BLADETYPE5-NETWORK-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
2240 total| Object Name |
|---|
hpProLiant-GbE2c-1-10G-InterconnectSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.1.1 |
IMPORTS Unknown .1.3.6.1.4.1.11.2.3.7.11.33.5.1.1 |
agent OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1 |
agentConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1 |
agSystem OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1 |
agApplyConfigurationThis is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new_config block.
other(1) is returned when this object ie read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.2 |
agSavePendingThis object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.3 |
agSaveConfigurationThis is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.4 |
agRevertThis is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new_config block.
other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.5 |
agRevertApplyThis is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.6 |
agResetThis is an action object to reboot the switch.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)...rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.7 |
agConfigForNxtResetThe configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration blockrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.8 |
agImageForNxtResetThe software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.9 |
agSoftwareVersionThe version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.10 |
agBootVerThe version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.11 |
agImage1VerThe version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.12 |
agImage2VerThe version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.13 |
agRtcDateThe date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.14 |
agRtcTimeThe time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.15 |
agLastSetErrorReasonThe error reason of the last SET failure.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.16 |
agCurCfgHttpServerPortThe TCP port number that the HTTP server is listening to
in the current_configuration block.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.17 |
agNewCfgHttpServerPortThe TCP port number that the HTTP server is listening to
in the new_configuration block.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.18 |
agCurCfgLoginBannerThe user defined login banner.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.19 |
agNewCfgLoginBannerThe user defined login banner.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.20 |
agCurCfgConsoleEnable or disable console output of syslog messages.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.23 |
agNewCfgConsoleEnable or disable console output of syslog messages.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.24 |
agCurCfgBootpEnable or disable the use of BootP, as currently configured in the
current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.29 |
agNewCfgBootpEnable or disable the use of BootP, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.30 |
agSlotNumberIdentifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.31 |
agCurCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.32 |
agNewCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the state
back to 'idle' so others can issue the commands via SNMP.
agSnmpTimeout indicates the number of minutes before the resources
are freed and the state set back to 'idle' if this operation is not
performed by the user.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.33 |
agCurCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet
sessions.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.34 |
agNewCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet
sessions.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.35 |
agClearFlashDumpThis is an action object to clear the FLASH dump.
ok(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.36 |
agRackIdThe rack unique identifier.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.37 |
agChassisChassis serial number.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.38 |
agCurCfgTftpServerPortThe TCP port number that the TFTP server is listening to
in the current_configuration block.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.39 |
agNewCfgTftpServerPortThe TCP port number that the TFTP server is listening to
in the new_configuration block.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.40 |
agCurCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to
in the current_configuration block.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.49 |
agNewCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to
in the new_configuration block.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.50 |
agCurDaylightSavingsThe daylight savings location.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.51 |
agNewDaylightSavingsThe daylight savings location.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.52 |
agCfgSysDlightEnable/disable daylight savings time.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.53 |
agCurCfgIdleCLITimeoutSet idle CLI sessions timeout.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.55 |
agNewCfgIdleCLITimeoutSet idle CLI sessions timeout.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.56 |
agCurCfgUfdTrapThe current status of the UFDFO SNMP trap.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.57 |
agNewCfgUfdTrapEnable or disable sending UFDFO SNMP trap.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.58 |
agCurCfgRemindersCurrent status of reminders feature.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.59 |
agNewCfgRemindersEnable or disable reminders feature.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.60 |
agCurBootNxtCliModeCurrent boot mode.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.66 |
agNewBootNxtCliModeNext cli boot mode.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.67 |
agCurCfgDhcpEnable or disable the use of DHCP, as currently configured in the
current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.70 |
agNewCfgDhcpEnable or disable the use of DHCP, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.71 |
agCurCfgHpromptCurrent status of hprompt.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.73 |
agNewCfgHpromptNew status of hpprompt.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.75 |
agCurCfgLoginNoticeThe user defined login notice.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.76 |
agNewCfgLoginNoticeThe user defined login notice.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.77 |
agCurBootNxtCliModePromptCurrent status of selectable CLI mode prompt.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.78 |
agNewBootNxtCliModePromptNext status of selectable CLI mode prompt.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.79 |
agCurCfgOldDstEnable or disable system DST for US.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.82 |
agNewCfgOldDstEnable or disable system DST for US.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.83 |
agHavePanicDumpThis object, when read, gives the user the information
whether a panic dump exist in flash.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.1.84 |
agPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2 |
agPortTableMaxEntThe maximum number of rows in the port configuration host table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.1 |
agPortCurCfgTableThe table of port configuration in the current_configuration block. SEQUENCE OF AgPortCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2 |
agPortCurCfgTableEntryA row in the port table in the current_configuration block. AgPortCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1 |
agPortCurCfgIndxThe index of the row in port configurations table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.1 |
agPortCurCfgStateThis is the state of the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.2 |
agPortCurCfgVlanTagThis is VLAN tag state of the portro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.3 |
agPortCurCfgRmonThis object is used to turn RMON on or off on the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.5 |
agPortCurCfgPVIDThe default VLAN ID for the port.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.6 |
agPortCurCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.11 |
agPortCurCfgGigEthSpeedSelects the port speed for gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.12 |
agPortCurCfgGigEthModeThis object is used to select port mode for gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.13 |
agPortCurCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.14 |
agPortCurCfgPortNameThe switch port name.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.15 |
agPortCurCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.18 |
agPortCurCfgTagPVIDThis is PVID tag state of the portro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.19 |
agPortCurCfgMulticastThresholdCurrent status of the port's Multicast Threshold.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.20 |
agPortCurCfgMulticastThresholdRateCurrent port's Multicast Threshold Rate.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.21 |
agPortCurCfgBroadcastThresholdCurrent status of the port's Broadcast Threshold.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.22 |
agPortCurCfgBroadcastThresholdRateCurrent port's Broadcast Threshold Rate.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.23 |
agPortCurCfgDLFThresholdCurrent status of the port's Destination Lookup Fail Threshold.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.24 |
agPortCurCfgDLFThresholdRateCurrent port's Destination Lookup Fail Threshold Rate.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.25 |
agPortCurCfgTypeThe switch port type.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.2.1.28 |
agPortNewCfgTableThe table of port configuration in the new_configuration block. SEQUENCE OF AgPortNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3 |
agPortNewCfgTableEntryA row in the port configuration table in the new_configuration block. AgPortNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1 |
agPortNewCfgIndxThe index of the row in port configurations table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.1 |
agPortNewCfgStateThis is the state of the port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.2 |
agPortNewCfgVlanTagThis is VLAN tag state of the portrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.3 |
agPortNewCfgRmonThis object is used to turn RMON on or off on the port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.5 |
agPortNewCfgPVIDThe default VLAN ID for the port.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.6 |
agPortNewCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.11 |
agPortNewCfgGigEthSpeedSelects the port speed for gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.12 |
agPortNewCfgGigEthModeThis object is used to select port mode for gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.13 |
agPortNewCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.14 |
agPortNewCfgPortNameThe switch port name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.15 |
agPortNewCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.
By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface (as defined in the
ifStackTable), and disabled(2) otherwise.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.18 |
agPortNewCfgTagPVIDThis is PVID tag state of the portrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.19 |
agPortNewCfgMulticastThresholdNew status of the port's Multicast Threshold.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.20 |
agPortNewCfgMulticastThresholdRateNew port's Multicast Threshold Rate.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.21 |
agPortNewCfgBroadcastThresholdNew status of the port's Broadcast Threshold.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.22 |
agPortNewCfgBroadcastThresholdRateNew port's Broadcast Threshold Rate.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.23 |
agPortNewCfgDLFThresholdNew status of the port's Destination Lookup Fail Threshold.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.24 |
agPortNewCfgDLFThresholdRateNew port's Destination Lookup Fail Threshold Rate.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.25 |
agPortNewCfgTypeThe switch port type.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.2.3.1.28 |
agRadiusConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3 |
radCurCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.1 |
radNewCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.2 |
radCurCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.3 |
radNewCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.4 |
radCurCfgPortSpecify the RADIUS port number.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.5 |
radNewCfgPortSpeicfy the RADIUS port number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.6 |
radCurCfgTimeoutThe maximum number of seconds before resending authentication
to RADIUS server.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.7 |
radNewCfgTimeoutThe maximum number of seconds before resending authentication
to RADIUS server.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.8 |
radCurCfgRetriesNumber of retries to the RADIUS server.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.9 |
radNewCfgRetriesNumber of retries to the RADIUS server.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.10 |
radCurCfgStateEnable or disable RADIUS authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.11 |
radNewCfgStateEnable or disable RADIUS authentication.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.12 |
radCurCfgAuthenStringThe RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.13 |
radNewCfgAuthenStringThe RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.14 |
radCurCfgBackdoorEnable or disable RADIUS backdoor for telnet/ssh/http/https.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.15 |
radNewCfgBackdoorEnable or disable RADIUS backdoor for telnet/ssh/http/https.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.16 |
radCurCfgAuthenSecondStringThe second RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.17 |
radNewCfgAuthenSecondStringThe second RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.18 |
radCurCfgSecBdEnable or disable RADIUS secure backdoor for telnet.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.19 |
radNewCfgSecBdEnable or disable RADIUS secure backdoor for telnet.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.3.20 |
agNTP OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4 |
agCurCfgNTPServerThe NTP Server Address.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.1 |
agNewCfgNTPServerThe NTP Server Address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.2 |
agCurCfgNTPResyncIntervalThe NTP Server resync interval in minutes.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.3 |
agNewCfgNTPResyncIntervalThe NTP Server resync interval in minutes.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.4 |
agCurCfgNTPServiceEnable/disable NTP Service.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.9 |
agNewCfgNTPServiceEnable/disable NTP Service.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.10 |
agCurCfgNTPSecServerThe Secondary NTP Server Address.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.11 |
agNewCfgNTPSecServerThe Secondary NTP Server Address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.4.12 |
agSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5 |
agCurCfgSyslogHostThe syslog host IP address, as currently configured in
the current_configuration block.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.1 |
agNewCfgSyslogHostThe syslog host IP address, in the new_configuration block.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.2 |
agCurCfgSyslog2HostThe second syslog host IP address, as currently configured in
the current_configuration block.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.3 |
agNewCfgSyslog2HostThe second syslog host IP address, in the new_configuration block.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.4 |
agCurCfgSyslogFacThe facility of syslog host in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.5 |
agNewCfgSyslogFacThe facility of syslog host in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.6 |
agCurCfgSyslog2FacThe facility of syslog2 host in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.7 |
agNewCfgSyslog2FacThe facility of syslogs host in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.8 |
agClrSyslogMsgsClears all current Syslog messages.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.9 |
agSyslogMsgTableMaxSizeThe maximum number of rows in the syslog message table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.10 |
agSyslogMsgTableThe table of syslog messages. SEQUENCE OF AgSyslogMsgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11 |
agSyslogMsgTableEntryA syslog message stored on the switch. AgSyslogMsgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1 |
agSyslogMsgIndexThe syslog message table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1.1 |
agSyslogMessageThe syslog message.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.11.1.2 |
agLog OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12 |
agNewCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.1 |
agCurCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.2 |
agNewCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.3 |
agCurCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.4 |
agNewCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP
trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.5 |
agCurCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP
trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.6 |
agNewCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.7 |
agCurCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, as
currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.8 |
agNewCfgSyslogTrapStgEnable or disable spanning tree syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.9 |
agCurCfgSyslogTrapStgEnable or disable spanning tree syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.10 |
agNewCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.11 |
agCurCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.12 |
agNewCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.19 |
agCurCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.20 |
agNewCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.21 |
agCurCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.22 |
agNewCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.25 |
agCurCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, as currently configured
in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.26 |
agNewCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.31 |
agCurCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.32 |
agNewCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.35 |
agCurCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.36 |
agNewCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap,
in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.41 |
agCurCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap,
as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.42 |
agNewCfgSyslogTrapRmonEnable or disable rmon related syslog and SNMP trap,
in the new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.45 |
agCurCfgSyslogTrapRmonEnable or disable rmon related syslog and SNMP trap,
as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.46 |
agNewCfgSyslogTrapUfdEnable or disable UFD related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.47 |
agCurCfgSyslogTrapUfdEnable or disable UFD related syslog and SNMP trap,
as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.48 |
agNewCfgSyslogTrapCfgEnable or disable CFG related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.49 |
agCurCfgSyslogTrapCfgEnable or disable CFG related syslog and SNMP trap,
as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.50 |
agNewCfgSyslogTrap8021xEnable or disable 802.1 related syslog and SNMP trap, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.51 |
agCurCfgSyslogTrap8021xEnable or disable 802.1 related syslog and SNMP trap, in the
new_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.52 |
agNewCfgSyslogTrapAllEnable or disable all syslog and SNMP traps, in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.55 |
agCurCfgSyslogTrapAllEnable or disable all syslog and SNMP traps, as currently
configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.12.56 |
agCurCfgSyslogSevThe severity of syslog host in the current configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.13 |
agNewCfgSyslogSevThe severity of syslog host in the new configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.14 |
agCurCfgSyslog2SevThe severity of syslog2 host in the current configuration block.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.15 |
agNewCfgSyslog2SevThe severity of syslogs host in the new configuration block.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.5.16 |
agTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7 |
agTransferServerThe FTP/TFTP server IP address or domain name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.1 |
agTransferImageWhether the image file should be loaded in image1 or image2 or
boot in flash.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.2 |
agTransferImageFileNameThe image file name to be downloaded.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.3 |
agTransferCfgFileNameThe configuration file name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.4 |
agTransferDumpFileNameThe core dump file name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.5 |
agTransferActionThis is an action object to perform various FTP/TFTP Get or Put functions.
The FTP/TFTP sever is specified in agTransferServer object.
img-get(2) - Download switch image from a specified image
file(agTransferImageFileName) on the FTP/TFTP server to
the destinated storage(agTransferImage).
cfg-get(3) - Download switch configuration from a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file(agTransferCfgFileName) on the FTP/TFTP server.
dump-put(5)- Download switch core dump to a specified
file(agTransferDumpFileName) on the FTP/TFTP server.
img-put(7) - Upload specified switch image to a specified image
file(agTransferImageFileName) on the FTP/TFTP server.
tsdump-put(5)- Download switch core dump to a specified
file (agTransferTSDumpFileName) on the FTP/TFTP server.
other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.6 |
agTransferLastActionStatusThe recorded status of the previous FTP/TFTP activity.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.7 |
agTransferUserNameThe username for FTP server or blank for TFTP server.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.9 |
agTransferPasswordThe password for FTP server.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.10 |
agTransferTSDumpFileNameThe TS dump file name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.11 |
agTransferLastConfigurationActionStatusThe status of the last configuration action using the file ftp/tftp'd
from the server.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.7.14 |
agApply OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8 |
agApplyPendingThis object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.1 |
agApplyConfigWhen this object is read the current state is returned.
idle(3) indicates that there is no apply in progess.
complete(5) indicates that the last apply operation is completed.
Setting the value to apply(1), will write all the changes made
since the last apply to the current configuration block.
If the apply is successful this variable will return the state
'complete' else it will return 'failed'. In case of failure,
to read the reason for failure use the agApplyTable.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.2 |
agApplyTableSizeThe number of strings in the apply table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.4 |
agApplyTableThe table of URL path for URL load balancing in the current_config. SEQUENCE OF AgApplyTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5 |
agApplyTableEntryInformation about an URL path for URL load balancing. AgApplyTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1 |
agApplyIndexThe table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1.1 |
agApplyStringA string in the apply table.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.8.5.1.2 |
agTacacsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10 |
tacCurCfgPrimaryIpAddrThe IP address of the Primary TACACS+ server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.1 |
tacNewCfgPrimaryIpAddrThe IP address of the Primary TACACS+ server.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.2 |
tacCurCfgSecondaryIpAddrThe IP address of the Secondary TACSACS server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.3 |
tacNewCfgSecondaryIpAddrThe IP address of the Secondary TACACS+ server.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.4 |
tacCurCfgPortSpecify the TACACS+ port number.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.5 |
tacNewCfgPortSpecify the TACACS+ port number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.6 |
tacCurCfgTimeoutThe maximum number of seconds before resending authentication
to TACACS+ server.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.7 |
tacNewCfgTimeoutThe maximum number of seconds before resending authentication
to TACACS+ server.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.8 |
tacCurCfgRetriesNumber of retries to the TACACS+ server.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.9 |
tacNewCfgRetriesNumber of retries to the TACACS+ server.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.10 |
tacCurCfgStateEnable or disable TACACS+ authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.11 |
tacNewCfgStateEnable or disable TACACS+ authentication.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.12 |
tacCurCfgAuthenStringThe TACACS+ authentication string.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.13 |
tacNewCfgAuthenStringThe TACACS+ authentication string.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.14 |
tacCurCfgBackdoorEnable or disable TACACS+ backdoor for telnet/ssh/http/https.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.15 |
tacNewCfgBackdoorEnable or disable TACACS+ backdoor for telnet/ssh/http/https.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.16 |
tacCurCfgAuthenSecondStringThe second TACACS+ authentication string.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.17 |
tacNewCfgAuthenSecondStringThe second TACACS+ authentication string.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.18 |
tacCurCfgCmdAuthorEnable or disable TACACS+ command authorization.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.19 |
tacNewCfgCmdAuthorEnable or disable TACACS+ command authorization.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.20 |
tacCurCfgCmdLoggingEnable or disable TACACS+ command logging.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.21 |
tacNewCfgCmdLoggingEnable or disable TACACS+ command logging.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.22 |
tacCurCfgSecBdEnable or disable TACACS+ secure backdoor for telnet.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.23 |
tacNewCfgSecBdEnable or disable TACACS+ secure backdoor for telnet.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.24 |
tacCurCfgCmapEnable/Disable Tacacs+ new prividlege level maping.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.25 |
tacNewCfgCmapEnable/Disable Tacacs+ new prividlege level maping.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.26 |
agTacacsUserMapCurCfgTableThe table of tacacs+ user map current configuration. SEQUENCE OF AgTacacsUserMapCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31 |
agTacacsUserMapCurCfgTableEntryA row in the tacacs+ user mapping table. AgTacacsUserMapCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1 |
agTacacsUserMapCurCfgUIdThe current config remote privilege identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1.1 |
agTacacsUserMapCurCfgMappingCurrent Tacacs+ user privilege mappings.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.31.1.2 |
agTacacsUserMapNewCfgTableThe table of tacacs+ user map new configuration. SEQUENCE OF AgTacacsUserMapNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32 |
agTacacsUserMapNewCfgTableEntryA row in the tacacs+ user mapping table. AgTacacsUserMapNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1 |
agTacacsUserMapNewCfgUIdThe new config remote privilege identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1.1 |
agTacacsUserMapNewCfgMappingSet new Tacacs+ user privilege mappings.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.10.32.1.2 |
agMgmtNetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11 |
agMgmtNetTableMaxSizeThe maximum number of entries in the Management
Network Table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.1 |
agCurCfgMgmtNetTableThe table for Management Network definitions
in the current configuration block. SEQUENCE OF AgCurCfgMgmtNetEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2 |
agCurCfgMgmtNetEntryA row in the management network definition table. AgCurCfgMgmtNetEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1 |
agCurCfgMgmtNetIndexThe index of the Management Network Definition table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.1 |
agCurCfgMgmtNetSubnetThe Management Network Address in the current_configuration
block.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.2 |
agCurCfgMgmtNetMaskThe Management Network Mask in the current_configuration
block.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.2.1.3 |
agNewCfgMgmtNetTableThe table for Management Network definitions
in the new configuration block. SEQUENCE OF AgNewCfgMgmtNetEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3 |
agNewCfgMgmtNetEntryA row in the management network definition table. AgNewCfgMgmtNetEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1 |
agNewCfgMgmtNetIndexThe index of the Management Network Definition table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.1 |
agNewCfgMgmtNetSubnetThe Management Network Address in the new_configuration
block.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.2 |
agNewCfgMgmtNetMaskThe Management Network Mask in the new_configuration
block.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.3 |
agNewCfgMgmtNetDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.3.1.4 |
agMgmtNetClearBy setting the value to delete(2), the entire table is cleared.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.11.4 |
agAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12 |
agAccessUserMaxUserIDThe maximum number of Users ID.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.1 |
agAccessUserCurCfgTableThe table of Access user configuration. SEQUENCE OF AgAccessUserCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2 |
agAccessUserCurCfgTableEntryA row in the Access user configuration table. AgAccessUserCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1 |
agAccessUserCurCfgUIdThe User identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.1 |
agAccessUserCurCosThe user class of service.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.2 |
agAccessUserCurCfgNameThe user name.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.3 |
agAccessUserCurCfgPswdThe character string representing the user passworde.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.4 |
agAccessUserCurCfgStateEnable or disable a user.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.2.1.5 |
agAccessUserNewCfgTableThe table of Access user configuration. SEQUENCE OF AgAccessUserNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3 |
agAccessUserNewCfgTableEntryA row in the Access user configuration table. AgAccessUserNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1 |
agAccessUserNewCfgUIdThe User identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.1 |
agAccessUserNewCosThe user class of service.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.2 |
agAccessUserNewCfgNameThe user name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.3 |
agAccessUserNewCfgPswdThe character string representing the user passworde.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.4 |
agAccessUserNewCfgStateEnable or disable a user.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.5 |
agAccessUserNewCfgDeleteThis is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a Userrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.12.3.1.6 |
agSSHConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13 |
sshCurCfgIntrvalInterval for generating the RSA server key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.1 |
sshNewCfgIntrvalSet Interval for generating the RSA server key.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.2 |
sshCurCfgScpAdmSCP-only admin password.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.3 |
sshNewCfgScpAdmSet SCP-only admin password.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.4 |
sshNewCfgHKeyGenThis is an action object to generate the RSA host key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA host key.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.5 |
sshNewCfgSKeyGenThis is an action object to generate the RSA server key.
other(2) is returned always when read.
