HPN-ICF-EVB-MIB
EVB management information base for managing devices that support Ethernet Virtual Bridging. This MIB is an extension of IEEE8021-EVB-MIB.
Main OID:
hpnicfEvb.1.3.6.1.4.1.11.2.14.11.15.2.134
56
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
hpnicfEvbEVB management information base for managing devices that support
Ethernet Virtual Bridging. This MIB is an extension of
IEEE8021-EVB-MIB. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.134 |
hpnicfEvbSysObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.134.1 |
hpnicfEvbSetResultIf a set operation on EVB-MIB-tables returns success, this object
indicates the actual result of this operation. Otherwise, it is
meaningless.
unknown: The set operation on the node has been completed, but the
result could only be got from the table which the set
operation happended.
processing: The set operation is in process. Another set operation
cannot be performed at this time.
success: The set operation has succeeded.
failed: The set operation has failed.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.134.1.1 |
hpnicfEvbDefaultManagerTableA table that contains configuration information for the default
Virtual Station Interface (VSI) manager. SEQUENCE OF HpnicfEvbDefaultManagerEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2 |
hpnicfEvbDefaultManagerEntryA list of objects containing information for the default VSI manager. HpnicfEvbDefaultManagerEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1 |
hpnicfEvbManagerIndexIndex of the default manager table. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.1 |
hpnicfEvbManagerTypeType of the default VSI manager.
ipv4: Specifies the IPv4 address of the default VSI manager.
ipv6: Specifies the IPv6 address of the default VSI manager.
name: Specifies the name of the default VSI manager, a
case-insensitive string of 1 to 127 characters.
local: Specifies the device as the default VSI manager.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.2 |
hpnicfEvbManagerIDDefault VSI manager.
The value is zero-length string when the VSI manager type is 'local'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.3 |
hpnicfEvbManagerPortPort number of the default VSI manager.
Optional when the VSI manager type is not 'local'.
If the VSI manager type is 'local', it returns zero.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.4 |
hpnicfEvbManagerRowStatusRow status: CreateAndGo, Active, or Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.1.2.1.5 |
hpnicfEvbPortObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.134.2 |
hpnicfEvbPortConfigTableA table that contains configuration information for the EVB bridge
port. SEQUENCE OF HpnicfEvbPortConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.1 |
hpnicfEvbPortConfigEntryA list of objects containing information for the EVB bridge port. HpnicfEvbPortConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1 |
hpnicfEvbPortNumberPort number. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.1 |
hpnicfEvbRWDVDP resource wait delay exponent.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.2 |
hpnicfEvbRKAVDP keepalive exponent.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.2.1.1.3 |
hpnicfEvbSchannelConfigTableA table that contains configuration information for the S-channel. SEQUENCE OF HpnicfEvbSchannelConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2 |
hpnicfEvbSchannelConfigEntryA list of objects containing information for the S-channel. HpnicfEvbSchannelConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1 |
hpnicfEvbSchannelIDS-channel ID. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.1 |
hpnicfEvbSchannelSVLANS-VLAN ID. 0 means that the S-channel is not bound to any S-VLAN.
