HPN-ICF-MPLSOAM-MIB
AI MIB Summary
The HPN-ICF-MPLSOAM-MIB module manages HP ProCurve/Aruba ICF (Intelligent Control Framework) devices to configure and monitor MPLS Operation, Administration, and Maintenance (OAM) parameters, specifically enabling fault detection, continuity checks, and performance monitoring for MPLS label-switched paths.
This MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS.
Main OID:
hpnicfMplsOam.1.3.6.1.4.1.11.2.14.11.15.2.79
35
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
hpnicfMplsOamThis MIB contains objects to configure OAM module. The Operation, Administration and Maintenance (OAM) is an effective means for decreasing the cost of network maintenance. The MPLS OAM is used to administrate and maintain MPLS. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.79 |
hpnicfMplsOamScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.79.1 |
hpnicfMplsOamCapabilityWhether OAM is globally capable. false: incapable; true: capable; The default value is incapable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.79.1.1 |
hpnicfMplsOamTrapOpenWhether OAM trap is globally enabled. false: disable; true: enable; The default value is disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.79.1.2 |
hpnicfMplsOamTable OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.79.2 |
hpnicfMplsOamIgrTableThis table specifies per-LSP MPLS OAM ingress capability and associated information, such as IgrLspName and IgrDetType. SEQUENCE OF HpnicfMplsOamIgrEntry .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1 |
hpnicfMplsOamIgrEntryAn entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at ingress. HpnicfMplsOamIgrEntry .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1 |
hpnicfMplsOamIgrIndexThis is an unique index for an OAM ingress entry in the OAM table. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.1 |
hpnicfMplsOamIgrLspNameThe name of an LSP. It means the LSP name of the detected LSP.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.2 |
hpnicfMplsOamIgrDetectTypeThere are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.3 |
hpnicfMplsOamIgrDetectFreqIndication of the OAM's frequent type.rw HpnicfMplsOAMDetectFreq .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.4 |
hpnicfMplsOamIgrRevTypeWhen an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only by the oam ingress; If shared, the reverse LSP which is shared between many forward LSPs, whose source LSRs are the same and sink LSRs are the same. 1: private; 2: share.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.5 |
hpnicfMplsOamIgrRevLspNameThe object indicates the name of the reverse LSP.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.6 |
hpnicfMplsOamIgrLspIdFor ingress, the object indicates the lsp ID of the detected LSP.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.7 |
hpnicfMplsOamIgrEnableWhether one LSP is OAM enable. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the ingress; true: The OAM function is enabled on the ingress.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.8 |
hpnicfMplsOamIgrDefectTypeIndication of the OAM's defect type.ro HpnicfMplsOAMDefectType .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.9 |
hpnicfMplsOamIgrRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamIgrLspName, hpnicfMplsOamIgrDetectType, hpnicfMplsOamIgrDetectFreq, hpnicfMplsOamIgrRevType, hpnicfMplsOamIgrRevLspName, and hpnicfMplsOamIgrLspId must be specified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.79.2.1.1.10 |
hpnicfMplsOamEgrTableThis table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency. SEQUENCE OF HpnicfMplsOamEgrEntry .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2 |
hpnicfMplsOamEgrEntryAn entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress. HpnicfMplsOamEgrEntry .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1 |
hpnicfMplsOamEgrIndexThis is a unique index for an OAM egress entry in the OAM table. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.1 |
hpnicfMplsOamEgrLspNameThe object indicates the name of static LSP at egress.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.2 |
hpnicfMplsOamEgrDetectTypeThere are two types of OAM packets, CV and FFD. The CV flow is generated at the source LSR of the LSP with a nominal frequency of 1/s and terminated at the sink LSR of the LSP. FFD provides failure detection option for an LSP independent of the CV based availability model and is not tied to the CV insertion rate. Insertion rates at 1/s or faster may also be used. The CV/FFD packet contains a network-unique identifier (TTSI) so that all types of defects can be detected. 1: CV; 2: FFD.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.3 |
hpnicfMplsOamEgrDetectFreqIndication of the OAM's frequent type.rw HpnicfMplsOAMDetectFreq .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.4 |
hpnicfMplsOamEgrRevTypeWhen an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP, the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 1: private; 2: share.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.5 |
hpnicfMplsOamEgrRevLspNameThe object indicates the name of a reverse static-lsp.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.6 |
hpnicfMplsOamEgrLsrIdThe object indicates the Ingress LSR ID of the LSP.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.7 |
hpnicfMplsOamEgrLspIdThe object indicates the the Ingress session lsp ID of the detected static-LSP.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.8 |
hpnicfMplsOamEgrEnableWhether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and user can set other configuration. false: The OAM function is disabled on the egress; true: The OAM function is enabled on the egress.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.9 |
hpnicfMplsOamEgrDefectTypeIndication of the OAM's defect type.ro HpnicfMplsOAMDefectType .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.10 |
hpnicfMplsOamEgrRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsOamEgrLspName, hpnicfMplsOamEgrDetectType, hpnicfMplsOamEgrDetectFreq, hpnicfMplsOamEgrRevType, hpnicfMplsOamEgrRevLspName, hpnicfMplsOamEgrLsrId and hpnicfMplsOamEgrLspId must be specified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.79.2.2.1.11 |
hpnicfMplsOamNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.79.3 |
hpnicfMplsOamIgrLSPOutDefectThis notification is generated when the LSP is found out of the defect state at the LSP ingress. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.79.3.1 |
hpnicfMplsOamIgrLSPInDefectThis notification is generated when the LSP is found in the defect state at the LSP ingress. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.79.3.2 |
hpnicfMplsOamEgrLSPOutDefectThis notification is generated when the LSP is found out of the defect state at the LSP egress. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.79.3.3 |
hpnicfMplsOamEgrLSPInDefectThis notification is generated when the LSP is found in the defect state at the LSP egress. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.79.3.4 |