The following values are writable: generate(1).. Generate the RSA server key.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.6 |
sshCurCfgSSHPortSSH server port number.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.7 |
sshNewCfgSSHPortSet SSH server port number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.8 |
sshCurCfgScpApplySaveSCP apply and save.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.9 |
sshNewCfgScpApplySaveEnable/Disable the SCP apply and save.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.10 |
sshCurCfgStatusSSH server status.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.11 |
sshNewCfgStatusTurn SSH server ON/OFF.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.1.13.12 |
agentStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2 |
pktStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1 |
pktStatsAllocsTotal number of packet allocations from the packet buffer pool by
the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.1 |
pktStatsFreesTotal number of times the packet buffers are freed(released) to the
packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.2 |
pktStatsAllocFailsTotal number of packet allocation failures from the packet buffer
pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.3 |
pktStatsMediumsTotal number of packet allocations with size greater than 128 bytes
and less than or equal to 1536 bytes from the packet buffer pool by
the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.4 |
pktStatsJumbosTotal number of packet allocations with size larger than 1536 bytes
from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.5 |
pktStatsSmallsTotal number of packet allocations with size less than or eqaul to
128 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.6 |
pktStatsMediumsHiWatermarkThe highest number of packet allocations with size greater than
128 bytes and less than or equal to 1536 bytes from the packet
buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.7 |
pktStatsJumbosHiWatermarkThe highest number of packet allocations with size larger than
1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.8 |
pktStatsSmallsHiWatermarkThe highest number of packet allocations with size less than or
eqaul to 128 bytes from the packet buffer pool by the TCP/IP
protocol stack.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.1.9 |
mpCpuStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2 |
mpCpuStatsUtil1SecondThe utilization of MP CPU over 1 second. It shows the percentage.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2.1 |
mpCpuStatsUtil4SecondsThe utilization of MP CPU over 4 seconds.
It shows the percentage.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2.2 |
mpCpuStatsUtil64SecondsThe utilization of MP CPU over 64 seconds.
It shows the percentage.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.2.3 |
portStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3 |
portStatsTableThe table of port statistics. SEQUENCE OF PortStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1 |
portStatsTableEntryA row in the port stats table. PortStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1 |
portStatsIndxThe port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.1 |
portStatsPhyIfInOctetsThe total number of octets received on the
interface, including framing characters.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.2 |
portStatsPhyIfInUcastPktsThe number of subnetwork-unicast packets
delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.3 |
portStatsPhyIfInNUcastPktsThe number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.4 |
portStatsPhyIfInDiscardsThe number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up
buffer space.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.5 |
portStatsPhyIfInErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.6 |
portStatsPhyIfInUnknownProtosThe number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.7 |
portStatsPhyIfOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.8 |
portStatsPhyIfOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.9 |
portStatsPhyIfOutNUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.10 |
portStatsPhyIfOutDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer space.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.11 |
portStatsPhyIfOutErrorsThe number of outbound packets that could not be
transmitted because of errors.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.12 |
portStatsPhyIfOutQLenThe length of the output packet queue (in
packets).ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.13 |
portStatsPhyIfInBroadcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.14 |
portStatsPhyIfOutBroadcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.15 |
portStatsClearSetting this value to clear(1) clears the stats for this port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.16 |
portStatsPhyIfInMulticastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.17 |
portStatsPhyIfOutMulticastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.1.1.18 |
dot1xPortStatsTableThe table of 802.1x port statistics. SEQUENCE OF Dot1xPortStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2 |
dot1xPortStatsTableEntryA row in the 802.1x port stats table. Dot1xPortStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1 |
dot1xPortStatsIndxThe 802.1x port stats index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.1 |
eapolFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.2 |
eapolFramesTxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.3 |
eapolStartFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.4 |
eapolLogoffFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.5 |
eapolRespIdFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.6 |
eapolRespFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.7 |
eapolReqIdFramesTxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.8 |
eapolReqFramesTxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.9 |
invalidEapolFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.10 |
eapLengthErrorFramesRxro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.11 |
authEntersConnectingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.12 |
authEapLogoffsWhileConnectingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.13 |
authEntersAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.14 |
authSuccessesWhileAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.15 |
authTimeoutsWhileAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.16 |
authFailWhileAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.17 |
authReauthsWhileAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.18 |
authEapStartsWhileAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.19 |
authEapLogoffWhileAuthenticatingro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.20 |
authReauthsWhileAuthenticatedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.21 |
authEapStartsWhileAuthenticatedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.22 |
authEapLogoffWhileAuthenticatedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.23 |
backendResponsesro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.24 |
backendAccessChallengesro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.25 |
backendOtherRequestsToSupplicantro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.26 |
backendNonNakResponsesFromSupplicantro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.27 |
backendAuthSuccessesro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.28 |
backendAuthFailsro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.29 |
lastEapolFrameVersionro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.30 |
lastEapolFrameSourcero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.2.1.31 |
allportsStatsTableThe table of all ports statistics. SEQUENCE OF AllportsStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3 |
allportsStatsTableEntryA row in the table of all ports statistics. AllportsStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1 |
allportsStatsIndxThe port number.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.1 |
allportsStatsDescrThe port description.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.2 |
allportsStatsSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.3 |
allportsStatsPhysAddressThe port MAC Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.4 |
allportsStatsAdminStatusThe port Admin state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.5 |
allportsStatsOperStatusThe port Operational Status.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.6 |
allportsStatsInOctetsOctets In for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.7 |
allportsStatsOutOctetsOctets Out for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.8 |
allportsStatsInPktsPackets In for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.9 |
allportsStatsOutPktsPackets Out for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.10 |
allportsStatsInUcastUnicast Packets In for port.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.11 |
allportsStatsOutUcastUnicast Packets Out for port.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.12 |
allportsStatsInBcastBroadcasts Packets In for port.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.13 |
allportsStatsOutBcastBroadcasts Packets Out for port.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.14 |
allportsStatsInMcastMulticast Packets In for port.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.15 |
allportsStatsOutMcastMulticast Packets Out for port.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.16 |
allportsStatsInDiscardsDiscarded Packets for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.17 |
allportsStatsOutDiscardsOutbound Packets for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.18 |
allportsStatsInErrorsError Packets for port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.19 |
allportsStatsOutErrorsNot sent packets due to error.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.20 |
allportsStatsInUnknownProtosUnknown protocol packets.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.21 |
allportsStatsOutQLenOutbound Packet Queue Length.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.22 |
allportsStatsipInReceivesIp In Receives.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.23 |
allportsStatsipInHeaderErrorsIp In Header Errors.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.24 |
allportsStatsipInDiscardsIp In Discards.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.25 |
allportsStatsLinkStateChangeNumber of link state changes.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.3.1.26 |
clearPortsStatsSetting this to clear(2) results in clearing the statistics for all ports.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.3.4 |
agClearStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.7 |
snmpClearStatsSetting this to clear(2) results in clearing the SNMP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.7.1 |
ntpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9 |
ntpPrimaryServerReqSentThe total number of NTP requests sent to Primary NTP Server.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.1 |
ntpPrimaryServerRespRcvdThe total number of NTP responces received from Primary NTP Server.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.2 |
ntpPrimaryServerUpdatesThe total number of NTP Updates by Primary NTP Server.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.3 |
ntpSecondaryServerReqSentThe total number of NTP requests sent to Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.4 |
ntpSecondaryServerRespRcvdThe total number of NTP responces received from Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.5 |
ntpSecondaryServerUpdatesThe total number of NTP Updates by Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.6 |
ntpLastUpdateServerThe type of ntp server updated last time.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.7 |
ntpLastUpdateTimeThe last time updated by ntp server.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.8 |
ntpClearStatsSetting this value to clear(2) clears the stats for ntp.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.9 |
ntpSystemCurrentTimeThe current system time.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.9.10 |
aclStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12 |
aclStatsTableThe table of ACL statistics. SEQUENCE OF AclStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1 |
aclStatsTableEntryStatistics about a particular ACL configuration entry. AclStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1 |
aclStatsIndexThe acl index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.1 |
aclStatsHitsTotal number of hits for this ACL entryro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.2 |
aclClearStatsSetting this value to clear(2) clears the stats for the ACL.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.2.12.1.1.3 |
agentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3 |
hardware OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1 |
hwPartNumberThe hardware part number of the Bladetype2 Switch.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1.1 |
hwRevisionThe hardware revision. If the revision is not
available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1.2 |
hwSerialNumberThe switch serial number.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.1.5 |
portInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2 |
portInfoTableThe table of port information. SEQUENCE OF PortInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1 |
portInfoTableEntryA row in the port information table. PortInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1 |
portInfoIndxThe port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.1 |
portInfoSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.2 |
portInfoModeThe current operational mode of the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.3 |
portInfoFlowCtrlThe current operational flow control of the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.4 |
portInfoLinkThe current operational link status of the port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.5 |
portInfoPhyIfDescrA textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.6 |
portInfoPhyIfTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.7 |
portInfoPhyIfMtuThe size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that can be sent
on the interface.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.8 |
portInfoPhyIfPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.9 |
portInfoPhyIfOperStatusThe current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.10 |
portInfoPhyIfLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero
value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.2.1.1.11 |
agDiff OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4 |
agDiffStateWhen this object is read the current state is returned.
idle(3) indicates that there is no diff in progess.
complete(5) indicates that the last diff operation is completed.
Setting the value to diff(1), will start a new diff operation
Diff compares the new configuration with the current configuration
and shows the pending configuration changes.
Setting the value to flashdiff(1), will start a new diff operation.
flashdiff compares new configuration with the flash configuration.
To read the configuration changes use the agDiffTable once the
state of this variable returns complete.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.2 |
agDiffTableSizeThe number of strings in the diff table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.3 |
agDiffTableThe table of URL path for URL load balancing in the current_config. SEQUENCE OF AgDiffTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4 |
agDiffTableEntryInformation about an URL path for URL load balancing. AgDiffTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1 |
agDiffIndexThe table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1.1 |
agDiffStringA string in the diff table.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.4.4.1.2 |
agCfgDump OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5 |
agCfgDumpStateWhen this object is read the current state is returned.
idle(2) indicates that there is no dump in progess.
complete(4) indicates that the last dump operation is completed.
Setting the value to dump(1), will start a new dump operation
Dump will show the current configuration.
To read the configuration dump use the agCfgDumpTable once the
state of this variable returns complete.
Once the agCfgDumpTable is read the state should be set back to
'idle' which frees the dump buffer and others can issue a dump
command via SNMP.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.2 |
agCfgDumpTableSizeThe number of strings in the dump table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.3 |
agCfgDumpTableThe table of dump strings. SEQUENCE OF AgCfgDumpTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4 |
agCfgDumpTableEntryAn entry in the dump table. AgCfgDumpTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1 |
agCfgDumpIndexThe table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1.1 |
agCfgDumpStringA string in the dump table.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.5.4.1.2 |
geaportInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7 |
geaportInfoTableThe table of gea port mapping. SEQUENCE OF GeaportInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1 |
geaportInfoTableEntryAn entry in the geaport table mapping. GeaportInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1 |
geaportInfoLogicalIndexThe logical port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.1 |
geaportInfoPortThe GEA Port (0-based).ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.2 |
geaportInfoUnitThe GEA Unit.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.7.1.1.3 |
ufdInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8 |
ufdInfoStateUplink Failure Detection State.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.1 |
ufdInfoLtMStatusLtM Status.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.2 |
ufdInfoLtMPortsThe LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtM.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.3 |
ufdInfoLtMTrunksThe LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtM.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.4 |
ufdInfoLtMAdminkeyThe LtM admin key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.5 |
ufdInfoLtDStatusLtD status.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.6 |
ufdInfoLtDPortsThe LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtD.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.7 |
ufdInfoLtDTrunksThe LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtD.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.8 |
ufdInfoLtDAdminkeyMaxEntThe maximum number of rows in the LtD admin key configuration table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.9 |
ufdInfoLtDAdminkeyTableThe table of LtD admin key configuration. SEQUENCE OF UfdInfoLtDAdminkeyTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10 |
ufdInfoLtDAdminkeyTableEntryA row in the LtD admin key table. UfdInfoLtDAdminkeyTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10.1 |
ufdInfoLtDAdminkeyThe LtD admin key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.8.10.1.1 |
sfpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9 |
sfpInfoTableThe table of external port SFP information. SEQUENCE OF SfpInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1 |
sfpInfoTableEntryA row in the external port SFP information table. SfpInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1 |
sfpInfoIndxThe external port SFX index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.1 |
sfpInfoPortExternal Port SFP/XFP alias.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.2 |
sfpInfoDeviceExternal Port SFP/XFP Device.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.3 |
sfpInfoTXEnableExternal Port SFP/XFP TX-Enable.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.4 |
sfpInfoRXSignalExternal Port SFP/XFP RX-Signal.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.5 |
sfpInfoTXFaultExternal Port SFP/XFP TX-Fault.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.6 |
sfpInfoApprovedExternal Port SFP/XFP Approval.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.3.9.1.1.7 |
agentOper OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4 |
agPortOperTableThe table of port operations. SEQUENCE OF AgPortOperTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1 |
agPortOperTableEntryA row in the port operations table. AgPortOperTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1 |
portOperIdxThe port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.1 |
portOperStateEnable/Disable port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.2 |
portOperRmonEnable/Disable RMON for port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.1.1.3 |
agNTPOper OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.2 |
ntpOperSendReqAllows the user to send requests to the NTP server.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.2.1 |
portOperDot1xTableThe table of port operations. SEQUENCE OF PortOperDot1xTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3 |
portOperDot1xTableEntryA row in the port 802.1x operation table. PortOperDot1xTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1 |
portOperDot1xIndxThe port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.1 |
portOperDot1xResetReinitialize 802.1x access control on port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.2 |
portOperDot1xReauthInitiate reauthentication on port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.1.4.3.1.3 |
layer2 OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2 |
layer2Configs OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1 |
vlanMaxEntThe maximum number of rows in the VLAN configuration table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.1 |
vlanCurCfgTableThe table of VLAN configuration. SEQUENCE OF VlanCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2 |
vlanCurCfgTableEntryA row in the VLAN configuration table. VlanCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1 |
vlanCurCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.1 |
vlanCurCfgVlanNameThe VLAN name.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.2 |
vlanCurCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.3 |
vlanCurCfgStateEnable or disable a VLANro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.4 |
vlanCurCfgStgThe Spanning Tree Group for the VLAN.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.2.1.6 |
vlanNewCfgTableThe table of VLAN configuration. SEQUENCE OF VlanNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3 |
vlanNewCfgTableEntryA row in the VLAN configuration table. VlanNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1 |
vlanNewCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.1 |
vlanNewCfgVlanNameThe VLAN name.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.2 |
vlanNewCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.3 |
vlanNewCfgStateEnable or disable a VLANrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.4 |
vlanNewCfgAddPortThe port to be added to the specified VLAN. A '0' value is
returned when read.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.5 |
vlanNewCfgRemovePortThe port to be removed from the specified VLAN. A '0'
value is returned when read.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.6 |
vlanNewCfgDeleteThis is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLANrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.7 |
vlanNewCfgStgThe Spanning Tree Group for the VLAN.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.1.3.1.9 |
trunkgroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2 |
trunkGroupTableMaxSizeThe maximum number of entries in trunk group table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.1 |
trunkGroupCurCfgTableThe table of trunk group configuration. SEQUENCE OF TrunkGroupCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2 |
trunkGroupCurCfgTableEntryA row in the trunk group configuration table. TrunkGroupCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1 |
trunkGroupCurCfgIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.1 |
trunkGroupCurCfgPortsThe port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.2 |
trunkGroupCurCfgStateEnable or disable a trunk group.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.2.1.3 |
trunkGroupNewCfgTableThe table of trunk group configuration. SEQUENCE OF TrunkGroupNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3 |
trunkGroupNewCfgTableEntryA row in the trunk group configuration table. TrunkGroupNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1 |
trunkGroupNewCfgIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.1 |
trunkGroupNewCfgPortsThe port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.2 |
trunkGroupNewCfgAddPortThe port to be added in the trunk group. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.3 |
trunkGroupNewCfgRemovePortThe port to be deleted from the trunk group. when read, 0
is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.4 |
trunkGroupNewCfgStateEnable or disable a trunk group.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.5 |
trunkGroupNewCfgDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.2.3.1.6 |
stgCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3 |
stgCurCfgTableThe table of Spanning Tree Group configuration. SEQUENCE OF StgCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1 |
stgCurCfgTableEntryInformation about a particular Spanning Tree Group configuration. StgCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1 |
stgCurCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.1 |
stgCurCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.2 |
stgCurCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.5 |
stgCurCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.6 |
stgCurCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.7 |
stgCurCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.8 |
stgCurCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.1.1.10 |
stgNewCfgTableThe table of Spanning Tree Groups configuration in the new_config. SEQUENCE OF StgNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2 |
stgNewCfgTableEntryInformation about a particular Spanning Tree Group configuration. StgNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1 |
stgNewCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.1 |
stgNewCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.2 |
stgNewCfgDefaultCfgSetting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.3 |
stgNewCfgAddVlanThe vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.4 |
stgNewCfgRemoveVlanThe vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.5 |
stgNewCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.8 |
stgNewCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.9 |
stgNewCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.10 |
stgNewCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.11 |
stgNewCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.2.1.13 |
stgCurCfgPortTableThe table of Spanning Tree Group port configuration in the
current_config. SEQUENCE OF StgCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3 |
stgCurCfgPortTableEntryInformation about port configuration of a particular Spanning Tree
Group. StgCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1 |
stgCurCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.1 |
stgCurCfgPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.2 |
stgCurCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.3 |
stgCurCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.4 |
stgCurCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.5 |
stgCurCfgPortLinkThe type of the port link.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.6 |
stgCurCfgPortEdgeThe state of port edge.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.7 |
stgCurCfgPortFastFwdThe state of port fast forwarding.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.3.1.8 |
stgNewCfgPortTableThe table of Spanning Tree Group port configuration in the
new_config. SEQUENCE OF StgNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4 |
stgNewCfgPortTableEntryInformation about port configuration of a particular Spanning Tree
Group. StgNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1 |
stgNewCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.1 |
stgNewCfgPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.2 |
stgNewCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.3 |
stgNewCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.4 |
stgNewCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.5 |
stgNewCfgPortLinkThe type of the port link.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.6 |
stgNewCfgPortEdgeThe state of port edge.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.7 |
stgNewCfgPortFastFwdThe state of port fast forwarding.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.3.4.1.8 |
mirroring OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4 |
mirrPortMirr OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1 |
pmCurCfgPortMirrStateThe state of port-based port mirroring.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.1 |
pmNewCfgPortMirrStateThe state of port-based port mirroring.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.2 |
pmCurCfgPortMonitorTableThe table of monitoring ports. SEQUENCE OF PmCurCfgPortMonitorEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3 |
pmCurCfgPortMonitorEntryA row in the monitoring port table. PmCurCfgPortMonitorEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1 |
pmCurCfgPmirrMoniPortIndexThe monitoring port number.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.1 |
pmCurCfgPmirrMirrPortIndexThe mirrored port numberro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.2 |
pmCurCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.3.1.3 |
pmNewCfgPortMonitorTableThe table of monitoring ports. SEQUENCE OF PmNewCfgPortMonitorEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4 |
pmNewCfgPortMonitorEntryA row in the monitoring port table. PmNewCfgPortMonitorEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1 |
pmNewCfgPmirrMoniPortIndexThe monitoring port number.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.1 |
pmNewCfgPmirrMirrPortIndexThe mirrored port numberro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.2 |
pmNewCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.3 |
pmNewCfgPmirrDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.4 |
pmNewCfgPmonDeleteSetting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.4.1.4.1.10 |
mstCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5 |
mstGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1 |
mstCurCfgStateEnable or disable MSTP/RSTPro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.1 |
mstNewCfgStateEnable or disable MSTP/RSTPrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.2 |
mstCurCfgRegionNameThe Name for the Region's configuration.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.3 |
mstNewCfgRegionNameThe Name for the Region's configuration.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.4 |
mstCurCfgRegionVersionVersion of the MST Region.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.5 |
mstNewCfgRegionVersionVersion of the MST Region.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.6 |
mstCurCfgMaxHopCountIndicates the maximum hop count value.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.7 |
mstNewCfgMaxHopCountIndicates the maximum hop count value.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.8 |
mstCurCfgStpModeThe version of Spanning Tree Protocal the bridge is currently
running.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.9 |
mstNewCfgStpModeThe version of Spanning Tree Protocal the bridge is currently
running.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.1.10 |
mstCistCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2 |
mstCistDefaultCfgSetting the value to default(1) will set the Multiple
Spanning Tree and member parameters to default. default(1) is
always returned when read, but it does not mean anything.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.1 |
mstCistBridgeCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2 |
mstCistCurCfgBridgePriorityThe value of the writable portion of the Brigde Identifier comprising
of the first two octets.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.1 |
mstCistNewCfgBridgePriorityThe value of the writable portion of the Brigde Identifier comprising
of the first two octets.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.2 |
mstCistCurCfgBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.5 |
mstCistNewCfgBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.6 |
mstCistCurCfgBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.7 |
mstCistNewCfgBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.8 |
mstCistCurCfgVlanBmapThe vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the groupro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.9 |
mstCistNewCfgVlanBmapThe vlans applied to the CIST group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4094.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1
where x : 1 - The represented vlan applied to the CIST group.
