HPN-ICF-IPSEC-MONITOR-MIB
The MIB is designed to get statistic information of IPSec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
Main OID:
hpnicfIPSecMonitor.1.3.6.1.4.1.11.2.14.11.15.2.7
125
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
125 total| Object Name |
|---|
hpnicfIPSecMonitorThe MIB is designed to get statistic information of
IPSec tunnels. With this MIB, we can get information of a certain
tunnel or all tunnels. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.7 |
hpnicfIPSecObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.1 |
hpnicfIPSecTunnelTableThe IPSec Phase-2 Tunnel Table. There is one
entry in this table for each active IPSec Phase-2 Tunnel. SEQUENCE OF HpnicfIPSecTunnelEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1 |
hpnicfIPSecTunnelEntryInformation about hpnicfIPSecTunnelTable. HpnicfIPSecTunnelEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1 |
hpnicfIPSecTunIfIndexThe interface index( the ifIndex of ifTable ). Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.1 |
hpnicfIPSecTunEntryIndexThe index of IPSec policy applied in the interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.2 |
hpnicfIPSecTunIndexThe index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2,147,483,647. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.3 |
hpnicfIPSecTunIKETunnelIndexThe index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.4 |
hpnicfIPSecTunLocalAddrThe IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.5 |
hpnicfIPSecTunRemoteAddrThe IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.6 |
hpnicfIPSecTunKeyTypeThe key negotiate mode used by the IPSec Phase-2 Tunnel.ro HpnicfIPSecNegoType .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.7 |
hpnicfIPSecTunEncapModeThe encapsulation mode used by the IPSec Phase-2 Tunnel.ro HpnicfEncapMode .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.8 |
hpnicfIPSecTunInitiatorThe initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.9 |
hpnicfIPSecTunLifeSizeThe negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.10 |
hpnicfIPSecTunLifeTimeThe negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.11 |
hpnicfIPSecTunRemainTimeThe remain time of SA in seconds. 2147483647 is defined as invalid
value.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.12 |
hpnicfIPSecTunActiveTimeThe duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.13 |
hpnicfIPSecTunRemainSizeThe remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.14 |
hpnicfIPSecTunTotalRefreshesThe total number of security association refreshing performed.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.15 |
hpnicfIPSecTunCurrentSaInstancesThe number of security associations which are currently active
or expiring.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.16 |
hpnicfIPSecTunInSaEncryptAlgoThe encryption algorithm used by the inbound security association
of the IPSec Phase-2 Tunnel.ro HpnicfEncryptAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.17 |
hpnicfIPSecTunInSaAhAuthAlgoThe authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel.ro HpnicfAuthAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.18 |
hpnicfIPSecTunInSaEspAuthAlgoThe authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.ro HpnicfAuthAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.19 |
hpnicfIPSecTunDiffHellmanGrpThe Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel.ro HpnicfDiffHellmanGrp .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.20 |
hpnicfIPSecTunOutSaEncryptAlgoThe encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel.ro HpnicfEncryptAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.21 |
hpnicfIPSecTunOutSaAhAuthAlgoThe authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel.ro HpnicfAuthAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.22 |
hpnicfIPSecTunOutSaEspAuthAlgoThe authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.ro HpnicfAuthAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.23 |
hpnicfIPSecTunPolicyNameThe policy name used by this IPSec tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.24 |
hpnicfIPSecTunPolicyNumThe sequence number of policy used by this IPSec tunnel.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.25 |
hpnicfIPSecTunStatusThe status of the IPSec Tunnel.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.7.1.1.1.26 |
hpnicfIPSecTunnelStatTableThe IPSec Phase-2 Tunnel Statistics Table. SEQUENCE OF HpnicfIPSecTunnelStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2 |
hpnicfIPSecTunnelStatEntryInformation about hpnicfIPSecTunnelStatTable. HpnicfIPSecTunnelStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1 |
hpnicfIPSecTunInOctetsThe total number of octets received by this IPSec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.1 |
hpnicfIPSecTunInDecompOctetsThe total number of decompressed octets received by this IPSec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.2 |
hpnicfIPSecTunInPktsThe total number of packets received by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.3 |
hpnicfIPSecTunInDropPktsThe total number of packets dropped during receiving process
by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.4 |
