HPN-ICF-NQA-MIB
AI MIB Summary
The HPN-ICF-NQA-MIB extends RFC 2925 compliance to monitor Network Quality Analysis (NQA) test parameters, including probe status, latency, jitter, and packet loss metrics, on HPE/Aruba networking hardware. This private MIB enables granular visibility into active connectivity tests and performance thresholds for service-level verification.
The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.
Main OID:
hpnicfNqa.1.3.6.1.4.1.11.2.14.11.15.8.3
203
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
203 total| Object Name |
|---|
hpnicfNqaThe private MIB file includes the test information of the device. It is supplementary for rfc2925.txt. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.3 |
hpnicfNqaObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.1 |
hpnicfNqaMIBVersionVersion string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.1 |
hpnicfNqaCtlTableDefines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. SEQUENCE OF HpnicfNqaCtlEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2 |
hpnicfNqaCtlEntryDefines an entry in the hpnicfNqaCtlTable. The operation of this table is same as that of pingResultsTable. HpnicfNqaCtlEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1 |
hpnicfNqaCtlTargetPortThe destination port that may be used by udpEcho, tcpConnect and jitter probes.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.1 |
hpnicfNqaCtlSourcePortThe source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.2 |
hpnicfNqaCtlTTLSpecifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.3 |
hpnicfNqaCtlJitterAdminIntervalTime value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.4 |
hpnicfNqaCtlJitterAdminNumPacketsPacket number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.5 |
hpnicfNqaCtlHttpOperationTypeHttp operation type: get, post or raw.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.6 |
hpnicfNqaCtlHttpOperationStringHttp operation string. For example, if the http operation type is get, the string will be url, home page and http version.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.7 |
hpnicfNqaCtlFtpOperationTypeFtp operation type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.8 |
hpnicfNqaCtlFtpUsernameFtp username.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.9 |
hpnicfNqaCtlFtpPasswordFtp password.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.10 |
hpnicfNqaCtlFtpOperationStringFtp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.11 |
hpnicfNqaCtlVPNInstanceVPN name by which system finds route in the specified VPN to send NQA probe packets.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.12 |
hpnicfNqaCtlHistoryKeptTimeTo indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.13 |
hpnicfNqaCtlHistoryEnableTo indicate whether the history should be recorded in the PingProbeHistoryTable or not. enabled(1) --history will be recorded disabled(2) --history will not be recorded.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.14 |
hpnicfNqaCtlICPIFAdvFactorThe advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. This is applicable only for the jitter probe. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------|rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.15 |
hpnicfNqaCtlCodecTypeTo indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.16 |
hpnicfNqaResultsTableDefines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hpnicfNqaResultsTable. The operation of this table is same as that of pingResultsTable. SEQUENCE OF HpnicfNqaResultsEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3 |
hpnicfNqaResultsEntryThe operation of this table is same as that of pingResultsTable. HpnicfNqaResultsEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1 |
hpnicfNqaResultsRttNumDisconnectsThe number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.1 |
hpnicfNqaResultsRttTimeoutsThe number of times that a NQA probe failed because the probe timed out.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.2 |
hpnicfNqaResultsRttBusiesThe number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3 |
hpnicfNqaResultsRttNoConnectionsThe number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.4 |
hpnicfNqaResultsRttDropsThe number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.5 |
hpnicfNqaResultsRttSequenceErrorsThe number of packets arrived out of sequence.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.6 |
hpnicfNqaResultsRttStatsErrorsThe number of some other errors.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.7 |
hpnicfNqaResultsMaxDelaySDThe maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.8 |
hpnicfNqaResultsMaxDelayDSThe maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.9 |
hpnicfNqaResultsLostPacketRatioThe value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.10 |
hpnicfNqaResultsPacketLateArrivalThe value of this object indicates the number of the packets that arrived after the timeout.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.11 |
hpnicfNqaResultsRttSumThe sum of round trip time.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.12 |
hpnicfNqaResultsNumOfDelaySDThe number of delay from source to destination that are successfully measured.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.13 |
hpnicfNqaResultsMinDelaySDThe minimum of all one way times from source to destination.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.14 |
hpnicfNqaResultsSumDelaySDThe sum of one way times from source to destination.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.15 |
hpnicfNqaResultsSum2DelaySDThe sum of squares of one way times from source to destination.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.16 |
hpnicfNqaResultsNumOfDelayDSThe number of delay from destination to source that are successfully measured.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.17 |