0 - The represented vlan not applied to the groupro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.10 |
mstCistNewCfgAddVlanThe vlan to be added to the CIST Group. A
'0' value is returned when read.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.2.11 |
mstCistCurCfgPortTableThe table of CIST Port configuration. SEQUENCE OF MstCistCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3 |
mstCistCurCfgPortTableEntryInformation about a particular CIST Port configuration. MstCistCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1 |
mstCistCurCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.1 |
mstCistCurCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.2 |
mstCistCurCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.3 |
mstCistCurCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.4 |
mstCistCurCfgPortEdgeThe value of the Edge Port parameter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.5 |
mstCistCurCfgPortStpStateTurn port's Spanning Tree on/off.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.6 |
mstCistCurCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.3.1.7 |
mstCistNewCfgPortTableThe table of CIST Port configuration. SEQUENCE OF MstCistNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4 |
mstCistNewCfgPortTableEntryInformation about a particular CIST Port configuration. MstCistNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1 |
mstCistNewCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.1 |
mstCistNewCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.2 |
mstCistNewCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.3 |
mstCistNewCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port should be treated as
having a shared media connection. A value of auto(1) indicates that
this port is considered to have a point-to-point link if it is an
Aggregator and all of its members are aggregatable, or if the MAC
entity is configured for full duplex operation, either through
auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.4 |
mstCistNewCfgPortEdgeThe value of the Edge Port parameter.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.5 |
mstCistNewCfgPortStpStateTurn port's Spanning Tree on/off.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.6 |
mstCistNewCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.5.2.4.1.7 |
lacp OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6 |
lacpCurSystemPriorityA 2-octet read-write value indicating the priority
value associated with the Actor's System ID.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.1 |
lacpNewSystemPriorityA 2-octet read-write value indicating the priority
value associated with the Actor's System ID.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.2 |
lacpCurSystemTimeoutTimeIf a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3).ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.5 |
lacpNewSystemTimeoutTimeIf a port does not receive LACPDUs for Timeout time LACP
information pertaining to the port is invalidated.
Its every 3 sec (short) and every 90 sec (long 3).rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.6 |
lacpCurPortCfgTableThe table of LACP port configuration. SEQUENCE OF LacpCurPortCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7 |
lacpCurPortCfgTableEntryA row in the LACP port configuration table. LacpCurPortCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1 |
lacpCurPortCfgTableIdLACP port number.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.1 |
lacpCurPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.2 |
lacpCurPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.3 |
lacpCurPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.7.1.4 |
lacpNewPortCfgTableThe table of LACP port configuration. SEQUENCE OF LacpNewPortCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8 |
lacpNewPortCfgTableEntryA row in the LACP port configuration table. LacpNewPortCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1 |
lacpNewPortCfgTableIdLACP port number.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.1 |
lacpNewPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.2 |
lacpNewPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-write.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.3 |
lacpNewPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.6.8.1.4 |
thash OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7 |
thashL2 OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1 |
l2ThashCurCfgSmacStateEnable or disable smac hash.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.1 |
l2ThashNewCfgSmacStateEnable or disable smac hash.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.2 |
l2ThashCurCfgDmacStateEnable or disable dmac hash.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.3 |
l2ThashNewCfgDmacStateEnable or disable dmac hash.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.4 |
l2ThashCurCfgSipStateEnable or disable sip hash.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.5 |
l2ThashNewCfgSipStateEnable or disable sip hash.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.6 |
l2ThashCurCfgDipStateEnable or disable dip hash.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.7 |
l2ThashNewCfgDipStateEnable or disable dip hash.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.7.1.8 |
l2GeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8 |
upfastCurCfgStateEnable or disable uplink fastro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.1 |
upfastNewCfgStateEnable or disable uplink fastrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.2 |
updateCurCfgStateUplinkFast station update rate: packets per secondro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.3 |
updateNewCfgStateUplinkFast station update rate: packets per secondrw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.4 |
pvstCompatibilityCurCfgStateEnable or disable PVST+ compatibilityro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.9 |
pvstCompatibilityNewCfgStateEnable or disable PVST+ compatibilityrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.8.10 |
ufd OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9 |
ufdGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1 |
ufdCurCfgStateEnable or disable UFD statero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.1 |
ufdNewCfgStateEnable or disable UFD staterw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.2 |
ufdCurCfgLtMPortsThe LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtMro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.3 |
ufdNewCfgLtMPortsThe LtM port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtM
0 - The represented port does not belong to LtMro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.4 |
ufdCurCfgLtMTrunksThe LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtMro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.5 |
ufdNewCfgLtMTrunksThe LtM trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtM
0 - The represented trunk does not belong to LtMrw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.6 |
ufdCurCfgLtMAdminkeyThe LtM admin key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.7 |
ufdNewCfgLtMAdminkeyThe LtM admin key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.8 |
ufdCurCfgLtDPortsThe LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtDro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.9 |
ufdNewCfgLtDPortsThe LtD port list. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to LtD
0 - The represented port does not belong to LtDro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.10 |
ufdCurCfgLtDTrunksThe LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtDro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.11 |
ufdNewCfgLtDTrunksThe LtD trunk list. The trunks are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ trunk 8
|| ||
|| ||___ trunk 7
|| |____ trunk 6
|| . . .
||_________ trunk 1
|__________ reserved
where x : 1 - The represented trunk belongs to LtD
0 - The represented trunk does not belong to LtDrw OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.12 |
ufdLtDAdminkeyMaxEntThe maximum number of rows in the LtD admin key configuration table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.13 |
ufdLtDAdminkeyCurCfgTableThe table of LtD admin key configuration. SEQUENCE OF UfdLtDAdminkeyCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14 |
ufdLtDAdminkeyCurCfgTableEntryA row in the LtD admin key table. UfdLtDAdminkeyCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14.1 |
ufdLtDAdminkeyCurCfgThe LtD admin key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.14.1.1 |
ufdLtDAdminkeyNewCfgTableThe table of LtD admin key configuration. SEQUENCE OF UfdLtDAdminkeyNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15 |
ufdLtDAdminkeyNewCfgTableEntryA row in the LtD admin key table. UfdLtDAdminkeyNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15.1 |
ufdLtDAdminkeyNewCfgThe LtD admin key.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.15.1.1 |
ufdNewCfgAddLtMPortThe port to be added to LtM. A '0' value is
returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.16 |
ufdNewCfgRemoveLtMPortThe port to be removed from LtM. A '0'
value is returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.17 |
ufdNewCfgAddLtMTrunkThe trunk to be added to LtM. A '0' value is
returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.18 |
ufdNewCfgRemoveLtMTrunkThe trunk to be removed from LtM. A '0'
value is returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.19 |
ufdNewCfgAddLtMAdminkeyThe admin key to be added to LtM. A '0' value is
returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.20 |
ufdNewCfgRemoveLtMAdminkeyThe admin key to be removed from LtM. A '0'
value is returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.21 |
ufdNewCfgAddLtDPortThe port to be added to LtD. A '0' value is
returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.22 |
ufdNewCfgRemoveLtDPortThe port to be removed from LtM. A '0'
value is returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.23 |
ufdNewCfgAddLtDTrunkThe trunk to be added to LtM. A '0' value is
returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.24 |
ufdNewCfgRemoveLtDTrunkThe trunk to be removed from LtD. A '0'
value is returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.25 |
ufdNewCfgAddLtDAdminkeyThe admin key to be added to LtD. A '0' value is
returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.26 |
ufdNewCfgRemoveLtDAdminkeyThe admin key to be removed from LtD. A '0'
value is returned when read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.27 |
ufdCurCfgGlobalStateCurrent global Failover settings.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.28 |
ufdNewCfgGlobalStateNew global Failover settings.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.9.1.29 |
dot1x OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11 |
dot1xCurStatusDot1x statusro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.1 |
dot1xNewStatusDot1x statusrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.2 |
dot1xCurCfgPortTableThe table of 8021x configuration in the Current_config. SEQUENCE OF Dot1xCurCfgPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3 |
dot1xCurCfgPortEntryInformation about 8021x Port Config Dot1xCurCfgPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1 |
dot1xCurCfgPortIndexThe 8021x Port number for which the table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.1 |
dot1xCurCfgPortModePort authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.2 |
dot1xCurCfgPortQtPeriodQuiet period (0-65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.3 |
dot1xCurCfgPortTxPeriodTx Periodro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.4 |
dot1xCurCfgPortSupTmoutSupplicant timeout (1..65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.5 |
dot1xCurCfgPortSrvTmoutServer timeout (1..65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.6 |
dot1xCurCfgPortMaxRqMaximum numer of requests (1..10)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.7 |
dot1xCurCfgPortRaPeriodReautentication period (0..604800)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.8 |
dot1xCurCfgPortReAuthReAuthentication state
off(0),
on(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.3.1.9 |
dot1xNewCfgPortTableThe table of 8021x configuration in the new_config. SEQUENCE OF Dot1xNewCfgPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4 |
dot1xNewCfgPortEntryInformation about 8021x Port Config Dot1xNewCfgPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1 |
dot1xNewCfgPortIndexThe 8021x Port number for which the table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.1 |
dot1xNewCfgPortModePort authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.2 |
dot1xNewCfgPortQtPeriodQuiet period (0..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.3 |
dot1xNewCfgPortTxPeriodTx Period (1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.4 |
dot1xNewCfgPortSupTmoutSupplicant Timeout (1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.5 |
dot1xNewCfgPortSrvTmoutServer Timeout (1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.6 |
dot1xNewCfgPortMaxRqMaximum number of requests (1..10)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.7 |
dot1xNewCfgPortRaPeriodReauthentication period (1..604800)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.8 |
dot1xNewCfgPortReAuthReauthentication state
off(0),
on(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.9 |
dot1xNewCfgPortDefaultPort default settingsrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.10 |
dot1xNewCfgPortApplyGlobalApply Global configrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.4.1.11 |
dot1xCurCfgGlobalTable OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5 |
dot1xCurCfgGlobalModeAutehtication Mode
forceUnauth(0),
auto(1),
forceAuth(2)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.1 |
dot1xCurCfgGlobalQtPeriodQuiet period (0..65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.2 |
dot1xCurCfgGlobalTxPeriodTx period (1..65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.3 |
dot1xCurCfgGlobalSupTmoutSupplicant timeout (1..65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.4 |
dot1xCurCfgGlobalSrvTmoutServer timeout (1..65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.5 |
dot1xCurCfgGlobalMaxRqMaximum number of requests (1..10)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.6 |
dot1xCurCfgGlobalRaPeriodReauthentication period (0..604800)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.7 |
dot1xCurCfgGlobalReAuthro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.5.8 |
dot1xNewCfgGlobalTable OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6 |
dot1xNewCfgGlobalModeAuthentication Moderw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.1 |
dot1xNewCfgGlobalQtPeriodQuiet Period (0..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.2 |
dot1xNewCfgGlobalTxPeriodTx Period (1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.3 |
dot1xNewCfgGlobalSupTmoutSupplicand timeout (1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.4 |
dot1xNewCfgGlobalSrvTmoutServer timeout (1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.5 |
dot1xNewCfgGlobalMaxRqMaximum number of requests (1..10)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.6 |
dot1xNewCfgGlobalRaPeriodReauthentication period (1..604800)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.7 |
dot1xNewCfgGlobalReAuthReauthentication statusrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.11.6.8 |
fdb OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12 |
fdbGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.1 |
fdbCurCfgAgingTimeFdb current aging timero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.1.1 |
fdbNewCfgAgingTimeFdb new aging time.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.1.2 |
fdbNewCfgStaticTableThe table of FDB static entries. SEQUENCE OF FdbNewCfgStaticEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2 |
fdbNewCfgStaticEntryA row in the fdb table. FdbNewCfgStaticEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1 |
fdbNewCfgEntryIndexThe fdb entry indexro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.1 |
fdbNewCfgAddVlanAdd vlan for fdb entry indexrw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.2 |
fdbNewCfgAddPortThe MAC address port number.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.3 |
fdbNewCfgAddMacAdd a fdb entry.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.4 |
fdbNewCfgDelStaticEntryWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.2.1.5 |
fdbCurCfgStaticTableThe table of FDB static entries. SEQUENCE OF FdbCurCfgStaticEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3 |
fdbCurCfgStaticEntryA row in the fdb table. FdbCurCfgStaticEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1 |
fdbCurCfgEntryIndexThe fdb entry indexro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.1 |
fdbCurCfgVlanAdd vlan for fdb entry indexro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.2 |
fdbCurCfgPortThe MAC address port number.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.3 |
fdbCurCfgMacAdd a fdb entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.1.12.3.1.4 |
layer2Stats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2 |
fdbStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1 |
fdbStatsCurrentCurrent number of entries in the Forwarding Database.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1.3 |
fdbStatsHiwatHighest number of entries recorded at any given time in the
Forwarding Database.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1.4 |
fdbStatsClearClear FDB statisticsrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.1.11 |
stpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2 |
stgStatsPortTableThe table of Spanning Tree Group port statistics. SEQUENCE OF StgStatsPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1 |
stgStatsPortTableEntryStatistics about port of a particular Spanning Tree Group. StgStatsPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1 |
stgStatsStpIndexThe identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.1 |
stgStatsPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.2 |
stgStatsPortRcvCfgBpdusNumber of Configuration BPDU's received on this port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.3 |
stgStatsPortRcvTcnBpdusNumber of TCN BPDU's received on this port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.4 |
stgStatsPortXmtCfgBpdusNumber of Configuration BPDU's trasmitted from the port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.5 |
stgStatsPortXmtTcnBpdusNumber of TCN BPDU's trasmitted from the port.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.2.1.1.6 |
lacpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3 |
lacpStatsTableThe table of LACP Stats. SEQUENCE OF LacpStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1 |
lacpStatsTableEntryLacp status info. LacpStatsTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1 |
lacpStatsIndexIndexro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.1 |
lacpdusRxValid LACPDUs receivedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.2 |
markerpdusRxValid Marker PDUs receivedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.3 |
markerresponsepdusRxValid Marker Rsp PDUs receivedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.4 |
unknownRxUnknown version/TLV typero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.5 |
illegalRxIllegal subtype receivedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.6 |
lacpdusTxLACPDUs transmittedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.7 |
markerpdusTxMarket PDUs transmittedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.8 |
markerresponsepdusTxMarker Rsp PDUs transmittedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.9 |
lacpClearStatsSetting this to clear(2) results in clearing the LACP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.3.1.1.10 |
ufdStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4 |
ufdNoLtMLinkFailurero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.1 |
ufdNoLtMLinkBlockingStatero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.2 |
ufdNoLtDAutoDisabledro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.3 |
ufdClearStatsSetting this value to clear(2) clears the UFD stats.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.2.4.4 |
layer2Info OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3 |
cistInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1 |
cistGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1 |
cistRootThe bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.1 |
cistRootPathCostThe cost of the path to the CIST Root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.2 |
cistRootPortThe Port Number of the Port which offers the lowest path cost from
this bridge to the CIST Root Bridge.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.3 |
cistRootMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.5 |
cistRootForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.6 |
cistRegionalRootThe bridge identifier of the Root of the Multiple
spanning tree region as determined by the Spanning Tree
Protocol as executed by this node. This value is used as
the CIST Regional Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.7 |
cistRegionalPathCostThe Cost of the path to the CIST Regional Root as seen from this
bridge.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.8 |
cistBridgePriorityThe value of the writable portion of the Brigde Identifier comprising
of the first two octets.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.9 |
cistBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.10 |
cistBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.11 |
cistMaxHopCountIndicates the maximum hop count value.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.12 |
mstpDigestThe digest of the mstp.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.1.13 |
cistInfoPortTableThe table of CIST Port information. SEQUENCE OF CistInfoPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2 |
cistInfoPortTableEntryInformation about a particular CIST Port. CistInfoPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1 |
cistInfoPortIndexThe port number of the port for which this entry contains spanning
tree configuration.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.1 |
cistInfoPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.2 |
cistInfoPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.3 |
cistInfoPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.4 |
cistInfoPortRoleSelected Port Role of the port for this spanning tree instance.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.5 |
cistInfoPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.6 |
cistInfoPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.7 |
cistInfoPortLinkTypeThe point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that this port is being treated as
having a shared media connection.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.8 |
cistInfoPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.1.2.1.9 |
fdbInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2 |
fdbClearSetting this value to clear(2) clears the entire master FDB.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.1 |
fdbTableThe table of FDB entries. SEQUENCE OF FdbEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2 |
fdbEntryA row in the FDB table FdbEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1 |
fdbMacAddrThe MAC address for the FDB entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.1 |
fdbVlanThe VLAN ID for the FDB entry.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.2 |
fdbSrcPortEither the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not been learned but that the bridge does have some
forwarding/filtering information about this address.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.3 |
fdbStateThe state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address has been learned by the switch
trunk(3) : frames with this MAC address are forwarded to trunk
groupro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.4 |
fdbRefSpsThe referenced SPs associated with this FDB entry.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.5 |
fdbLearnedPortThe learned port associated with this FDB entry.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.6 |
fdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not associated with a trunk.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.7 |
fdbStatus'1' if it is permanent
'0' if it is not permanentro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.2.2.1.8 |
stpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3 |
stpInfoTableThe table of Spanning Tree Group information. SEQUENCE OF StpInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1 |
stpInfoTableEntryInformation about a particular Spanning Tree Group. StpInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1 |
stpInfoIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.1 |
stpInfoStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.2 |
stgInfoVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.3 |
stpInfoTimeSinceTopChangeThe time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.4 |
stpInfoTopChangesThe total number of topology changes detected by this bridge since
the management entity was last reset or initialized.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.5 |
stpInfoDesignatedRootThe bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.6 |
stpInfoRootCostThe cost of the path to the root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.7 |
stpInfoRootPortThe port number of the port which offers the lowest cost path from
this bridge to the root bridge.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.8 |
stpInfoMaxAgeThe maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.9 |
stpInfoHelloTimeThe amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual value that this bridge is currently using.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.10 |
stpInfoForwardDelayThis time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, which precede
the Forwarding state. This value is also used, when a topology
change has been detected and is underway, to age all dynamic entries
in the Forwarding Database.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.11 |
stpInfoHoldTimeThis time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.12 |
stpInfoBrgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.13 |
stpInfoBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.14 |
stpInfoBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.15 |
stpInfoBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.16 |
stpInfoAgingTimeThe timeout period in seconds for aging out dynamically learned
forwarding information.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.1.1.17 |
stpInfoPortTableThe table of Spanning Tree Group port information. SEQUENCE OF StpInfoPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2 |
stpInfoPortTableEntryInformation about port configuration for a particular Spanning Tree
Group. StpInfoPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1 |
stpInfoPortStpIndexThe identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.1 |
stpInfoPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.2 |
stpInfoPortStateThe port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it will place that port into the broken(6) state.
