HPN-ICF-LswQos-MIB
AI MIB Summary
The HPN-ICF-LswQos-MIB module enables monitoring and configuration of Quality of Service (QoS) policies and Access Control List (ACL) rules on Hewlett Packard Enterprise (HPE) ProCurve and Aruba Layer 2/3 switches. It provides visibility into traffic classification, queue management, packet dropping statistics, and policy enforcement states to ensure network bandwidth prioritization and security compliance.
Module node for qos and acl.
Main OID:
hpnicfLswQosAclMib.1.3.6.1.4.1.11.2.14.11.15.8.35.16
370
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
370 total| Object Name |
|---|
hpnicfLswQosAclMibModule node for qos and acl. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.16 |
hpnicfLswQosMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2 |
hpnicfPriorityTrustModePriority type of inbound queue.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.1 |
hpnicfPortMonitorBothIfIndexThe ifIndex of in/out monitor port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.2 |
hpnicfQueueTableQueue table which contains queue entry. SEQUENCE OF HpnicfQueueEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3 |
hpnicfQueueEntryThe configuration information of queue. HpnicfQueueEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1 |
hpnicfQueueIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.1 |
hpnicfQueueScheduleModeThe mode of the queue schedule.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.2 |
hpnicfQueueWeight1If queue mode is wfq, then hpnicfQueueWeight1 represent the bandwidth of queue 1. If queue mode is wrr, then hpnicfQueueWeight1 represent the weight of queue 1.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.3 |
hpnicfQueueWeight2If queue mode is wfq, then hpnicfQueueWeight2 represent the bandwidth of queue 2. If queue mode is wrr, then hpnicfQueueWeight2 represent the weight of queue 2.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.4 |
hpnicfQueueWeight3If queue mode is wfq, then hpnicfQueueWeight3 represent the bandwidth of queue 3. If queue mode is wrr, then hpnicfQueueWeight3 represent the weight of queue 3.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.5 |
hpnicfQueueWeight4If queue mode is wfq, then hpnicfQueueWeight4 represent the bandwidth of queue 4. If queue mode is wrr, then hpnicfQueueWeight4 represent the weight of queue 4.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.6 |
hpnicfQueueMaxDelayrw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.7 |
hpnicfQueueWeight5If queue mode is wfq, then hpnicfQueueWeight5 represent the bandwidth of queue 5. If queue mode is wrr, then hpnicfQueueWeight5 represent the weight of queue 5.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.8 |
hpnicfQueueWeight6If queue mode is wfq, then hpnicfQueueWeight6 represent the bandwidth of queue 6. If queue mode is wrr, then hpnicfQueueWeight6 represent the weight of queue 6.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.9 |
hpnicfQueueWeight7If queue mode is wfq, then hpnicfQueueWeight7 represent the bandwidth of queue 7. If queue mode is wrr, then hpnicfQueueWeight7 represent the weight of queue 7.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.10 |
hpnicfQueueWeight8If queue mode is wfq, then hpnicfQueueWeight8 represent the bandwidth of queue 8. If queue mode is wrr, then hpnicfQueueWeight8 represent the weight of queue 8.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.3.1.11 |
hpnicfRateLimitTableRate limit table which contains limit entry. SEQUENCE OF HpnicfRateLimitEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4 |
hpnicfRateLimitEntryThe configuration information of the rate-limited port. HpnicfRateLimitEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1 |
hpnicfRateLimitAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.1 |
hpnicfRateLimitIfIndexifIndex of the rate-limited port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.2 |
hpnicfRateLimitVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.3 |
hpnicfRateLimitDirectionDirection of the rate-limited port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.4 |
hpnicfRateLimitUserAclNumThe number of user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.5 |
hpnicfRateLimitUserAclRuleThe number of user acl-rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.6 |
hpnicfRateLimitIpAclNumThe number of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.7 |
hpnicfRateLimitIpAclRuleThe number of Ip acl-rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.8 |
hpnicfRateLimitLinkAclNumThe number of link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.9 |
hpnicfRateLimitLinkAclRuleThe number of link acl-rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.10 |
hpnicfRateLimitTargetRateMbpsTarget rate: Mbps.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.11 |
hpnicfRateLimitTargetRateKbpsTarget rate: Kbps.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.12 |
hpnicfRateLimitPeakRatePeak rate of the rate-limited port.rw INTEGER(0|64..8388608) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.13 |
hpnicfRateLimitCIRCIR of the rate-limited port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.14 |
hpnicfRateLimitCBSBurst traffic of the rate-limited port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.15 |
hpnicfRateLimitEBSExcess burst traffic of the rate-limited port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.16 |
hpnicfRateLimitPIRPIR of the rate-limited port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.17 |
hpnicfRateLimitConformLocalPreConform local pre.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.18 |
hpnicfRateLimitConformActionTypeConform action type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.19 |
hpnicfRateLimitExceedActionTypeExceed action type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.20 |
hpnicfRateLimitExceedDscpExceed DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw INTEGER(0..63|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.21 |
