HPN-ICF-DOT11-STATION-MIB
AI MIB Summary
The HPN-ICF-DOT11-STATION-MIB enables monitoring and configuration of IEEE 802.11 client stations associated with HP ProCurve wireless access points, exposing critical metrics such as RSSI signal strength, MIC integrity errors, and AKM authentication states. This module facilitates granular visibility into station-level performance, association parameters, and security attributes within the BSS environment.
This MIB defines the configuration and statistic information of stations. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associated with the AP. station (Client Station) A wireless device in a wireless network associated with an access point. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. SSID Radio Service Set ID. It is used for identification during association. STA (WSTA) A non-AP 802.11 wireless station. WEP Wired Equivalent Privacy. 'WEP' is generally used to refer to 802.11 encryption. RSSI It is the received signal strength indication. It suggests the quality of received signal. RTS Request to Send, it is used to gain control of the medium for the transmission of 'large' frames, in which 'large' is defined by the RTS threshold in the network card driver. CTS Clear to Send, it is used to answer RTS frames. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key.
Main OID:
hpnicfDot11STATION.1.3.6.1.4.1.11.2.14.11.15.2.75.3
114
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
114 total| Object Name |
|---|
hpnicfDot11STATIONThis MIB defines the configuration and statistic information of stations. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associated with the AP. station (Client Station) A wireless device in a wireless network associated with an access point. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. SSID Radio Service Set ID. It is used for identification during association. STA (WSTA) A non-AP 802.11 wireless station. WEP Wired Equivalent Privacy. 'WEP' is generally used to refer to 802.11 encryption. RSSI It is the received signal strength indication. It suggests the quality of received signal. RTS Request to Send, it is used to gain control of the medium for the transmission of 'large' frames, in which 'large' is defined by the RTS threshold in the network card driver. CTS Clear to Send, it is used to answer RTS frames. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.75.3 |
hpnicfDot11StationMtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1 |
hpnicfDot11StationAssociateTableThis table contains the information of stations which are associating with the wireless network (current AC). SEQUENCE OF HpnicfDot11StationAssociateEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1 |
hpnicfDot11StationAssociateEntryEach entry contains association information of each station. HpnicfDot11StationAssociateEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1 |
hpnicfDot11StationMACRepresents the unique MAC Address of station. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.1 |
hpnicfDot11StationIPAddressRepresents the IP address of the station.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.2 |
hpnicfDot11StationUserNameRepresents the user name of the station.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.3 |
hpnicfDot11StationTxRateSetRepresents the current transmit data rates for this station. Each byte will represent one rate. If the MSB(Most significant bit) is set, then this rate is a mandantory rate. Otherwise, it is optional.ro OCTET STRING UNITS "Mbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.4 |
hpnicfDot11StationUpTimeThe time in seconds, how long this station has been associated with this device.ro Unsigned32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.5 |
hpnicfDot11StationSignalStrengthRepresents a device-dependent measure of the signal strength of latest packet received from this station.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.6 |
hpnicfDot11StationRSSIRepresents a device-dependent measure of the RSSI. It is the received signal strength indication. The maximum value is defined by chip set vendorsro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.7 |
hpnicfDot11StationChannelRepresents current radio channel used by station.ro HpnicfDot11ChannelScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.8 |
hpnicfDot11StationPowerSaveModeRepresents the power management mode of this station. The following values are supported: active - This station is not in power-save mode and it is actively sending or receiving data. powersave - This station is in power-save mode and it wakes up after sometime to check for buffer data.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.9 |
hpnicfDot11StationAidRepresents the association identification number of station.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.10 |
hpnicfDot11StationVlanIdRepresents Vlan ID to which the station is associated.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.11 |
hpnicfDot11StationSSIDNameRepresents the ESS name.ro HpnicfDot11SSIDStringType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.12 |
hpnicfDot11StationAuthenModeRepresents the Authentication mode defined by 802.11.ro HpnicfDot11AuthenType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.13 |
hpnicfDot11StationAKMModeRepresents the key management mode defined by 802.11i.ro HpnicfDot11AKMType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.14 |
hpnicfDot11StationSecurityCiphersRepresents the frame encryption cipher type used by station.ro HpnicfDot11CipherType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.15 |