For ports which are disabled, this object will have a value of
disabled(1).ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.3 |
stpInfoPortDesignatedRootThe unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.4 |
stpInfoPortDesignatedCostThe path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.5 |
stpInfoPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.6 |
stpInfoPortDesignatedPortThe Port Identifier of the port on the Designated Bridge for this
port's segment.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.7 |
stpInfoPortForwardTransitionsThe number of times this port has transitioned from the Learning
state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.8 |
stpInfoPortPathCostThe path cost of the port.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.3.2.1.9 |
lacpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4 |
lacpInfoAggrTableThe table of LACP aggregator information. SEQUENCE OF LacpInfoAggrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1 |
lacpInfoAggrTableEntryInformation about a LACP aggregator. LacpInfoAggrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1 |
lacpInfoAggrIndexThe aggregator identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.1 |
lacpInfoAggrIdro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.2 |
lacpInfoAggrMacro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.3 |
lacpInfoAggrActSysPrioro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.4 |
lacpInfoAggrActSysIdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.5 |
lacpInfoAggrIndivStatero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.6 |
lacpInfoAggrActAdminKeyro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.7 |
lacpInfoAggrActOperKeyro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.8 |
lacpInfoAggrPartSysPrioro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.9 |
lacpInfoAggrPartSysIdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.10 |
lacpInfoAggrPartOperKeyro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.11 |
lacpInfoAggrReadyStatero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.12 |
lacpInfoAggrNumPortsro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.13 |
lacpInfoAggrPortsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.1.1.14 |
lacpInfoPort OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2 |
lacpInfoPortGeneralTableThe table of LACP port general information. SEQUENCE OF LacpInfoPortGeneralTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1 |
lacpInfoPortGeneralTableEntryGeneral information about a LACP port. LacpInfoPortGeneralTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1 |
lacpInfoPortGeneralIndexThe port identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.1 |
lacpInfoPortLacpEnaro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.2 |
lacpInfoPortAdminEnaro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.3 |
lacpInfoPortActSysIdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.4 |
lacpInfoPortActSysPrioro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.5 |
lacpInfoPortActAdminKeyro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.6 |
lacpInfoPortActOperKeyro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.7 |
lacpInfoPortActPortNumro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.8 |
lacpInfoPortActPortPrioro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.9 |
lacpInfoPortIndivStatero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.10 |
lacpInfoSelAggrIdro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.11 |
lacpInfoAttAggrIdro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.12 |
lacpInfoPortReadyNTrue value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.13 |
lacpInfoPortNttNeed to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.14 |
lacpInfoPortSelectedSelected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the selection logic has selected an appropriate Aggregator,
aggregation restrictions currently precent the port from being
enabled as part of the aggregation, and so the port is being held
in standby condition.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.15 |
lacpInfoPortMovedPort Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in an incoming LACPDU on a different port.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.16 |
lacpInfoCollDetStatero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.17 |
lacpInfoPortRxStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.18 |
lacpInfoPortMuxStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.19 |
lacpInfoPortPerStatero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.1.1.20 |
lacpInfoPortAdminTableThe table of LACP port admin information. SEQUENCE OF LacpInfoPortAdminTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2 |
lacpInfoPortAdminTableEntryAdmin information about a LACP port. LacpInfoPortAdminTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1 |
lacpInfoPortAdminIndexThe port identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.1 |
lacpInfoPortActAdPortStateThe state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.7 |
lacpInfoPortActAdActivro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.8 |
lacpInfoPortActAdSyncro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.9 |
lacpInfoPortActAdDefro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.10 |
lacpInfoPortActAdTimeoutro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.11 |
lacpInfoPortActAdCollro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.12 |
lacpInfoPortActAdExpro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.13 |
lacpInfoPortActAdAggrro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.14 |
lacpInfoPortActAdDistro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.2.1.15 |
lacpInfoPortOperTableThe table of LACP port oper information. SEQUENCE OF LacpInfoPortOperTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3 |
lacpInfoPortOperTableEntryOper information about a LACP port. LacpInfoPortOperTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1 |
lacpInfoPortOperIndexThe port identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.1 |
lacpInfoPortPartOpSysPrioro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.2 |
lacpInfoPortPartOpSysIdro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.3 |
lacpInfoPortPartOpKeyro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.4 |
lacpInfoPortPartOpPortNumro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.5 |
lacpInfoPortPartOpPortPrioro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.6 |
lacpInfoPortActOpPortStateThe state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.7 |
lacpInfoPortActOpActivro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.8 |
lacpInfoPortActOpSyncro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.9 |
lacpInfoPortActOpDefro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.10 |
lacpInfoPortActOpTimeoutro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.11 |
lacpInfoPortActOpCollro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.12 |
lacpInfoPortActOpExpro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.13 |
lacpInfoPortActOpAggrro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.14 |
lacpInfoPortActOpDistro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.15 |
lacpInfoPortPartOpPortStateThe state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is showed as 0x0, else it is
displayed a blank state which mean is not a NULL statero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.16 |
lacpInfoPortPartOpActivro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.17 |
lacpInfoPortPartOpSyncro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.18 |
lacpInfoPortPartOpDefro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.19 |
lacpInfoPortPartOpTimeoutro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.20 |
lacpInfoPortPartOpCollro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.21 |
lacpInfoPortPartOpExpro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.22 |
lacpInfoPortPartOpAggrro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.23 |
lacpInfoPortPartOpDistro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.4.2.3.1.24 |
dot1xInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5 |
dot1xInfoPortTableThe table of 8021x configuration in the Current_config. SEQUENCE OF Dot1xInfoPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1 |
dot1xInfoPortEntryInformation about 8021x Port Config Dot1xInfoPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1 |
dot1xInfoPortIndexThe 8021x Port number for which the table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.1 |
dot1xInfoPortAuthModeAuthentication modero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.2 |
dot1xInfoPortAuthStatusAuthentication statusro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.3 |
dot1xInfoPortCtrlDirControlled Directionsro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.4 |
dot1xInfoPortAuthPAEStateAuthenticator PAE Statero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.5 |
dot1xInfoPortBackAuthStateBackend authenticator PAE statero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.1.1.6 |
dot1xSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2 |
dot1xSystemCapabilitySystem capabilityro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2.1 |
dot1xSystemStatusSystem statusro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2.2 |
dot1xSystemProtoVersionProtocol versionro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.5.2.3 |
dot1pInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6 |
dot1pInfoPriorityCOSTableThe table of current priority to COS queue information. SEQUENCE OF Dot1pInfoPriorityCOSEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1 |
dot1pInfoPriorityCOSEntryCurrent information about 8021p priority to COS queue. Dot1pInfoPriorityCOSEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1 |
dot1pInfoPriorityIndexThe 8021p priority for which the table is related.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1.1 |
dot1pInfoPriorityCOSQueueThe 8021p priority COSq.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1.2 |
dot1pInfoPriorityCOSWeightThe 8021p priority weight.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.1.1.3 |
dot1pInfoPortTableThe table of 8021p port priority configuration
in the Current_config. SEQUENCE OF Dot1pInfoPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2 |
dot1pInfoPortEntryInformation about 8021p Port Priority Dot1pInfoPortEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1 |
dot1pInfoPortIndexThe 8021p Port number for which the table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.1 |
dot1pInfoPortPriorityThe 8021p Port number for which the table is related.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.2 |
dot1pInfoPortCOSqThe 8021p port COSq.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.3 |
dot1pInfoPortWeightThe 8021p port weight.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.6.2.1.4 |
genInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.7 |
generalInfoStpUplinkFastSTP uplink fast modero Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.7.1 |
generalInfoUplinkFastRateSTP fast uplink rate.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.7.2 |
vlanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8 |
vlanInfoTableThe table of VLAN information. SEQUENCE OF VlanInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1 |
vlanInfoTableEntryInformation about a particular VLAN. VlanInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1 |
vlanInfoIdThe VLAN identifier.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.1 |
vlanInfoNameThe VLAN name.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.2 |
vlanInfoStatusEnable or disable, VLAN state informationro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.3 |
vlanInfoPortsThe port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.8.1.1.4 |
trunkGroupInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9 |
trunkGroupInfoTableThe table of trunk group information. SEQUENCE OF TrunkGroupInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1 |
trunkGroupInfoTableEntryA row in trunk group information table. TrunkGroupInfoTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1 |
trunkGroupInfoIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.1 |
trunkGroupInfoStateTrunk group state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.2 |
trunkGroupInfoPortsThe port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.3 |
trunkGroupInfoProtocolTrunk group protocol
Static - static trunk group
Lacp - dynamic trunk groupro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.4 |
trunkGroupInfoStgsThe stg list the trunk group is in. The stgs are presented in
bitmap format.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.1.1.5 |
trunkGroupInfoPortTableThe table of Trunk Group Info. SEQUENCE OF TrunkGroupInfoPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2 |
trunkGroupInfoPortTableEntryA row in the Trunk Info table. TrunkGroupInfoPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1 |
trunkGroupInfoPortTrunkIdThe Trunk identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1.1 |
trunkGroupInfoPortPortIdThe Port identifier.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1.2 |
trunkGroupInfoPortStatusThe Port Status.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.3.9.2.1.3 |
layer2Oper OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.2.4 |
layer3 OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3 |
layer3Configs OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1 |
ipInterfaceCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1 |
ipInterfaceTableMaxThe maximum number of rows in the IP interface table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.1 |
ipCurCfgIntfTableThe table of IP interface configuration. SEQUENCE OF IpCurCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2 |
ipCurCfgIntfEntryA row in the Ip interface table IpCurCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1 |
ipCurCfgIntfIndexThe interface number for which the IP information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.1 |
ipCurCfgIntfAddrThe IP address of the interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.2 |
ipCurCfgIntfMaskThe subnet mask of the interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.3 |
ipCurCfgIntfBroadcastThe broadcast address of the interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.4 |
ipCurCfgIntfVlanThe VLAN associated with the interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.5 |
ipCurCfgIntfStateThe state of the interface.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.6 |
ipCurCfgIntfBootpRelayEnable/disable BOOTP relay.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.2.1.7 |
ipNewCfgIntfTableThe table of interface configuration in the New Configuration Block. SEQUENCE OF IpNewCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3 |
ipNewCfgIntfEntryA row in the Ip interface table IpNewCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1 |
ipNewCfgIntfIndexThe interface number for which the IP information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.1 |
ipNewCfgIntfAddrThe IP address of the interface.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.2 |
ipNewCfgIntfMaskThe subnet mask of the interface.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.3 |
ipNewCfgIntfVlanThe VLAN associated with the interface.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.5 |
ipNewCfgIntfStateThe state of the interface.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.6 |
ipNewCfgIntfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.7 |
ipNewCfgIntfBootpRelayEnable/disable BOOTP relay.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.1.3.1.8 |
ipGatewayCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2 |
ipGatewayTableMaxThe maximum number of rows in the IP gateway table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.3 |
ipCurCfgGwTableThe table of gateways in the Current configuration Block. SEQUENCE OF IpCurCfgGwEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4 |
ipCurCfgGwEntryA row in the Ip gateway table IpCurCfgGwEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1 |
ipCurCfgGwIndexThe gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.1 |
ipCurCfgGwAddrThe IP address of the default gateway.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.2 |
ipCurCfgGwIntervalThe interval between ping attempts.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.3 |
ipCurCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.4 |
ipCurCfgGwStateThe state of the default gateway.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.5 |
ipCurCfgGwArpThe state of ARP only health checks.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.4.1.6 |
ipNewCfgGwTableThe table of gateway configuration in the new configuration block. SEQUENCE OF IpNewCfgGwEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5 |
ipNewCfgGwEntryA row in the Ip default gateway table IpNewCfgGwEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1 |
ipNewCfgGwIndexThe gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.1 |
ipNewCfgGwAddrThe IP address of the default gateway.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.2 |
ipNewCfgGwIntervalThe interval in seconds between ping attempts.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.3 |
ipNewCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.4 |
ipNewCfgGwStateThe state of the default gateway.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.5 |
ipNewCfgGwDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.6 |
ipNewCfgGwArpThe state of the ARP only health checks.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.2.5.1.7 |
ipStaticRouteCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3 |
ipStaticRouteTableMaxSizeThe maximum number of rows in the Static Route table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.1 |
ipCurCfgStaticRouteTableThe table of static routes in the current configuration block. SEQUENCE OF IpCurCfgStaticRouteEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2 |
ipCurCfgStaticRouteEntryA row in the static IP route table IpCurCfgStaticRouteEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1 |
ipCurCfgStaticRouteIndxThe index of the static routing table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.1 |
ipCurCfgStaticRouteDestIpThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.2 |
ipCurCfgStaticRouteMaskThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.3 |
ipCurCfgStaticRouteGatewayThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.4 |
ipCurCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.2.1.5 |
ipNewCfgStaticRouteTableThe table of static routes in the new configuration block. SEQUENCE OF IpNewCfgStaticRouteEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3 |
ipNewCfgStaticRouteEntryA row in the static IP route table IpNewCfgStaticRouteEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1 |
ipNewCfgStaticRouteIndxThe index of the static routing table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.1 |
ipNewCfgStaticRouteDestIpThe destination IP address of this route.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.2 |
ipNewCfgStaticRouteMaskThe subnet mask of this route.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.3 |
ipNewCfgStaticRouteGatewayThe IP address of the gateway for this route.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.4 |
ipNewCfgStaticRouteActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.5 |
ipNewCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.3.1.6 |
ipStaticRouteClearAllByDestIpClears all static routes with the specified destination IP address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.4 |
ipStaticRouteClearAllByGatewayIpClears all static routes with the specified gateway IP address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.5 |
ipStaticRouteClearAllByInterfaceClears all routes on the specified inteface number.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.6 |
ipStaticRouteClearAllWhen set to clear(2),clears all static routes. Otherwhise nothing is done.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.3.7 |
ipForwardCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4 |
ipFwdGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1 |
ipFwdCurCfgStateIP forwarding global state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.1 |
ipFwdNewCfgStateIP forwarding global state.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.2 |
ipFwdCurCfgDirectedBcastEnable or disable forwarding directed broadcasts.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.3 |
ipFwdNewCfgDirectedBcastEnable or disable forwarding directed broadcasts.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.4.1.4 |
vrrpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6 |
vrrpGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1 |
vrrpCurCfgGenStateEnable or disable VRRP operation globally.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.1 |
vrrpNewCfgGenStateEnable or disable VRRP operation globally.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.2 |
vrrpCurCfgGenTckVirtRtrIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.3 |
vrrpNewCfgGenTckVirtRtrIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other virtual routers.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.4 |
vrrpCurCfgGenTckIpIntfIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.5 |
vrrpNewCfgGenTckIpIntfIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the state of other router interfaces.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.6 |
vrrpCurCfgGenTckVlanPortIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.7 |
vrrpNewCfgGenTckVlanPortIncThe increment of VRRP virtual router priority. The priority is
adjusted by tracking the port state of ports that belongs to the
same virtual LAN as the virtual router.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.1.8 |
vrrpVirtRtrTableMaxSizeThe maximum number of entries in VRRP virtual router table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.2 |
vrrpCurCfgVirtRtrTableThe table of VRRP virtual routers configuration in current_config. SEQUENCE OF VrrpCurCfgVirtRtrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3 |
vrrpCurCfgVirtRtrTableEntryInformation about a VRRP virtual router. VrrpCurCfgVirtRtrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1 |
vrrpCurCfgVirtRtrIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.1 |
vrrpCurCfgVirtRtrIDThe VRRP virtual router identifier.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.2 |
vrrpCurCfgVirtRtrAddrThe VRRP virtual router IP address.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.3 |
vrrpCurCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.4 |
vrrpCurCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.5 |
vrrpCurCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.6 |
vrrpCurCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.7 |
vrrpCurCfgVirtRtrStateEnable or disable the VRRP virtual router.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.8 |
vrrpCurCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.10 |
vrrpCurCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.11 |
vrrpCurCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.3.1.12 |
vrrpNewCfgVirtRtrTableThe table of VRRP virtual routers configuration in current_config. SEQUENCE OF VrrpNewCfgVirtRtrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4 |
vrrpNewCfgVirtRtrTableEntryInformation about a VRRP virtual router. VrrpNewCfgVirtRtrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1 |
vrrpNewCfgVirtRtrIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.1 |
vrrpNewCfgVirtRtrIDThe VRRP virtual router identifier.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.2 |
vrrpNewCfgVirtRtrAddrThe VRRP virtual router IP address.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.3 |
vrrpNewCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.4 |
vrrpNewCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.5 |
vrrpNewCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual router.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.6 |
vrrpNewCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.7 |
vrrpNewCfgVirtRtrStateEnable or disable the VRRP virtual router.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.8 |
vrrpNewCfgVirtRtrDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.9 |
vrrpNewCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.11 |
vrrpNewCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.12 |
vrrpNewCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.4.1.13 |
vrrpIfTableMaxSizeThe maximum number of entries in VRRP interface table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.5 |
vrrpCurCfgIfTableThe table of VRRP interface configuration in current_config. SEQUENCE OF VrrpCurCfgIfTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6 |
vrrpCurCfgIfTableEntryInformation about a VRRP interface. VrrpCurCfgIfTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1 |
vrrpCurCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1.1 |
vrrpCurCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1.2 |
vrrpCurCfgIfPasswdThe password for authentication.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.6.1.3 |
vrrpNewCfgIfTableThe table of VRRP interface configuration in current_config. SEQUENCE OF VrrpNewCfgIfTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7 |
vrrpNewCfgIfTableEntryInformation about a VRRP interface. VrrpNewCfgIfTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1 |
vrrpNewCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.1 |
vrrpNewCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.2 |
vrrpNewCfgIfPasswdThe password for authentication.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.3 |
vrrpNewCfgIfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.7.1.4 |
vrrpVirtRtrGrpTableMaxSizeThe maximum number of entries in VRRP Group table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.8 |
vrrpCurCfgVirtRtrGrpTableThe table of VRRP virtual router group in current_config. SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9 |
vrrpCurCfgVirtRtrGrpTableEntryInformation about a VRRP failover virtual router. VrrpCurCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1 |
vrrpCurCfgVirtRtrGrpIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.1 |
vrrpCurCfgVirtRtrGrpIDThe VRRP virtual router identifier.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.2 |
vrrpCurCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.3 |
vrrpCurCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.4 |
vrrpCurCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.5 |
vrrpCurCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.6 |
vrrpCurCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.7 |
vrrpCurCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.10 |
vrrpCurCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.9.1.11 |
vrrpNewCfgVirtRtrGrpTableThe table of VRRP virtual router group configuration in new_config. SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10 |
vrrpNewCfgVirtRtrGrpTableEntryInformation about a VRRP failover virtual router. VrrpNewCfgVirtRtrGrpTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1 |
vrrpNewCfgVirtRtrGrpIndxThe VRRP virtual router table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.1 |
vrrpNewCfgVirtRtrGrpIDThe VRRP virtual router identifier.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.2 |
vrrpNewCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.3 |
vrrpNewCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.4 |
vrrpNewCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual router.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.5 |
vrrpNewCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit preemptionrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.6 |
vrrpNewCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.7 |
vrrpNewCfgVirtRtrGrpDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.8 |
vrrpNewCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.11 |
vrrpNewCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.6.10.1.12 |
arpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7 |
arpCurCfgReARPPeriodRe-ARP Period in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.1 |
arpNewCfgReARPPeriodRe-ARP Period in seconds.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.2 |
ipStaticArpTableMaxSizeThe maximum number of rows in the Static ARP table.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.3 |
ipCurCfgStaticArpTableThe table of static ARPs in the current configuration block. SEQUENCE OF IpCurCfgStaticArpEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4 |
ipCurCfgStaticArpEntryA row in the static ARP table IpCurCfgStaticArpEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1 |
ipCurCfgStaticArpIndxThe index of the static ARP table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.1 |
ipCurCfgStaticArpIpThe IP address for the ARP entry.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.2 |
ipCurCfgStaticArpMACThe MAC address for the ARP entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.3 |
ipCurCfgStaticArpVlanThe VLAN for the ARP entry.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.4 |
ipCurCfgStaticArpPortThe port for the ARP entry.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.4.1.5 |
ipNewCfgStaticArpTableThe table of static ARPs in the new configuration block. SEQUENCE OF IpNewCfgStaticArpEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5 |
ipNewCfgStaticArpEntryA row in the static ARP table IpNewCfgStaticArpEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1 |
ipNewCfgStaticArpIndxThe index of the static ARP table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.1 |
ipNewCfgStaticArpIpThe IP address for the ARP entry.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.2 |
ipNewCfgStaticArpMACThe MAC address for the ARP entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.3 |
ipNewCfgStaticArpVlanThe VLAN for the ARP entry.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.4 |
ipNewCfgStaticArpPortThe port for the ARP entry.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.5 |
ipNewCfgStaticArpActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.7.5.1.6 |
ipBootpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8 |
ipCurCfgBootpAddrThe IP address of BOOTP server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.1 |
ipNewCfgBootpAddrThe IP address of BOOTP server.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.2 |
ipCurCfgBootpAddr2The IP address of second BOOTP server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.3 |
ipNewCfgBootpAddr2The IP address of second BOOTP server.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.4 |
ipCurCfgBootpStateThe state of BOOTP relay.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.5 |
ipNewCfgBootpStateThe state of BOOTP relay.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.8.6 |
dnsCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9 |
dnsCurCfgPrimaryIpAddrThe DNS primary IP address in the current_configuration block.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.1 |
dnsNewCfgPrimaryIpAddrThe DNS primary IP address in the new_configuration block.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.2 |
dnsCurCfgSecondaryIpAddrThe DNS primary IP address in the current_configuration block.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.3 |
dnsNewCfgSecondaryIpAddrThe DNS primary IP address in the new_configuration block.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.4 |
dnsCurCfgDomainNameThe DNS doamin name in the current_configuration block.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.5 |
dnsNewCfgDomainNameThe DNS doamin name in the new_configuration block.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.9.6 |
ipNwfCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10 |
ipNwfTableMaxThe maximum number of rows in the IP network filter table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.1 |
ipCurCfgNwfTableThe table of IP network filter configuration in the current_config. SEQUENCE OF IpCurCfgNwfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2 |
ipCurCfgNwfEntryInformation about an IP network filter. IpCurCfgNwfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1 |
ipCurCfgNwfIndexThe netowrk filter number for which the NWF is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.1 |
ipCurCfgNwfAddrThe IP address of the network filter.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.2 |
ipCurCfgNwfMaskThe subnet mask of the network filter.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.3 |
ipCurCfgNwfStateEnable or disable the network filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.2.1.4 |
ipNewCfgNwfTableThe table of IP network filter configuration in the current_config. SEQUENCE OF IpNewCfgNwfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3 |
ipNewCfgNwfEntryInformation about an IP network filter. IpNewCfgNwfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1 |
ipNewCfgNwfIndexThe netowrk filter number for which the NWF is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.1 |
ipNewCfgNwfAddrThe IP address of the network filter.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.2 |
ipNewCfgNwfMaskThe subnet mask of the network filter.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.3 |
ipNewCfgNwfStateEnable or disable the network filter.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.4 |
ipNewCfgNwfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.10.3.1.5 |
ipRmapCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11 |
ipRmapTableMaxThe maximum number of rows in the IP route map table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.1 |
ipCurCfgRmapTableThe table of IP route map configuration in the current_config. SEQUENCE OF IpCurCfgRmapEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2 |
ipCurCfgRmapEntryInformation about an IP route map. IpCurCfgRmapEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1 |
ipCurCfgRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.1 |
ipCurCfgRmapMetricThe metric of the route map. 4294967295 means nonero Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.3 |
ipCurCfgRmapPrecThe precedence of the route map.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.4 |
ipCurCfgRmapStateEnable or disable the route map.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.6 |
ipCurCfgRmapMetricTypeThe OSPF metric-type of the matched route.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.2.1.8 |
ipNewCfgRmapTableThe table of IP route map configuration in the current_config. SEQUENCE OF IpNewCfgRmapEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3 |
ipNewCfgRmapEntryInformation about an IP route map. IpNewCfgRmapEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1 |
ipNewCfgRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.1 |
ipNewCfgRmapMetricThe metric of the route map. 16777215 means nonerw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.3 |
ipNewCfgRmapPrecThe precedence of the route map.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.4 |
ipNewCfgRmapStateEnable or disable the route map.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.6 |
ipNewCfgRmapMetricTypeThe OSPF metric-type of the matched route.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.8 |
ipNewCfgRmapDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.3.1.9 |
ipAlistTableMaxThe maximum number of rows in the IP route map table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.4 |
ipCurCfgAlistTableThe table of IP route map access list configuration in the
current_config. SEQUENCE OF IpCurCfgAlistEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5 |
ipCurCfgAlistEntryInformation about an IP route map. IpCurCfgAlistEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1 |
ipCurCfgAlistRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.1 |
ipCurCfgAlistIndexThe access list number for which the access list is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.2 |
ipCurCfgAlistNwfThe network filter number of the route map access list.
