HPN-ICF-EPON-MIB
The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
Main OID:
hpnicfEponMibObjects.1.3.6.1.4.1.11.2.14.11.15.2.42.1
424
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
424 total| Object Name |
|---|
hpnicfEponMibObjectsThe objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.42.1 |
hpnicfEponSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1 |
hpnicfEponAutoAuthorizeThis value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.1 |
hpnicfEponMonitorCycleThe cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.2 |
hpnicfEponMsgTimeOutTimeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.3 |
hpnicfEponMsgLoseNumThe times of messages sending timeouts, after which OLT will reset (applying to every OLT).rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.4 |
hpnicfEponSysHasEPONBoardtrue(1) - At least an EPON board exists. false(2) - No EPON board exists.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.5 |
hpnicfEponMonitorCycleEnableStop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.6 |
hpnicfEponOltSoftwareErrAlmEnableSoftware error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.7 |
hpnicfEponPortLoopBackAlmEnableLoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.8 |
hpnicfEponMonitorCycleMinValThe lower limit of cycle which be confined to the hpnicfEponMonitorCycle.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.9 |
hpnicfEponMonitorCycleMaxValThe upper limit of cycle which be confined to the hpnicfEponMonitorCycle.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.10 |
hpnicfEponMsgTimeOutMinValThe lower limit of timeout which be confined to the hpnicfEponMsgTimeOut.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.11 |
hpnicfEponMsgTimeOutMaxValThe upper limit of timeout which be confined to the hpnicfEponMsgTimeOut.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.12 |
hpnicfEponMsgLoseNumMinValThe lower limit of time which be confined to the hpnicfEponMsgLoseNum.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.13 |
hpnicfEponMsgLoseNumMaxValThe upper limit of time which be confined to the hpnicfEponMsgLoseNum.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.14 |
hpnicfEponSysScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.15 |
hpnicfEponSysManTableThis table defines system related parameters. SEQUENCE OF HpnicfEponSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16 |
hpnicfEponSysManEntryThe entry of the table hpnicfEponSysManTable. HpnicfEponSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1 |
hpnicfEponSlotIndexSlot Index, the index of hpnicfEponSysManTable. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.1 |
hpnicfEponModeSwitchcmode - epon standard mode. hmode - private mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.2 |
hpnicfEponAutomaticModeAutomatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.3 |
hpnicfEponOamDiscoveryTimeoutTime out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.4 |
hpnicfEponEncryptionNoReplyTimeOutEncryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.5 |
hpnicfEponEncryptionUpdateTimeEncryption key update timer for all ONUs on slot, indicated by hpnicfEponSlotIndex, ranging from 1 to 255, measured in seconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.6 |
hpnicfEponAutoBindStatusenable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.16.1.7 |
hpnicfEponAutoUpdateTableEPON auto update ONU application configuration. SEQUENCE OF HpnicfEponAutoUpdateEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17 |
hpnicfEponAutoUpdateEntryThe entry of the table hpnicfEponAutoUpdateTable. HpnicfEponAutoUpdateEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1 |
hpnicfEponAutoUpdateFileNameThe name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.1 |
hpnicfEponAutoUpdateSchedStatusThe status of schedule update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.2 |
hpnicfEponAutoUpdateSchedTimeThe schedule update timing configuration is related to the hpnicfEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hpnicfEponAutoUpdateSchedStatus is enabled.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.3 |
hpnicfEponAutoUpdateSchedTypeThe update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.4 |
hpnicfEponAutoUpdateRealTimeStatusThe status of real time update configuration. The hpnicfEponAutoUpdateFileName must be set before enable hpnicfEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.17.1.5 |
hpnicfEponOuiIndexNextTableNext OUI index table. SEQUENCE OF HpnicfEponOuiIndexNextEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18 |
hpnicfEponOuiIndexNextEntryThe entry of the table hpnicfEponOuiIndexNextTable. HpnicfEponOuiIndexNextEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1 |
hpnicfEponOuiIndexNextThis object contains an appropriate value to be used for hpnicfEponOuiIndex when creating rows in the hpnicfEponOuiTable.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.18.1.1 |
hpnicfEponOuiTableList of OUI and OAM supported by OLT. SEQUENCE OF HpnicfEponOuiEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19 |
hpnicfEponOuiEntryThe entry of the table hpnicfEponOuiTable. HpnicfEponOuiEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1 |
hpnicfEponOuiIndexThe index of this table. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.1 |
hpnicfEponOuiValueOUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.2 |
hpnicfEponOamVersionVersion of OAM protocol defined by the organization denoted by OUI.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.3 |
hpnicfEponOuiRowStatusThe status of this table entry. Only active, createAndGo and the destory are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.19.1.4 |
hpnicfEponMulticastControlTableMulticast control global configuration. SEQUENCE OF HpnicfEponMulticastControlEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20 |
hpnicfEponMulticastControlEntryThe entry of the table hpnicfEponMulticastControlTable. HpnicfEponMulticastControlEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1 |
hpnicfEponMulticastVlanIdThe index of this table. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.1 |
hpnicfEponMulticastAddressListThe multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.2 |
hpnicfEponMulticastStatusThe status of this table entry. Only active, createAndGo and the destory are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.1.20.1.3 |
hpnicfEponFileName OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.2 |
hpnicfEponDbaUpdateFileNameThe name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.1 |
hpnicfEponOnuUpdateFileNameThe filename of the ONU firmware to be updated. Note that the filename must contain the file path.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.2.2 |
hpnicfEponOltMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3 |
hpnicfOltSysManTableThis table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result SEQUENCE OF HpnicfOltSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1 |
hpnicfOltSysManEntryThe entry of the table hpnicfOltSysManTable. HpnicfOltSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1 |