1 represents the SVID for the default S-channel S-channel 1.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.2 |
hpnicfEvbMacLearningStatusThe MAC address learning function is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.3 |
hpnicfEvbRRStatusThe RR mode for the S-channel is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.4 |
hpnicfEvbSchannelRowStatusRow status: CreateAndGo, Active, or Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.2.1.5 |
hpnicfEvbVSIConfigTableA table that contains configuration information for the VSI. SEQUENCE OF HpnicfEvbVSIConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3 |
hpnicfEvbVSIConfigEntryA list of objects containing information for the VSI. HpnicfEvbVSIConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1 |
hpnicfEvbSBPPortNumberThe Station-facing Bridge Port (SBP) port number. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.1 |
hpnicfEvbVSILocalIDVSI local ID. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.2 |
hpnicfEvbVSICommandThis object indicates the association or pre-associate property of the
VSI.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.3 |
hpnicfEvbVSIIfIndexVSI interface index.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.4 |
hpnicfEvbVSIIsActiveThe VSI is activated or not. Activate a VSI after configuring a VSI
filter, and deactivate a VSI before removing a VSI filter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.5 |
hpnicfEvbVSIRowStatusRow status: CreateAndGo, Active, or Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.3.1.6 |
hpnicfEvbVSIFilterConfigTableA table that contains configuration information for filters of the
VSI. SEQUENCE OF HpnicfEvbVSIFilterConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.4 |
hpnicfEvbVSIFilterConfigEntryA list of objects containing information for filters of the VSI. HpnicfEvbVSIFilterConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1 |
hpnicfEvbGroupIDGroup ID. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.1 |
hpnicfEvbVSIMacThe MAC address part of the MAC/VLANs for a VSI. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.2 |
hpnicfEvbVSIVlanIdThe VLAN ID part of the MAC/VLANs for a VSI. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.3 |
hpnicfEvbVSIFilterRowStatusRow status: CreateAndGo, Active, or Destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.2.4.1.4 |
hpnicfFlex10Objects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.134.3 |
hpnicfFlex10PortConfigTableA table that contains configuration information for the flex10 bridge
port. SEQUENCE OF HpnicfFlex10PortConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.3.1 |
hpnicfFlex10PortConfigEntryA list of objects containing information for the flex10 bridge port. HpnicfFlex10PortConfigEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1 |
hpnicfFlex10PortNumberPort number. IEEE8021BridgePortNumber (IEEE8021-TC-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1.1 |
hpnicfFlex10PortEnableStatusThe flex10 function is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.134.3.1.1.2 |
hpnicfFlex10RemoteSchannelTableA table that contains remote S-channel details. SEQUENCE OF HpnicfFlex10RemoteSchannelEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2 |
hpnicfFlex10RemoteSchannelEntryA list of objects describing remote S-channels. HpnicfFlex10RemoteSchannelEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1 |
hpnicfFlex10RemSchDesFormatDescription format of the remote S-channel.ro Bits .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.1 |
hpnicfFlex10RemSchTerminationTypeTermination type of the remote S-channel.
0: PCI Physical Function (Primary).
1: SRIOV Virtual Function.
2: PCI Physical Function (Secondary).
3: Virtual Switch Port.
4: NCSI Port.
2147483647: This value means a Description TLV with format 0 has not
been received.
other: Unknown termination type.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.2 |
hpnicfFlex10RemSchTerminationCapTermination capabilities of the remote S-channel. If a Description
TLV with format 0 has not been received, it returns all zeros.ro Bits .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.3 |
hpnicfFlex10RemSchTrafficClassTraffic classes of the remote S-channel. If a Description TLV with
format 0 has not been received, it returns all zeros.ro Bits .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.4 |
hpnicfFlex10RemSchCirCommitted Information Rate (CIR) of the remote S-channel. If a
Description TLV with format 0 has not been received, it returns 0.ro Integer32 UNITS "mbps" .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.5 |
hpnicfFlex10RemSchPirPeak Information Rate (PIR) of the remote S-channel. If a Description
TLV with format 0 has not been received, it returns 0.ro Integer32 UNITS "mbps" .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.6 |
hpnicfFlex10RemSchConnectionIDConnection instance ID of the remote S-channel.
The value is a zero-length string if a Description TLV with format 1
has not been received. Otherwise it returns a string with length 16.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.134.3.2.1.7 |
hpnicfFlex10SchannelLinkCtlTableA table that contains link status information for the S-channel. SEQUENCE OF HpnicfFlex10SchannelLinkCtlEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.3.3 |
hpnicfFlex10SchannelLinkCtlEntryA list of objects containing information for the S-channel. HpnicfFlex10SchannelLinkCtlEntry .1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1 |
hpnicfFlex10SchannelSVIDS-VLAN ID for the S-channel.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.1 |
hpnicfFlex10SchannelLocalStatusLink status of the local S-channel.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.2 |
hpnicfFlex10SchannelRemoteStatusLink status of the remote S-channel.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.134.3.3.1.3 |
More MIBs from HP
Browse all HPMIBs →BLADETYPE6-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE6-NETWORK-MIB.
2263 objects→
BLADETYPE5-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240 objects→
BLADETYPE4-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE4-NETWORK-MIB.
2226 objects→
HPN-ICF-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HPIPFTRAP-MIB
Standard SNMP MIB module defining data structures for HPIPFTRAP-MIB.
1186 objects→
BLADETYPE2-NETWORK-MIB
The BLADETYPE2-NETWORK-MIB module provides SNMP access to Layer 3 configuration parameters, interface statistics, and routing information for blade server network interfaces. It enables monitoring of IP address assignments, interface operational states, and packet counters specific to the blade chassis network subsystem.
1056 objects→