0 means nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.3 |
ipCurCfgAlistMetricThe metric of the route map access list. 4294967295 means nonero Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.4 |
ipCurCfgAlistActionAction of the route map access list.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.5 |
ipCurCfgAlistStateEnable or disable the route map access list.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.5.1.6 |
ipNewCfgAlistTableThe table of IP route map access list configuration in the
current_config. SEQUENCE OF IpNewCfgAlistEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6 |
ipNewCfgAlistEntryInformation about an IP route map. IpNewCfgAlistEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1 |
ipNewCfgAlistRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.1 |
ipNewCfgAlistIndexThe access list number for which the access list is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.2 |
ipNewCfgAlistNwfThe network filter number of the route map access list.
0 means nonerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.3 |
ipNewCfgAlistMetricThe metric of the route map access list. 16777215 means nonerw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.4 |
ipNewCfgAlistActionAction of the route map access list.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.5 |
ipNewCfgAlistStateEnable or disable the route map access list.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.6 |
ipNewCfgAlistDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.11.6.1.7 |
ospfCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13 |
ospfGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1 |
ospfCurCfgDefaultRouteMetricSpecify the metric to be assigned.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.1 |
ospfNewCfgDefaultRouteMetricSpecify the metric to be assigned.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.2 |
ospfCurCfgDefaultRouteMetricTypeSpecify the AS External metric type to be assigned.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.3 |
ospfNewCfgDefaultRouteMetricTypeSpecify the AS External metric type to be assigned.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.4 |
ospfIntfTableMaxSizeThe maximum number of rows in the OSPF Interface table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.5 |
ospfAreaTableMaxSizeThe maximum number of rows in the OSPF Area table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.6 |
ospfRangeTableMaxSizeThe maximum number of rows in the OSPF Range table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.7 |
ospfVirtIntfTableMaxSizeThe maximum number of rows in the OSPF Virtual Interface
table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.8 |
ospfHostTableMaxSizeThe maximum number of rows in the OSPF Host table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.9 |
ospfCurCfgStateOSPF global state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.10 |
ospfNewCfgStateGlobally turn OSPF on or off.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.11 |
ospfCurCfgLSDBThe LSDB limit for external LSA.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.12 |
ospfNewCfgLSDBSet the LSDB limit for external LSA.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.1.13 |
ospfCurCfgAreaTableThe table of OSPF Area configuration in the current_config. SEQUENCE OF OspfCurCfgAreaEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2 |
ospfCurCfgAreaEntryInformation about a OSPF area. OspfCurCfgAreaEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1 |
ospfCurCfgAreaIndexThe OSPF area number for which the OSPF area table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.1 |
ospfCurCfgAreaIdThe IP Address of the OSPF area.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.2 |
ospfCurCfgAreaSpfIntervalThe SPF interval for the OSPF area.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.3 |
ospfCurCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.4 |
ospfCurCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.5 |
ospfCurCfgAreaMetricMetric (1-65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.6 |
ospfCurCfgAreaStatusStatus
disabled(0)
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.2.1.7 |
ospfNewCfgAreaTableThe table of OSPF Area configuration in the new_config. SEQUENCE OF OspfNewCfgAreaEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3 |
ospfNewCfgAreaEntryInformation about a OSPF area. OspfNewCfgAreaEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1 |
ospfNewCfgAreaIndexThe OSPF area number for which the OSPF area table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.1 |
ospfNewCfgAreaIdThe IP Address of the OSPF area.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.2 |
ospfNewCfgAreaSpfIntervalThe SPF interval for the OSPF area.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.3 |
ospfNewCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.4 |
ospfNewCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.5 |
ospfNewCfgAreaMetricMetric (1-65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.6 |
ospfNewCfgAreaStatusStatus
disabled(0)
enabled(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.7 |
ospfNewCfgAreaDeleteDelete the area
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.3.1.8 |
ospfRouteRedistribution OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4 |
ospfRedistributeStatic OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1 |
ospfCurCfgStaticMetricThe metric to be assigned to static routes.
A value of 0 indicates none.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.1 |
ospfNewCfgStaticMetricThe metric to be assigned to static routes.
A value of 0 indicates none.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.2 |
ospfCurCfgStaticMetricTypeThe AS External metric type for static routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.3 |
ospfNewCfgStaticMetricTypeThe AS External metric type for static routes.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.4 |
ospfCurCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.5 |
ospfNewCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.6 |
ospfNewCfgStaticAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.7 |
ospfNewCfgStaticRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.1.8 |
ospfRedistributeFixed OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4 |
ospfCurCfgFixedMetricThe export metric for fixed routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.1 |
ospfNewCfgFixedMetricThe export metric for fixed routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.2 |
ospfCurCfgFixedMetricTypeThe AS External metric type for fixed routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.3 |
ospfNewCfgFixedMetricTypeThe AS External metric type for fixed routes.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.4 |
ospfCurCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.5 |
ospfNewCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.6 |
ospfNewCfgFixedAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.7 |
ospfNewCfgFixedRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.4.8 |
ospfRedistributeRip OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5 |
ospfCurCfgRipMetricThe export metric for RIP routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.1 |
ospfNewCfgRipMetricThe export metric for RIP routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.2 |
ospfCurCfgRipMetricTypeThe AS External metric type for RIP routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.3 |
ospfNewCfgRipMetricTypeThe AS External metric type for RIP routes.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.4 |
ospfCurCfgRipOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.5 |
ospfNewCfgRipOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.6 |
ospfNewCfgRipAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.7 |
ospfNewCfgRipRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.4.5.8 |
ospfCurCfgMdkeyTableThe table of OSPF MD5 keys in the current_config. SEQUENCE OF OspfCurCfgMdkeyEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5 |
ospfCurCfgMdkeyEntryInformation about an OSPF MD keys table. OspfCurCfgMdkeyEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5.1 |
ospfCurCfgMdkeyIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5.1.1 |
ospfCurCfgMdkeyKeyThe character string representing the MD5 Key.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.5.1.2 |
ospfNewCfgMdkeyTableThe table of OSPF MD5 keys in the new_config. SEQUENCE OF OspfNewCfgMdkeyEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6 |
ospfNewCfgMdkeyEntryInformation about an OSPF MD keys table. OspfNewCfgMdkeyEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1 |
ospfNewCfgMdkeyIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1.1 |
ospfNewCfgMdkeyKeyThe character string representing the MD5 Key.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1.2 |
ospfNewCfgMdkeyDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.6.1.3 |
ospfCurCfgIntfTableThe table of OSPF Interface configuration in the current_config. SEQUENCE OF OspfCurCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7 |
ospfCurCfgIntfEntryInformation about an OSPF Interface. OspfCurCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1 |
ospfCurCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.1 |
ospfCurCfgIntfIdThe IP Address of the OSPF interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.2 |
ospfCurCfgIntfAreaThe index of the area that the interface belongsro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.3 |
ospfCurCfgIntfMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.4 |
ospfCurCfgIntfCostInterface costro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.5 |
ospfCurCfgIntfPrioInterface router priorityro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.6 |
ospfCurCfgIntfHelloHello intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.7 |
ospfCurCfgIntfDeadDead intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.8 |
ospfCurCfgIntfTransTransit delayro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.9 |
ospfCurCfgIntfRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.10 |
ospfCurCfgIntfAuthKeyAuthentication Keyro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.11 |
ospfCurCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.7.1.12 |
ospfNewCfgIntfTableThe table of OSPF Interface configuration in the new_config. SEQUENCE OF OspfNewCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8 |
ospfNewCfgIntfEntryInformation about an OSPF Interface. OspfNewCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1 |
ospfNewCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.1 |
ospfNewCfgIntfIdThe IP Address of the OSPF interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.2 |
ospfNewCfgIntfAreaThe index of the area that the interface belongs (0..2)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.3 |
ospfNewCfgIntfMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.4 |
ospfNewCfgIntfCostInterface cost(1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.5 |
ospfNewCfgIntfPrioInterface router priority(0..255)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.6 |
ospfNewCfgIntfHelloHello interval(1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.7 |
ospfNewCfgIntfDeadDead interval(1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.8 |
ospfNewCfgIntfTransTransit delay(1..3600)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.9 |
ospfNewCfgIntfRetraRetransmit interval(1..3600)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.10 |
ospfNewCfgIntfAuthKeyAuthentication Keyrw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.11 |
ospfNewCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.12 |
ospfNewCfgIntfDeleteDelete the interface
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.8.1.13 |
ospfCurCfgVirtIntfTableThe table of OSPF Virtual Interface configuration in the current_config. SEQUENCE OF OspfCurCfgVirtIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9 |
ospfCurCfgVirtIntfEntryInformation about an OSPF virtual Interface. OspfCurCfgVirtIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1 |
ospfCurCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.1 |
ospfCurCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.2 |
ospfCurCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.3 |
ospfCurCfgVirtIntfMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.4 |
ospfCurCfgVirtIntfHelloHello intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.5 |
ospfCurCfgVirtIntfDeadDead intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.6 |
ospfCurCfgVirtIntfTransTransit delayro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.7 |
ospfCurCfgVirtIntfRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.8 |
ospfCurCfgVirtIntfAuthKeyAuthentication Keyro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.9 |
ospfCurCfgVirtIntfStatusStatus
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.9.1.10 |
ospfNewCfgVirtIntfTableThe table of OSPF Virtual Interface configuration in the new_config. SEQUENCE OF OspfNewCfgVirtIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10 |
ospfNewCfgVirtIntfEntryInformation about an OSPF virtual Interface. OspfNewCfgVirtIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1 |
ospfNewCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.1 |
ospfNewCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.2 |
ospfNewCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.3 |
ospfNewCfgVirtIntfMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.4 |
ospfNewCfgVirtIntfHelloHello interval(1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.5 |
ospfNewCfgVirtIntfDeadDead interval(1..65535)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.6 |
ospfNewCfgVirtIntfTransTransit dela(1..3600)yrw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.7 |
ospfNewCfgVirtIntfRetraRetransmit interval(1..3600)rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.8 |
ospfNewCfgVirtIntfAuthKeyAuthentication Key SIZE(0..8)rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.9 |
ospfNewCfgVirtIntfStatusStatus
disabled(0),
enabled(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.10 |
ospfNewCfgVirtIntfDeleteDelete
other(0),
delete(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.10.1.11 |
ospfMdkeyTableMaxSizeThe maximum number of rows in the OSPF Mdkey table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.11 |
ospfCurCfgHostTableThe table of OSPF Host configuration. SEQUENCE OF OspfCurCfgHostEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12 |
ospfCurCfgHostEntryInformation about a OSPF host. OspfCurCfgHostEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1 |
ospfCurCfgHostIndexThe OSPF host number for which the OSPF host table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.1 |
ospfCurCfgHostIpAddrThe IP Address of the OSPF host.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.2 |
ospfCurCfgHostAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.3 |
ospfCurCfgHostCostThe cost of the OSPF host.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.4 |
ospfCurCfgHostStateEnable or disable an OSPF Hostro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.12.1.5 |
ospfNewCfgHostTableThe table of OSPF Host configuration. SEQUENCE OF OspfNewCfgHostEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13 |
ospfNewCfgHostEntryInformation about a OSPF host. OspfNewCfgHostEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1 |
ospfNewCfgHostIndexThe OSPF host number for which the OSPF host table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.1 |
ospfNewCfgHostIpAddrThe IP Address of the OSPF host.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.2 |
ospfNewCfgHostAreaIndexThe OSPF area index.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.3 |
ospfNewCfgHostCostThe cost of the OSPF host.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.4 |
ospfNewCfgHostStateEnable or disable an OSPF Hostrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.5 |
ospfNewCfgHostDeleteDelete the OSPF host:
no(0),
yes(1)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.13.1.6 |
ospfCurCfgRangeTableThe table of OSPF summary range in the current configuration. SEQUENCE OF OspfCurCfgRangeEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14 |
ospfCurCfgRangeEntryInformation about an OSPF summary range. OspfCurCfgRangeEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1 |
ospfCurCfgRangeIndexThe range number for which the OSPF summary range table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.1 |
ospfCurCfgRangeAddrThe IP Address of the range.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.2 |
ospfCurCfgRangeMaskThe mask of the range.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.3 |
ospfCurCfgRangeAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.4 |
ospfCurCfgRangeHideStateThe state of the hide range.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.5 |
ospfCurCfgRangeStateThe state of the range.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.14.1.6 |
ospfNewCfgRangeTableThe table of OSPF summary range in the new configuration. SEQUENCE OF OspfNewCfgRangeEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15 |
ospfNewCfgRangeEntryInformation about an OSPF summary range. OspfNewCfgRangeEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1 |
ospfNewCfgRangeIndexThe range number for which the OSPF summary range table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.1 |
ospfNewCfgRangeAddrThe IP Address of the range.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.2 |
ospfNewCfgRangeMaskThe mask of the range.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.3 |
ospfNewCfgRangeAreaIndexThe area index.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.4 |
ospfNewCfgRangeHideStateThe state of the hide range.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.5 |
ospfNewCfgRangeStateThe state of the range.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.6 |
ospfNewCfgRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.13.15.1.7 |
ipGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.14 |
ipCurCfgRouterIDThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.14.1 |
ipNewCfgRouterIDThe router ID of the switch.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.14.2 |
igmpCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15 |
igmpCurCfgOnOffGlobally turn IGMP On/Off.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.1 |
igmpNewCfgOnOffGlobally turn IGMP On/Off.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.2 |
igmpSnoopCfgGen OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3 |
igmpSnoopCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1 |
igmpSnoopCurCfgTimeoutSet IGMP Report timeout.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.1 |
igmpSnoopNewCfgTimeoutSet IGMP Report timeout.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.2 |
igmpSnoopCurCfgMrtoThe value of multicast router timeout in the current config.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.3 |
igmpSnoopNewCfgMrtoThe value of multicast router timeout in the new config.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.4 |
igmpSnoopNewCfgVlanFastlvAddThe VLAN to be added to fastleave vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.12 |
igmpSnoopNewCfgVlanFastlvRemThe VLAN to be removed from fastleave vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.13 |
igmpSnoopCurCfgVlanFastlvBmapThe fastlv enabled vlans present in the in vlan map list.
The fastlv enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fastlv enabled
0 - The represented vlan does not have fastlv enabled.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.14 |
igmpSnoopNewCfgVlanFastlvBmapThe fastlv enabled vlans present in the in vlan map list.
The fastlv enabled vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has fastlv enabled
0 - The represented vlan does not have fastlv enabled.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.15 |
igmpSnoopCurCfgRobustThe value of expected packet loss on subnet in the current config.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.16 |
igmpSnoopNewCfgRobustThe value of expected packet loss on subnet in the new config.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.17 |
igmpSnoopNewCfgVlanAddThe VLAN to be added to snooping vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.18 |
igmpSnoopNewCfgVlanRemThe VLAN to be removed from snooping vlan list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.19 |
igmpSnoopNewCfgVlanClearRemoving ALL Snooping Vlans.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.20 |
igmpSnoopCurCfgVlanBmapThe snooping vlans present in the in vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.21 |
igmpSnoopNewCfgVlanBmapThe snooping vlans present in the in vlan map list.
The snooping vlans are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Vlan 9
|| ||
|| ||___ Vlan 8
|| |____ Vlan 7
|| . . .
||_________ Vlan 2
|__________ Vlan 1
where x : 1 - The represented vlan has snoop enabled
0 - The represented vlan does not have snooping enabled.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.22 |
igmpSnoopCurCfgQIntervalIGMP Query Interval of current config.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.23 |
igmpSnoopNewCfgQIntervalIGMP Query Interval of new config.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.24 |
igmpSnoopCurCfgSrcIpThe source ip for GSQ proxy in current config.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.25 |
igmpSnoopNewCfgSrcIpThe source ip for GSQ proxy in new config.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.26 |
igmpSnoopCurCfgAggrEnaDisEnable/Disable of IGMP Report aggregation.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.27 |
igmpSnoopNewCfgAggrEnaDisEnable/Disable of IGMP Report aggregation.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.28 |
igmpSnoopCurCfgFloodEnable/Disable of flood unregistered IPMCro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.29 |
igmpSnoopNewCfgFloodEnable/Disable of flood unregistered IPMCrw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.1.30 |
igmpV3SnoopCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2 |
igmpV3SnoopCurCfgSourcesNumber of sources to snoop in a group record in current config.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.1 |
igmpV3SnoopNewCfgSourcesNumber of sources to snoop in a group record in new config.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.2 |
igmpV3SnoopCurCfgEnaDisThe current status of IGMP V3 Snooping.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.3 |
igmpV3SnoopNewCfgEnaDisSet Enable/Disable of IGMP V3 Snooping.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.4 |
igmpV3SnoopCurCfgExcludeEnaDisThe current status of IGMP V3 EXCLUDE filter-mode Snooping.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.5 |
igmpV3SnoopNewCfgExcludeEnaDisSet Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.6 |
igmpV3SnoopCurCfgV1V2EnaDisThe current status of IGMP V1/V2 Report Snooping.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.7 |
igmpV3SnoopNewCfgV1V2EnaDisSet Enable/Disable of IGMP V1/V2 Report Snooping.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.3.2.8 |
igmpStaticMrtrCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4 |
igmpStaticMrtrCurCfgTableThe IGMP Static Multicast Router table in the current configuration block. SEQUENCE OF IgmpStaticMrtrCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1 |
igmpStaticMrtrCurCfgTableEntryA row in the Static Multicast Router table. IgmpStaticMrtrCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1 |
igmpStaticMrtrCurCfgIndxThe IGMP Multicast Router table port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.1 |
igmpStaticMrtrCurCfgPortIdThe IGMP Multicast Router port in the current configuration block.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.2 |
igmpStaticMrtrCurCfgVlanIdThe IGMP Multicast Router port in the current configuration block.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.3 |
igmpStaticMrtrCurCfgVersionThe IGMP version of the IGMP Static Multicast Router.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.1.1.4 |
igmpStaticMrtrNewCfgTableThe IGMP Static Multicast Router table in the new configuration block. SEQUENCE OF IgmpStaticMrtrNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2 |
igmpStaticMrtrNewCfgTableEntryA row in the Static Multicast Router table. IgmpStaticMrtrNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1 |
igmpStaticMrtrNewCfgIndxThe IGMP Multicast Router table port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.1 |
igmpStaticMrtrNewCfgPortIdThe IGMP Multicast Router port in the new configuration block.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.2 |
igmpStaticMrtrNewCfgVlanIdThe IGMP Multicast Router port in the new configuration block.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.3 |
igmpStaticMrtrNewCfgVersionThe IGMP version of the IGMP Static Multicast Router.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.4 |
igmpStaticMrtrNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.4.2.1.5 |
igmpFilterCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5 |
igmpFltCurCfgTableThe IGMP filtering table in the current configuration block. SEQUENCE OF IgmpFltCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1 |
igmpFltCurCfgTableEntryA row in the filtering table. IgmpFltCurCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1 |
igmpFltCurCfgIndxThe IGMP filter table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.1 |
igmpFltCurCfgMcastIp1Range1 Multicast IP address to be filtered.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.2 |
igmpFltCurCfgMcastIp2Range2 Multicast IP address to be filtered.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.3 |
igmpFltCurCfgActionThe action for the IGMP filtering rule.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.4 |
igmpFltCurCfgStateThe state of this IGMP filtering rule.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.1.1.5 |
igmpFltNewCfgTableThe IGMP filtering table in the current configuration block. SEQUENCE OF IgmpFltNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2 |
igmpFltNewCfgTableEntryA row in the filtering table. IgmpFltNewCfgTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1 |
igmpFltNewCfgIndxThe IGMP filter table index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.1 |
igmpFltNewCfgMcastIp1Range1 Multicast source IP address to be filtered.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.2 |
igmpFltNewCfgMcastIp2Range2 Multicast source IP address to be filtered.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.3 |
igmpFltNewCfgActionThe action for the IGMP filtering rule.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.4 |
igmpFltNewCfgStateThe state of this IGMP filtering rule.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.5 |
igmpFltNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.2.1.6 |
igmpFltCurCfgPortTableThe IGMP filtering port table in the current configuration block. SEQUENCE OF IgmpFltCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3 |
igmpFltCurCfgPortTableEntryA row in the IGMP filtering port table. IgmpFltCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1 |
igmpFltCurCfgPortIndxThe port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1.1 |
igmpFltCurCfgPortStateEnable or disable IGMP filtering.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1.2 |
igmpFltCurCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to igmpFltCurCfgTable)
where x : 1 - The represented IGMP filter rule applied to the port
0 - The represented IGMP filter rule not applied to the portro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.3.1.3 |
igmpFltNewCfgPortTableThe IGMP filtering port table in the new configuration block. SEQUENCE OF IgmpFltNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4 |
igmpFltNewCfgPortTableEntryA row in the IGMP filtering port table. IgmpFltNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1 |
igmpFltNewCfgPortIndxThe port index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.1 |
igmpFltNewCfgPortStateEnable or disable IGMP filtering.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.2 |
igmpFltNewCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the portro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.3 |
igmpFltNewCfgPortAddFiltRuleThis is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the
value '0' is returned always.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.4 |
igmpFltNewCfgPortRemFiltRuleThis is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read,
the value '0' is returned always.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.4.1.5 |
igmpFltCurCfgEnaDisEnable/Disable of IGMP Filtering.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.5 |
igmpFltNewCfgEnaDisEnable/Disable of IGMP Filtering.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.15.5.6 |
rip2Cfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18 |
ripCurCfgIntfTableThe table of RIP on IP interface configuration in the current_config. SEQUENCE OF RipCurCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1 |
ripCurCfgIntfEntryInformation about RIP on IP interface. RipCurCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1 |
ripCurCfgIntfIndexThe interface number for which the RIP information is related.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.1 |
ripCurCfgIntfVersionRIP version.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.2 |
ripCurCfgIntfSupplyEnable or disable supplying route updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.3 |
ripCurCfgIntfListenEnable or disable listening to route updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.4 |
ripCurCfgIntfDefaultSpecifies what RIP does with default routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.5 |
ripCurCfgIntfTrigUpdateEnable or disable tirggered updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.6 |
ripCurCfgIntfMcastUpdateEnable or disable multicast updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.7 |
ripCurCfgIntfPoisonReverseRIP poison reverse.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.8 |
ripCurCfgIntfStateEnable or disable RIP protocol.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.9 |
ripCurCfgIntfMetricRIP route metric for this interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.10 |
ripCurCfgIntfAuthEnable or disable RIP update authorization with a
simple plain text password.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.11 |
ripCurCfgIntfKeyRIP update authentication password.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.12 |
ripCurCfgIntfSplitHorizonRIP split horizon.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.1.1.13 |
ripNewCfgIntfTableThe table of RIP on IP interface configuration in the new_config. SEQUENCE OF RipNewCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2 |
ripNewCfgIntfEntryInformation about RIP on IP interface. RipNewCfgIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1 |
ripNewCfgIntfIndexThe interface number for which the RIP information is related.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.1 |
ripNewCfgIntfVersionRIP version.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.2 |
ripNewCfgIntfSupplyEnable or disable supplying route updates.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.3 |
ripNewCfgIntfListenEnable or disable listening to route updates.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.4 |
ripNewCfgIntfDefaultSpecifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.5 |
ripNewCfgIntfTrigUpdateEnable or disable tirggered updates.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.6 |
ripNewCfgIntfMcastUpdateEnable or disable multicast updates.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.7 |
ripNewCfgIntfPoisonReverseRIP poison reverse.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.8 |
ripNewCfgIntfStateEnable or disable RIP protocol.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.9 |
ripNewCfgIntfMetricRIP route metric for this interface.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.10 |
ripNewCfgIntfAuthEnable or disable RIP update authorization with a
simple plain text password.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.11 |
ripNewCfgIntfKeyRIP update authentication password.rw DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.12 |
ripNewCfgIntfSplitHorizonRIP split horizon.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.2.1.13 |
ripGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3 |
rip2CurCfgStateRIP global state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.1 |
rip2NewCfgStateGlobally turn RIP on or off.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.2 |
rip2CurCfgUpdatePeriodUpdate Period in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.3 |
rip2NewCfgUpdatePeriodUpdate Period in seconds.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.3.4 |
ripRouteRedistribution OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4 |
ripRedistributeStatic OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1 |
ripCurCfgStaticMetricThe metric to be assigned to static routes.