hpnicfDot11StationSSIDEncryptModeRepresents the encryption mode for this ESS.ro HpnicfDot11SSIDEncryptModeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.16 |
hpnicfDot11StationRxSNRRepresents the signal and noise strength ratio of frame reception.ro Integer32 UNITS "One Percent" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.17 |
hpnicfDot11StationTxRateRepresents the transmission rate of frame.ro Integer32 UNITS "Mbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.18 |
hpnicfDot11StationRxRateRepresents the reception rate of frame.ro Integer32 UNITS "Mbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.19 |
hpnicfDot11StationVendorNameRepresents the vendor name of the station.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.20 |
hpnicfDot11StationRadioModeRepresents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a station,it could support only one radio type at the same time.ro HpnicfDot11RadioType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.21 |
hpnicfDot11StationRxNoiseRepresents the received noise of the station.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.22 |
hpnicfDot11StationMACAddressRepresents MAC Address of station.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.23 |
hpnicfDot11StationTxSpeedRepresents the bytes of transmitted data frames to the station per second in sample interval.ro Integer32 UNITS "byte/s" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.24 |
hpnicfDot11StationRxSpeedRepresents the bytes of received data frames from the station per second in sample interval.ro Integer32 UNITS "byte/s" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.25 |
hpnicfDot11StationWmmModeRepresents the QoS mode of station. The following values are supported: wmm - This QoS function is supported by this station. nonwmm - This QoS function is not supported by this station.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.26 |
hpnicfDot11StationSecIEStatusRepresents the security Information element for this station.ro HpnicfDot11SecIEStatusType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.27 |
hpnicfDot11StationUpTimeTicksRepresents how long this station has been associated with this device.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.28 |
hpnicfDot11StationRadioMode2Represents which radio type supported by the station. The WLAN system support the following possible radio types. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a station,it could support only one radio type at the same time.ro HpnicfDot11RadioType2 (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.29 |
hpnicfDot11StationAssTimeRepresents the time at which the station connected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.30 |
hpnicfDot11StationUserAuthTypeRepresents the type of user authentication with this station. portalAuth - The authentication lunched by portal pop-up program which is need input username and passward,exclude MAC authentication. authFree - There is no need others authentiaction,user will surf internet after association. associateAuth - Include WEP PSK 802.1X authentication. macAuth - MAC Authentication apply with access device, a Remote Authentication Dial-In User Service (RADIUS) server or message netgate to realize fast authentication.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.31 |
hpnicfDot11StationRfPingTestThis object is used to start rfping test of the station. It will return false for get operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.32 |
hpnicfDot11StationMaxRateRepresents the max negotiation rate of the station.ro Integer32 UNITS "Mbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.33 |
hpnicfDot11StationPowerSaveModeCMRepresents the power management mode of the client. The following values are supported: active - This client is not in power-save mode and it is actively sending or receiving data. powersave - This client is in power-save mode and it wakes up after some time to check for buffer data.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.34 |
hpnicfDot11StationAuthenModeCMRepresents the authentication mode defined by 802.11. The following values are supported: opensystem - Do not authenticate. sharedkey - System will use challenge message to authenticate the client.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.35 |
hpnicfDot11StationAKMModeCMRepresents the key management mode defined by 802.11i. The following values are supported: none - no key management mode configured, psk - pre-shared key authentication, radius - 802.1x authentication, wlanex - wlanex.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.36 |
hpnicfDot11StationSecurityCiphersCMRepresents the frame encryption cipher type used by station. The following values are supported: none - clear text or no cipher method is configure, wep40 - 40-bit WEP key, wep104 - 104-bit WEP key, tkip - WPA Temporal Key encryption, aesccmp - WPA AES CCMP encryption, wpisms4 - ext encryption.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.37 |
hpnicfDot11StationSecIEStatusCMRepresents the security Information element for this station. The following values are supported: none - both wpa and wpa2 are disabled, wpa - only enable wpa, wpa2 - only enable wpa2, wlanex - only enable wlanex.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.1.1.38 |