hpnicfOltLaserOnTimeThe laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.1 |
hpnicfOltLaserOffTimeThe laser off time of the ONUs during the discovery process, measured in TQ.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.2 |
hpnicfOltMultiCopyBrdCasttrue/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.3 |
hpnicfOltEnableDiscardPacketForward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.4 |
hpnicfOltSelfTestselftest(1): Test OLT to check whether it's OK.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.5 |
hpnicfOltSelfTestResultThe self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.6 |
hpnicfOltMaxRttSet the max Round Trip Time of this OLT.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.1.1.7 |
hpnicfOltInfoTablePrimary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hpnicfOltFirmMajorVersion, hpnicfOltFirmMinorVersion, hpnicfOltHardMajorVersion, hpnicfOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hpnicfOltAgcLockTime, hpnicfOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hpnicfOltMacAddress, hpnicfOltWorkMode) SEQUENCE OF HpnicfOltInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2 |
hpnicfOltInfoEntryThe entry of the table hpnicfOltInfoTable. HpnicfOltInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1 |
hpnicfOltFirmMajorVersionOLT firmware major version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.1 |
hpnicfOltFirmMinorVersionOLT firmware minor version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.2 |
hpnicfOltHardMajorVersionOLT hardware major version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.3 |
hpnicfOltHardMinorVersionOLT hardware minor version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.4 |
hpnicfOltAgcLockTimePON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.5 |
hpnicfOltAgcCdrTimePON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown valuero Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.6 |
hpnicfOltMacAddressOLT MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.7 |
hpnicfOltWorkModeThe operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.8 |
hpnicfOltOpticalPowerTxThe optical power transmitted by this OLT. It measured in 0.01 dBm unit.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.9 |
hpnicfOltOpticalPowerRxThe burst optical power received by this OLT. It measured in 0.01 dBm unit.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.2.1.10 |
hpnicfOltDbaManTableThis table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT. SEQUENCE OF HpnicfOltDbaManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3 |
hpnicfOltDbaManEntryThe entry of the table hpnicfOltDbaManTable. HpnicfOltDbaManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1 |
hpnicfOltDbaEnabledTypeEnable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.1 |
hpnicfOltDbaDiscoveryLengthDiscovery length in TQ units.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.2 |
hpnicfOltDbaDiscovryFrequencyHow often should the OLT send discovery frames to the ONUs, measured in grant cycles.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.3 |
hpnicfOltDbaCycleLengthThe grant cycle length in TQ units.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.4 |
hpnicfOltDbaVersionDBA version of the OLT.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.5 |
hpnicfOltDbaUpdateUpdate(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hpnicfEponDbaUpdateFileName.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.6 |
hpnicfOltDbaUpdateResultThe latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.3.1.7 |
hpnicfOltPortAlarmThresholdTableThe table defines the alarm threshold of OLT. SEQUENCE OF HpnicfOltPortAlarmThresholdEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4 |
hpnicfOltPortAlarmThresholdEntryThe entry of the table hpnicfOltPortAlarmThresholdTable. HpnicfOltPortAlarmThresholdEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1 |
hpnicfOltPortAlarmBerEnabledBehavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.1 |
hpnicfOltPortAlarmBerDirectTraffic direction to monitor for BER alarm.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.2 |
hpnicfOltPortAlarmBerThresholdBER threshold exceed which the alarm is raised.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.3 |
hpnicfOltPortAlarmFerEnabledBehavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.4 |
hpnicfOltPortAlarmFerDirectTraffic direction to monitor for FER alarm.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.5 |
hpnicfOltPortAlarmFerThresholdFrame error rate exceed threshold then the alarm is raised.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.6 |
hpnicfOltPortAlarmLlidMismatchEnabledBehavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.7 |
hpnicfOltPortAlarmLlidMismatchThresholdThe minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.8 |
hpnicfOltPortAlarmRemoteStableEnabledBehavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.9 |
hpnicfOltPortAlarmLocalStableEnabledBehavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.10 |
hpnicfOltPortAlarmRegistrationEnabledBehavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.11 |
hpnicfOltPortAlarmOamDisconnectionEnabledBehavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.12 |
hpnicfOltPortAlarmEncryptionKeyEnabledBehavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.13 |
hpnicfOltPortAlarmVendorSpecificEnabledBehavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.14 |
hpnicfOltPortAlarmRegExcessEnabledBehavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.15 |
hpnicfOltPortAlarmDFEEnabledBehavior of device fatal error alarm. true - alarm enable. false - alarm disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.4.1.16 |
hpnicfOltLaserOnTimeMinValThe lower limit of time which is confined to hpnicfOltLaserOnTime.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.5 |
hpnicfOltLaserOnTimeMaxValThe upper limit of time which is confined to hpnicfOltLaserOnTime.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.6 |
hpnicfOltLaserOffTimeMinValThe lower limit of time which is confined to hpnicfOltLaserOffTime.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.7 |
hpnicfOltLaserOffTimeMaxValThe upper limit of time which is confined to hpnicfOltLaserOffTime.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.8 |
hpnicfOltDbaDiscoveryLengthMinValThe lower limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.9 |
hpnicfOltDbaDiscoveryLengthMaxValThe upper limit of the discovery length which is confined to hpnicfOltDbaDiscoveryLength.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.10 |
hpnicfOltDbaDiscovryFrequencyMinValThe lower limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.11 |
hpnicfOltDbaDiscovryFrequencyMaxValThe upper limit of the discovery length which is confined to hpnicfOltDbaDiscovryFrequency.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.12 |
hpnicfOltDbaCycleLengthMinValThe lower limit of the frames which is confined to hpnicfOltDbaCycleLength.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.13 |