hpnicfNqaResultsMinDelayDSThe minimum of all one way times from destination to source.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.18 |
hpnicfNqaResultsSumDelayDSThe sum of one way times from destination to source.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.19 |
hpnicfNqaResultsSum2DelayDSThe sum of squares of one way times from destination to source.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.20 |
hpnicfNqaJitterStatsTableStatistics table for latest jitter activity. SEQUENCE OF HpnicfNqaJitterStatsEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4 |
hpnicfNqaJitterStatsEntryAn entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter. HpnicfNqaJitterStatsEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1 |
hpnicfNqaJitterStatsNumOfRTTThe number of received destination device responses with which jitter test can reach round-trip time.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.1 |
hpnicfNqaJitterStatsMinOfPositivesSDThe value of time that records the minimal positive jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.2 |
hpnicfNqaJitterStatsMaxOfPositivesSDThe value of time that records the maximal positive jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.3 |
hpnicfNqaJitterStatsNumOfPositivesSDThe number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.4 |
hpnicfNqaJitterStatsSumOfPositivesSDThe value of time that records the sum of positive jitter values from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.5 |
hpnicfNqaJitterStatsSum2PositivesSDThe value of time that records the sum of square of positive jitter values from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.6 |
hpnicfNqaJitterStatsMinOfNegativesSDThe value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.7 |
hpnicfNqaJitterStatsMaxOfNegativesSDThe value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.8 |
hpnicfNqaJitterStatsNumOfNegativesSDThe number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.9 |
hpnicfNqaJitterStatsSumOfNegativesSDThe value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.10 |
hpnicfNqaJitterStatsSum2NegativesSDThe value of time that records the sum of square of negative jitter values from source to destination in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.11 |
hpnicfNqaJitterStatsMinOfPositivesDSThe value of time that records the minimal positive jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.12 |
hpnicfNqaJitterStatsMaxOfPositivesDSThe value of time that records the maximal positive jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.13 |
hpnicfNqaJitterStatsNumOfPositivesDSThe number that records positive jitter times from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.14 |
hpnicfNqaJitterStatsSumOfPositivesDSThe value of time that records the sum of positive jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.15 |
hpnicfNqaJitterStatsSum2PositivesDSThe value of time that records the sum of square of positive jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.16 |
hpnicfNqaJitterStatsMinOfNegativesDSThe value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.17 |
hpnicfNqaJitterStatsMaxOfNegativesDSThe value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.18 |
hpnicfNqaJitterStatsNumOfNegativesDSThe number that records negative jitter times from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.19 |
hpnicfNqaJitterStatsSumOfNegativesDSThe value of time that records the sum of negative jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.20 |
hpnicfNqaJitterStatsSum2NegativesDSThe value of time that records the sum of square of negative jitter values from destination to source in the jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.21 |
hpnicfNqaJitterStatsPacketLossSDThe lost packets number sent from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.22 |
hpnicfNqaJitterStatsPacketLossDSThe lost packets number sent from destination to source.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.23 |
hpnicfNqaJitterStatsAvePositivesSDThe value of time that records the average positive jitter value from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.24 |
hpnicfNqaJitterStatsAveNegativesSDThe value of time that records the average negative jitter value from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.25 |
hpnicfNqaJitterStatsAvePositivesDSThe value of time that records the average positive jitter value from destination to source.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.26 |
hpnicfNqaJitterStatsAveNegativesDSThe value of time that records the average negative jitter value from destination to source.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.27 |
hpnicfNqaJitterStatsPktLossUnknownThe number of packets which is lost with unknown reason.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.28 |
hpnicfNqaJitterStatsOperOfICPIFThe ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.29 |
hpnicfNqaJitterStatsOperOfMOSThe MOS (Mean Opinion Score) value for the latest jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.30 |
hpnicfNqaAgentEnableEnable NQA agent function.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.5 |
hpnicfNqaTcpServerTableA table which contains the status of NQA tcp server configuration information. SEQUENCE OF HpnicfNqaTcpServerEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6 |
hpnicfNqaTcpServerEntryA table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port. HpnicfNqaTcpServerEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1 |
hpnicfNqaTcpServerIpAddressTcp server's ip address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.1 |
hpnicfNqaTcpServerPortTcp server's port number. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.2 |