hpnicfIPSecTunInReplayDropPktsThe total number of packets dropped during
receiving process due to Anti-Replay process
by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.5 |
hpnicfIPSecTunInAuthFailsThe total number of inbound authentication's
which ended in failure by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.6 |
hpnicfIPSecTunInDecryptFailsThe total number of inbound decryption's
which ended in failure by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.7 |
hpnicfIPSecTunOutOctetsThe total number of octets sent by this IPSec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.8 |
hpnicfIPSecTunOutUncompOctetsThe total number of uncompressed octets sent by this IPSec Phase-2
Tunnel.This value is accumulated BEFORE the packet is compressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.9 |
hpnicfIPSecTunOutPktsThe total number of packets sent by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.10 |
hpnicfIPSecTunOutDropPktsThe total number of packets dropped during sending process
by this IPSec Phase-2 Tunnel.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.11 |
hpnicfIPSecTunOutEncryptFailsThe total number of outbound encryption's which ended in failure
by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.12 |
hpnicfIPSecTunNoMemoryDropPktsThe total number of packets dropped due to no enough memory by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.13 |
hpnicfIPSecTunQueueFullDropPktsThe total number of packets dropped due to queue full by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.14 |
hpnicfIPSecTunInvalidLenDropPktsThe total number of packets dropped due to invalid length packet
by this IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.15 |
hpnicfIPSecTunTooLongDropPktsThe total number of packets dropped due to too long packet by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.16 |
hpnicfIPSecTunInvalidSaDropPktsThe total number of packets dropped due to invalid SA by this
IPSec Phase-2 Tunnel.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.2.1.17 |
hpnicfIPSecSaTableThe IPSec Phase-2 Security Protection Index Table. This table
contains an entry for each active and expiring security association. SEQUENCE OF HpnicfIPSecSaEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3 |
hpnicfIPSecSaEntryInformation about hpnicfIPSecSaTable. HpnicfIPSecSaEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1 |
hpnicfIPSecSaIndexThe number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPSec Phase-2 Tunnel. The value of this object will
wrap at 2,147,483,647. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.1 |
hpnicfIPSecSaDirectionThe direction of the SA.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.2 |
hpnicfIPSecSaValueThe value of the SPI.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.3 |
hpnicfIPSecSaProtocolThe security protocol of the SA.ro HpnicfSaProtocol .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.4 |
hpnicfIPSecSaEncryptAlgoThe encryption algorithm used by the security association
of the IPSec Phase-2 Tunnel.ro HpnicfEncryptAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.5 |
hpnicfIPSecSaAuthAlgoThe authentication algorithm used by the SA.ro HpnicfAuthAlgo .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.6 |
hpnicfIPSecSaStatusThe status of the SA.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.7.1.3.1.7 |
hpnicfIPSecTrafficTableThe IPSec Phase-2 Tunnel Traffic Table. SEQUENCE OF HpnicfIPSecTrafficEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4 |
hpnicfIPSecTrafficEntryInformation about hpnicfIPSecTrafficTable. HpnicfIPSecTrafficEntry .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1 |
hpnicfIPSecTrafficLocalTypeThe type of local peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.ro HpnicfTrafficType .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.1 |
hpnicfIPSecTrafficLocalAddr1The first specification of local peer's IP address. If
the local peer type is single IP address, then this is the
value of the IP address. If the local peer type is IP subnet,
then this is the value of the subnet. If the local peer type
is IP address range, then this is the value of beginning IP
address of the range.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.2 |
hpnicfIPSecTrafficLocalAddr2The second specification of local peer's IP address. If the local
peer type is single IP address, then this is the value of the
IP address. If the local peer type is IP subnet, then this is
the value of the subnet mask. If the local peer type is IP
address range, then this is the value of ending IP address of
the range.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.3 |
hpnicfIPSecTrafficLocalProtocolThe protocol number of the local peer's traffic.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.4 |
hpnicfIPSecTrafficLocalPortThe port number of the local peer's traffic.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.5 |
hpnicfIPSecTrafficRemoteTypeThe type of remote peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.ro HpnicfTrafficType .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.6 |
hpnicfIPSecTrafficRemoteAddr1The first specification of remote peer's IP address.
