLswSysPhyMemory. For a distributed device, it indicates the size of the memory space on the active MPU.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.18 |
hpnicfLswSysMemRevSize of the physical memory space. This node is used to replace hpnicfLswSysMemory. For a distributed device, it indicates the size of the memory space on the active MPU.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.19 |
hpnicfLswSysMemUsedRevSize of the memory space used by the software system. This node is used to replace hpnicfLswSysMemoryUsed. For a distributed device, it indicates the size of the memory space on the active MPUro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.20 |
hpnicfLswSlotConf OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4 |
hpnicfLswFrameTableFrame information table. SEQUENCE OF HpnicfLswFrameEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2 |
hpnicfLswFrameEntryFrame description table entry. HpnicfLswFrameEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1 |
hpnicfLswFrameIndexThe unique index of frame.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.1 |
hpnicfLswFrameTypeFrame type.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.2 |
hpnicfLswFrameDescFrame description.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.3 |
hpnicfLswSlotNumberNumber of slots of the current frame.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.4 |
hpnicfLswFrameAdminStatusThe Status of frame.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.5 |
hpnicfLswSlotTableSlot description table. SEQUENCE OF HpnicfLswSlotEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3 |
hpnicfLswSlotEntrySlot description table entry. HpnicfLswSlotEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1 |
hpnicfLswSlotIndexSlot index. When the slot is empty, listed as vacant slot.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.1 |
hpnicfLswSlotTypeSlot type. BOM number is recommended.ro HpnicfLswTypeOfSlot .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.2 |
hpnicfLswSlotDescSlot description.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.3 |
hpnicfLswSlotCpuRatioCPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.4 |
hpnicfLswSlotPcbVersionHardware version of the board.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.5 |
hpnicfLswSlotSoftwareVersionSoftware version of the board.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.6 |
hpnicfLswSubslotNumberNumber of the cards of the board.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.7 |
hpnicfLswSlotAdminStatusSlot status.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.8 |
hpnicfLswSlotOperStatusSlot operation status.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.9 |
hpnicfLswSlotPhyMemoryThe memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.10 |
hpnicfLswSlotMemoryThe memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.11 |
hpnicfLswSlotMemoryUsedThe system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.ro Unsigned32 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.12 |
hpnicfLswSlotMemoryRatioThe percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.13 |
hpnicfLswSlotTemperatureThe temperature of system on the board.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.14 |
hpnicfLswSlotPktBufFreeThe number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.15 |
hpnicfLswSlotPktBufInitThe number of packet buffers allocated when the switch booted.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.16 |
hpnicfLswSlotPktBufMinThe smallest number of packet buffers available since the switch booted.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.17 |
hpnicfLswSlotPktBufMissThe number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.18 |
hpnicfLswSlotRunTimeRuntime of board. For example, if a board has run for 2 days 4 hours and 20 minutes, its runtime is displayed as 0 weeks, 2 days, 4 hours, 20 minutes.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.19 |
hpnicfLswSlotPhyMemRevSize of the memory on the board. This node is used to replace hpnicfLswSlotPhyMemory.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.20 |
hpnicfLswSlotMemRevSize of the memory space for the software system on the board. This node is used to replace hpnicfLswSlotMemory. Note that the system memory means the memory can be used by the software platform.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.21 |
hpnicfLswSlotMemUsedRevSize of the memory space used by the software system on the board. This node is used to replace hpnicfLswSlotMemoryUsed. Note that the system memory means the memory can be used by the software platform.ro CounterBasedGauge64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.22 |
hpnicfLswSlotModelDescModel of the extended device in a slot. Examples of extended devices include PEXs and firewall modules. If the device in the slot is not an extended device, a zero-length string is returned.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.23 |
hpnicfLswSubslotTableSubslot description table. SEQUENCE OF HpnicfLswSubslotEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4 |
hpnicfLswSubslotEntrySubslot description table entry. HpnicfLswSubslotEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1 |
hpnicfLswSubslotIndexSubslot index.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.1 |
hpnicfLswSubslotTypeType of the pinch board in the subslot.ro HpnicfLswTypeOfSlot .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.2 |
hpnicfLswSubslotPortNumNumber of physical ports in the pinch board.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.3 |