hpnicfRateLimitRuntimeRuntime.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.22 |
hpnicfRateLimitRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.23 |
hpnicfRateLimitExceedCosExceeding COS of rate-limited port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.24 |
hpnicfRateLimitConformCosIf the user choose remark-cos value of the hpnicfRateLimitConformActionType, This object can be used to set the conform COS value. There are a few enumerations as follows: background Specify background priority(1) best-effort Specify best-effort priority(0) controlled-load Specify controlled-load priority(4) excellent-effort Specify excellent-effort priority(3) network-management Specify network-management priority(7) spare Specify spare priority(2) video Specify video priority(5) voice Specify voice priority(6)rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.25 |
hpnicfRateLimitConformDscpIf the user choose remark-dscp value of the hpnicfRateLimitConformActionType, This object can be used to set the conform dscp value. There are a few enumerations as follows: <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw INTEGER(0..63|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.26 |
hpnicfRateLimitMeterStatByteCountThe counter of conform byte.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.27 |
hpnicfRateLimitMeterStatByteXCountThe counter of exceed byte.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.28 |
hpnicfRateLimitMeterStatStateThe status of meter statistic.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.4.1.29 |
hpnicfPriorityTableThe priority table which contains priority entry. SEQUENCE OF HpnicfPriorityEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5 |
hpnicfPriorityEntryThe configuration information of priority. HpnicfPriorityEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1 |
hpnicfPriorityAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.1 |
hpnicfPriorityIfIndexifIndex of the port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.2 |
hpnicfPriorityVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.3 |
hpnicfPriorityDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.4 |
hpnicfPriorityUserAclNumThe number of user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.5 |
hpnicfPriorityUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.6 |
hpnicfPriorityIpAclNumThe number of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.7 |
hpnicfPriorityIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.8 |
hpnicfPriorityLinkAclNumThe number of Link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.9 |
hpnicfPriorityLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.10 |
hpnicfPriorityDscpSet DSCP Value. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 service(18) af22 Specify Assured Forwarding 22 service(20) af23 Specify Assured Forwarding 23 service(22) af31 Specify Assured Forwarding 31 service(26) af32 Specify Assured Forwarding 32 service(28) af33 Specify Assured Forwarding 33 service(30) af41 Specify Assured Forwarding 41 service(34) af42 Specify Assured Forwarding 42 service(36) af43 Specify Assured Forwarding 43 service(38) be Specify Best Effort service(0) cs1 Specify Class Selector 1 service(8) cs2 Specify Class Selector 2 service(16) cs3 Specify Class Selector 3 service(24) cs4 Specify Class Selector 4 service(32) cs5 Specify Class Selector 5 service(40) cs6 Specify Class Selector 6 service(48) cs7 Specify Class Selector 7 service(56) ef Specify Expedited Forwarding service(46)rw INTEGER(0..63|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.11 |
hpnicfPriorityIpPreSet Ip precedence.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.12 |
hpnicfPriorityIpPreFromCosSet Ip precedence according to vlan priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.13 |
hpnicfPriorityCosSet vlan priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.14 |
hpnicfPriorityCosFromIpPreSet vlan priority according to IP precedence.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.15 |
hpnicfPriorityLocalPreSet local precedence.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.16 |
hpnicfPriorityPolicedServiceTypeThe service type of proliced Priority.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.17 |
hpnicfPriorityPolicedServiceDscpThe service Dscp of proliced Priority.rw INTEGER(0..63|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.18 |
hpnicfPriorityPolicedServiceExpThe service Exp of proliced Priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.19 |
hpnicfPriorityPolicedServiceCosThe service COS of proliced Priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.20 |
hpnicfPriorityPolicedServiceLoaclPreThe service local pre of proliced Priority.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.21 |
hpnicfPriorityPolicedServiceDropPriorityThe service drop priority of proliced Priority.rw INTEGER(0..2|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.22 |
hpnicfPriorityRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.23 |
hpnicfPriorityRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.5.1.24 |
hpnicfRedirectTableRedirect table which contains rediect entry. SEQUENCE OF HpnicfRedirectEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6 |
hpnicfRedirectEntryConfiguration information of redirection. HpnicfRedirectEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1 |
hpnicfRedirectAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.1 |
hpnicfRedirectIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.2 |
hpnicfRedirectVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.3 |
hpnicfRedirectDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.4 |
hpnicfRedirectUserAclNumThe number of the user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.5 |
hpnicfRedirectUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.6 |
hpnicfRedirectIpAclNumThe num of the IP acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.7 |
hpnicfRedirectIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.8 |