If the remote peer type is single IP address, then
this is the value of the IP address. If the remote
peer type is IP subnet, then this is the value
of the subnet. If the remote peer type is IP
address range, then this is the value of beginning
IP address of the range.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.7 |
hpnicfIPSecTrafficRemoteAddr2Single IP address, then this is the value of the IP
address. If the remote peer type is IP subnet,
then this is the value of the subnet mask. If the
remote peer type is IP address range, then this
is the value of ending IP address of the range.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.8 |
hpnicfIPSecTrafficRemoteProtocolThe protocol number of the remote peer's traffic.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.9 |
hpnicfIPSecTrafficRemotePortThe port number of the remote peer's traffic.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.4.1.10 |
hpnicfIPSecGlobalStats OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5 |
hpnicfIPSecGlobalActiveTunnelsThe total number of currently active IPSec Phase-2 Tunnels.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.1 |
hpnicfIPSecGlobalActiveSasThe total number of currently active or expiring IPSec Phase-2 SA.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.2 |
hpnicfIPSecGlobalInOctetsThe total number of octets received by all current and previous
IPSec Phase-2 Tunnels. This value is accumulated BEFORE determining
whether or not the packet should be decompressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.3 |
hpnicfIPSecGlobalInDecompOctetsThe total number of decompressed octets received by all current
and previous IPSec Phase-2 Tunnels. This value is accumulated
AFTER the packet is decompressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.4 |
hpnicfIPSecGlobalInPktsThe total number of packets received by all current and
previous IPSec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.5 |
hpnicfIPSecGlobalInDropsThe total number of packets dropped during receiving
process by all current and previous IPSec Phase-2
Tunnels.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.6 |
hpnicfIPSecGlobalInReplayDropsThe total number of packets dropped during receiving
process due to Anti-Replay process by all
current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.7 |
hpnicfIPSecGlobalInAuthFailsThe total number of inbound authentication's which ended
in failure by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.8 |
hpnicfIPSecGlobalInDecryptFailsThe total number of inbound decryption's which ended in
failure by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.9 |
hpnicfIPSecGlobalOutOctetsThe total number of octets sent by all current and previous
IPSec Phase-2 Tunnels. This value is accumulated AFTER
determining whether or not the packet should be compressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.10 |
hpnicfIPSecGlobalOutUncompOctetsThe total number of uncompressed octets sent by all current
and previous IPSec Phase-2 Tunnels. This value is accumulated
BEFORE the packet is compressed.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.11 |
hpnicfIPSecGlobalOutPktsThe total number of packets sent by all current and previous
IPSec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.12 |
hpnicfIPSecGlobalOutDropsThe total number of packets dropped during sending process
by all current and previous IPSec Phase-2 Tunnels.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.13 |
hpnicfIPSecGlobalOutEncryptFailsThe total number of outbound encryption's which ended in failure
by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.14 |
hpnicfIPSecGlobalNoMemoryDropPktsThe total number of packets dropped due to no enough memory
by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.15 |
hpnicfIPSecGlobalNoFindSaDropPktsThe total number of packets dropped due to not find SA by
all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.16 |
hpnicfIPSecGlobalQueueFullDropPktsThe total number of packets dropped due to queue full by
all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.17 |
hpnicfIPSecGlobalInvalidLenDropPktsThe total number of packets dropped due to invalid packet
length by all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.18 |
hpnicfIPSecGlobalTooLongDropPktsThe total number of packets dropped due to too long packet by
all current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.19 |