hpnicfOltDbaCycleLengthMaxValThe upper limit of the frames which is confined to hpnicfOltDbaCycleLength.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.14 |
hpnicfOltPortAlarmLlidMisMinValThe lower limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.15 |
hpnicfOltPortAlarmLlidMisMaxValThe upper limit of the frames which is confined to hpnicfOltPortAlarmLlidMismatchThreshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.16 |
hpnicfOltPortAlarmBerMinValThe lower limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.17 |
hpnicfOltPortAlarmBerMaxValThe upper limit of threshold which is confined to hpnicfOltPortAlarmBerThreshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.18 |
hpnicfOltPortAlarmFerMinValThe lower limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.19 |
hpnicfOltPortAlarmFerMaxValThe upper limit of threshold which is confined to hpnicfOltPortAlarmFerThreshold.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.20 |
hpnicfOnuSilentTableThis table is used for getting silent ONU information of OLT. SEQUENCE OF HpnicfOnuSilentEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21 |
hpnicfOnuSilentEntryThe entry of the table hpnicfOnuSilentTable. HpnicfOnuSilentEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1 |
hpnicfOnuSilentMacAddrThe MAC address of silent ONUs in OLT. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.1 |
hpnicfOnuSilentTimeThe aging time of a silent ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.21.1.2 |
hpnicfOltUsingOnuTableThe table containing configurations to manage ONU interface(s) based on OLT interface. SEQUENCE OF HpnicfOltUsingOnuEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22 |
hpnicfOltUsingOnuEntryThe entry of the table hpnicfOltUsingOnuTable. HpnicfOltUsingOnuEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1 |
hpnicfOltUsingOnuNumThe ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.1 |
hpnicfOltUsingOnuIfIndexThe ifIndex of the ONU interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.2 |
hpnicfOltUsingOnuRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.3.22.1.3 |
hpnicfEponOnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5 |
hpnicfOnuSysManTableThis table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator. SEQUENCE OF HpnicfOnuSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1 |
hpnicfOnuSysManEntryThe entry of the table hpnicfOnuSysManTable. HpnicfOnuSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1 |
hpnicfOnuEncryptManStart encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.1 |
hpnicfOnuReAuthorizeRestart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.2 |
hpnicfOnuMulticastFilterStatustrue(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.3 |
hpnicfOnuDbaReportQueueSetNumberThe number of queue sets reported in MPCP report frames.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.4 |
hpnicfOnuRemoteFecStatusValue that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.5 |
hpnicfOnuPortBerStatusenable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.6 |
hpnicfOnuResetReboot ONU.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.7 |
hpnicfOnuMulticastControlModeigmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.8 |
hpnicfOnuAccessVlanThe VLAN ID assigned to untagged frames received on ONU.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.9 |
hpnicfOnuEncryptKeyThe encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.10 |
hpnicfOnuUniUpDownTrapStatustrue - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.11 |
hpnicfOnuFecStatusValue that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.12 |
hpnicfOnuMcastCtrlHostAgingTimeThe host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.13 |
hpnicfOnuMulticastFastLeaveEnabletrue(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.14 |
hpnicfOnuPortIsolateEnabletrue(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.1.1.15 |
hpnicfOnuLinkTestTableLLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames. SEQUENCE OF HpnicfOnuLinkTestEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2 |
hpnicfOnuLinkTestEntryThe entry of hpnicfOnuLinkTestEntry. HpnicfOnuLinkTestEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1 |
hpnicfOnuLinkTestFrameNumExact number of measurement frames.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.1 |
hpnicfOnuLinkTestFrameSizeMeasurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is disabled. The actual measurement frames sent to the PON are always minimum 60 bytes long. When VLAN tag is enabled, the actual measurement frames size including FCS may reach (1514+4+4=)1522 bytes. 60(60 is VLAN tag disabled) - 1514 .rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.2 |
hpnicfOnuLinkTestDelaytrue:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.3 |
hpnicfOnuLinkTestVlanTagtrue:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.4 |
hpnicfOnuLinkTestVlanPriorityVLAN priority: 0-7.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.5 |
hpnicfOnuLinkTestVlanTagIDVLAN ID: 1-4094.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.6 |
hpnicfOnuLinkTestResultSentFrameNumThe total number of frames sent during the link test process.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.7 |
hpnicfOnuLinkTestResultRetFrameNumThe total number of frames return back during the link test process.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.8 |
hpnicfOnuLinkTestResultRetErrFrameNumThe total number of error frames return back during the link test process.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.9 |
hpnicfOnuLinkTestResultMinDelayThe minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.10 |
hpnicfOnuLinkTestResultMeanDelayThe average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.11 |
hpnicfOnuLinkTestResultMaxDelayThe maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hpnicfOnuLinkTestDelay' is set to be true.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.2.1.12 |
hpnicfOnuBandWidthTableSet bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection. SEQUENCE OF HpnicfOnuBandWidthEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3 |
hpnicfOnuBandWidthEntryThe entry of table hpnicfOnuBandWidthTable. HpnicfOnuBandWidthEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1 |
hpnicfOnuDownStreamBandWidthPolicytrue:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.1 |
hpnicfOnuDownStreamMaxBandWidthMaximum bandwidth allowed for the ONU, measured in Kbits/Sec.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.2 |
hpnicfOnuDownStreamMaxBurstSizeMaximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.3 |
hpnicfOnuDownStreamHighPriorityFirsttrue:Enable high priority frames preference. false:Disable high priority frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.4 |
hpnicfOnuDownStreamShortFrameFirsttrue:Enable short frames preference. false:Disable short frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.5 |
hpnicfOnuP2PBandWidthPolicytrue:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.6 |