hpnicfRedirectLinkAclNumThe num of the link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.9 |
hpnicfRedirectLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.10 |
hpnicfRedirectToCpuRedirect to cpu.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.11 |
hpnicfRedirectToIfIndexThe ifIndex of port to be redirect to.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.12 |
hpnicfRedirectToNextHop1rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.13 |
hpnicfRedirectToNextHop2rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.14 |
hpnicfRedirectRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.15 |
hpnicfRedirectRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.16 |
hpnicfRedirectToSlotNoThe slot number to process redirection. Default value is 15. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.17 |
hpnicfRedirectRemarkedDSCPDSCP of Policy-Based Routing. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.rw INTEGER(0..63|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.18 |
hpnicfRedirectRemarkedPriThe priority of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.19 |
hpnicfRedirectRemarkedTosThe TOS of the redirect packet. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is optional.rw INTEGER(0..15|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.20 |
hpnicfRedirectToNextHop3The third IP address for PBR. Default value is 0xffffffff. When L3plus function is not supported, the default value would be set. The data stream can be redirected to three nexthops at most or one VLAN interface, one nexthop should be set at least if data packets are not redirected to VLAN interface for L3plus redirection function.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.21 |
hpnicfRedirectTargetVlanIDThe destination vlan ID for PBR. Default value is 0. When L3plus function is not supported, the default value would be set. For L3plus redirection function, it is necessary when no nexthop is set.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.22 |
hpnicfRedirectModeThe node denotes the strategy adopted by the PBR. If strict-priority is configured, the most preferential IP address is use as redirected nexthop. If the mode is load-balance, any of the three IP addresses will be the nexthop and the traffic distributes in the three direction. Default value is strict-priority. When L3plus function is not supported, the default value would be set. It is optional.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.23 |
hpnicfRedirectToNestedVlanIDThe nested vlan ID inserted before the original vlan tag. Default value is 0. When the function is not supported, the default value would be set. It is optional.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.24 |
hpnicfRedirectToModifiedVlanIDThe new vlan ID replaced the old one. Default value is 0. When the function is not supported, the default value would be set. It is optional.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.6.1.25 |
hpnicfStatisticTableStatistic table which contains statistic entry. SEQUENCE OF HpnicfStatisticEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7 |
hpnicfStatisticEntryConfiguration about statistic information. HpnicfStatisticEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1 |
hpnicfStatisticAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.1 |
hpnicfStatisticIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.2 |
hpnicfStatisticVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.3 |
hpnicfStatisticDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.4 |
hpnicfStatisticUserAclNumThe number of the user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.5 |
hpnicfStatisticUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.6 |
hpnicfStatisticIpAclNumThe number of the IP acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.7 |
hpnicfStatisticIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.8 |
hpnicfStatisticLinkAclNumThe number of the link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.9 |
hpnicfStatisticLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.10 |
hpnicfStatisticRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.11 |
hpnicfStatisticPacketCountThe counter of the packets which is matched.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.12 |
hpnicfStatisticByteCountThe counter of the byte which is matched.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.13 |
hpnicfStatisticCountClearClear the counter of the packets.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.14 |
hpnicfStatisticRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.15 |
hpnicfStatisticPacketXCountThe counter of the outprofile packets.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.16 |
hpnicfStatisticByteXCountThe counter of the outprofile bytes.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.7.1.17 |
hpnicfMirrorTableMirror table which contains mirror entry. SEQUENCE OF HpnicfMirrorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8 |
hpnicfMirrorEntryConfiguration information to be mirrored. HpnicfMirrorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1 |
hpnicfMirrorAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.1 |
hpnicfMirrorIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.2 |
hpnicfMirrorVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.3 |
hpnicfMirrorDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.4 |
hpnicfMirrorUserAclNumThe number of the user acl.rw INTEGER(0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.5 |
hpnicfMirrorUserAclRuleThe subitem of the user acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.6 |
hpnicfMirrorIpAclNumThe subitem of the user acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.7 |
hpnicfMirrorIpAclRuleThe subitem of the IP acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.8 |
hpnicfMirrorLinkAclNumThe number of the link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.9 |