hpnicfDot11StationAPRelationTableThis table contains relation-ship between station, AP, Radio and WLANID, and the detailed information of station is kept in the hpnicfDot11StaAssociateTable table. SEQUENCE OF HpnicfDot11StationAPRelationEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2 |
hpnicfDot11StationAPRelationEntryEach entry contains relation-ship information with AP, Radio and WLANID of each station. HpnicfDot11StationAPRelationEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1 |
hpnicfDot11CurrAPIDTo uniquely identify each AP, and relation-ship between hpnicfDot11CurrAPID and AP device will be static.ro HpnicfDot11ObjectIDType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.1 |
hpnicfDot11CurrRadioIDRepresents each radio.ro HpnicfDot11RadioScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.2 |
hpnicfDot11CurrWlanIDRepresents WLAN ID of the BSS the station associated to.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.3 |
hpnicfDot11CurrAntennaIDRepresents Antenna ID of the station associated to.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.2.1.4 |
hpnicfDot11StationStatisTableThis table contains statistics and status of all stations in the hpnicfDot11StaAssociateTable. SEQUENCE OF HpnicfDot11StationStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3 |
hpnicfDot11StationStatisEntryThis entry contains statistics and status for each station. HpnicfDot11StationStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1 |
hpnicfDot11StationRxFrameCntRepresents the count of frames that are received by AP from station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.1 |
hpnicfDot11StationTxFrameCntRepresents the count of frames that are sent to station from AP.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.2 |
hpnicfDot11StationDropFrameCntRepresents the count of frames that are dropped.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.3 |
hpnicfDot11StationRxFrameBytesRepresents the count of bytes that are received by AP from station.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.4 |
hpnicfDot11StationTxFrameBytesRepresents the count of bytes that are sent to station from AP.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.5 |
hpnicfDot11StationDropFrameBytesRepresents how many bytes are dropped.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.6 |
hpnicfDot11StationRxRetryPktsRepresents the count of frames that are retransmitted to AP from station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.7 |
hpnicfDot11StationTxRetryPktsRepresents the count of frames that are retransmitted to station from AP.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.8 |
hpnicfDot11StationRxRetryBytesRepresents the count of bytes that are retransmitted to AP from station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.9 |
hpnicfDot11StationTxRetryBytesRepresents the count of bytes that are retransmitted to station from AP.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.10 |
hpnicfDot11StationThroughputRepresents how many payload bytes of data frame are sent and received by station.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.11 |
hpnicfDot11StationSuccessTxCntRepresents how many frames have been successfully sent to station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.12 |
hpnicfDot11StationSuccessTxDataCntRepresents how many data frames have been successfully sent to station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.13 |
hpnicfDot11StationRxDataFrameCntRepresents how many data frames have been received from station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.14 |
hpnicfDot11StationTxDataFrameCntRepresents how many data frames have been sent to station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.15 |
hpnicfDot11StationRxDataFrameBytesRepresents how many bytes of data frames have been received from station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.16 |
hpnicfDot11StationTxDataFrameBytesRepresents how many bytes of data frames have been sent to station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.17 |
hpnicfDot11StationRxFragCntRepresents the number of fragmented data frames that received from station.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.18 |
hpnicfDot11StaRxErrDataFrameCntRepresents the count of error data frames that are received by AP from station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.19 |
hpnicfDot11StaTxRetryDataFrameCntRepresents the count of data frames that are retransmitted to station from AP.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.20 |
hpnicfDot11StaTxDataRatePktsRepresents how many data frames of each rate have been received from station.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.21 |
hpnicfDot11StaRxDataRatePktsRepresents how many data frames of each rate have been sent to station.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.22 |
hpnicfDot11StaTxSignalStrengthPktsRepresents how many data frames of different signal strength have been received from station.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.23 |
hpnicfDot11StaInternetRxFrameBytesInternet traffic bytes received from station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.24 |
hpnicfDot11StaInternetTxFrameBytesInternet traffic bytes sent to station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.25 |
hpnicfDot11StaLocalRxFrameBytesLocal traffic bytes received from station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.26 |
hpnicfDot11StaLocalTxFrameBytesLocal traffic bytes sent to station.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.3.1.27 |