hpnicfNqaTcpServerRowStatushpnicfNqaTcpServerIpAddress and hpnicfNqaTcpServerPort must be set during a creation operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.3 |
hpnicfNqaUdpServerTableStatus of NQA udp server configuration information. SEQUENCE OF HpnicfNqaUdpServerEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7 |
hpnicfNqaUdpServerEntryThis entry includes not only the udp server ip address but also the udp server udp port. HpnicfNqaUdpServerEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1 |
hpnicfNqaUdpServerIpAddressUdp server's ip address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.1 |
hpnicfNqaUdpServerPortUdp server's port number. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.2 |
hpnicfNqaUdpServerRowStatushpnicfNqaUdpServerIpAddress and hpnicfNqaUdpServerPort must be set during a creation operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.3 |
hpnicfNqaServerEnableEnable NQA server function.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.8 |
hpnicfNqaStatsMaxGroupNumberThe maximum number saved per group. The maximum value of hpnicfNqaCtlStatisticsGroupNumber can not exceed the value of this object.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.9 |
hpnicfNqaStatisticsCtlTableDefines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hpnicfNqaStatisticsResultsTable and the hpnicfNqaGroupStatsJitterTable. SEQUENCE OF HpnicfNqaStatisticsCtlEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10 |
hpnicfNqaStatisticsCtlEntryDefines an entry in the hpnicfNqaStatisticsCtlTable. The hpnicfNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsCtlTable to correspond to the pingCtlEntry. HpnicfNqaStatisticsCtlEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1 |
hpnicfNqaCtlStatisticsIntervalStatistic information will be calculated after the time that is the value of hpnicfNqaCtlStatisticsInterval.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.1 |
hpnicfNqaCtlStatisticsGroupNumberThe value of this object indicates the number of group saved. The length of this object is from 1 to hpnicfNqaStatsMaxGroupNumber.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.2 |
hpnicfNqaCtlStatisticsKeptTimeTo indicate how long the statistic information will be saved after the test stops.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.3 |
hpnicfNqaCtlBeginTimeTime at which the type-specified test will start.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.4 |
hpnicfNqaCtlLifeTimeTo indicate how long the type-specified test will last.rw Unsigned32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.5 |
hpnicfNqaStatisticsResultsTableDefines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hpnicfNqaStatisticsResultsTable. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (HpnicfNqaStatisticsResultsEntry) belongs to. SEQUENCE OF HpnicfNqaStatisticsResultsEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11 |
hpnicfNqaStatisticsResultsEntryDefines an entry in the hpnicfNqaStatisticsResultsTable. The hpnicfNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hpnicfNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created. HpnicfNqaStatisticsResultsEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1 |
hpnicfNqaStatResIndexAn entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). Unsigned32(1..'ffffffff'h) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1 |
hpnicfNqaStatResIpTargetAddressTypeThis object indicates the type of address stored in the corresponding hpnicfNqaStatResIpTargetAddress object.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2 |
hpnicfNqaStatResIpTargetAddressThis object represent the host address to be used at a remote host for performing a network analysis operation.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3 |
hpnicfNqaStatResMinRttThe minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4 |
hpnicfNqaStatResMaxRttThe maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5 |
hpnicfNqaStatResAverageRttThe average NQA probe round-trip-time (RTT).ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6 |
hpnicfNqaStatResProbeResponsesThe number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7 |
hpnicfNqaStatResSentProbesThe value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.ro Counter32 UNITS "probes" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8 |
hpnicfNqaStatResRttSumOfSquaresThis object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9 |
hpnicfNqaStatResStartTimeThis object contains the start time of the statistic.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10 |
hpnicfNqaStatResIntervalThis object contains the interval between two times of statistic.ro Gauge32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11 |
hpnicfNqaStatResRttNumDisconnectsThe number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12 |
hpnicfNqaStatResRttTimeoutsThe number of times that a probe failed because the probe timed out.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13 |
hpnicfNqaStatResRttBusiesThe number of times that a NQA probe failed because errors related to sockets.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14 |
hpnicfNqaStatResRttNoConnectionsThe number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15 |
hpnicfNqaStatResRttDropsThe number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16 |
hpnicfNqaStatResRttSequenceErrorsThe number of packets arrived out of sequence.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17 |
hpnicfNqaStatResRttErrorsThe number of other errors.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18 |
hpnicfNqaStatResLostPacketRatioThe value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19 |
hpnicfNqaStatResPacketLateArrivalThe value of this object reflects the number of the packets that arrived after the timeout.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20 |