hpnicfOnuP2PMaxBandWidthMaximum bandwidth allowed for the ONU, measured in Kbits/Sec.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.7 |
hpnicfOnuP2PMaxBurstSizeMaximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.8 |
hpnicfOnuP2PHighPriorityFirsttrue:Enable high priority frames preference. false:Disable high priority frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.9 |
hpnicfOnuP2PShortFrameFirsttrue:Enable short frames preference. false:Disable short frames preference.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.3.1.10 |
hpnicfOnuSlaManTableTwo types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm. SEQUENCE OF HpnicfOnuSlaManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4 |
hpnicfOnuSlaManEntryThe entry of table hpnicfOnuSlaManTable. HpnicfOnuSlaManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1 |
hpnicfOnuSlaMaxBandWidthMaximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.1 |
hpnicfOnuSlaMinBandWidthMinimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.2 |
hpnicfOnuSlaBandWidthStepValGranularity of bandwidth - measured in Kbit/s. The value of hpnicfOnuSlaMaxBandWidth and hpnicfOnuSlaMinBandWidth should be the multiple of the value of this object.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.3 |
hpnicfOnuSlaDelaylow - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.4 |
hpnicfOnuSlaFixedBandWidthFixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfOnuSlaBandWidthStepVal.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.5 |
hpnicfOnuSlaPriorityClassPrecedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.6 |
hpnicfOnuSlaFixedPacketSizeFixed packet size - measured in byte. The value of this object should be valid when hpnicfOnuSlaFixedBandWidth is configured.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.4.1.7 |
hpnicfOnuInfoTablePrimary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hpnicfOnuHardMajorVersion, hpnicfOnuHardMinorVersion, hpnicfOnuUniMacType) (2)Several physical capabilities of the ONU. (hpnicfOnuLaserOnTime, hpnicfOnuLaserOffTime, hpnicfOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hpnicfOnuWorkMode) SEQUENCE OF HpnicfOnuInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5 |
hpnicfOnuInfoEntryThe entry of the hpnicfOnuInfoTable. HpnicfOnuInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1 |
hpnicfOnuHardMajorVersionONU hardware major version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.1 |
hpnicfOnuHardMinorVersionONU hardware minor version. If the object length is zero, it means the version is unknown.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.2 |
hpnicfOnuSoftwareVersionONU software version.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.3 |
hpnicfOnuUniMacTypeONU User Network Interface(UNI) port MAC type.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.4 |
hpnicfOnuLaserOnTimeThe ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOnTime is unknown.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.5 |
hpnicfOnuLaserOffTimeThe ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hpnicfOnuLaserOffTime is unknown.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.6 |
hpnicfOnuGrantFifoDepMaximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.ro Integer32(1..255|2147483647) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.7 |
hpnicfOnuWorkModeThe operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.8 |
hpnicfOnuPCBVersionONU PCB version.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.9 |
hpnicfOnuRttThe signal round-trip-time(RTT) received.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.10 |
hpnicfOnuEEPROMVersionONU EEPROM version.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.11 |
hpnicfOnuRegTypeONU registered type.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.12 |
hpnicfOnuHostTypeONU host type.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.13 |
hpnicfOnuDistanceThe distance between OLT and ONU, measured in meter.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.14 |
hpnicfOnuLlidThe link layer identifier, which uniquely identifies the ONU of a specific OLT.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.15 |
hpnicfOnuVendorIdONU vendor ID.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.16 |
hpnicfOnuFirmwareVersionONU firmware version.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.17 |
hpnicfOnuOpticalPowerReceivedByOltThe burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.5.1.18 |
hpnicfOnuMacAddrInfoTableThis table used for getting MAC address information of ONU. SEQUENCE OF HpnicfOnuMacAddrInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6 |
hpnicfOnuMacAddrInfoEntryThe entry of the hpnicfEponOnuMacAddrInfoTable. HpnicfOnuMacAddrInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1 |
hpnicfOnuMacIndexThe index of ONUs in one OLT. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.1 |
hpnicfOnuMacAddrFlagThe flag of ONU status. 1 - bound:The ONU is bound but not registered. 2 - registered:The ONU is registered but not bound. 3 - run:The ONU is registered and bound on one OLT. 4 - regIncorrect:The ONU is bound on one OLT and registered on another OLT.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.2 |
hpnicfOnuMacAddressThe MAC address of ONU.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.6.1.3 |
hpnicfOnuBindMacAddrTableThis table implements the following functions for ONUs: Bind MAC of ONU. SEQUENCE OF HpnicfOnuBindMacAddrEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7 |
hpnicfOnuBindMacAddrEntryThe entry of the table hpnicfOnuBindMacAddrTable. HpnicfOnuBindMacAddrEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1 |
hpnicfOnuBindMacAddressBind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.1 |
hpnicfOnuBindTypeSet the binding type with the ONU which is confined to the index of hpnicfEponOnuTypeDescr.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.7.1.2 |
hpnicfOnuFirmwareUpdateTableThis table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware. SEQUENCE OF HpnicfOnuFirmwareUpdateEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8 |
hpnicfOnuFirmwareUpdateEntryThe entry of the table hpnicfOnuFirmwareUpdateTable. HpnicfOnuFirmwareUpdateEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1 |
hpnicfOnuUpdateupdate(1): Update the ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.1 |
hpnicfOnuUpdateResultThe ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.2 |
hpnicfOnuUpdateFileNameThe filename of the ONU firmware to be updated. Note that the filename must contain the file path.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.8.1.3 |
hpnicfOnuLinkTestFrameNumMinValThe lower limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.9 |
hpnicfOnuLinkTestFrameNumMaxValThe upper limit of measurement frames which is confined to hpnicfOnuLinkTestFrameNum.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.10 |
hpnicfOnuSlaMaxBandWidthMinValThe lower limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.11 |
hpnicfOnuSlaMaxBandWidthMaxValThe upper limit of maximum-bandwidth which is confined to hpnicfOnuSlaMaxBandWidth.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.12 |
