HPN-ICF-LswINF-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
137
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
137 total| Object Name |
|---|
hpnicfLswExtInterface OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.1 |
hpnicfifXXTableExtended interface information table. SEQUENCE OF HpnicfIfXXEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1 |
hpnicfifXXEntryEntries of extended interface information table. HpnicfIfXXEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1 |
hpnicfifUnBoundPortWhether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.1 |
hpnicfifISPhyPortWhether it is a physical interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.2 |
hpnicfifAggregatePortWhether it is the aggregated port. (if the port participates in the aggregation, this value is true.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.3 |
hpnicfifMirrorPortWhether it is a mirror port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.4 |
hpnicfifVLANTypeport vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.5 |
hpnicfifMcastControlBroadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.6 |
hpnicfifFlowControlFlow control status.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.7 |
hpnicfifSrcMacControlWhether to filter by source MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.8 |
hpnicfifClearStatClear specify port statistics. Operation read is not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.9 |
hpnicfifXXBasePortIndexIndex number of the port and the first port index of the device is 1.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.10 |
hpnicfifXXDevPortIndexDevice index of the port.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.11 |
hpnicfifPpsMcastControlThe broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.12 |
hpnicfifPpsBcastDisValControlControl the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.13 |
hpnicfifUniSuppressionStepThe step of unicast suppression in ratio mode.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.14 |
hpnicfifPpsUniSuppressionMaxThe max pps(packet per second) value of unicast suppression in pps mode.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.15 |
hpnicfifMulSuppressionStepThe step of multicast suppression in ratio mode.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.16 |
hpnicfifPpsMulSuppressionMaxThe max pps(packet per second) value of multicast suppression in pps mode.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.17 |
hpnicfifUniSuppressionThe unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifUniSuppressionStep.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.18 |
hpnicfifPpsUniSuppressionThe unicast suppression in pps(packet per second) mode. The max value is determined by hpnicfifPpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.19 |
hpnicfifMulSuppressionThe multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hpnicfifMulSuppressionStep.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.20 |
hpnicfifPpsMulSuppressionThe multicast suppression in pps(packet per second) mode. The max pps value is determined by hpnicfifPpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.21 |
hpnicfifComboActivePortActive port on combo interface.rwobsolete Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.22 |
hpnicfifBMbpsMulSuppressionMaxThe maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.23 |
hpnicfifBMbpsMulSuppressionWith bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsMulSuppressionMax in the entry. The default value of hpnicfifBMbpsMulSuppression is the value of hpnicfifBMbpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.24 |
hpnicfifBKbpsMulSuppressionMaxThe maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.25 |
hpnicfifBKbpsMulSuppressionStepThe step of multicast suppression with bandwidth-based(Kbps).ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.26 |
hpnicfifBKbpsMulSuppressionWith bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsMulSuppressionMax in the entry. The value of hpnicfifBKbpsMulSuppression must be multiple of the value of hpnicfifBKbpsMulSuppressionStep. The default value of hpnicfifBKbpsMulSuppression is the value of hpnicfifBKbpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.27 |
hpnicfifUnknownPacketDropMulControl the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions.rw DropDirection .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.28 |
hpnicfifUnknownPacketDropUniControl the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions.rw DropDirection .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.29 |
hpnicfifBMbpsUniSuppressionMaxThe maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.30 |
hpnicfifBMbpsUniSuppressionWith bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hpnicfifBMbpsUniSuppressionMax in the entry. The default value of hpnicfifBMbpsUniSuppression is the value of hpnicfifBMbpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.31 |
hpnicfifBKbpsUniSuppressionMaxThe maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.32 |
hpnicfifBKbpsUniSuppressionStepThe step of unicast suppression with bandwidth-based(Kbps).ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.33 |
hpnicfifBKbpsUniSuppressionWith bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hpnicfifBKbpsUniSuppressionMax in the entry. The value of hpnicfifBKbpsUniSuppression must be multiple of the value of hpnicfifBKbpsUniSuppressionStep. The default value of hpnicfifBKbpsUniSuppression is the value of hpnicfifBKbpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.34 |
hpnicfifOutPayloadOctetsThe actual output octets of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.35 |
hpnicfifInPayloadOctetsThe actual input octets of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.36 |