hpnicfNqaStatResRttSumThis object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21 |
hpnicfNqaStatResNumOfDelaySDThe number of one way times from source to destination that are successfully measured.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22 |
hpnicfNqaStatResMinDelaySDThe minimum one way times from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23 |
hpnicfNqaStatResMaxDelaySDThe maximum one way times from source to destination.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24 |
hpnicfNqaStatResSumDelaySDThe sum of one way times from source to destination.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25 |
hpnicfNqaStatResSum2DelaySDThe sum of squares of one way times from source to destination.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26 |
hpnicfNqaStatResNumOfDelayDSThe number of one way times from destination to source that are successfully measured.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27 |
hpnicfNqaStatResMinDelayDSThe minimum one way times from destination to source.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28 |
hpnicfNqaStatResMaxDelayDSThe maximum one way times from destination to source.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29 |
hpnicfNqaStatResSumDelayDSThe sum of one way times from destination to source.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30 |
hpnicfNqaStatResSum2DelayDSThe sum of squares of one way times from destination to source.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31 |
hpnicfNqaGroupStatsJitterTableTest Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (HpnicfNqaStatisticsResultsEntry) belongs to. SEQUENCE OF HpnicfNqaGroupStatsJitterEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12 |
hpnicfNqaGroupStatsJitterEntryAn entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hpnicfNqajitter. HpnicfNqaGroupStatsJitterEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1 |
hpnicfNqaStatJitterIndexAn entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hpnicfNqaStatJitterIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). Unsigned32(1..'ffffffff'h) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.1 |
hpnicfNqaStatJitterMinOfPosSDThe value of time that records the minimal positive jitter value from source to destination in jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.2 |
hpnicfNqaStatJitterMaxOfPosSDThe value of time that records the maximal positive jitter value from source to destination in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.3 |
hpnicfNqaStatJitterNumOfPosSDThe total number of positive jitters from source to destination in the jitter test.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.4 |
hpnicfNqaStatJitterSumOfPosSDThe value of time that records the sum of positive jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.5 |
hpnicfNqaStatJitterSumOfSquarePosSDThe value of time that records the sum of square of positive jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.6 |
hpnicfNqaStatJitterMinOfNegSDThe value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.7 |
hpnicfNqaStatJitterMaxOfNegSDThe value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.8 |
hpnicfNqaStatJitterNumOfNegSDThe total number of negative jitters from source to destination in the jitter test.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.9 |
hpnicfNqaStatJitterSumOfNegSDThe value of time that records the sum of negative jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.10 |
hpnicfNqaStatJitterSumOfSquareNegSDThe value of time that records the sum of square of negative jitter values from source to destination in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.11 |
hpnicfNqaStatJitterMinOfPosDSThe value of time that records the minimal positive jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.12 |
hpnicfNqaStatJitterMaxOfPosDSThe value of time that records the maximal positive jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.13 |
hpnicfNqaStatJitterNumOfPosDSThe total number of positive jitters from destination to source in the jitter test.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.14 |
hpnicfNqaStatJitterSumOfPosDSThe value of time that records the sum of positive jitter values from destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.15 |
hpnicfNqaStatJitterSumOfSquarePosDSThe value of time that records the sum of square of positive jitter values destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.16 |
hpnicfNqaStatJitterMinOfNegDSThe value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.17 |
hpnicfNqaStatJitterMaxOfNegDSThe value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.18 |
hpnicfNqaStatJitterNumOfNegDSThe total number of negative jitters from destination to source in the jitter test.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.19 |
hpnicfNqaStatJitterSumOfNegDSThe value of time that records the sum of negative jitter values from destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.20 |
hpnicfNqaStatJitterSumOfSquareNegDSThe value of time that records the sum of square of negative jitter values from destination to source in the jitter test.ro Counter32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.21 |
hpnicfNqaStatJitterPacketLossSDThe lost packets number sent from source to destination.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.22 |
hpnicfNqaStatJitterPacketLossDSThe lost packets number sent from destination to source.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.23 |
hpnicfNqaStatJitterAvePosSDThe value of time that records the average positive jitter value from source to destination.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.24 |
hpnicfNqaStatJitterAveNegSDThe value of time that records the average negative jitter value from source to destination.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.25 |
