HPN-ICF-DOT11-SA-MIB
AI MIB Summary
The HPN-ICF-DOT11-SA-MIB enables monitoring of HP ProCurve Access Points to retrieve spectrum analysis metrics, specifically quantifying radio frequency interference sources, channel quality degradation, and packet transmission contention within the 2.4 GHz and 5 GHz bands.
This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.
Main OID:
hpnicfDot11Sa.1.3.6.1.4.1.11.2.14.11.15.2.75.13
61
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
61 total| Object Name |
|---|
hpnicfDot11SaThis MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.75.13 |
hpnicfDot11SaCfgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1 |
hpnicfDot11SaCfgTableThis table is used to configure spectrum analysis. SEQUENCE OF HpnicfDot11SaCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1 |
hpnicfDot11SaCfgEntryThis entry contains the spectrum analysis configuration. HpnicfDot11SaCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1 |
hpnicfDot11SaCfgRadioTypeRepresents the radio type of the configuration. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.1 |
hpnicfDot11SaEnableRepresents whether spectrum analysis is enabled globally.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.2 |
hpnicfDot11SaRptDevTypeRepresents which types of interference devices should be reported.rw Bits .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.3 |
hpnicfDot11SaTrapDevEnableRepresents whether the interference device trap is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.4 |
hpnicfDot11SaTrapDevTypeRepresents which types of interference device will send traps when the interference device trap is enabled.rw Bits .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.5 |
hpnicfDot11SaTrapAQEnableRepresents whether the air quality trap is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.6 |
hpnicfDot11SaTrapAQThresholdRepresents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.7 |
hpnicfDot11SaDrivenRRMEnableConfigure whether to trigger RRM to run when an access point detects a certain level of interference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.8 |
hpnicfDot11SaDrivenRRMSntConfigure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.13.1.1.1.9 |
hpnicfDot11SaStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2 |
hpnicfDot11SaRtFFTDataTableThis table contains the real-time FFT data for spectrum analysis. SEQUENCE OF HpnicfDot11SaRtFFTDataEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1 |
hpnicfDot11SaRtFFTDataEntryThis entry contains the real-time FFT data for spectrum analysis. HpnicfDot11SaRtFFTDataEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1 |
hpnicfDot11SaAPIDRepresents the serial ID of the AP. HpnicfDot11ObjectIDType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.1 |
hpnicfDot11SaRadioIDRepresents the ID of the radio. HpnicfDot11RadioScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.2 |
hpnicfDot11SaRtDataGroupIDRepresents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.3 |
hpnicfDot11SaFrequencyRepresents the frequency number in 100 Hz. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.4 |
hpnicfDot11SaRtFreqPowerRepresents the power of the frequency point.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.5 |
hpnicfDot11SaRtFreqMaxPowerRepresents the max power of the frequency point.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.6 |
hpnicfDot11SaRtFreqDutyCycleRepresents the duty cycle of the frequency point.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.7 |
hpnicfDot11SaRtFreqDataSeqNoRepresents the sequence number of the data.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.1.1.8 |
hpnicfDot11SaIntfDevTableThis table contains the information of the interfering devices. SEQUENCE OF HpnicfDot11SaIntfDevEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2 |
hpnicfDot11SaIntfDevEntryThis entry contains the information of the interfering devices. HpnicfDot11SaIntfDevEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1 |
hpnicfDot11SaDevIDRepresents the device identification number that uniquely identified the interfering device. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.1 |
hpnicfDot11SaDevTypeRepresents type of the interferer.ro HpnicfDot11SaIntfDevType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.2 |
hpnicfDot11SaDevSIRepresents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.3 |
hpnicfDot11SaDevRSSIRepresents receive signal strength indicator (RSSI) of interfering device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.4 |
hpnicfDot11SaDevDutyCycleRepresents proportion of time in percentage during which the interfering device was active.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.5 |
hpnicfDot11SaDevAffectedChlsRepresents channels that the interfering device affects.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.6 |
hpnicfDot11SaDevDetectedTimeRepresents time at which the interference was detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.2.1.7 |
hpnicfDot11SaAirQualityTableThis table contains the air quality of the channels. SEQUENCE OF HpnicfDot11SaAirQualityEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3 |
hpnicfDot11SaAirQualityEntryThis entry contains the air quality of the channels. HpnicfDot11SaAirQualityEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1 |
hpnicfDot11SaChlNumRepresents the radio channel where the air quality is monitored. HpnicfDot11ChannelScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.1 |
hpnicfDot11SaAvgQualityRepresents the average air quality for this radio channel.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.2 |
hpnicfDot11SaMinQualityRepresents the minimum air quality for this radio channel.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.3 |
hpnicfDot11SaIntfDevNumRepresents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.4 |
hpnicfDot11SaWiFiUtilRepresents the percentage of the channel currently being used by Wi-Fi devices.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.5 |
hpnicfDot11SaNonWiFiUtilRepresents the percentage of the channel currently being used by non-Wi-Fi interference.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.6 |
hpnicfDot11SaNoiseFloorRepresents current noise floor recorded on the channel.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.2.3.1.7 |
hpnicfDot11SaNotifyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3 |
hpnicfDot11SaTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0 |
hpnicfDot11SaIntfDevDetectedInterfering device is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.1 |
hpnicfDot11SaIntfDevDisappearInterfering device disappeared. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.2 |
hpnicfDot11SaChlQltLowThe quality of the channel is below the specified threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.3 |
hpnicfDot11SaChlQltRecoverThe quality of the channel recovered from low status. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.0.4 |
hpnicfDot11SaTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1 |
hpnicfDot11SaTrapAPIDRepresents the identifier of the AP.ro HpnicfDot11ObjectIDType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.1 |
hpnicfDot11SaTrapRadioIDRepresents the identifier of the radio.ro HpnicfDot11RadioScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.2 |
hpnicfDot11SaTrapDevIDRepresents the device identification number that uniquely identified the interfering device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.3 |
hpnicfDot11SaTrapIntfDevTypeRepresents type of the interferer.ro HpnicfDot11SaIntfDevType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.4 |
hpnicfDot11APTrapDevSIRepresents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe).ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.5 |
hpnicfDot11SaTrapDevRSSIRepresents receive signal strength indicator (RSSI) of interfering device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.6 |
hpnicfDot11APTrapDevDCRepresents proportion of time in percentage during which the interfering device was active.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.7 |
hpnicfDot11APTrapDevChlsRepresents channels that the interfering device affects.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.8 |
hpnicfDot11APTrapDevDctTimeRepresents time at which the interference was detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.9 |
hpnicfDot11SaTrapChlNumRepresents the radio channel where the air quality is monitored.ro HpnicfDot11ChannelScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.10 |
hpnicfDot11SaTrapChlQltRepresents the quality for this radio channel.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.11 |
hpnicfDot11SaTrapChlIntfNumRepresents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.13.3.1.12 |