hpnicfIPSecGlobalInvalidSaDropPktsThe total number of packets dropped due to invalid SA by all
current and previous IPSec Phase-2 Tunnels.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.5.20 |
hpnicfIPSecTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.1.6 |
hpnicfIPSecPolicyNameThe IPSec policy name with a trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.1 |
hpnicfIPSecPolicySeqNumThe IPSec policy sequence number with a trap.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.2 |
hpnicfIPSecPolicySizeThe number of IPSec policies with a trap.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.3 |
hpnicfIPSecSpiValueThe SPI value associated with a trap.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.7.1.6.4 |
hpnicfIPSecTrapCntl OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7 |
hpnicfIPSecTrapGlobalCntlIndicates whether all IPSec traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.1 |
hpnicfIPSecTunnelStartTrapCntlIndicates whether hpnicfIPSecTunnelStart traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.2 |
hpnicfIPSecTunnelStopTrapCntlIndicates whether hpnicfIPSecTunnelStop traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.3 |
hpnicfIPSecNoSaTrapCntlIndicates whether hpnicfIPSecNoSaFailure traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.4 |
hpnicfIPSecAuthFailureTrapCntlIndicates whether hpnicfIPSecAuthFailFailure traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.5 |
hpnicfIPSecEncryFailureTrapCntlIndicates whether hpnicfIPSecEncryFailFailure traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.6 |
hpnicfIPSecDecryFailureTrapCntlIndicates whether hpnicfIPSecDecryFailFailure traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.7 |
hpnicfIPSecInvalidSaTrapCntlIndicates whether hpnicfIPSec Invalid Sa Failure traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.8 |
hpnicfIPSecPolicyAddTrapCntlIndicates whether hpnicfIPSecPolicyAdd traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.9 |
hpnicfIPSecPolicyDelTrapCntlIndicates whether hpnicfIPSecPolicyDel traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.10 |
hpnicfIPSecPolicyAttachTrapCntlIndicates whether hpnicfIPSecPolicyAttach traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.11 |
hpnicfIPSecPolicyDetachTrapCntlIndicates whether hpnicfIPSecPolicyDetach traps should be generated.rw HpnicfTrapStatus .1.3.6.1.4.1.11.2.14.11.15.2.7.1.7.12 |
hpnicfIPSecTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8 |
hpnicfIPSecNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1 |
hpnicfIPSecTunnelStartThis notification is generated when an IPSec Phase-2
Tunnel is created. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.1 |
hpnicfIPSecTunnelStopThis notification is generated when an IPSec Phase-2
Tunnel is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.2 |
hpnicfIPSecNoSaFailureThis notification is generated when an IPSec Phase-2
non-existent SA error occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.3 |
hpnicfIPSecAuthFailFailureThis notification is generated when the IPSec phase-2
authentication failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.4 |
hpnicfIPSecEncryFailFailureThis notification is generated when the IPSec phase-2
tunnel has an encrypting failure. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.5 |
hpnicfIPSecDecryFailFailureThis notification is generated when the IPSec phase-2
tunnel has a decrypting failure. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.6 |
hpnicfIPSecInvalidSaFailureThis notification is generated when the IPSec phase-2
invalid SA failure occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.7 |
hpnicfIPSecPolicyAddThis notification is generated when an IPSec policy is added. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.8 |
hpnicfIPSecPolicyDelThis notification is generated when an IPSec policy is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.9 |
hpnicfIPSecPolicyAttachThis notification is generated when an IPSec policy is attached
with one interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.10 |
hpnicfIPSecPolicyDetachThis notification is generated when an IPSec policy is detached
with one interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.7.1.8.1.11 |
hpnicfIPSecConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.2 |
hpnicfIPSecCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.2.1 |
hpnicfIPSecGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.7.2.2 |