hpnicfifInErrorPktsRateThe rate of inbound error packets on the interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.37 |
hpnicfifInPktsThe number of packets received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.38 |
hpnicfifInNormalPktsThe number of normal packets received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.39 |
hpnicfifOutPktsThe number of packets sent on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.1.1.40 |
hpnicfifAggregateTablePort aggregation information table. SEQUENCE OF HpnicfIfAggregateEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2 |
hpnicfifAggregateEntryPort aggregation information table. HpnicfIfAggregateEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1 |
hpnicfifAggregatePortIndexIndex number of the main aggregated port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.1 |
hpnicfifAggregatePortNameAggregation group name.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.2 |
hpnicfifAggregatePortListPortsPortlist of a aggregating.rw PortList .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.3 |
hpnicfifAggregateModelLoad sharing mode for the port aggregation.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.4 |
hpnicfifAggregateOperStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.2.1.5 |
hpnicfifHybridPortTableHybrid-port configuration table. SEQUENCE OF HpnicfifHybridPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3 |
hpnicfifHybridPortEntryHybrid-port configuration table. HpnicfifHybridPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1 |
hpnicfifHybridPortIndexIndex number of Hybrid-port.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.1 |
hpnicfifHybridTaggedVlanListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.2 |
hpnicfifHybridTaggedVlanListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.3 |
hpnicfifHybridUnTaggedVlanListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.4 |
hpnicfifHybridUnTaggedVlanListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.1.3.1.5 |
hpnicfifComboPortTableCombo-port table. SEQUENCE OF HpnicfifComboPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.4 |
hpnicfifComboPortEntryThe entry of hpnicfifComboPortTable. HpnicfifComboPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1 |
hpnicfifComboPortIndexThe combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.1 |
hpnicfifComboPortCurActiveCurrent active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.1.4.1.2 |
hpnicfifPktBufTablePacket buffer table. SEQUENCE OF HpnicfifPktBufEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.5 |
hpnicfifPktBufEntryThe entry of hpnicfifPktBufTable. HpnicfifPktBufEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1 |
hpnicfifPktBufFreeThe number of packet buffers available for the interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.1 |
hpnicfifPktBufInitThe number of packet buffers allocated when the interface was created.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.2 |
hpnicfifPktBufMinThe smallest number of packet buffers available for the interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.3 |
hpnicfifPktBufMissThe number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.1.5.1.4 |
hpnicfLswL2InfMib MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.5 |
hpnicfLswL2InfMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1 |
hpnicfSlotPortMaxMax ports of the slots.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.1 |
hpnicfSwitchPortMaxMax ports that this switch includes.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.2 |
hpnicfifVLANTrunkStatusTableGvrp attributes on the VlanTrunk port. SEQUENCE OF HpnicfIfVLANTrunkStatusEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3 |
hpnicfifVLANTrunkStatusEntryGvrp attributes on the VlanTrunk port. HpnicfIfVLANTrunkStatusEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1 |
hpnicfifVLANTrunkIndexIndex number of the VLANTrunk interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.1 |
hpnicfifVLANTrunkGvrpRegistrationGVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.2 |
hpnicfifVLANTrunkPassListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.4 |
hpnicfifVLANTrunkPassListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.5 |
hpnicfifVLANTrunkAllowListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.6 |
hpnicfifVLANTrunkAllowListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.3.1.7 |
hpnicfethernetTableEthernet port attribute table. SEQUENCE OF HpnicfEthernetEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4 |
hpnicfethernetEntryEntries of Ethernet port attribute table HpnicfEthernetEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1 |
hpnicfifEthernetDuplexEthernet interface mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.3 |
hpnicfifEthernetMTUMTU on the Ethernet interface.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.4 |
hpnicfifEthernetSpeedEthernet interface speed.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.5 |
hpnicfifEthernetMdiType of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.7 |
hpnicfMaxMacLearnThe maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.rw INTEGER(-1..2147483647) .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.8 |
hpnicfifMacAddressLearnThis object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.9 |
hpnicfifEthernetTestTest this interface. The actual testing will be different according to products. Read operation not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.10 |
hpnicfifMacAddrLearnModeStatus indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.11 |
hpnicfifEthernetFlowIntervalSet flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.12 |
hpnicfifEthernetIsolateIsolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.13 |
hpnicfifVlanVPNStatusVlan VPN enable status.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.14 |