hpnicfMirrorLinkAclRuleThe subitem of the link acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.10 |
hpnicfMirrorToIfIndexThe ifIndex of port that to be mirrored to.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.11 |
hpnicfMirrorToCpuMirror to cpu.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.12 |
hpnicfMirrorRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.13 |
hpnicfMirrorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.14 |
hpnicfMirrorToGroupThe destination of stream-based mirroring is the mirroring group.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.8.1.15 |
hpnicfPortMirrorTablePort Mirror. SEQUENCE OF HpnicfPortMirrorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9 |
hpnicfPortMirrorEntryConfiguration information of port mirroring. HpnicfPortMirrorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1 |
hpnicfPortMirrorIfIndexThe ifIndex of mirror port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.1 |
hpnicfPortMirrorDirectionThe direction of mirror port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.2 |
hpnicfPortMirrorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.9.1.3 |
hpnicfLineRateTableLine Rate. SEQUENCE OF HpnicfLineRateEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10 |
hpnicfLineRateEntryConfiguration information of line-rate port. HpnicfLineRateEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1 |
hpnicfLineRateIfIndexThe ifIndex of port of line rate.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.1 |
hpnicfLineRateDirectionThe direction of line rate.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.2 |
hpnicfLineRateValueThe value of the line-rate.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.3 |
hpnicfLineRateRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.10.1.4 |
hpnicfBandwidthTableBandwidth. SEQUENCE OF HpnicfBandwidthEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11 |
hpnicfBandwidthEntryConfiguration information of bandwidth of port. HpnicfBandwidthEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1 |
hpnicfBandwidthAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.1 |
hpnicfBandwidthIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.2 |
hpnicfBandwidthVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.3 |
hpnicfBandwidthDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.4 |
hpnicfBandwidthIpAclNumThe number of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.5 |
hpnicfBandwidthIpAclRuleThe subitem of ip acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.6 |
hpnicfBandwidthLinkAclNumThe number of link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.7 |
hpnicfBandwidthLinkAclRuleThe subitem of link acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.8 |
hpnicfBandwidthMinGuaranteedWidthThe min width which is guaranteed.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.9 |
hpnicfBandwidthMaxGuaranteedWidthThe max width which is guaranteed.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.10 |
hpnicfBandwidthWeightWeight of bandwidth.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.11 |
hpnicfBandwidthRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.12 |
hpnicfBandwidthRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.11.1.13 |
hpnicfRedTableRed table which contains RED entry. SEQUENCE OF HpnicfRedEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12 |
hpnicfRedEntryConfiguration information of RED. HpnicfRedEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1 |
hpnicfRedAclIndexIndex of acl rule.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.1 |
hpnicfRedIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.2 |
hpnicfRedVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.3 |
hpnicfRedDirectionDirection of data stream.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.4 |
hpnicfRedIpAclNumThe num of Ip acl.rw INTEGER(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.5 |
hpnicfRedIpAclRuleThe subitem of Ip acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.6 |
hpnicfRedLinkAclNumThe number of link acl.rw INTEGER(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.7 |
hpnicfRedLinkAclRuleThe subitem of link acl.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.8 |
hpnicfRedStartQueueLenThe length of Starting queue.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.9 |
hpnicfRedStopQueueLenThe length of stopping queue.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.10 |
hpnicfRedProbabilityProbability.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.11 |
hpnicfRedRuntimeIs run or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.12 |
hpnicfRedRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.12.1.13 |
hpnicfMirrorGroupTableMirror Group. SEQUENCE OF HpnicfMirrorGroupEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13 |
hpnicfMirrorGroupEntryConfiguration information of mirroring group. HpnicfMirrorGroupEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1 |
hpnicfMirrorGroupIDGroup ID of mirroring group.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.1 |
hpnicfMirrorGroupDirectionDirection of data stream which would be mirrored.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.2 |
hpnicfMirrorGroupMirrorIfIndexListifIndex list of source port.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.3 |
hpnicfMirrorGroupMonitorIfIndexifIndex of destination port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.4 |
hpnicfMirrorGroupRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.13.1.5 |
hpnicfFlowtempTableFlow-template table which contains flow-template entry. SEQUENCE OF HpnicfFlowtempEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14 |
hpnicfFlowtempEntryConfiguration information of flow-template. HpnicfFlowtempEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1 |
hpnicfFlowtempIndexIndex of flow template.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.1 |
hpnicfFlowtempIpProtocolprotocol-type of IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.2 |