hpnicfOnuSlaMinBandWidthMinValThe lower limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.13 |
hpnicfOnuSlaMinBandWidthMaxValThe upper limit of minimum-bandwidth which is confined to hpnicfOnuSlaMinBandWidth.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.14 |
hpnicfEponOnuTypeManTableThis table is used for getting ONU bind type in current version. SEQUENCE OF HpnicfEponOnuTypeManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15 |
hpnicfEponOnuTypeManEntryThe entry of the hpnicfEponOnuTypeManTable. HpnicfEponOnuTypeManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1 |
hpnicfEponOnuTypeIndexThe ONU type index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.1 |
hpnicfEponOnuTypeDescrThe ONU type description which can be used to bind ONU in current version. the value of hpnicfOnuBindType can be configured by the index of hpnicfEponOnuTypeDescr.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.15.1.2 |
hpnicfOnuPacketManTableThis table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode. SEQUENCE OF HpnicfOnuPacketManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16 |
hpnicfOnuPacketManEntryThe entry of the hpnicfOnuPacketManTable. HpnicfOnuPacketManEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1 |
hpnicfOnuPriorityTrustThe QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.1 |
hpnicfOnuQueueSchedulerThe packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.16.1.2 |
hpnicfOnuProtocolTableThis table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping. SEQUENCE OF HpnicfOnuProtocolEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17 |
hpnicfOnuProtocolEntryThe entry of hpnicfOnuProtocolTable. HpnicfOnuProtocolEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1 |
hpnicfOnuStpStatustrue(1) - STP status enable on ONU. false(2) - STP status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.1 |
hpnicfOnuIgmpSnoopingStatustrue(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.2 |
hpnicfOnuDhcpsnoopingOption82true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.3 |
hpnicfOnuDhcpsnoopingtrue(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.4 |
hpnicfOnuPppoetrue(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.5 |
hpnicfOnuIgmpSnoopingHostAgingTSet the host aging time of IGMP on ONU.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.6 |
hpnicfOnuIgmpSnoopingMaxRespTSet the max response time of IGMP on ONU.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.7 |
hpnicfOnuIgmpSnoopingRouterAgingTSet the router aging time of IGMP on ONU.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.8 |
hpnicfOnuIgmpSnoopingAggReportStrue(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.9 |
hpnicfOnuIgmpSnoopingAggLeaveStrue(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.17.1.10 |
hpnicfOnuDot1xTableThis table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable. SEQUENCE OF HpnicfOnuDot1xEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18 |
hpnicfOnuDot1xEntryThe entry of the hpnicfOnuDot1xTable. HpnicfOnuDot1xEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1 |
hpnicfOnuDot1xAccountONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hpnicfOnuDot1xPassword.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.1 |
hpnicfOnuDot1xPasswordONU 802.1X password. The object should be set together with hpnicfOnuDot1xAccount.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.18.1.2 |
hpnicfOnuPriorityQueueTableThis table contains specific information of priority queue. SEQUENCE OF HpnicfOnuPriorityQueueEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19 |
hpnicfOnuPriorityQueueEntryThe entry of hpnicfOnuPriorityQueueTable. HpnicfOnuPriorityQueueEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1 |
hpnicfOnuQueueDirectionThe direction of priority queue. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.1 |
hpnicfOnuQueueIdThe queue ID of priority queue. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.2 |
hpnicfOnuQueueSizeThe size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hpnicfOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.19.1.3 |
hpnicfOnuCountTableThis table contains statistics of ONU port. SEQUENCE OF HpnicfOnuCountEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20 |
hpnicfOnuCountEntryThe entry of hpnicfOnuCountTable. HpnicfOnuCountEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1 |
hpnicfOnuInCRCErrPktsThe total number of frames received with bad CRC checksum.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.1 |
hpnicfOnuOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.20.1.2 |
hpnicfEponOnuScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21 |
hpnicfOnuPriorityQueueSizeMinValThe lower limit of queue size which is confined to hpnicfOnuQueueSize.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.1 |
hpnicfOnuPriorityQueueSizeMaxValThe upper limit of queue size which is confined to hpnicfOnuQueueSize.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.2 |
hpnicfOnuPriorityQueueBandwidthMinValThe lower limit of hpnicfOnuQueueMaxBandwidth.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.3 |
hpnicfOnuPriorityQueueBandwidthMaxValThe upper limit of hpnicfOnuQueueMaxBandwidth.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.4 |
hpnicfOnuPriorityQueueBurstsizeMinValThe lower limit of hpnicfOnuQueueMaxBurstsize.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.5 |
hpnicfOnuPriorityQueueBurstsizeMaxValThe upper limit of hpnicfOnuQueueMaxBurstsize.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.6 |
hpnicfOnuUpdateByTypeNextIndexOffer a free index of hpnicfOnuFirmwareUpdateByTypeTable.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.21.7 |
hpnicfOnuQueueBandwidthTableThis table contains specific bandwidth information of ONU priority queue. SEQUENCE OF HpnicfOnuQueueBandwidthEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22 |
hpnicfOnuQueueBandwidthEntryThe entry of hpnicfOnuQueueBandwidthTable. HpnicfOnuQueueBandwidthEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1 |
hpnicfOnuQueueMaxBandwidthThe maximum bandwidth of specific ONU priority queue, measured in 100Kbps.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.1 |
hpnicfOnuQueueMaxBurstsizeThe maximum burst size of specific ONU priority queue, measured in 64Bytes.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.2 |
hpnicfOnuQueuePolicyStatustrue - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.22.1.3 |
hpnicfOnuIpAddressTableONU IP address table. SEQUENCE OF HpnicfOnuIpAddressEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23 |
hpnicfOnuIpAddressEntryThe entry of hpnicfOnuIpAddressTable. HpnicfOnuIpAddressEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1 |
hpnicfOnuIpAddressThe IP address assigned to the ONU.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.1 |
hpnicfOnuIpAddressMaskThe mask of IP address denoted by hpnicfOnuIpAddress.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.2 |