A value of 0 indicates none.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.1 |
ripNewCfgStaticMetricThe metric to be assigned to static routes.
A value of 0 indicates none.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.2 |
ripCurCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.5 |
ripNewCfgStaticOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.6 |
ripNewCfgStaticAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.7 |
ripNewCfgStaticRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.1.8 |
ripRedistributeFixed OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4 |
ripCurCfgFixedMetricThe export metric for fixed routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.1 |
ripNewCfgFixedMetricThe export metric for fixed routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.2 |
ripCurCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.5 |
ripNewCfgFixedOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.6 |
ripNewCfgFixedAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.7 |
ripNewCfgFixedRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.4.8 |
ripRedistributeOspf OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5 |
ripCurCfgOspfMetricThe export metric for RIP routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.1 |
ripNewCfgOspfMetricThe export metric for RIP routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.2 |
ripCurCfgOspfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.5 |
ripNewCfgOspfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.6 |
ripNewCfgOspfAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.7 |
ripNewCfgOspfRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.5.8 |
ripRedistributeEospf OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6 |
ripCurCfgEospfMetricThe export metric for RIP routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.1 |
ripNewCfgEospfMetricThe export metric for RIP routes. A value of 0 indicates nonerw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.2 |
ripCurCfgEospfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.5 |
ripNewCfgEospfOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.6 |
ripNewCfgEospfAddOutRmapThe route map to be add into out-rmap list. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.7 |
ripNewCfgEospfRemoveOutRmapThe route map to be removed from out-rmap list. When read,
0 is returned.rw Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.1.18.4.6.8 |
layer3Stats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2 |
arpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2 |
arpStatEntriesThe current number of ARP entries.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2.1 |
arpStatHighWaterThe highest number of ARP entries.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2.2 |
arpStatMaxEntriesThe maximum number of ARP entries.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.2.3 |
routeStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3 |
routeStatEntriesThe current number of IP routes.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3.1 |
routeStatHighWaterThe highest number of IP routes.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3.2 |
routeStatMaxEntriesThe maximum number of IP routes.ro Gauge32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.3.3 |
vrrpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4 |
vrrpStatInAdversThe number of good VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.1 |
vrrpStatOutAdversThe number of good VRRP advertisements which are transmitted.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.2 |
vrrpStatOutBadAdversThe number of bad VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.3 |
vrrpStatBadVersionThe number of bad VRRP version adv which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.4 |
vrrpStatBadAddressThe number of bad VRRP addres adv which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.5 |
vrrpStatBadPasswordThe number of bad VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.6 |
vrrpStatBadVridThe number of bad VRRP version ID adv which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.7 |
vrrpStatBadDataThe number of bad VRRP advertisements which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.8 |
vrrpStatBadIntervalThe number of bad VRRP iutervals which are received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.4.9 |
ospfStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5 |
ospfGeneralStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1 |
ospfCumRxTxStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1 |
ospfCumRxPktsThe sum total of all OSPF packets received on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.1 |
ospfCumTxPktsThe sum total of all OSPF packets transmitted on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.2 |
ospfCumRxHelloThe sum total of all Hello packets received on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.3 |
ospfCumTxHelloThe sum total of all Hello packets transmitted on all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.4 |
ospfCumRxDatabaseThe sum total of all Database Description packets received on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.5 |
ospfCumTxDatabaseThe sum total of all Database Description packets transmitted on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.6 |
ospfCumRxlsReqsThe sum total of all Link State Request packets received on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.7 |
ospfCumTxlsReqsThe sum total of all Link State Request packets transmitted on
all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.8 |
ospfCumRxlsAcksThe sum total of all Link State Acknowledgement packets received
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.9 |
ospfCumTxlsAcksThe sum total of all Link State Acknowledgement packets transmitted
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.10 |
ospfCumRxlsUpdatesThe sum total of all Link State Update packets received
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.11 |
ospfCumTxlsUpdatesThe sum total of all Link State Update packets transmitted
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.1.12 |
ospfCumNbrChangeStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2 |
ospfCumNbrhelloThe sum total of all Hello packets received from neighbours
on all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.1 |
ospfCumNbrStartThe sum total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.2 |
ospfCumNbrAdjointOkThe sum total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour
across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.3 |
ospfCumNbrNegotiationDoneThe sum total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, across all OSPF areas and
interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.4 |
ospfCumNbrExchangeDoneThe sum total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, across all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.5 |
ospfCumNbrBadRequestsThe sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
all interfaces and OSPF areas.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.6 |
ospfCumNbrBadSequenceThe sum total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.7 |
ospfCumNbrLoadingDoneThe sum total number of link state updates received for all
out-of-date portions of the database across all OSPF areas
and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.8 |
ospfCumNbrN1wayThe sum total number of Hello packets received from neighbours, in
which this router is not mentioned across all OSPF interfaces
and areas.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.9 |
ospfCumNbrRstAdThe sum total number of times the Neighbour adjacency has been reset
across all OPSF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.10 |
ospfCumNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) across all OSPF areas and
interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.11 |
ospfCumNbrN2wayThe sum total number of Hello packets received from neighbours, in
which this router is mentioned across all OSPF interfaces
and areas.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.2.12 |
ospfCumIntfChangeStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3 |
ospfCumIntfHelloThe sum total number of Hello packets sent on all interfaces
and areasro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.1 |
ospfCumIntfDownThe sum total number of interfaces down in all OSPF areas.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.2 |
ospfCumIntfLoopThe sum total of interfaces no longer connected to
the attatched network across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.3 |
ospfCumIntfUnloopThe sum total number of interfaces, connected to
the attatched network in all OSPF areas.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.4 |
ospfCumIntfWaitTimerThe sum total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) across all
OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.5 |
ospfCumIntfBackupThe sum total number of Backup Designated Routers on the attatched
network for all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.6 |
ospfCumIntfNbrChangeThe sum total number of changes in the set of bidirectional
neighbours associated with any interface across all OSPF areas.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.3.7 |
ospfTimersKickOffStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4 |
ospfTmrsKckOffHelloThe sum total number of times the Hello timer has been fired
(which triggers the send of a Hello packet) across all OPSF
areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.1 |
ospfTmrsKckOffRetransmitThe sum total number of times the Retransmit timer has been
fired across all OPSF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.2 |
ospfTmrsKckOffLsaLockThe sum total number of times the Lsa Lock timer has been
fired across all OSPF areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.3 |
ospfTmrsKckOffLsaAckThe sum total number of times the Lsa Ack timer has been
fired across all ospf areas and interfaces.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.4 |
ospfTmrsKckOffDbageThe total number of times the Dbage has been fired.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.5 |
ospfTmrsKckOffSummaryThe total number of times the Summary timer has been fired.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.6 |
ospfTmrsKckOffAseExportThe total number of times the ASE Export timer has been fired.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.1.4.7 |
ospfArea OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2 |
ospfAreaRxTxStatsThe table of OSPF Area Rx/Tx Statistics. SEQUENCE OF OspfAreaRxTxStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1 |
ospfAreaRxTxStatsEntryRx Tx packet Statistics about a OSPF area. OspfAreaRxTxStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1 |
ospfAreaRxTxIndexThe index of the ospf Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.1 |
ospfAreaRxPktsThe total number of OSPF packets received in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.2 |
ospfAreaTxPktsThe total number of OSPF packets transmitted in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.3 |
ospfAreaRxHelloThe total number of Hello packets received in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.4 |
ospfAreaTxHelloThe total number of Hello packets transmitted in this OSPF
area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.5 |
ospfAreaRxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.6 |
ospfAreaTxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.7 |
ospfAreaRxlsReqsThe total number of Link State Request packets received for
this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.8 |
ospfAreaTxlsReqsThe total number of Link State Request packets transmitted for
this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.9 |
ospfAreaRxlsAcksThe total number of Link State Acknowledgement packets received for
this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.10 |
ospfAreaTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.11 |
ospfAreaRxlsUpdatesThe total number of Link State Update packets received for
this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.12 |
ospfAreaTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.1.1.13 |
ospfAreaNbrChangeStatsThe table of OSPF Area Neighbour Statistics. SEQUENCE OF OspfAreaNbrChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2 |
ospfAreaNbrChangeStatsEntryArea Neighbour Change Statistics about a OSPF area. OspfAreaNbrChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1 |
ospfAreaNbrIndexThe index of the ospf Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.1 |
ospfAreaNbrhelloThe total number of Hello packets received from neighbours
in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.2 |
ospfAreaNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.3 |
ospfAreaNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.4 |
ospfAreaNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.5 |
ospfAreaNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.6 |
ospfAreaNbrBadRequestsThe sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.7 |
ospfAreaNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.8 |
ospfAreaNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.9 |
ospfAreaNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.10 |
ospfAreaNbrRstAdThe total number of times the Neighbour adjacency has been reset
across this OPSF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.11 |
ospfAreaNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.12 |
ospfAreaNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.2.1.13 |
ospfAreaChangeStatsThe table of OSPF Area Change Statistics. SEQUENCE OF OspfAreaChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3 |
ospfAreaChangeStatsEntryArea Change Statistics about a OSPF area. OspfAreaChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1 |
ospfAreaIntfIndexThe index of the OSPF Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.1 |
ospfAreaIntfHelloThe total number of Hello packets sent on this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.2 |
ospfAreaIntfDownThe total number of interfaces down in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.3 |
ospfAreaIntfLoopThe total number of interfaces no longer connected to
the attatched network in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.4 |
ospfAreaIntfUnloopThe total number of interfaces connected to the attatched
network in this OSPF area..ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.5 |
ospfAreaIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.6 |
ospfAreaIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.7 |
ospfAreaIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.3.1.8 |
ospfAreaErrorStatsThe table of OSPF Area Error Statistics. SEQUENCE OF OspfAreaErrorStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4 |
ospfAreaErrorStatsEntryError Statistics for an OSPF area. OspfAreaErrorStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1 |
ospfAreaErrIndexThe index of the OSPF Area for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.1 |
ospfAreaErrAuthFailureThe total number of packets received with a wrong password in
this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.2 |
ospfAreaErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.3 |
ospfAreaErrHelloMismatchThe total number of packets received with a different hello interval
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.4 |
ospfAreaErrDeadMismatchThe total number of packets received with a different dead interval
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.5 |
ospfAreaErrOptionsMismatchThe total number of packets received with a different options
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.6 |
ospfAreaErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.7 |
ospfAreaErrAreaMismatchThe total number of packets received with a wrong area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.2.4.1.8 |
ospfInterface OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3 |
ospfIntfRxTxStatsThe table of OSPF Interface Rx/Tx packet Statistics. SEQUENCE OF OspfIntfRxTxStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1 |
ospfIntfRxTxStatsEntryOSPF interface Rx/Tx packet statistics. OspfIntfRxTxStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1 |
ospfIntfRxTxIndexThe OSPF interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.1 |
ospfIntfRxPktsThe total number of OSPF packets received for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.2 |
ospfIntfTxPktsThe total number of OSPF packets transmitted for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.3 |
ospfIntfRxHelloThe total number of Hello packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.4 |
ospfIntfTxHelloThe total number of Hello packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.5 |
ospfIntfRxDatabaseThe total number of Database Description packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.6 |
ospfIntfTxDatabaseThe total number of Database Description packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.7 |
ospfIntfRxlsReqsThe total number of Link State Request packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.8 |
ospfIntfTxlsReqsThe total number of Link State Request packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.9 |
ospfIntfRxlsAcksThe total number of Link State Acknowledgement packets received
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.10 |
ospfIntfTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.11 |
ospfIntfRxlsUpdatesThe total number of Link State Update packets received for
this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.12 |
ospfIntfTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.1.1.13 |
ospfIntfNbrChangeStatsThe table of OSPF Interface Neighbour change Statistics. SEQUENCE OF OspfIntfNbrChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2 |
ospfIntfNbrChangeStatsEntryOSPF interface Neighbour Change statistics. OspfIntfNbrChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1 |
ospfIntfNbrIndexThe index of the OSPF Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.1 |
ospfIntfNbrhelloThe total number of Hello packets received from neighbours
in this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.2 |
ospfIntfNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.3 |
ospfIntfNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.4 |
ospfIntfNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.5 |
ospfIntfNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.6 |
ospfIntfNbrBadRequestsThe total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.7 |
ospfIntfNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options field
received in a Database Description packet.