hpnicfFlowtempTcpFlagThe flag of Tcp paceket.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.3 |
hpnicfFlowtempSPortThe port of source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.4 |
hpnicfFlowtempDPortThe port of destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.5 |
hpnicfFlowtempIcmpTypeThe type of Icmp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.6 |
hpnicfFlowtempIcmpCodeThe code of Icmp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.7 |
hpnicfFlowtempFragmentThe flag of Fragment.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.8 |
hpnicfFlowtempDscpDscp of IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.9 |
hpnicfFlowtempIpPreThe Precedence of Ip packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.10 |
hpnicfFlowtempTosTos of IP packet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.11 |
hpnicfFlowtempSIpThe Ip of source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.12 |
hpnicfFlowtempSIpMaskThe mask of source-Ip.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.13 |
hpnicfFlowtempDIpThe Ip of destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.14 |
hpnicfFlowtempDIpMaskThe mask of destination-Ip.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.15 |
hpnicfFlowtempEthProtocolProtocol type of Ethernet.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.16 |
hpnicfFlowtempSMacThe Mac of source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.17 |
hpnicfFlowtempSMacMaskThe mask of source-Mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.18 |
hpnicfFlowtempDMacThe mac of destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.19 |
hpnicfFlowtempDMacMaskThe mask of destination-Mac.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.20 |
hpnicfFlowtempVpnVpnrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.21 |
hpnicfFlowtempRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.22 |
hpnicfFlowtempVlanIdSource VLAN ID.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.23 |
hpnicfFlowtempCos802.1P priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.14.1.24 |
hpnicfFlowtempEnableTableThe table of flow-template. SEQUENCE OF HpnicfFlowtempEnableEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15 |
hpnicfFlowtempEnableEntryEnable entry of flow-template. HpnicfFlowtempEnableEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1 |
hpnicfFlowtempEnableIfIndexifIndex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.1 |
hpnicfFlowtempEnableVlanIDVlan ID.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.2 |
hpnicfFlowtempEnableFlowtempIndexThe index of Flowtemp table.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.15.1.3 |
hpnicfTrafficShapeTableThe traffic-shape table which contains traffic-shape entry. SEQUENCE OF HpnicfTrafficShapeEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16 |
hpnicfTrafficShapeEntryConfiguration information of traffic-shape. HpnicfTrafficShapeEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1 |
hpnicfTrafficShapeIfIndexIfIdex of port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.1 |
hpnicfTrafficShapeQueueIdID of queue which would be shaped.rw INTEGER(0..7|255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.2 |
hpnicfTrafficShapeMaxRateThe max rate.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.3 |
hpnicfTrafficShapeBurstSizeThe size of burst.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.4 |
hpnicfTrafficShapeBufferLimitThe limit of buffer.rw INTEGER(0|16..8000) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.5 |
hpnicfTrafficShapeRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.16.1.6 |
hpnicfPortQueueTableThe port-queue table which contains port-queue entry. SEQUENCE OF HpnicfPortQueueEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17 |
hpnicfPortQueueEntryConfiguration information of port-queue. HpnicfPortQueueEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1 |
hpnicfPortQueueIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.1 |
hpnicfPortQueueQueueIDID of port-queue.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.2 |
hpnicfPortQueueWrrPriorityThe priority of Wrr.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.3 |
hpnicfPortQueueWeightThe weight of this queue.rw INTEGER(0|1..255) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.17.1.4 |
hpnicfDropModeTableThe drop-mode table which contains drop-mode entry. SEQUENCE OF HpnicfDropModeEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18 |
hpnicfDropModeEntryConfiguration information of the drop-mode. HpnicfDropModeEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1 |
hpnicfDropModeIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.1 |
hpnicfDropModeModeMode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.2 |
hpnicfDropModeWredIndexThe index of Wred table.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.18.1.3 |
hpnicfWredTableThe Wred table which contains wred Entry. SEQUENCE OF HpnicfWredEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19 |
hpnicfWredEntryConfiguration information of Wred. HpnicfWredEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1 |
hpnicfWredIndexIndex of wred.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.1 |
hpnicfWredQueueIdQueue ID.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.2 |
hpnicfWredGreenMinThresholdThe min threshold of Green.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.3 |
hpnicfWredGreenMaxThresholdThe max threshold of Greem.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.4 |
hpnicfWredGreenMaxProbThe max prob of Green.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.5 |
hpnicfWredYellowMinThresholdThe min threshold of Yellow.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.6 |
hpnicfWredYellowMaxThresholdThe max threshold of Yellow.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.7 |
hpnicfWredYellowMaxProbThe Prob threshold of Yellow.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.8 |
hpnicfWredRedMinThresholdThe min threshold of Red.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.9 |