hpnicfOnuIpAddressGatewayThe gateway of IP address denoted by hpnicfOnuIpAddress.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.3 |
hpnicfOnuDhcpallocatetrue(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.4 |
hpnicfOnuManageVIDThe management VLAN of ONU denoted by hpnicfOnuManageVID.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.5 |
hpnicfOnuManageVlanIntfSThe management interface status of ONU denoted by hpnicfOnuManageVlanIntfS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.23.1.6 |
hpnicfOnuChipSetInfoTableONU vendor specific information of ONU. SEQUENCE OF HpnicfOnuChipSetInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24 |
hpnicfOnuChipSetInfoEntryThe entry of hpnicfOnuChipSetInfoTable. HpnicfOnuChipSetInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1 |
hpnicfOnuChipSetVendorIdChipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.1 |
hpnicfOnuChipSetModelChip model, numbering(range from 0 to 0xFF) by the chip vendor.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.2 |
hpnicfOnuChipSetRevisionChip revision.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.3 |
hpnicfOnuChipSetDesignDateChip design date.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.24.1.4 |
hpnicfOnuCapabilityTableCapability of ONU. SEQUENCE OF HpnicfOnuCapabilityEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25 |
hpnicfOnuCapabilityEntryThe entry of the table hpnicfOnuCapabilityTable. HpnicfOnuCapabilityEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1 |
hpnicfOnuServiceSupportedServices types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.ro Bits .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.1 |
hpnicfOnuGEPortNumberThe current gigabit ethernet ports number supported by the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.2 |
hpnicfOnuFEPortNumberthe current fast ethernet ports number supported by the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.3 |
hpnicfOnuPOTSPortNumberThe current POTS ports number supported by the ONUro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.4 |
hpnicfOnuE1PortsNumberThe current E1 ports number supported by the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.5 |
hpnicfOnuUpstreamQueueNumberThe number of upstream queues supported by the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.6 |
hpnicfOnuMaxUpstreamQueuePerPortThe number of maximum upstream queues per port of the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.7 |
hpnicfOnuDownstreamQueueNumberThe number of downstream queues supported by the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.8 |
hpnicfOnuMaxDownstreamQueuePerPortThe number of maximum downstream queues per port of the ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.9 |
hpnicfOnuBatteryBackuptrue(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.10 |
hpnicfOnuIgspFastLeaveSupportedtrue(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.11 |
hpnicfOnuMCtrlFastLeaveSupportedtrue(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.25.1.12 |
hpnicfOnuDbaReportTableThis table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames. SEQUENCE OF HpnicfOnuDbaReportEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26 |
hpnicfOnuDbaReportEntryThe entry of the table hpnicfOnuDbaReportTable. HpnicfOnuDbaReportEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1 |
hpnicfOnuDbaReportQueueIdThe DBA report queue ID. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.1 |
hpnicfOnuDbaReportThresholdThe threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.2 |
hpnicfOnuDbaReportStatusenable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.26.1.3 |
hpnicfOnuCosToLocalPrecedenceTableTable of map of the COS to local-precedence. SEQUENCE OF HpnicfOnuCosToLocalPrecedenceEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27 |
hpnicfOnuCosToLocalPrecedenceEntryConfiguration information of map of the COS to local precedence. HpnicfOnuCosToLocalPrecedenceEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1 |
hpnicfOnuCosToLocalPrecedenceCosIndexIndex of the map, obtains from packet cos value.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.1 |
hpnicfOnuCosToLocalPrecedenceValueValue of local precedence.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.27.1.2 |
hpnicfEponOnuStpPortTableTable of ONU STP ports. SEQUENCE OF HpnicfEponOnuStpPortEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28 |
hpnicfEponOnuStpPortEntryConfiguration information of ONU STP ports. HpnicfEponOnuStpPortEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1 |
hpnicfEponStpPortIndexThe index of the STP ports.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.1 |
hpnicfEponStpPortDescrThe description of the STP ports.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.2 |
hpnicfEponStpPortStateThe current state of the port (i.e. disabled, discarding, learning and forwarding).ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.28.1.3 |
hpnicfOnuPhysicalTableThis table is used for getting ONU physical information. SEQUENCE OF HpnicfOnuPhysicalEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29 |
hpnicfOnuPhysicalEntryThe entry of the hpnicfOnuPhysicalTable. HpnicfOnuPhysicalEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1 |
hpnicfOnuBridgeMacThe bridge MAC address of ONU.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.1 |
hpnicfOnuFirstPonMacThe MAC address of ONU first PON port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.2 |
hpnicfOnuFirstPonRegStateThe register state of ONU first PON port.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.3 |
hpnicfOnuSecondPonMacThe MAC address of ONU second PON port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.4 |
hpnicfOnuSecondPonRegStateThe register state of ONU second PON port.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.29.1.5 |
hpnicfOnuSmlkTableThis table is used for getting ONU SMLK information. SEQUENCE OF HpnicfOnuSmlkEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30 |
hpnicfOnuSmlkEntryThe entry of the hpnicfOnuSmlkTable. HpnicfOnuSmlkEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1 |
hpnicfOnuSmlkGroupIDThe SMLK group ID of ONU.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.1 |
hpnicfOnuSmlkFirstPonRoleThe role of ONU first PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.2 |
hpnicfOnuSmlkFirstPonStatusThe transmitting status of ONU first PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.3 |
hpnicfOnuSmlkSecondPonRoleThe role of ONU second PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.4 |
hpnicfOnuSmlkSecondPonStatusThe transmitting status of ONU second PON port in a SMLK group.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.30.1.5 |
hpnicfOnuRS485PropertiesTableProperty table. SEQUENCE OF HpnicfOnuRS485PropertiesEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31 |
hpnicfOnuRS485PropertiesEntryThe entry of property table. HpnicfOnuRS485PropertiesEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1 |
hpnicfOnuRS485SerialIndexThe index of serial port. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.1 |