Any of these conditions indicate that some error has occured during
adjacency establishment for this interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.8 |
ospfIntfNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.9 |
ospfIntfNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.10 |
ospfIntfNbrRstAdThe sum total number of times the Neighbour adjacency has been reset
on this interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.11 |
ospfIntfNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.12 |
ospfIntfNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.2.1.13 |
ospfIntfChangeStatsThe table of OSPF Interface change Statistics. SEQUENCE OF OspfIntfChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3 |
ospfIntfChangeStatsEntryOSPF interface Change statistics. OspfIntfChangeStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1 |
ospfIntfIndexThe index of the OSPF Interface for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.1 |
ospfIntfHelloThe total number of Hello packets sent by this interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.2 |
ospfIntfDownThe total number of times the interface was down.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.3 |
ospfIntfLoopThe total number of times the interface was no longer connected to
the attatched network.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.4 |
ospfIntfUnloopThe total number of times the interface, connected back to
the attatched network.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.5 |
ospfIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.6 |
ospfIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.7 |
ospfIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.3.1.8 |
ospfIntfErrorStatsThe table of OSPF Interface Error Statistics. SEQUENCE OF OspfIntfErrorStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4 |
ospfIntfErrorStatsEntryError Statistics for an OSPF area. OspfIntfErrorStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1 |
ospfIntfErrIndexThe index of the OSPF Intf for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.1 |
ospfIntfErrAuthFailureThe total number of packets received with a wrong password in
this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.2 |
ospfIntfErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.3 |
ospfIntfErrHelloMismatchThe total number of packets received with a different hello interval
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.4 |
ospfIntfErrDeadMismatchThe total number of packets received with a different dead interval
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.5 |
ospfIntfErrOptionsMismatchThe total number of packets received with a different options
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.6 |
ospfIntfErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.7 |
ospfIntfErrAreaMismatchThe total number of packets received with a wrong area.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.5.3.4.1.8 |
clearStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6 |
ipClearStatsSetting this to clear(1) results in clearing the IP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.1 |
vrrpClearStatsSetting this to clear(2) results in clearing the VRRP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.2 |
ripClearStatsSetting this to clear(1) results in clearing the RIP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.4 |
ospfClearStatsSetting this to clear(1) results in clearing the OSPF statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.5 |
tcpClearStatsSetting this to clear(1) results in clearing the TCP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.6 |
udpClearStatsSetting this to clear(1) results in clearing the UDP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.7 |
dnsClearStatsSetting this to clear(1) results in clearing the DNS statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.8 |
arpClearStatsSetting this to clear(1) results in clearing the ARP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.9 |
icmpClearStatsSetting this to clear(1) results in clearing the ICMP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.10 |
routeClearStatsSetting this to clear(1) results in clearing the Route statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.6.11 |
igmpStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7 |
igmpSnoopStatsThe table of OSPF Interface Error Statistics. SEQUENCE OF IgmpSnoopStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1 |
igmpSnoopStatsEntryStatistics for IGMP Snooping. IgmpSnoopStatsEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1 |
igmpSnoopVlanIndexThe index of the VLAN for which these statistics apply.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.1 |
rxIgmpValidPktsThe total number of valid IGMP packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.2 |
rxIgmpInvalidPktsThe total number of invalid IGMP packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.3 |
rxIgmpGenQueriesThe total number of IGMP General Query packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.4 |
rxIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.5 |
rxIgmpLeavesThe total number of IGMP Leave packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.6 |
rxIgmpReportsThe total number of IGMP Report packets received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.7 |
txIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets
transmitted on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.8 |
txIgmpReportsThe total number of IGMP Report packets transmitted
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.9 |
txIgmpLeavesThe total number of IGMP Leave packets transmitted
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.10 |
rxIgmpGroupSourceSpecificQueriesThe total number of IGMP Group Source Specific (GSSQ) Queries received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.11 |
rxIgmpV3CurrentStateRecordsThe total number of IGMP Current State Records (CSRs) received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.12 |
rxIgmpV3SourceListChangeRecordsThe total number of IGMP Source List Change Records (SLCRs) received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.13 |
rxIgmpV3FilterChangeRecordsThe total number of IGMP Filter Mode Change Records (FMCRs) received
on this VLAN.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.1.1.14 |
igmpClearAllStatsSetting this to clear(1) results in clearing the IGMP statistics.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.2 |
igmpStatsTotalIgmpGroupsThe total number of IGMP groups.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.3 |
igmpStatsTotalIpmcGroupsThe total number of IPMC groups.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.7.4 |
ipStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8 |
ipStatsInReceivesip InReceivero Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.1 |
ipStatsInHdrErrorsip InHdrErrorro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.2 |
ipStatsInAddrErrorsip InAddrErrorsro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.3 |
ipStatsInUnknownProtosip InUnknownProtosro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.4 |
ipStatsInDiscardsip InDiscardsro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.5 |
ipStatsInDeliversip InDeliversro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.6 |
ipStatsOutRequestsip OutRequestsro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.7 |
ipStatsOutDiscardsip OutDiscardsro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.8 |
ipStatsDefaultTTLip DefaultTTLro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.8.9 |
rip2Stats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13 |
ripStatInPacketsThe total number of RIP packets recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.1 |
ripStatOutPacketsThe total number of RIP packets transmitted.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.2 |
ripStatInRequestPktsThe total number of RIP requests recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.3 |
ripStatInResponsePktsThe total number of RIP response recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.4 |
ripStatOutRequestPktsThe total number of RIP requests transmitted.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.5 |
ripStatOutResponsePktsThe total number of RIP responses transmitted.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.6 |
ripStatRouteTimeoutThe total number of RIP route timeouts.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.7 |
ripStatInBadSizePktsThe total number of bad size RIP packets recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.8 |
ripStatInBadVersionThe total number of RIP bad versions recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.9 |
ripStatInBadZerosThe total number of RIP bad zeros recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.10 |
ripStatInBadSourcePortThe total number of RIP bad source port recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.11 |
ripStatInBadSourceIPThe total number of RIP bad source IP recieved.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.12 |
ripStatInSelfRcvPktsThe total number of RIP packets from self received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.13.13 |
dnsStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14 |
dnsStatInGoodDnsRequestsThe total number of good DNS request packets received.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14.1 |
dnsStatOutDnsRequestsThe total number of DNS request packetsro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14.2 |
dnsStatInBadDnsRequestsThe total number of bad DNS request packets receivedro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.14.3 |
geal3Stats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15 |
maxL3TableSizeMax L3 table sizero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.1 |
noL3EntriesUsedNumber of L3 entries usedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.2 |
maxLpmTableSizeMax LPM table sizero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.3 |
noLpmEntriesUsedNumber of LPM entries usedro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.4 |
maxBlockInLpmTableMax number of blocks in LPM tablero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.5 |
noBlocksUsedInLpmTableNumber of blocks used in LPM tablero Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.2.15.6 |
layer3Info OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3 |
ipRoutingInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1 |
ipRouteInfoTableThe table of run-time IP routes. SEQUENCE OF IpRouteInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1 |
ipRouteInfoEntryA row in the run-time IP route table IpRouteInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1 |
ipRouteInfoIndxThe index of this route table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.1 |
ipRouteInfoDestIpThe destination IP address of this route.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.2 |
ipRouteInfoMaskThe destination IP mask of this route.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.3 |
ipRouteInfoGatewayThe next-hop router address for this route.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.4 |
ipRouteInfoTagThe tag-type for this route.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.5 |
ipRouteInfoTypeThe type of the route.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.6 |
ipRouteInfoInterfaceThe interface number for which the destination address is applicable.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.7 |
ipRouteInfoMetricThe metric of this route.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.1.1.8 |
routeTableClearSetting this value to clear(2) clears the route table.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.1.2 |
arpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2 |
arpInfoTableThe table of ARP entries. SEQUENCE OF AgArpInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1 |
arpInfoEntryA row in the ARP table AgArpInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1 |
arpInfoDestIpThe destination IP address of the ARP entry.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.1 |
arpInfoMacAddrThe MAC address for the ARP entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.2 |
arpInfoVLANThe VLAN identifier for the ARP entry.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.3 |
arpInfoSrcPortThe port number on which this entry's equivalence is effective.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.4 |
arpInfoFlagThe flag associated with this ARP entry.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.1.1.6 |
arpCacheClearSetting this value to clear(2) clears the ARP cache.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.2.2 |
vrrpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3 |
vrrpInfoVirtRtrTableThe table of VRRP virtual router run-time information. SEQUENCE OF VrrpInfoVirtRtrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1 |
vrrpInfoVirtRtrTableEntryThe run-time information about a VRRP virtual router. VrrpInfoVirtRtrTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1 |
vrrpInfoVirtRtrIndexThe VRRP virtual router index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.1 |
vrrpInfoVirtRtrConfigThe status of the VRRP virtual router.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.2 |
vrrpInfoVirtRtrIDThe VRRP virtual router identifier.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.3 |
vrrpInfoVirtRtrAddrThe VRRP virtual router IP address.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.4 |
vrrpInfoVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.5 |
vrrpInfoVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.6 |
vrrpInfoVirtRtrStateThe VRRP virtual router state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.7 |
vrrpInfoVirtRtrOwnershipThe VRRP virtual router ownership status.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.3.1.1.8 |
ospfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4 |
ospfGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1 |
ospfVersionOSPF version.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.1 |
ospfRouterIDThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.2 |
ospfStartTimeThe time when ospf has been started.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.3 |
ospfProcessUptimeThe time since ospf has been started.ro Counter32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.4 |
ospfLsTypesSupportedThe Link State Types that are supported.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.5 |
ospfAreaBorderRouterArea Border Router Role.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.6 |
ospfAreaBoundaryRouterArea Boundary Router Role.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.7 |
ospfExternalLsaThe number of external LSAs.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.8 |
ospfIntfCountForRouterThe number of interfaces for this router.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.9 |
ospfVlinkCountForRouterThe number of virtual links for this router.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.10 |
ospfNewLsaReceivedThe number of new LSAs reveived.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.11 |
ospfTotalLsaOriginatedThe number of LSAs originated.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.12 |
ospfTotalNumberOfLsdbEntriesTotal number of entries in the Link State Database.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.13 |
ospfTotalNeighboursThe total number of OSPF neighbours.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.14 |
ospfNbrInInitStateThe number of neighbours in the initial state of exchange.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.15 |
ospfNbrInExchStateThe number of neighbours in the exchange state.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.16 |
ospfNbrInFullStateThe number of neighbours in the Full state of exchange.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.17 |
ospfTotalAreasThe Total number of areas.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.18 |
ospfTotalTransitAreasThe Total number of Transit areas.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.19 |
ospfTotalNssaAreasThe Total number of NSSA areas.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.20 |
ospfTotalStubAreasThe Total number of STUB areas.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.1.21 |
ospfAreaInfoTableThe table of OSPF Area information. SEQUENCE OF OspfAreaInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2 |
ospfAreaInfoEntryInformation about a OSPF area. OspfAreaInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1 |
ospfAreaInfoIndexThe OSPF area number for which the OSPF info table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.1 |
ospfAreaInfoIdThe IP address of the OSPF area.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.2 |
ospfAreaInfoStatusArea Status:
disabled(0), enabled(1).ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.3 |
ospfTotalNumberOfInterfacesThe total number of interfaces for this OSPF area.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.4 |
ospfNumberOfInterfacesUpThe number of interfaces UP in area.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.5 |
ospfAreaInfoAuthTypeType of authentication being used:
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.6 |
ospfAreaInfoSPFThe number of times SPF ran.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.7 |
ospfNumberOfLsdbEntriesThe number of Link State Database entries for this OSPF area.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.8 |
ospfAreaInfoAreaBorderRouterThe Area Border Router count.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.9 |
ospfAreaInfoASBoundaryRouterThe AS Boundary Router count.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.10 |
ospfAreaInfoTotalNeighboursThe total number of OSPF neighbors.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.11 |
ospfAreaInfoNeighborsINITstateTotal neighbors in INIT state.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.12 |
ospfAreaInfoNeighborsEXCHstateTotal neighbors in EXCH state.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.13 |
ospfAreaInfoNeighborsFULLstateTotal neighbors in FULL state.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.14 |
ospfAreaInfoLsTypesAcceptedLS types accepted by this area.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.2.1.15 |
ospfIntfInfoTableThe table of OSPF Interface information. SEQUENCE OF OspfIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3 |
ospfIntfInfoEntryInformation about a OSPF interface. OspfIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1 |
ospfIfInfoIndexThe OSPF interface number for which the OSPF info table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.1 |
ospfIfInfoIpAddressThe IP address of the OSPF interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.2 |
ospfIfInfoAreaThe index of the area that the interface belongs.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.3 |
ospfIfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.4 |
ospfIfInfoRouterIDThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.5 |
ospfIfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.6 |
ospfIfInfoPriorityInterface router priorityro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.7 |
ospfIfInfoDesignatedRouterIDThe OSPF Designated Router ID for this OSPF interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.8 |
ospfIfInfoDesignatedRouterIpAddressThe OSPF Designated Router IP Address for this OSPF interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.9 |
ospfIfInfoBackupDesignatedRouterIDThe OSPF Backup Designated Router ID for this OSPF
interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.10 |
ospfIfInfoBackupDesignatedRouterIpAddressThe OSPF Backup Designated Router Ip Address for this OSPF
interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.11 |
ospfIfInfoHelloThe hello timer for this OSPF interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.12 |
ospfIfInfoDeadThe dead timer for this OSPF interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.13 |
ospfIfInfoWaitThe OSPF Wait interval for this OSPF interface.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.14 |
ospfIfInfoRetransmitThe retransmit interval for this OSPF interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.15 |
ospfIfInfoTransitDelayThe transit delay for this OSPF interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.16 |
ospfIfInfoTotalNeighboursThe total number of neighbours for this OSPF interface.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.17 |
ospfIfInfoEventsThe total number of events for this OSPF interface.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.18 |
ospfIfInfoAuthTypeType of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.3.1.19 |
ospfVirtIntfInfoTableThe table of OSPF virtual interfaces information. SEQUENCE OF OspfVirtIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4 |
ospfVirtIntfInfoEntryInformation about an OSPF virtual interface. OspfVirtIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1 |
ospfVirtIntfInfoIndexThe OSPF Virtual Interface number for which this table is
related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.1 |
ospfVirtIntfInfoIpAddrThe IP Address of this virtual interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.2 |
ospfVirtIntfInfoAreaThe index of the OSPF area to which this virtual interface
belongs.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.3 |
ospfVirtIntfInfoRouterIdThe Router ID.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.4 |
ospfVirtIntfInfoStateState
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.5 |
ospfVirtIntfInfoCostThe cost of the virtual interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.6 |
ospfVirtIntfInfoTransThe transit delay for the virtual interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.7 |
ospfVirtIntfInfoHelloHello interval.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.8 |
ospfVirtIntfInfoDeadDead interval.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.9 |
ospfVirtIntfInfoWaitWait interval.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.10 |
ospfVirtIntfInfoRetraRetransmit interval.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.11 |
ospfVirtIntfInfoAuthAuthentication.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.12 |
ospfVirtIntfInfoEventsEvents.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.13 |
ospfVirtIntfInfoNbrThe IP Address of the OSPF neighbor for this virtual interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.14 |
ospfVirtIntfInfoNbrStateState
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.15 |
ospfVirtIntfInfoAreaIdThea AreaId of the virtual interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.4.1.16 |
ospfIfNbrTableThe table of OSPF Interface Neighbor information. SEQUENCE OF OspfIfNbrEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5 |
ospfIfNbrEntryInformation about a OSPF interface, neighbor pair. OspfIfNbrEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1 |
ospfIfNbrIntfIndexThe OSPF Interface number for which this Interface/Nbr table is
related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.1 |
ospfIfNbrIpAddrThe OSPF Neighbor ID .ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.2 |
ospfIfNbrPriorityThe priority of the OSPF neighbor.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.3 |
ospfIfNbrStateThe state of the OSPF neighbor.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.4 |
ospfIfNbrDesignatedRtrThe IP Address of the Designated Router for this OSPF Neighbor.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.5 |
ospfIfNbrBackupDesignatedRtrThe IP Address of the backup designated Router for this OSPF Neighbor.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.6 |
ospfIfNbrIpAddressThe IP Address of the OSPF Neighbor.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.5.1.7 |
ospfSumRangesInfoTableThe table of OSPF summary ranges information. SEQUENCE OF OspfSumRangesInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6 |
ospfSumRangesInfoEntrySummary ranges information. OspfSumRangesInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1 |
ospfSumRangesInfoIndexThe OSPF range index for which this table is
related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.1 |
ospfSumRangesInfoAreaArea.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.2 |
ospfSumRangesInfoNetworkNetwork.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.3 |
ospfSumRangesInfoMaskMask.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.4 |
ospfSumRangesInfoActionAction
propagate(0),
hide(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.5 |
ospfSumRangesInfoListTypeSummary address list
Non-NSSA(0),
NSSA(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.6.1.6 |
ospfRoutesInfoTableThe table of OSPF routes information. SEQUENCE OF OspfRoutesInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7 |
ospfRoutesInfoEntryOSPF routes information. OspfRoutesInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1 |
ospfRoutesInfoIndexThe OSPF route table entry index for which
this table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.1 |
ospfRoutesInfoDestinationDestination.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.2 |
ospfRoutesInfoMaskMask.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.3 |
ospfRoutesInfoViaNext hop.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.4 |
ospfRoutesInfoTypeRoute type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - bestro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.7.1.5 |
ospfLsdbInfoTableThe OSPF Process's Link State Database. SEQUENCE OF OspfLsdbInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8 |
ospfLsdbInfoEntryA single Link State Advertisement. OspfLsdbInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1 |
ospfLsdbInfoIndexThe 32 bit index in the table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.1 |
ospfLsdbInfoAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.2 |
ospfLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.3 |
ospfLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.4 |
ospfLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.5 |
ospfLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.6 |
ospfLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.7 |
ospfLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.8 |
ospfLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.8.1.9 |
ospfExtLsdbInfoTableThe OSPF Process's Links State Database. SEQUENCE OF OspfExtLsdbInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9 |
ospfExtLsdbInfoEntryA single Link State Advertisement. OspfExtLsdbInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1 |
ospfExtLsdbInfoIndexThe 32 bit index in the table.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.1 |
ospfExtLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.2 |
ospfExtLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.3 |
ospfExtLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.4 |
ospfExtLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement - displayed here in hexazecimal.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.5 |
ospfExtLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.6 |
ospfExtLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.7 |
ospfExtLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.4.9.1.8 |
igmpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5 |
igmpInfoTableThe table of IGMP group membership information. SEQUENCE OF IgmpInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1 |
igmpInfoEntryInformation about an IGMP group member . IgmpInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1 |
igmpInfoIndexThe igmp group number for which the IGMP info table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.1 |
igmpInfoGroupIdThe IP address of the IGMP group.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.2 |
igmpInfoVlanIdThe VLAN ID for this IGMP group.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.3 |
igmpInfoVersionThe Version of IGMP host.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.5 |
igmpInfoPortNumThe Version of IGMP host.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.6 |
igmpInfoExpiresThe expiration time for this host.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.7 |
igmpInfoModeThe IGMPv3 filter-mode for this host.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.8 |
igmpInfoSourceIpThe source IP address of the IGMP group.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.9 |
igmpInfoFwdThe IGMPv3 forwarding for this source/group IP for this host.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.1.1.10 |
igmpMrtrInfoTableThe table of IGMP mrouters. SEQUENCE OF IgmpMrtrInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2 |
igmpMrtrInfoEntryInformation about an IGMP mrouter. IgmpMrtrInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1 |
igmpMrtrInfoIndexThe mrouter number for which the IGMP mrouter info table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.1 |
igmpMrtrInfoVlanIdThe VLAN ID on which this IGMP mrouter is attached.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.2 |
igmpMrtrInfoPortIdThe port on which this IGMP mrouter is attached.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.3 |
igmpMrtrInfoVersionThe version of this IGMP mrouter.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.4 |
igmpMrtrInfoExpiresThe expiration time for this mrouter.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.5 |
igmpMrtrInfoMrtThe Maximum Query Response time of this IGMP mrouter.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.6 |
igmpMrtrInfoQrvThe Querier Robustness value of this IGMP mrouter.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.7 |
igmpMrtrInfoQqicThe Querier query interval code of this IGMP mrouter.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.5.2.1.8 |
rip2Info OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7 |
rip2GeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.1 |
ripInfoStateRIP global state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.1.1 |
ripInfoUpdatePeriodUpdate Period in seconds.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.1.2 |
rip2InfoIntfTableThe information table of RIP. SEQUENCE OF RipInfoIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2 |
ripInfoIntfEntryInformation about RIP on IP interface. RipInfoIntfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1 |
ripInfoIntfIndexThe interface number for which the RIP information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.1 |
ripInfoIntfVersionRIP version.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.2 |
ripInfoIntfAddressThe interface address.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.3 |
ripInfoIntfStateThe status of RIP protocol.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.4 |
ripInfoIntfListenThe status of listening to route updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.5 |
ripInfoIntfTrigUpdateThe status of triggered updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.6 |
ripInfoIntfMcastUpdateThe status of multicast updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.7 |
ripInfoIntfPoisonReverseThe status of RIP poison reverse.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.8 |
ripInfoIntfSupplyThe status of supplying route updates.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.9 |
ripInfoIntfMetricRIP route metric for this interface.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.10 |
ripInfoIntfAuthThe type of Authentication used on this interface.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.11 |
ripInfoIntfKeyRIP update authentication password.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.12 |
ripInfoIntfDefaultSpecifies what RIP does with default routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.7.2.1.13 |
ipInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8 |
ipInfoRouterIDRouter ID information.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.1 |
ipIntfInfoTableThe table of IP interface information. SEQUENCE OF IntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2 |
intfInfoEntryA row in IP interface information table. IntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1 |
intfInfoIndexThe interface number for which the information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.1 |
intfInfoAddrThe IP address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.2 |
intfInfoNetMaskThe subnet mask of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.3 |
intfInfoBcastAddrThe broadcast address of the interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.4 |
intfInfoVlanThe VLAN number for this interface.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.5 |
intfInfoStatusThe status of the interface.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.2.1.6 |
gatewayInfoTableThe table containing information for the default gateways. SEQUENCE OF GatewayInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3 |
gatewayInfoEntryA row in the gateway information table GatewayInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1 |
gatewayInfoIndexThe gateway number for which the information is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.1 |
gatewayInfoAddrThe IP address of the default gateway.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.2 |
gatewayInfoVlanThe VLAN number for this gateway (0 for any).ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.3 |
gatewayInfoStatusThe status of the default gateway.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.3.1.4 |
ipInfoBootpRelayStateThe state of BOOTP relay.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.4 |
ipInfoBootpRelayAddrThe IP address of BOOTP server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.5 |
ipInfoBootpRelayAddr2The IP address of second BOOTP server.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.6 |
ipInfoFwdStateIP forwarding global state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.7 |
ipInfoFwdDirectedBcastThe state of forwarding directed broadcasts.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.8 |
ipInfoNwfTableThe table of IP network filter information. SEQUENCE OF IpInfoNwfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9 |
ipInfoNwfEntryA row in the IP network filter information table. IpInfoNwfEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1 |
ipInfoNwfIndexThe netowrk filter number for which the NWF is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.1 |
ipInfoNwfAddrThe IP address of the network filter.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.2 |
ipInfoNwfMaskThe subnet mask of the network filter.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.3 |
ipInfoNwfStateThe state of the network filter.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.9.1.4 |
ipInfoRmapTableThe table of IP route map information. SEQUENCE OF IpInfoRmapEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10 |
ipInfoRmapEntryInformation about an IP route map. IpInfoRmapEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1 |
ipInfoRmapIndexThe route map number for which the RMAP is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.1 |
ipInfoRmapLpThe local-preference of the route map. 4294967295 means nonero Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.2 |
ipInfoRmapMetricThe metric of the route map. 4294967295 means nonero Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.3 |
ipInfoRmapPrecThe precedence of the route map.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.4 |
ipInfoRmapWeightThe weight of the route map. 65535 means nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.5 |
ipInfoRmapStateEnable or disable the route map.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.6 |
ipInfoRmapApThe as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.7 |
ipInfoRmapMetricTypeThe OSPF metric-type of the matched route.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.10.1.8 |
ipOspfInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11 |
ipOspfInfoStateOSPF global state.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.1 |
ipOspfInfoDefaultRouteMetricThe metric to be assigned.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.2 |
ipOspfInfoDefaultRouteMetricTypeThe AS External metric type to be assigned.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.3 |
ipOspfInfoRouterIDThe router ID of the switch.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.4 |
ipOspfInfoLsdbLimitThe LSDB limit for external LSA.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.5 |
ipOspfAreaInfoTableThe table of OSPF Area Information. SEQUENCE OF IpOspfAreaInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6 |
ipOspfAreaInfoEntryInformation about a OSPF area. IpOspfAreaInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1 |
ipOspfAreaInfoIndexThe OSPF area number for which the OSPF area table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.1 |
ipOspfAreaInfoIdThe IP Address of the OSPF area.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.2 |
ipOspfAreaInfoSpfIntervalThe SPF interval for the OSPF area.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.3 |
ipOspfAreaInfoAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.4 |
ipOspfAreaInfoTypeType of Area.
transit(0)
stub(1)
nssa(2)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.5 |
ipOspfAreaInfoMetricMetric (1-65535)ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.6 |
ipOspfAreaInfoStatusStatus
disabled(0)
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.6.1.7 |
ipOspfRangeInfoTableThe table of OSPF summary range information. SEQUENCE OF IpOspfRangeInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7 |
ipOspfRangeInfoEntryInformation about an OSPF summary range. IpOspfRangeInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1 |
ipOspfRangeInfoIndexThe range number for which the OSPF summary range table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.1 |
ipOspfRangeInfoAddrThe IP Address of the range.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.2 |
ipOspfRangeInfoMaskThe mask of the range.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.3 |
ipOspfRangeInfoAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.4 |
ipOspfRangeInfoHideStateThe state of the hide range.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.5 |
ipOspfRangeInfoStateThe state of the range.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.7.1.6 |
ipOspfIntfInfoTableThe table of OSPF Interface Information. SEQUENCE OF IpOspfIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8 |
ipOspfIntfInfoEntryInformation about an OSPF Interface. IpOspfIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1 |
ipOspfIntfInfoIndexThe OSPF Interface number for which the OSPF Interface table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.1 |
ipOspfIntfInfoIdThe IP Address of the OSPF interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.2 |
ipOspfIntfInfoAreaThe index of the area that the interface belongsro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.3 |
ipOspfIntfInfoMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.4 |
ipOspfIntfInfoCostInterface costro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.5 |
ipOspfIntfInfoPrioInterface router priorityro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.6 |
ipOspfIntfInfoHelloHello intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.7 |
ipOspfIntfInfoDeadDead intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.8 |
ipOspfIntfInfoTransTransit delayro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.9 |
ipOspfIntfInfoRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.10 |
ipOspfIntfInfoAuthKeyAuthentication Keyro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.11 |
ipOspfIntfInfoStatusStatus of the interface
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.8.1.12 |
ipOspfVirtIntfInfoTableThe table of OSPF Virtual Interface Information. SEQUENCE OF IpOspfVirtIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9 |
ipOspfVirtIntfInfoEntryInformation about an OSPF virtual Interface. IpOspfVirtIntfInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1 |
ipOspfVirtIntfInfoIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.1 |
ipOspfVirtIntfInfoAreaIdThe index of the OSPF area to which this virtual interface
belongs.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.2 |
ipOspfVirtIntfInfoNbrThe IP Address of the OSPF neighbor for this virtual interface.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.3 |
ipOspfVirtIntfInfoMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.4 |
ipOspfVirtIntfInfoHelloHello intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.5 |
ipOspfVirtIntfInfoDeadDead intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.6 |
ipOspfVirtIntfInfoTransTransit delayro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.7 |
ipOspfVirtIntfInfoRetraRetransmit intervalro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.8 |
ipOspfVirtIntfInfoAuthKeyAuthentication Keyro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.9 |
ipOspfVirtIntfInfoStatusStatus
disabled(0),
enabled(1)ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.9.1.10 |
ipOspfHostInfoTableThe table of OSPF Host Information. SEQUENCE OF IpOspfHostInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10 |
ipOspfHostInfoEntryInformation about a OSPF host. IpOspfHostInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1 |
ipOspfHostInfoIndexThe OSPF host number for which the OSPF host table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.1 |
ipOspfHostInfoIpAddrThe IP Address of the OSPF host.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.2 |
ipOspfHostInfoAreaIndexThe area index.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.3 |
ipOspfHostInfoCostThe cost of the corresponding host.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.4 |
ipOspfHostInfoStateEnable or disable an OSPF Hostro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.10.1.5 |
ipOspfRedistributeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11 |
ipOspfRedistributeStaticInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1 |
ipOspfRedistributeStaticInfoMetricThe metric to be assigned to static routes.