hpnicfWredRedMaxThresholdThe max threshold of Red.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.10 |
hpnicfWredRedMaxProbThe max prob of Red.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.11 |
hpnicfWredExponentExponent.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.19.1.12 |
hpnicfCosToLocalPrecedenceMapTableTable of map of the COS to local-precedence. SEQUENCE OF HpnicfCosToLocalPrecedenceMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20 |
hpnicfCosToLocalPrecedenceMapEntryConfiguration information of map of the COS to local precedence. HpnicfCosToLocalPrecedenceMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1 |
hpnicfCosToLocalPrecedenceMapCosIndexIndex of the map.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.1 |
hpnicfCosToLocalPrecedenceMapLocalPrecedenceValueValue of local precedence.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.20.1.2 |
hpnicfCosToDropPrecedenceMapTableThe table of map of COS to drop-precedence. SEQUENCE OF HpnicfCosToDropPrecedenceMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21 |
hpnicfCosToDropPrecedenceMapEntryConfiguration information of the map of the COS to drop-precedence. HpnicfCosToDropPrecedenceMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1 |
hpnicfCosToDropPrecedenceMapCosIndexIndex of the map.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.1 |
hpnicfCosToDropPrecedenceMapDropPrecedenceValueValue of drop-precedence.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.21.1.2 |
hpnicfDscpMapTableTable of dscp map. SEQUENCE OF HpnicfDscpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22 |
hpnicfDscpMapEntryConfiguration information of Dscp map. HpnicfDscpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1 |
hpnicfDscpMapConformLevelConformable level of Dscp-map.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.1 |
hpnicfDscpMapDscpIndexIndex of dscp.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.2 |
hpnicfDscpMapDscpValueValue of Dscp.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.3 |
hpnicfDscpMapExpValueExp value.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.4 |
hpnicfDscpMapCosValueCOS value.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.5 |
hpnicfDscpMapLocalPrecedenceThe precedence of local.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.6 |
hpnicfDscpMapDropPrecedenceThe precedence of Drop.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.22.1.7 |
hpnicfExpMapTableThe table of Exp-map SEQUENCE OF HpnicfExpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23 |
hpnicfExpMapEntryConfiguration information of Exp-map. HpnicfExpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1 |
hpnicfExpMapConformLevelConformable level of Exp-map.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.1 |
hpnicfExpMapExpIndexIndex of Exp.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.2 |
hpnicfExpMapDscpValueDscp value.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.3 |
hpnicfExpMapExpValueExp value.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.4 |
hpnicfExpMapCosValueCOS Value.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.5 |
hpnicfExpMapLocalPrecedenceThe precedence of local.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.6 |
hpnicfExpMapDropPrecedenceThe precedence of Drop.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.23.1.7 |
hpnicfLocalPrecedenceMapTableThe table of local-precedence map. SEQUENCE OF HpnicfLocalPrecedenceMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24 |
hpnicfLocalPrecedenceMapEntryConfiguraion information of local-precedence map. HpnicfLocalPrecedenceMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1 |
hpnicfLocalPrecedenceMapConformLevelConformable level of local-precedence map.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.1 |
hpnicfLocalPrecedenceMapLocalPrecedenceIndexIndex of local-precedence.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.2 |
hpnicfLocalPrecedenceMapCosValueCOS value.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.24.1.3 |
hpnicfPortWredTableThe table of PortWred. SEQUENCE OF HpnicfPortWredEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25 |
hpnicfPortWredEntryConfiguration information of port Wred. HpnicfPortWredEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1 |
hpnicfPortWredIfIndexifIndex of port.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.1 |
hpnicfPortWredQueueIDID of port-Wred queue.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.2 |
hpnicfPortWredQueueStartLengthQueue length.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.3 |
hpnicfPortWredQueueProbabilityProbability.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.25.1.4 |
hpnicfMirroringGroupTableThe table of MirrorGroup. SEQUENCE OF HpnicfMirroringGroupEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26 |
hpnicfMirroringGroupEntryConfiguration information of MirrorGroup. HpnicfMirroringGroupEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1 |
hpnicfMirroringGroupIDGroupID. INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.1 |
hpnicfMirroringGroupTypeGroupType.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.2 |
hpnicfMirroringGroupStatusMirroringGroup status.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.3 |
hpnicfMirroringGroupRowStatusRowStatus, Now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.26.1.4 |
hpnicfMirroringGroupMirrorTableMirroringGroup mirroring-port information. SEQUENCE OF HpnicfMirroringGroupMirrorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27 |
hpnicfMirroringGroupMirrorEntryMirroringGroup mirroring-port information. HpnicfMirroringGroupMirrorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1 |