hpnicfOnuRS485BaudRateThe port baud rate.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.2 |
hpnicfOnuRS485DataBitsThe port number of data bits in a character.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.3 |
hpnicfOnuRS485ParityThe port sense of a character parity bit.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.4 |
hpnicfOnuRS485StopBitsThe port number of stop bits.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.5 |
hpnicfOnuRS485FlowControlThe port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.6 |
hpnicfOnuRS485TXOctetsThe number of output octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.7 |
hpnicfOnuRS485RXOctetsThe number of input octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.8 |
hpnicfOnuRS485TXErrOctetsThe number of output error octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.9 |
hpnicfOnuRS485RXErrOctetsThe number of input error octets about the port. The unit is byte.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.10 |
hpnicfOnuRS485ResetStatisticsReset the counters to zero, including hpnicfOnuRS485TXOctets, hpnicfOnuRS485RXOctets, hpnicfOnuRS485TXErrOctets and hpnicfOnuRS485RXErrOctets.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.31.1.11 |
hpnicfOnuRS485SessionSummaryTableSession summary table. SEQUENCE OF HpnicfOnuRS485SessionSummaryEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32 |
hpnicfOnuRS485SessionSummaryEntryThe entry of session summary table. HpnicfOnuRS485SessionSummaryEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1 |
hpnicfOnuRS485SessionMaxNumThe max session number of every serial port which can be supported.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.1 |
hpnicfOnuRS485SessionNextIndexThe next valid index used for creating a new session raw. When there is no valid index left, it will return 0.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.32.1.2 |
hpnicfOnuRS485SessionTableRS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets. SEQUENCE OF HpnicfOnuRS485SessionEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33 |
hpnicfOnuRS485SessionEntryThe entry of session table. HpnicfOnuRS485SessionEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1 |
hpnicfOnuRS485SessionIndexRaw session index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.1 |
hpnicfOnuRS485SessionTypeThe type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.2 |
hpnicfOnuRS485SessionAddTypeThis object indicates the transport type of the address contained in hpnicfOnuRS485SessionRemoteIP object.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.3 |
hpnicfOnuRS485SessionRemoteIPThe IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.4 |
hpnicfOnuRS485SessionRemotePortThe port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.5 |
hpnicfOnuRS485SessionLocalPortLocal socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.6 |
hpnicfOnuRS485SessionRowStatusThe status used for creating, modifying, and deleting instances of the columnar objects in raw session table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.33.1.7 |
hpnicfOnuRS485SessionErrInfoTableError information table. When failed to create a session, error information can be got from this table. SEQUENCE OF HpnicfOnuRS485SessionErrInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34 |
hpnicfOnuRS485SessionErrInfoEntryThe entry of error information table. HpnicfOnuRS485SessionErrInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1 |
hpnicfOnuRS485SessionErrInfoError information string. When a response with 'noCreeation' for row creation in table hpnicfOnuRS485SessionTable, the error reason can be got from this object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.5.34.1.1 |
hpnicfEponBatchOperationMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6 |
hpnicfEponBatchOperationBySlotTableThis table is used for batch operation by slot. SEQUENCE OF HpnicfEponBatchOperationBySlotEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1 |
hpnicfEponBatchOperationBySlotEntryThe entry of the hpnicfEponBatchOperationBySlotTable. HpnicfEponBatchOperationBySlotEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1 |
hpnicfEponBatchOperationBySlotIndexThe EPON board index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.1 |
hpnicfEponBatchOperationBySlotTypeThe types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hpnicfEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.2 |
hpnicfEponBatchOperationBySlotExecute batch operation.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.3 |
hpnicfEponBatchOperationBySlotResultThe result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.1.1.4 |
hpnicfEponBatchOperationByOLTTableThis table is used for batch operation by OLT. SEQUENCE OF HpnicfEponBatchOperationByOLTEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2 |
hpnicfEponBatchOperationByOLTEntryThe entry of the hpnicfEponBatchOperationByOLTTable. HpnicfEponBatchOperationByOLTEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1 |
hpnicfEponBatchOperationByOLTTypeThe types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hpnicfEponOnuUpdateFileName with the filename of ONU firmware first.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.1 |
hpnicfEponBatchOperationByOLTExecute batch operation.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.2 |
hpnicfEponBatchOperationByOLTResultThe result of batch operation: 0xFFFF -- other, gernal error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.2.1.3 |
hpnicfOnuFirmwareUpdateByTypeTableThis table is used to update ONU by ONU type. SEQUENCE OF HpnicfOnuFirmwareUpdateByTypeEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3 |
hpnicfOnuFirmwareUpdateByTypeEntryThe entry of the hpnicfOnuFirmwareUpdateByTypeTable. HpnicfOnuFirmwareUpdateByTypeEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1 |
hpnicfOnuUpdateByOnuTypeIndexThe type and file relationship table entry index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.1 |
hpnicfOnuUpdateByTypeOnuTypeThe type of ONUs.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.2 |
hpnicfOnuUpdateByTypeFileNameThe file to be updated for the type of ONUs.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.3 |
hpnicfOnuUpdateByTypeRowStatusThe status of this table entry. Only createAndGo and destroy actions are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.42.1.6.3.1.4 |
hpnicfEponErrorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7 |
hpnicfEponSoftwareErrorCodeOLT software error code.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.1 |
hpnicfOamVendorSpecificAlarmCodeAlarm code of the vendor.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.2 |
hpnicfEponOnuRegErrorMacAddrThe MAC of ONU registered error.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.3 |
hpnicfOamEventLogTypeThe type of event that generated this entry in the event log.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.4 |
hpnicfOamEventLogLocationWhether this event occurred locally, or was received from the OAM peer via Ethernet OAM.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.5 |