hpnicfNqaStatJitterAvePosDSThe value of time that records the average positive jitter value from destination to source.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.26 |
hpnicfNqaStatJitterAveNegDSThe value of time that records the average negative jitter value from destination to source.ro Gauge32 UNITS "milliseconds" .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.27 |
hpnicfNqaStatJitterPktLossUnknownThe number of packets which is lost with unknown reason.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.28 |
hpnicfNqaStatJitterMaxOfICPIFThe maximum of all ICPIF values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.29 |
hpnicfNqaStatJitterMinOfICPIFThe minimum of all ICPIF values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.30 |
hpnicfNqaStatJitterMaxOfMOSThe maximum of all MOS values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.31 |
hpnicfNqaStatJitterMinOfMOSThe minimum of all MOS values in a statistic cycle for jitter test.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.32 |
hpnicfNqaReactionTableA table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. SEQUENCE OF HpnicfNqaReactionEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13 |
hpnicfNqaReactionEntryDefines an entry in the hpnicfNqaReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third index element selects a single reaction. HpnicfNqaReactionEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1 |
hpnicfNqaReactOwnerIndexThe first index of hpnicfNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an existed test.ro SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.1 |
hpnicfNqaReactTestNameThe second index of hpnicfNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hpnicfNqaReactOwnerIndex and hpnicfNqaReactTestName identify an existed test.ro SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.2 |
hpnicfNqaReactItemIndexThe third index of hpnicfNqaReactionTable, it definitely identifies one of the reaction configurations for a test.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.3 |
hpnicfNqaReactCheckedElementA list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hpnicfNqajitter. 'jitterOwdSD': one way time from source to destination in jitter test. 'jitterOwdDS': one way time from destination to source in jitter test. 'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds', 'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType of the test is hpnicfNqajitter. 'icpif' and 'mos' are valid when pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.4 |
hpnicfNqaReactThresholdUpperLimitThis object defines an administrative upper-threshold value for hpnicfNqaReactCheckedElement. The value of this object is zero if hpnicfNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.5 |
hpnicfNqaReactThresholdLowerLimitThis object defines an administrative lower-threshold value for hpnicfNqaReactCheckedElement. The value of hpnicfNqaReactThresholdLowerLimit should be equal or less than the value of hpnicfNqaReactThresholdUpperLimit. The value of this object is zero if hpnicfNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.6 |
hpnicfNqaReactThresholdTypeThis object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched operation exceeds threshold limit, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. consecutive(2): If reaction threshold type is consecutive and the times of watched operation consecutively exceeds the limit specified by hpnicfNqaReactThresholdConsecNum, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. accumulative(3): If reaction threshold type is accumulative and the times of watched operation accumulatively exceeds the limit specified by hpnicfNqaReactThresholdAccumNum, an action specified in hpnicfNqaReactActionType is generated when hpnicfNqaReactCurrentStatus changes. If reaction threshold type is not configured, the value of this object is 'invalid'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.7 |
hpnicfNqaReactThresholdConsecNumThis object defines a consecutive threshold limit. The value is zero when hpnicfNqaReactThresholdType is not 'consecutive'.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.8 |
hpnicfNqaReactThresholdAccumNumThis object defines an accumulative threshold limit. The value is zero when the hpnicfNqaReactThresholdType is not 'accumulative'.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.9 |
hpnicfNqaReactActionTypeSpecifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap is generated triggerOnly - All trigger actions defined for this entry are generated trapAndTrigger - Both a trap and all trigger actions are generatedrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.10 |
hpnicfNqaReactCurrentStatusSpecifies the current status of this reaction entry: invalid - The status of the reaction entry is unknown. overThreshold - The status of the reaction entry is overThreshold when the monitored result exceeds the threshold value for the hpnicfNqaReactThresholdType. belowThreshold - The status of the reaction entry is belowThreshold when the monitored result is under the threshold value for the hpnicfNqaReactThresholdType.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.11 |
hpnicfNqaReactRowStatusThis object allows entries to be created and deleted in the hpnicfNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.12 |
hpnicfNqaReactCheckedNumThe number of checked element samples that are monitored.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.13 |
hpnicfNqaReactThresholdNumThe number of checked element samples that are over threshold.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.14 |
hpnicfNqaStatisticsReactionTableA table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. SEQUENCE OF HpnicfNqaStatisticsReactionEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14 |