hpnicfMirroringGroupMirrorInboundIfIndexListInbound-Mirror ifIndex(for port) and slot number(for board) list. Example A describes the relation between values of hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList. Example A: hpnicfMirroringGroupMirrorInboundIfIndexList: '00000002 0C000022 00000007' hpnicfMirroringGroupMirrorInTypeList: '00000002 00000001 00000002' Every four octets represent an integer value. The first four octets of them should be same. Here the value '00000002' indicates there are two inbound mirror sources. The following every four octets of hpnicfMirroringGroupMirrorInboundIfIndexList indicate an ifIndex or a slot number of mirror source. For '0C000022' and '00000007' in the value of hpnicfMirroringGroupMirrorInboundIfIndexList above, the corresponding value of hpnicfMirroringGroupMirrorInTypeList is '00000001' and '00000002'(00000001 means the mirror source is port, 00000002 means the mirror source is board, the meaning reference the object HpnicfMirrorOrMonitorType), then '0C000022' indicates an ifIndex value 201326626(decimal), and '00000007' indicates a slot with number 7(decimal). Values with different types(port/board) should be set in separate set operations. If one value with port type and one value with board type are set with same hpnicfMirroringGroupID separately, the result of get operation for that entry will be like the example A above. If hpnicfMirroringGroupMirrorInTypeList is not supported, the first four octets of hpnicfMirroringGroupMirrorInboundIfIndexList also indicates the number of mirror source, but the following octets are values for ifIndex(port type). hpnicfMirroringGroupMirrorOutboundIfIndexList and hpnicfMirroringGroupMirrorOutTypeList are a pair and have the same relations like hpnicfMirroringGroupMirrorInboundIfIndexList and hpnicfMirroringGroupMirrorInTypeList pair.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.1 |
hpnicfMirroringGroupMirrorOutboundIfIndexListOutbound-Mirror ifIndex and slot number list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.2 |
hpnicfMirroringGroupMirrorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.3 |
hpnicfMirroringGroupMirrorInTypeListInbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.4 |
hpnicfMirroringGroupMirrorOutTypeListOutbound-Mirror type list. Please refer to the description of hpnicfMirroringGroupMirrorInboundIfIndexList.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.27.1.5 |
hpnicfMirroringGroupMonitorTableMirroringGroup monitor-port information. SEQUENCE OF HpnicfMirroringGroupMonitorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28 |
hpnicfMirroringGroupMonitorEntryMirroringGroup monitor-port information. HpnicfMirroringGroupMonitorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1 |
hpnicfMirroringGroupMonitorIfIndexIf the monitor destination is port, the value means the ifIndex of this port. If the monitor destination is board, the value means the slot number of the board. Whether the value means ifIndex or slot number references the object hpnicfMirroringGroupMonitorType.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.1 |
hpnicfMirroringGroupMonitorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.2 |
hpnicfMirroringGroupMonitorTypeSpecify whether the monitor destination is port or board. If this object is not supported, then the value of hpnicfMirroringGroupMonitorIfIndex means ifIndex.rw HpnicfMirrorOrMonitorType .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.28.1.3 |
hpnicfMirroringGroupReflectorTableMirroringGroup reflector-port information. SEQUENCE OF HpnicfMirroringGroupReflectorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29 |
hpnicfMirroringGroupReflectorEntryMirroringGroup reflector-port information. HpnicfMirroringGroupReflectorEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1 |
hpnicfMirroringGroupReflectorIfIndexOnly valid for remote-source MirroringGroup.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.1 |
hpnicfMirroringGroupReflectorRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.29.1.2 |
hpnicfMirroringGroupRprobeVlanTableMirroringGroup rprobe-vlan information. SEQUENCE OF HpnicfMirroringGroupRprobeVlanEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30 |
hpnicfMirroringGroupRprobeVlanEntryMirroringGroup rprobe-vlan information. HpnicfMirroringGroupRprobeVlanEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1 |
hpnicfMirroringGroupRprobeVlanIDRemote-Probe vlanID. 0 is invalid value. Only valid for remote-source and remote-destination MirroringGroup.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.1 |
hpnicfMirroringGroupRprobeVlanRowStatusRowStatus, now support three status: createAndGo, active, destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.30.1.2 |
hpnicfMirroringGroupMirrorMacTableMirroringGroup MAC information. SEQUENCE OF HpnicfMirroringGroupMirrorMacEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31 |
hpnicfMirroringGroupMirrorMacEntryMirroringGroup MAC information. HpnicfMirroringGroupMirrorMacEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1 |
hpnicfMirroringGroupMirrorMacSeqThe sequence MAC number of the same group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.1 |
hpnicfMirroringGroupMirrorMacThe MAC address of the MirroringGroup.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.2 |
hpnicfMirrorMacVlanIDThe vlan ID of MAC address .rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.3 |
hpnicfMirroringGroupMirroMacStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.31.1.4 |
hpnicfMirroringGroupMirrorVlanTableMirroringGroup Vlan Information. SEQUENCE OF HpnicfMirroringGroupMirrorVlanEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32 |
hpnicfMirroringGroupMirrorVlanEntryMirroringGroup Vlan Information. HpnicfMirroringGroupMirrorVlanEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1 |
hpnicfMirroringGroupMirrorVlanSeqThe sequence vlan number of the same group. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.1 |
hpnicfMirroringGroupMirrorVlanIDThe vlan ID of MirroringGroup.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.2 |
hpnicfMirroringGroupMirrorVlanDirectionThe vlan direction of MirroringGroup.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.3 |
hpnicfMirroringGroupMirroVlanStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.32.1.4 |
hpnicfPortTrustTablePort trust information. SEQUENCE OF HpnicfPortTrustEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33 |
hpnicfPortTrustEntryPort trust information. HpnicfPortTrustEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1 |
hpnicfPortTrustIfIndexifIndex of the port which port trust is configured. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.1 |
hpnicfPortTrustTrustTypeTrust type of port trust.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.2 |
hpnicfPortTrustOvercastTypeOvercast type of port trust.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.3 |
hpnicfPortTrustResetThis object is used to reset port trust to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.33.1.4 |
hpnicfRemarkVlanIDTableRemark vlan ID information. SEQUENCE OF HpnicfRemarkVlanIDEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34 |
hpnicfRemarkVlanIDEntryRemark vlan ID information. HpnicfRemarkVlanIDEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1 |
hpnicfRemarkVlanIDAclIndexAction identifier, acl index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.1 |
hpnicfRemarkVlanIDIfIndexAction identifier, ifIndex. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.2 |
hpnicfRemarkVlanIDVlanIDAction identifier, vlan ID. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.3 |
hpnicfRemarkVlanIDDirectionAction identifier, direction of data stream. Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.4 |
hpnicfRemarkVlanIDUserAclNumThe number of the user acl.rw Integer32(0|5000..5999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.5 |
hpnicfRemarkVlanIDUserAclRuleThe subitem of the user acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.6 |
hpnicfRemarkVlanIDIpAclNumThe num of the IP acl.rw Integer32(0|2000..3999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.7 |
hpnicfRemarkVlanIDIpAclRuleThe subitem of the IP acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.8 |
hpnicfRemarkVlanIDLinkAclNumThe num of the link acl.rw Integer32(0|4000..4999|10000..12999) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.9 |
hpnicfRemarkVlanIDLinkAclRuleThe subitem of the link acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.10 |
hpnicfRemarkVlanIDRemarkVlanIDRemark vlan ID.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.11 |
hpnicfRemarkVlanIDPacketTypePacket type of the remarked vlan ID.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.12 |
hpnicfRemarkVlanIDRowStatusThe status of this conceptual row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.34.1.13 |
hpnicfCosToDscpMapTableCOS to DSCP map information. SEQUENCE OF HpnicfCosToDscpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35 |
hpnicfCosToDscpMapEntryCOS to DSCP map information. HpnicfCosToDscpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1 |
hpnicfCosToDscpMapCosIndexCOS index of COS to DSCP map. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.1 |
hpnicfCosToDscpMapDscpValueDSCP value of COS to DSCP map.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.2 |
hpnicfCosToDscpMapReSetThis object is used to reset COS to DSCP map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.35.1.3 |
hpnicfDscpToLocalPreMapTableDSCP to Local-precedence map information. SEQUENCE OF HpnicfDscpToLocalPreMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36 |
hpnicfDscpToLocalPreMapEntryDSCP to Local-precedence map information. HpnicfDscpToLocalPreMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1 |
hpnicfDscpToLocalPreMapDscpIndexDSCP Index of DSCP to Local-precedence map. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.1 |
hpnicfDscpToLocalPreMapLocalPreValLocal-precedence value of DSCP to Local-precedence map.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.2 |
hpnicfDscpToLocalPreMapResetThis object is used to reset DSCP to Local-precedence map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.36.1.3 |
hpnicfDscpToDropPreMapTableDSCP to Drop-precedence map information. SEQUENCE OF HpnicfDscpToDropPreMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37 |
hpnicfDscpToDropPreMapEntryDSCP to Drop-precedence map information. HpnicfDscpToDropPreMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1 |
hpnicfDscpToDropPreMapDscpIndexDSCP Index of DSCP to Drop-precedence map. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.1 |
hpnicfDscpToDropPreMapDropPreValDrop-precedence value of DSCP to Drop-precedence map.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.2 |
hpnicfDscpToDropPreMapResetThis object is used to reset DSCP to Drop-precedence map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.37.1.3 |
hpnicfDscpToCosMapTableDSCP to COS map information. SEQUENCE OF HpnicfDscpToCosMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38 |
hpnicfDscpToCosMapEntryDSCP to COS map information. HpnicfDscpToCosMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1 |
hpnicfDscpToCosMapDscpIndexDSCP index of DSCP to COS map. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.1 |
hpnicfDscpToCosMapCosValueCOS value of DSCP to COS map.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.2 |
hpnicfDscpToCosMapResetThis object is used to reset DSCP to COS map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.38.1.3 |
hpnicfDscpToDscpMapTableDSCP to DSCP map information. SEQUENCE OF HpnicfDscpToDscpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39 |
hpnicfDscpToDscpMapEntryDSCP to DSCP map information. HpnicfDscpToDscpMapEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1 |
hpnicfDscpToDscpMapDscpIndexDSCP index of DSCP to DSCP map. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.1 |
hpnicfDscpToDscpMapDscpValueDSCP value of DSCP to DSCP map.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.2 |
hpnicfDscpToDscpMapResetThis object is used to reset DSCP to DSCP map to default value. Read operation is meaningless.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.16.2.39.1.3 |