hpnicfEponLoopbackPortIndexThe index of port which generate loop back event.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.6 |
hpnicfEponLoopbackPortDescrA textual string containing information about the port generated loop back event.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.7 |
hpnicfOltPortAlarmLlidMisFramesthe amount of mismatched frames about the LLID mismatch alarm.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.8 |
hpnicfOltPortAlarmBererror bit rate.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.9 |
hpnicfOltPortAlarmFererror frames rate.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.10 |
hpnicfEponOnuRegSilentMacThe MAC of silent ONU.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.11 |
hpnicfEponOperationResultThe result of EPON operation.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.12 |
hpnicfEponOnuLaserStateThe state of ONU laser.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.42.1.7.13 |
hpnicfEponTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8 |
hpnicfEponTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0 |
hpnicfEponPortAlarmBerTrapA hpnicfEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.1 |
hpnicfEponPortAlarmFerTrapA hpnicfEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.2 |
hpnicfEponErrorLLIDFrameTrapA hpnicfEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.3 |
hpnicfEponLoopBackEnableTrapA hpnicfEponLoopBackEnableTrap notification is sent when the loop back command is committed. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.4 |
hpnicfEponOnuRegistrationErrTrapA hpnicfEponOnuRegistrationErrTrap notification is sent when a ONU register failed. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.5 |
hpnicfEponOamDisconnectionTrapA hpnicfEponOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.6 |
hpnicfEponEncryptionKeyErrTrapA hpnicfEponEncryptionKeyErrTrap notification is sent when LLID's encryption key is bad. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.7 |
hpnicfEponRemoteStableTrapA hpnicfEponRemoteStableTrap notification is sent when remote Data Terminal Equipment(DTE) has not seen or is unsatisfied with local state information. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.8 |
hpnicfEponLocalStableTrapA hpnicfEponLocalStableTrap notification is sent when DTE has not seen or is unsatisfied with remote state information. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.9 |
hpnicfEponOamVendorSpecificTrapA hpnicfEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.10 |
hpnicfEponSoftwareErrTrapA hpnicfEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.11 |
hpnicfEponPortAlarmBerRecoverTrapA hpnicfEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.12 |
hpnicfEponPortAlarmFerRecoverTrapA hpnicfEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.13 |
hpnicfEponErrorLLIDFrameRecoverTrapA hpnicfEponErrorLLIDFrameRecoverTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.14 |
hpnicfEponLoopBackEnableRecoverTrapA hpnicfEponLoopBackEnableRecoverTrap notification is sent when the loop back is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.15 |
hpnicfEponOnuRegistrationErrRecoverTrapA hpnicfEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.16 |
hpnicfEponOamDisconnectionRecoverTrapA hpnicfEponOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.17 |
hpnicfEponEncryptionKeyErrRecoverTrapA hpnicfEponEncryptionKeyErrRecoverTrap notification is sent when LLID's encryption key is bad and then right. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.18 |
hpnicfEponRemoteStableRecoverTrapA hpnicfEponRemoteStableRecoverTrap notification is sent when remote DTE has not seen or is unsatisfied with local state information and then is realized. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.19 |
hpnicfEponLocalStableRecoverTrapA hpnicfEponLocalStableRecoverTrap notification is sent when DTE has not seen or is unsatisfied with remote state information and then is realized. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.20 |
hpnicfEponOamVendorSpecificRecoverTrapA hpnicfEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.21 |
hpnicfEponSoftwareErrRecoverTrapA hpnicfEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.22 |
hpnicfDot3OamThresholdRecoverEventA hpnicfDot3OamThresholdRecoverEvent notification is sent when hpnicfDot3OamThresholdEvent is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.23 |
hpnicfDot3OamNonThresholdRecoverEventA hpnicfDot3OamNonThresholdRecoverEvent notification is sent when hpnicfDot3OamNonThresholdEvent is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.24 |
hpnicfEponOnuRegExcessTrapA hpnicfEponOnuRegExcessTrap notification is sent when the number of registered ONUs exceeds the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.25 |
hpnicfEponOnuRegExcessRecoverTrapA hpnicfEponOnuRegExcessRecoverTrap notification is sent when hpnicfEponOnuRegExcessTrap is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.26 |
hpnicfEponOnuPowerOffTrapA hpnicfEponOnuPowerOffTrap notification is sent when ONU is power off. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.27 |
hpnicfEponOltSwitchoverTrapA hpnicfEponOltSwithoverTrap notification is sent when OLT switchover is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.28 |
hpnicfEponOltDFETrapA hpnicfEponOltDFETrap notification is sent when there was a serious problem(device fatal error) on OLT. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.29 |
hpnicfEponOltDFERecoverTrapA hpnicfEponOltDFERecoverTrap notification is sent when device fatal error is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.30 |
hpnicfEponOnuSilenceTrapThe hpnicfEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.31 |
hpnicfEponOnuSilenceRecoverTrapThe hpnicfEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.32 |
hpnicfEponOnuUpdateResultTrapA hpnicfEponUpdateResultTrap notification is sent when an ONU reported its firmware update result. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.33 |
hpnicfEponOnuAutoBindTrapA hpnicfEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.34 |
hpnicfEponOnuPortStpStateTrapA hpnicfEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.35 |
hpnicfEponOnuLaserFailedTrapA hpnicfEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life). NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.36 |
hpnicfOnuSmlkSwitchoverTrapA hpnicfOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.42.1.8.0.37 |
hpnicfEponStat OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9 |
hpnicfEponStatTableThis table contains line code error statistics of epon port. SEQUENCE OF HpnicfEponStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1 |
hpnicfEponStatEntryThe entry of hpnicfEponStatTable. HpnicfEponStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1 |
hpnicfEponStatFERThe frame error rate of epon port, measured in 1e-9 unit.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.1 |
hpnicfEponStatBERThe bit error rate of epon port, measured in 1e-9 unit.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.42.1.9.1.1.2 |