hpnicfNqaStatisticsReactionEntryDefines an entry in the hpnicfNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex belongs to. The third index element identifies an entry in the hpnicfNqaStatisticsResultsTable. The forth index element selects a single reaction. HpnicfNqaStatisticsReactionEntry .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1 |
hpnicfNqaStatReactOwnerIndexThe first index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.1 |
hpnicfNqaStatReactTestNameThe second index of hpnicfNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.2 |
hpnicfNqaStatReactIndexThe third index of hpnicfNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hpnicfNqaStatResIndex values at 1 and wrap after exceeding the maximum possible value as defined by the limit of this object ('ffffffff'h). Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.3 |
hpnicfNqaStatReactItemIndexThe forth index of hpnicfNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.4 |
hpnicfNqaStatReactCheckedNumThe number of checked element samples that are monitored.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.5 |
hpnicfNqaStatReactThresholdNumThe number of checked element samples that are over threshold.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.6 |
hpnicfNqaImplementationTypeDomains OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2 |
hpnicfNqaUdpEchoIndicates that an implementation is using the UDP based echo server. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hpnicfNqaCtlTargetPort must be set to the default value. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.1 |
hpnicfNqaTcpconnectIndicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hpnicfNqaCtlTargetPort and hpnicfNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hpnicfNqaCtlTargetPort must be set to the default value. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.2 |
hpnicfNqajitterIndicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.3 |
hpnicfNqaHttpIndicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.4 |
hpnicfNqadlswIndicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.5 |
hpnicfNqadhcpIndicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.6 |
hpnicfNqaftpIndicates that an implementation is using tcp packet for ftp connect and data transfer. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.2.7 |
hpnicfNqaNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.3.3 |
hpnicfNqaProbeTimeOverThresholdIt is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. Probe time(equals to RTT for some type of tests) is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The probe time is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum. 3. The probe time is consecutively in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdConsecNum. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.1 |
hpnicfNqaJitterRTTOverThresholdIt is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average NQA round-trip-time (RTT) of jitter packets is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. 2. The RTT of jitter packets is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.2 |
hpnicfNqaProbeFailureIt is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the probe test accumulatively failed for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test while the value of hpnicfNqaReactThresholdType is 'accumulative'. 2. When the probe test consecutively failed for a number of times specified in hpnicfNqaReactThresholdConsecNum in one test while the value of hpnicfNqaReactThresholdType is 'consecutive'. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is not hpnicfNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.3 |
hpnicfNqaJitterPacketLossIt is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the jitter packets accumulatively lost for a number of times specified in hpnicfNqaReactThresholdAccumNum in one test while the value of hpnicfNqaReactThresholdType is 'accumulative'. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.4 |
hpnicfNqaJitterSDOverThresholdThe SD means the jitter values from source to destination. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of SD in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit and the hpnicfNqaReactThresholdType is specified as 'average' type. 2. The average of SD in one jitter test is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum and the hpnicfNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.5 |
hpnicfNqaJitterDSOverThresholdThe DS means the jitter values from destination to source. It is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. The average of DS in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit and the hpnicfNqaReactThresholdType is specified as 'average' type. 2. The average of DS in one jitter test is accumulatively not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit for a number of times specified in hpnicfNqaReactThresholdAccumNum and the hpnicfNqaReactThresholdType is specified as 'accumulative' type. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test is hpnicfNqajitter. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.6 |
hpnicfNqaICPIFOverThresholdIt is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the ICPIF value in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.7 |
hpnicfNqaMOSOverThresholdIt is generated when the value of hpnicfNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The over threshold situations is specified as below. 1. When the MOS value in one jitter test is not in the range hpnicfNqaReactThresholdLowerLimit through hpnicfNqaReactThresholdUpperLimit. This notification is valid only when hpnicfNqaReactActionType is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test is hpnicfNqajitter and hpnicfNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw' or 'g729A'. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.3.3.8 |