hpnicfifVlanVPNUplinkStatusVlan VPN uplink status.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.15 |
hpnicfifVlanVPNTPIDPort based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hpnicfVlanVPNTPIDMode to get more information.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.16 |
hpnicfifIsolateGroupIDIsolate group identifier. Value zero means this interface does not belong to any isolate group.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.17 |
hpnicfifisUplinkPortEthernet uplink status, default value is 2.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.18 |
hpnicfifEthernetAutoSpeedMaskThis object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0.ro SpeedModeFlag .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.19 |
hpnicfifEthernetAutoSpeedThis object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hpnicfifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hpnicfifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hpnicfifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hpnicfifEthernetAutoSpeedMask.rw SpeedModeFlag .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.4.1.20 |
hpnicfIsolateGroupMaxMax isolate group that this device support, the value is zero means that the device does not support isolate group.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.5 |
hpnicfGlobalBroadcastMaxPpsThe global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.6 |
hpnicfGlobalBroadcastMaxRatioThe global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.7 |
hpnicfBpduTunnelStatusBpdu tunnel enable status.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.8 |
hpnicfVlanVPNTPIDModeVlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hpnicfifVlanVPNTPID. In this situation, hpnicfVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hpnicfVlanVPNTPID. In this situation, hpnicfifVlanVPNTPID in hpnicfethernetTable has the same value with hpnicfVlanVPNTPID.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.9 |
hpnicfVlanVPNTPIDGlobal Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.10 |
hpnicfPortIsolateGroupTableIsolate Group attribute table. SEQUENCE OF HpnicfPortIsolateGroupEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11 |
hpnicfPortIsolateGroupEntryThe entry of hpnicfPortIsolateGroupTable. HpnicfPortIsolateGroupEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1 |
hpnicfPortIsolateGroupIndexPort isolate group identifier. The index of the hpnicfPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.1 |
hpnicfPortIsolateUplinkIfIndexIndex number of the uplink interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.2 |
hpnicfPortIsolateGroupRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.3 |
hpnicfPortIsolateGroupDescriptionPort isolate group description, default value is zero-length string.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.11.1.4 |
hpnicfMaxMacLearnRangeThe maximum number of MAC address that the port supports.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.12 |
hpnicfifPortProtocolStatTableThis table contains objects of port statistics information based on IPv4 and IPv6 protocols. SEQUENCE OF HpnicfifPortProtocolStatEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13 |
hpnicfifPortProtocolStatEntryThe entry of hpnicfifPortProtocolStatTable. HpnicfifPortProtocolStatEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1 |
hpnicfifIPv4InOctetsNumber of octets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.1 |
hpnicfifIPv4InUcastPktsNumber of unicast packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.2 |
hpnicfifIPv4InMultiPktsNumber of multicast packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.3 |
hpnicfifIPv4InBroadcastPktsNumber of broadcast packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.4 |
hpnicfifIPv4InDiscardsNumber of discard packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.5 |
hpnicfifIPv4InErrorsNumber of error packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.6 |
hpnicfifIPv4OutOctetsNumber of octets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.7 |
hpnicfifIPv4OutUcastPktsNumber of unicast packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.8 |
hpnicfifIPv4OutMultiPktsNumber of multicast packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.9 |
hpnicfifIPv4OutBroadcastPktsNumber of broadcast packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.10 |
hpnicfifIPv4OutDiscardsNumber of discard packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.11 |
hpnicfifIPv4OutErrorsNumber of error packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.12 |
hpnicfifIPv6InOctetsNumber of octets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.13 |
hpnicfifIPv6InUcastPktsNumber of unicast packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.14 |
hpnicfifIPv6InMultiPktsNumber of multicast packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.15 |
hpnicfifIPv6InAnycastPktsNumber of anycast packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.16 |
hpnicfifIPv6InDiscardsNumber of discard packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.17 |
hpnicfifIPv6InErrorsNumber of error packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.18 |
hpnicfifIPv6OutOctetsNumber of octets based on IPv6 transmitted of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.19 |
hpnicfifIPv6OutUcastPktsNumber of unicast packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.20 |
hpnicfifIPv6OutMultiPktsNumber of multicast packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.21 |
hpnicfifIPv6OutAnycastPktsNumber of anycast packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.22 |
hpnicfifIPv6OutDiscardsNumber of discard packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.23 |
hpnicfifIPv6OutErrorsNumber of error packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.8.35.5.1.13.1.24 |