A value of 0 indicates none.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1.1 |
ipOspfRedistributeStaticInfoMetricTypeThe AS External metric type for static routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1.2 |
ipOspfRedistributeStaticInfoOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.1.3 |
ipOspfRedistributeFixedInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2 |
ipOspfRedistributeFixedInfoMetricThe export metric for fixed routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2.1 |
ipOspfRedistributeFixedInfoMetricTypeThe AS External metric type for fixed routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2.2 |
ipOspfRedistributeFixedInfoOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.2.3 |
ipOspfRedistributeRipInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3 |
ipOspfRedistributeRipInfoMetricThe export metric for RIP routes. A value of 0 indicates nonero INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3.1 |
ipOspfRedistributeRipInfoMetricTypeThe AS External metric type for RIP routes.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3.2 |
ipOspfRedistributeRipInfoOutRmapListThe route maps present in the out route map list.
The route maps are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ Rmap 9
|| ||
|| ||___ Rmap 8
|| |____ Rmap 7
|| . . .
||_________ Rmap 2
|__________ Rmap 1
where x : 1 - The represented route map is selected
0 - The represented route map is not selectedro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.11.3.3 |
ipOspfMd5keyInfoTableThe table of OSPF MD5 keys Information. SEQUENCE OF IpOspfMd5keyInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12 |
ipOspfMd5keyInfoEntryInformation about an OSPF MD keys table. IpOspfMd5keyInfoEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12.1 |
ipOspfMd5keyInfoIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12.1.1 |
ipOspfMd5keyInfoKeyThe character string representing the MD5 Key.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.3.8.11.12.1.2 |
layer3Oper OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4 |
vrrpOper OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1 |
vrrpOperVirtRtrTableAn entry in the table of virtual routers. SEQUENCE OF VrrpOperVirtRtrEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1 |
vrrpOperVirtRtrEntryA row in the vrrpOperVirtRtrTable VrrpOperVirtRtrEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1.1 |
vrrpOperVirtRtrIndexThe index for the VRRP virtual router.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1.1.1 |
vrrpOperVirtRtrBackupWhen set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object os read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.1.1.2 |
vrrpOperVirtRtrGroupBackupWhen set to a value of 'backup(2)' it forces the specified
master virtual router group into backup mode.
'ok(1)' is returned when the object os read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.3.4.1.2 |
bntTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7 |
bntSwDefGwUpA bntSwDefGwUp trap signifies that the default
gateway is alive. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.2 |
bntSwDefGwDownA bntSwDefGwDown trap signifies that the default
gateway is down. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.3 |
bntSwDefGwInServiceA bntSwDefGwEnabled trap signifies that the default
gateway is up and in service. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.4 |
bntSwDefGwNotInServiceA bntSwDefGwDisabled trap signifies that the default
gateway is alive but not in service. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.5 |
bntSwLoginFailureA bntSwLoginFailure trap signifies that someone failed to
enter a valid username/password combination. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.19 |
bntSwTempExceedThresholdA bntSwTempExceedThreshold trap signifies that the
switch temperature has exceeded maximum safety limits. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.22 |
bntSwApplyCompleteA bntSwApplyComplete signifies that new configuration
has been applied. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.27 |
bntSwSaveCompleteA bntSwApplyComplete signifies that new configuration
has been saved. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.28 |
bntSwFwDownloadSucessA bntSwFwDownloadSuccess signifies that firmware
has been downloaded to [image1|image2|boot image]. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.29 |
bntSwFwDownloadFailureA bntSwFwDownloadFailure signifies that firmware
downloaded failed to [image1|image2|boot image]. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.30 |
bntSwTempReturnThresholdA bntSwTempReturnThreshold trap signifies that the
switch temperature has returned below maximum safety limits. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.31 |
bntSwUfdfoLtMFailureA bntSwUfdfoLtMFailure trap signifies that a LtM link is down. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.34 |
bntSwUfdfoLtMUPA bntSwUfdfoLtMUP trap signifies that a LtM link is up. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.35 |
bntSwUfdfoGlobalEnaA bntSwUfdfoGlobalEna trap signifies that Global UFD is enabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.36 |
bntSwUfdfoGlobalDisA bntSwUfdfoGlobalDis trap signifies that Global UFD is disabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.37 |
bntSwUfdfoLtDAutoEnaA bntSwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.38 |
bntSwUfdfoLtDAutoDisA bntSwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.39 |
bntSwStgNewRootA bntSwStgNewRoot trap signifies that the bridge has become the new root of the STG. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.42 |
bntSwCistNewRootA bntSwCistNewRoot trap signifies that the bridge has become the new root of the CIST. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.43 |
bntSwStgTopologyChangedA bntSwStgTopologyChanged trap signifies that there was a STG topology change. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.44 |
bntSwCistTopologyChangedA bntSwCistTopologyChanged trap signifies that there was a CIST topology change. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.45 |
bntSFPInsertedA bntSFPInserted trap signifies that a SFP is inserted. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.51 |
bntSFPRemovedA bntSFPRemoved trap signifies that a SFP is removed. TRAP-TYPE .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.0.52 |
bntSwTrapDisplayStringTemporary string object used to store information being sent
in an BNT Switch trap.ro DisplayString .1.3.6.1.4.1.11.2.3.7.11.33.5.2.7.1000 |
qos OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8 |
qosConfigs OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1 |
qos8021p OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1 |
qosCurCfgPortPriorityTableThe table of QOS Port Priority configuration. SEQUENCE OF QoSCurCfgPortPriorityEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1 |
qosCurCfgPortPriorityEntryInformation about a particular QOS Port Priority configuration. QoSCurCfgPortPriorityEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1.1 |
qosCurCfgPortIndexSwitch Port Numberro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1.1.1 |
qosCurCfgPortPrioritySwitch Port Priority Should be between 0 and 7ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.1.1.2 |
qosNewCfgPortPriorityTableThe table of QOS Port Priority configuration. SEQUENCE OF QoSNewCfgPortPriorityEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2 |
qosNewCfgPortPriorityEntryInformation about a particular QOS Port Priority configuration. QoSNewCfgPortPriorityEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2.1 |
qosNewCfgPortIndexSwitch Port Numberro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2.1.1 |
qosNewCfgPortPrioritySwitch Port Priority Should be between 0 and 7rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.2.1.2 |
qosCurCfgPriorityCoSTableThe table of Frame Priority and COSq configuration. SEQUENCE OF QoSCurCfgPriorityCoSEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3 |
qosCurCfgPriorityCoSEntryInformation about a particular Frame Priority and COSq configuration. QoSCurCfgPriorityCoSEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3.1 |
qosCurCfgPriorityIndexFrame priority Numberro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3.1.1 |
qosCurCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.3.1.2 |
qosNewCfgPriorityCoSTableThe table of Frame Priority and COSq configuration. SEQUENCE OF QoSNewCfgPriorityCoSEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4 |
qosNewCfgPriorityCoSEntryInformation about a particular Frame Priority and COSq configuration. QoSNewCfgPriorityCoSEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4.1 |
qosNewCfgPriorityIndexFrame priority Numberro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4.1.1 |
qosNewCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.4.1.2 |
qosCurCfgCosWeightTableThe table of CoSq and Weight configuration. SEQUENCE OF QoSCurCfgCosWeightEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5 |
qosCurCfgCosWeightEntryInformation about a particular CoSq and Weight configuration. QoSCurCfgCosWeightEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5.1 |
qosCurCfgCosIndexCoSq Numberro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5.1.1 |
qosCurCfgCosWeightWeight of CoSqro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.5.1.2 |
qosNewCfgCosWeightTableThe table of CoSq and Weight configuration. SEQUENCE OF QoSNewCfgCosWeightEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6 |
qosNewCfgCosWeightEntryInformation about a particular CoSq and Weight configuration. QoSNewCfgCosWeightEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6.1 |
qosNewCfgCosIndexCoSq Numberro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6.1.1 |
qosNewCfgCosWeightWeight of CoSqrw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.6.1.2 |
qosCurCfgCosNumNumber of CoSq.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.7 |
qosNewCfgCosNumNumber of CoSq.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.8 |
qosDefaultCfgLoad default configuration.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.1.1.9 |
qosStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.2 |
qosInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.3 |
qosOper OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.8.4 |
acl OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9 |
acConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1 |
acList OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1 |
aclCurCfgTableThe table of current ACL configuration. SEQUENCE OF AclCurCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1 |
aclCurCfgEntryCurrent information about a particular ACL configuration entry. AclCurCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1 |
aclCurCfgIndexThe index associated with this ACL entry. Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.1 |
aclCurCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.3 |
aclCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.4 |
aclCurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this ACL entry.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.5 |
aclCurCfgEthFmtThe packet ethernet format to be filtered.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.6 |
aclCurCfgTagFmtThe packet tag format to be filtered.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.7 |
aclCurCfgIPFmtThe packet IP format to be filtered.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.8 |
aclCurCfgSrcMACAddressThe source MAC address to be filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.9 |
aclCurCfgSrcMACMaskThe address mask applied to aclCurCfgSrcMACAddress for filtering.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.10 |
aclCurCfgDstMACAddressThe destination MAC address to be filtered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.11 |
aclCurCfgDstMACMaskThe address mask applied to aclCurCfgDstMACAddress for filtering.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.12 |
aclCurCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.13 |
aclCurCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.14 |
aclCurCfgVLanIdThe virtual LAN identifier to be filtered.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.15 |
aclCurCfgVLanMaskThe mask applied to aclCurCfgVLanId for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.16 |
aclCurCfg8021pPriorityThe 802.1p priority to be filtered.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.17 |
aclCurCfgTypeOfServiceThe type of service to be filtered.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.18 |
aclCurCfgProtocolThe protocol to be filtered.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.19 |
aclCurCfgSrcIPAddressThe source IP address to be filtered.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.20 |
aclCurCfgSrcIPMaskThe address mask applied to aclCurCfgSrcIPAddress for filtering.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.21 |
aclCurCfgDstIPAddressThe destination IP address to be filtered.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.22 |
aclCurCfgDstIPMaskThe address mask applied to aclCurCfgDstIPAddress for filtering.ro IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.23 |
aclCurCfgSrcPortThe source TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.24 |
aclCurCfgSrcPortMaskThe mask applied to aclCurCfgSrcPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.25 |
aclCurCfgDstPortThe destination TCP/UDP port number to be filtered.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.26 |
aclCurCfgDstPortMaskThe mask applied to aclCurCfgDstPort for filtering.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.27 |
aclCurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.28 |
aclCurCfgEgressPortsThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.29 |
aclCurCfgStatisticsWhether statistics collection for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.30 |
aclCurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;ro Bits .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.39 |
aclCurCfgMeterActionMeter Action for this ACL.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.41 |
aclCurCfgMeterEnableMeter state for this ACL.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.42 |
aclCurCfgKbitsSecThe commited rate of meter associated with this ACL entry.ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.43 |
aclCurCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.44 |
aclCurCfgInprofUserSet in profile user defined priority for this ACL.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.45 |
aclCurCfgInprofDscpSet in profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.46 |
aclCurCfgInprofTosTo enable/disable setting in profile pkts based on TOS bits.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.47 |
aclCurCfgOutprofDscpSet out profile pkts DSCP value.ro INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.48 |
aclCurCfgInprofUserEnableSet in profile update method for this ACL.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.49 |
aclCurCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.50 |
aclCurCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.ro Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.1.1.51 |
aclNewCfgTableThe table of new ACL configuration. SEQUENCE OF AclNewCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2 |
aclNewCfgEntryNew information about a particular ACL configuration. AclNewCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1 |
aclNewCfgIndexThe index associated with this ACL entry.ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.1 |
aclNewCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.3 |
aclNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.4 |
aclNewCfgFilterActionSetPrioThe COS queue to be used when the action for this ACL entry is
set to setprio.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.5 |
aclNewCfgEthFmtThe packet ethernet format to be filtered.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.6 |
aclNewCfgTagFmtThe packet tagging format to be filtered.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.7 |
aclNewCfgIPFmtThe packet IP format to be filtered.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.8 |
aclNewCfgSrcMACAddressThe source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.9 |
aclNewCfgSrcMACMaskThe address mask to be applied to aclNewCfgSrcMACAddress
for filtering.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.10 |
aclNewCfgDstMACAddressThe destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.11 |
aclNewCfgDstMACMaskThe address mask to be applied to aclNewCfgDstMACAddress
for filtering.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.12 |
aclNewCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7), the value of
the aclNewCfgEthernetTypeValue object is automatically set,
as follows:
aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue
none(0) 0
arp(1) 2054 (0x0806)
ipv4(2) 2048 (0x0800)
ipv6(3) 34525 (0x86dd)
mpls(4) 34887 (0x8847)
rarp(5) 32821 (0x8035)
any(6) 65535 (0xffff)rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.13 |
aclNewCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined value for this object.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.14 |
aclNewCfgVLanIdThe virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.15 |
aclNewCfgVLanMaskThe mask to be applied to aclNewCfgVLanId for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.16 |
aclNewCfg8021pPriorityThe 802.1p priority to be filtered.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.17 |
aclNewCfgTypeOfServiceThe type of service to be filtered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.18 |
aclNewCfgProtocolThe protocol to be filtered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.19 |
aclNewCfgSrcIPAddressThe source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.20 |
aclNewCfgSrcIPMaskThe address mask to be applied to aclNewCfgSrcIPAddress
for filtering.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.21 |
aclNewCfgDstIPAddressThe destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.22 |
aclNewCfgDstIPMaskThe address mask to be applied to aclNewCfgDstIPAddress for filtering.rw IpAddress .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.23 |
aclNewCfgSrcPortThe source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.24 |
aclNewCfgSrcPortMaskThe mask to be applied to aclNewCfgSrcPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.25 |
aclNewCfgDstPortThe destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.26 |
aclNewCfgDstPortMaskThe mask to be applied to aclNewCfgDstPort for filtering.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.27 |
aclNewCfgTCPFlagsThe TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;rw Bits .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.28 |
aclNewCfgEgressPortsThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
|| ||
|| ||___ port 8
|| |____ port 7
|| . . .
||_________ port 2
|__________ port 1
where x:
1 - the represented port is configured for filtering.
0 - the represented port is not configured for filtering.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.29 |
aclNewCfgStatisticsWhether statistics collection for this ACL is enabled or not.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.30 |
aclNewCfgAddEgressPortThe port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.31 |
aclNewCfgRemoveEgressPortThe port to be removed from the specified ACL. A value of zero
is always returned when this object is read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.32 |
aclNewCfgDeleteThis is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.33 |
aclNewCfgTCPFlagsMaskThe TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)
where:
- reserved1 - 0;
- reserved2 - 0;
- x - 0 or 1;
Default value is 0x3f.rw Bits .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.39 |
aclNewCfgMeterActionMeter Action for this ACL.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.41 |
aclNewCfgMeterEnableMeter state for this ACL.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.42 |
aclNewCfgKbitsSecThe commited rate of meter associated with this ACL entry.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.43 |
aclNewCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.44 |
aclNewCfgInprofUserSet in profile user defined priority for this ACL.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.45 |
aclNewCfgInprofDscpSet in profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.46 |
aclNewCfgInprofTosTo enable/disable setting in profile pkts based on TOS bits.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.47 |
aclNewCfgOutprofDscpSet out profile pkts DSCP value.rw INTEGER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.48 |
aclNewCfgInprofUserEnableSet in profile update method for this ACL.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.49 |
aclNewCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.50 |
aclNewCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.51 |
aclNewCfgResetThis is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.52 |
aclNewCfgEthernetResetThis is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.53 |
aclNewCfgIpv4ResetThis is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.54 |
aclNewCfgTcpudpResetThis is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.55 |
aclNewCfgMeterResetThis is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.56 |
aclNewCfgRemarkResetThis is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.57 |
aclNewCfgRemarkInprofResetThis is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.58 |
aclNewCfgRemarkOutprofResetThis is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.59 |
aclNewCfgPktfmtResetThis is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.1.2.1.60 |
aclGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3 |
aclGroupCurCfgTableThe table of current ACL Group configuration. SEQUENCE OF AclGroupCurCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1 |
aclGroupCurCfgEntryInformation about a particular ACL configuration. AclGroupCurCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1.1 |
aclGroupCurCfgIndexThe index associated with this ACL Group entry.ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1.1.1 |
aclGroupCurCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.1.1.2 |
aclGroupNewCfgTableThe table of new ACL Group configuration. SEQUENCE OF AclGroupNewCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2 |
aclGroupNewCfgEntryNew information about a particular ACL configuration. AclGroupNewCfgEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1 |
aclGroupNewCfgIndexThe index associated with this ACL Group entry.ro Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.1 |
aclGroupNewCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| |____ ACL 7
|| . . .
||_________ ACL 2
|__________ ACL 1
where x:
1 - the represented ACL is a member of the group.
0 - the represented ACL is not a member of the group.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.2 |
aclGroupNewCfgAddAclThe index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.4 |
aclGroupNewCfgRemoveAclThe index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always returned when this object
is read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.5 |
aclGroupNewCfgDeleteThis is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read.rw Enumeration .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.3.2.1.8 |
aclCfg OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4 |
aclCurCfgPortTableThe table of port acl groups configuration. SEQUENCE OF AclCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1 |
aclCurCfgPortTableEntryInformation about a particular port acl configuration. AclCurCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1 |
aclCurCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1.1 |
aclCurCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1.2 |
aclCurCfgPortAclGrpBmapThe acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.1.1.4 |
aclNewCfgPortTableThe table of port acl configuration. SEQUENCE OF AclNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2 |
aclNewCfgPortTableEntryInformation about a particular port acl groups configuration. AclNewCfgPortTableEntry .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1 |
aclNewCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.1 |
aclNewCfgPortAddAclThe acl to be added to the specified port. A
'0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.2 |
aclNewCfgPortAddAclGrpThe acl group to be added to the specified port. A
'0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.4 |
aclNewCfgPortRemoveAclThe acl to be removed from the specified port.
A '0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.5 |
aclNewCfgPortRemoveAclGrpThe acl group to be removed from the specified port.
A '0' value is returned when read.rw Unsigned32 .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.7 |
aclNewCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ acl 9
|| ||
|| ||___ acl 8
|| |____ acl 7
|| . . .
||_________ acl 2
|__________ acl 1
where x : 1 - The represented acl applied to the port.
0 - The represented acl not applied to the port.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.8 |
aclNewCfgPortAclGrpBmapThe acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ aclgrp 9
|| ||
|| ||___ aclgrp 8
|| |____ aclgrp 7
|| . . .
||_________ aclgrp 2
|__________ aclgrp 1
where x : 1 - The represented acl group applied to the port.
0 - The represented acl group not applied to the port.ro OCTET STRING .1.3.6.1.4.1.11.2.3.7.11.33.5.2.9.1.4.2.1.10 |