hpnicfDot11StationRfPingTableThis table contains statistics of all stations in the hpnicfDot11StationRfPingTable. SEQUENCE OF HpnicfDot11StationRfPingEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4 |
hpnicfDot11StationRfPingEntryThis entry contains statistics for each station's RfPing results. HpnicfDot11StationRfPingEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1 |
hpnicfDot11StationRfPingIndexRepresents the rate index for the station. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.1 |
hpnicfDot11StationRfPingRateRepresents the rate at which the radio interface sends wireless ping frames.ro OCTET STRING UNITS "Mbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.2 |
hpnicfDot11StationRfPingTxCntRepresents the number of wireless ping frames that the radio interface sent.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.3 |
hpnicfDot11StationRfPingRxCntRepresents the number of wireless ping frames that the radio interface received from the client.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.4 |
hpnicfDot11StationRfPingRssiRepresents the client signal strength detected by the AP.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.5 |
hpnicfDot11StationRfPingRetriesRepresents the total number of retransmitted ping frames.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.6 |
hpnicfDot11StationRfPingRttRound-trip time (RTT) from the time when the radio interface send a ping packet to the time when it receives a response from the client.ro Integer32 UNITS "ms" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.1.4.1.7 |
hpnicfDot11StationNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2 |
hpnicfDot11StationTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0 |
hpnicfDot11StationMICErrorTrapThis notification is to indicate the occurrence of a MIC failure in a certain station. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.1 |
hpnicfDot11StationAuthenErrorTrapThis notification is to indicate which station happened authentication failure. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.2 |
hpnicfDot11StationAuthorFailTrapThis trap is sent if a station authorization fails. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.3 |
hpnicfDot11StationAssocFailTrapThis trap is sent if a station association fails. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.4 |
hpnicfDot11StationDeAssocTrapThis trap is sent if a station de-association occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.5 |
hpnicfDot11StationAuthorSuccTrapThis trap is sent when a station is authorized successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.6 |
hpnicfDot11StationRoamingTrapThis trap is sent when a station roamed successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.7 |
hpnicfDot11StationDisconnectTrapThis notification is sent when station disconnects with AP. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.8 |
hpnicfDot11UserDisconnectTrapThis notification is sent when user disconnects with AP. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.0.9 |
hpnicfDot11StationTrapVarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1 |
hpnicfDot11StationTrapBSSIDRepresents on which BSSID of AP the event happened.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.1 |
hpnicfDot11StationTrapStaMACRepresents the MAC address of station which happened message integrity check (MIC) errors.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.2 |
hpnicfDot11StationSessionStartTimeRepresents the time at which the station connected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.3 |
hpnicfDot11StationAssocFailCauseRepresents the cause of the station association failure.ro HpnicfDot11AssocFailType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.4 |
hpnicfDot11StationAuthorFailCauseRepresents the cause of the station authorization failure.ro HpnicfDot11AuthorFailType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.5 |
hpnicfDot11StationFailCauseDescRepresents the failure description of the station.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.6 |
hpnicfDot11StationSessionDurationRepresents the duration of the station sesssion.ro Unsigned32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.7 |
hpnicfDot11StationRoamingTimeRepresents the time at which the station roamed.ro Unsigned32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.8 |
hpnicfDot11StationACIPAddressFor roam-in station, it represents the ip address of home AC. For roam-out station, it represents the ip address of foreign AC.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.9 |
hpnicfDot11StationAPNameName of the AP which the station connects to.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.10 |
hpnicfDot11StationBSSIDBSSID which the station connects to.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.11 |
hpnicfDot11StaDisconnectReasonReason why the station disconnects with the AP.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.12 |
hpnicfDot11StationAuthModeRepresents station's authentication mode.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.13 |
hpnicfDot11StationACIPv6AddFor roam-in station, it represents the IPv6 address of home AC. For roam-out station, it represents the IPv6 address of foreign AC.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.14 |
hpnicfDot11UserNameRepresents the user name.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.15 |
hpnicfDot11StationTrapAPMacAddressRepresents the MAC address of an AP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.3.2.1.16 |