hpnicfLswSubslotAdminStatusStatus of the pinch board in the subslot.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.4 |
hpnicfLswSubslotFirstIfIndexThe value of ifIndex of the first physical port in the pinch board.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.5 |
hpnicfLswPortTablePort configuration table. SEQUENCE OF HpnicfLswPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5 |
hpnicfLswPortEntryPort configuration table entry. HpnicfLswPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1 |
hpnicfLswPortIndexThe port number on the device. The first port number is 1, which is reserved if the port does not exist.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.1 |
hpnicfLswPortTypeNormally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.2 |
hpnicfLswPortIfindexThe value of ifIndex of the port.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.3 |
hpnicfLswPortIsPluggedPort is plugged or not.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.4 |
hpnicfLswPortLoopbackTablePort loopback test table. SEQUENCE OF HpnicfLswPortLoopbackEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6 |
hpnicfLswPortLoopbackEntryPort loopback test table entry. HpnicfLswPortLoopbackEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1 |
hpnicfLswPortLoopbackIsSupportThe loopback type can be supported by current port.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.1 |
hpnicfLswPortLoopbackOperatePort loopback operate type. Read operation not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.2 |
hpnicfLswPortLoopbackResultLoopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.3 |
hpnicfLswPortLoopbackAutoStopSupportWhether this port support NEED-MANNUL-NOLOOP mode or not.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.4 |
hpnicfLswPortLoopbackRemoteResultThe remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.5 |
hpnicfLswPortLoopbackLocalResultThe local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.6 |
hpnicfLswPortLoopbackInternalResultThe internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.7 |
hpnicfLswPortLoopbackExternalResultThe external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.8 |
hpnicfLswFabricTableThis table contains the information of fabric. SEQUENCE OF HpnicfLswFabricEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7 |
hpnicfLswFabricEntryAn entry in hpnicfLswFabricTable. HpnicfLswFabricEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1 |
hpnicfLswFabricChannelIndexThe channel number of fabric. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.1 |
hpnicfLswFabricUtilInIngress utilization of fabric.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.2 |
hpnicfLswFabricUtilOutEgress utilization of fabric.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.3 |
hpnicfLswFabricPeakInIngress peak of utilization for fabric.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.4 |
hpnicfLswFabricPeakInTimeIngress peak time of utilization for fabric.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.5 |
hpnicfLswFabricPeakOutEgress peak of utilization for fabric.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.6 |
hpnicfLswFabricPeakOutTimeEgress peak time of utilization for fabric.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.7 |
hpnicfLswNetworkHealthMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.8 |
hpnicfLswExtendModelTableThis table contains the extended device models supported by the device. Examples of extended devices include PEXs and firewall modules. SEQUENCE OF HpnicfLswExtendModelEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9 |
hpnicfLswExtendModelEntryThis entry contains information about an extended device model. HpnicfLswExtendModelEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1 |
hpnicfLswExtendModelIndexIndex of the extended device model. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.1 |
hpnicfLswExtendModelDescExtended device model. Examples of extended devices include PEXs and firewall modules.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.2 |
hpnicfLswCpuTableCpu description table. SEQUENCE OF HpnicfLswCpuEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10 |
hpnicfLswCpuEntryCPU description table entry. HpnicfLswCpuEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1 |
hpnicfLswCpuIndexCPU index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.1 |
hpnicfLswCpuEntityIndexThe entity index of the CPU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.2 |
hpnicfLswCpuRatioCPU usage in accuracy of 1%ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.3 |
hpnicfLswCpuSoftwareVersionSoftware version of the CPU.ro DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.4 |
hpnicfLswCpuAdminStatusCPU status.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.5 |
hpnicfLswCpuOperStatusCPU operation status.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.6 |
hpnicfLswCpuPhyMemoryThe physical memory on the node.ro CounterBasedGauge64 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.7 |
hpnicfLswCpuMemoryThe system memory on the node. Note that the system memory means the memory that can be used by the software platform.ro CounterBasedGauge64 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.8 |
hpnicfLswCpuMemoryUsedThe system memory in use on the node. Note that the system memory means the memory that can be used by the software platform.ro CounterBasedGauge64 UNITS "byte" .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.9 |
hpnicfLswCpuMemoryRatioThe percentage of system memory in use on the node. Note that the system memory means the memory that can be used by the software platform.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.10.1.10 |