HPN-ICF-PPP-OVER-SONET-MIB
This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.
Main OID:
hpnicfPos.1.3.6.1.4.1.11.2.14.11.15.2.19
51
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
hpnicfPosThis MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.19 |
hpnicfPosMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.19.1 |
hpnicfPosParamTableThe pos parameter table. SEQUENCE OF HpnicfPosParamTableEntry .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1 |
hpnicfPosParamTableEntryThe entry of pos table. HpnicfPosParamTableEntry .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1 |
hpnicfPosCRCThe length of CRCrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.1 |
hpnicfPosMTUMaximum Transfer Unit (MTU) of POS interfacerw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.2 |
hpnicfPosScrambleScrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.3 |
hpnicfPosClockSourceThe value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remoterw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.4 |
hpnicfPosSdhFlagJ0The section trace byte. This node is used when the frame type is sdh.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.5 |
hpnicfPosSdhFlagJ1The path trace byte. This node is used when the frame type is sdh.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.6 |
hpnicfPosSonetFlagJ0The section trace byte. This node is used when the frame type is sonet.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.7 |
hpnicfPosSonetFlagJ1The path trace byte. This node is used when the frame type is sonet.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.8 |
hpnicfPosFlagC2The parameter for the channel signal value of C2 byterw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.9 |
hpnicfPosFrameTypeThe frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.10 |
hpnicfPosBindVlanIdThe vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.11 |
hpnicfPosEncapsulationThe type of encapsulationrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.12 |
hpnicfPoskeepaliveTimeoutThe keeplive of ppp, hdlc or fr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.13 |
hpnicfPosBERthresholdSFThe bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.14 |
hpnicfPosBERthresholdSDThe bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.15 |
hpnicfPosB1ErrorCounter for SBIPE(Section Bit Interleave Parity Error)ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.16 |
hpnicfPosB2ErrorCounter for LBIPE(Line Bit Interleave Parity Error)ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.17 |
hpnicfPosB3ErrorCounter for PBIPE(Path Bit Interleave Parity Error)ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.18 |
hpnicfPosM1ErrorHow many times does LREI(Line Remote Error Indication) occurro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.19 |
hpnicfPosG1ErrorHow many times does PREI(Path Remote Error Indication) occurro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.20 |
hpnicfPosFlagJ0TypeThe frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.21 |
hpnicfPosFlagJ1TypeThe frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.22 |
hpnicfPosB1TCAThresholdThreshold for B1 TCA.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.23 |
hpnicfPosB2TCAThresholdThreshold for B2 TCA.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.24 |
hpnicfPosB3TCAThresholdThreshold for B3 TCA.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.25 |
hpnicfPosB1TCAEnableEnable traps of B1 TCA.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.26 |
hpnicfPosB2TCAEnableEnable traps of B2 TCA.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.27 |
hpnicfPosB3TCAEnableEnable traps of B3 TCA.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.19.1.1.1.28 |
hpnicfPosMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.19.2 |
hpnicfPosMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0 |
hpnicfPosLOSAlarmAlarm indicates loss of signal NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.1 |
hpnicfPosLOFAlarmAlarm indicates loss of frame NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.2 |
hpnicfPosOOFAlarmAlarm indicates out of frame NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.3 |
hpnicfPosLAISAlarmAlarm when LAIS(Line Alarm Indication Signal) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.4 |
hpnicfPosLRDIAlarmAlarm when LRDI(Line Remote Defect Indication) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.5 |
hpnicfPosPRDIAlarmAlarm when PRDI(Path Remote Defect Indication) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.6 |
hpnicfPosPAISAlarmAlarm when PAIS(Path Alarm Indication Signal) arrives NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.7 |
hpnicfPosLOPAlarmAlarm indicates loss of pointer NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.8 |
hpnicfPosSTIMAlarmAlarm indicates inconsistency between sent and received J0 bytes. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.9 |
hpnicfPosPTIMAlarmAlarm indicates inconsistency between sent and received J1 bytes. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.10 |
hpnicfPosPSLMAlarmAlarm indicates a mismatched C2 byte. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.11 |
hpnicfPosLSDAlarmAlarm indicates that the B2 bit-error rate exceeds SD threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.12 |
hpnicfPosLSFAlarmAlarm indicates that the B2 bit-error rate exceeds SF threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.13 |
hpnicfPosNormalAlarmAlarm indicates that the Pos interface state returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.14 |
hpnicfPosB1TCAlarmThreshold crossing alarms for B1. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.15 |
hpnicfPosB2TCAlarmThreshold crossing alarms for B2. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.16 |
hpnicfPosB3TCAlarmThreshold crossing alarms for B3. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.19.2.0.17 |
More MIBs from HP
Browse all HPMIBs →BLADETYPE6-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE6-NETWORK-MIB.
2263 objects→
BLADETYPE5-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240 objects→
BLADETYPE4-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE4-NETWORK-MIB.
2226 objects→
HPN-ICF-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HPIPFTRAP-MIB
Standard SNMP MIB module defining data structures for HPIPFTRAP-MIB.
1186 objects→
BLADETYPE2-NETWORK-MIB
The BLADETYPE2-NETWORK-MIB module provides SNMP access to Layer 3 configuration parameters, interface statistics, and routing information for blade server network interfaces. It enables monitoring of IP address assignments, interface operational states, and packet counters specific to the blade chassis network subsystem.
1056 objects→