HPN-ICF-LswMSTP-MIB
AI MIB Summary
The HPN-ICF-LswMSTP-MIB enables monitoring and configuration of Multiple Spanning Tree Protocol (MSTP) instances, VLAN-to-instance mappings, and MSTP region parameters on HPE/Aruba network switches. It provides access to critical topology metrics including MSTP bridge priority, root bridge identifiers, port states, and synchronization status for Layer 2 loop prevention.
This MIB defines objects for managing MSTP.
Main OID:
hpnicfdot1sMstp.1.3.6.1.4.1.11.2.14.11.15.8.35.14
83
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
hpnicfdot1sMstpThis MIB defines objects for managing MSTP. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.14 |
hpnicfMstpEventsV2Definition point for Mstp notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0 |
hpnicfPortMstiStateForwardingThe SNMP trap that is generated when a port turns into forwarding state form other state. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.1 |
hpnicfPortMstiStateDiscardingThe SNMP trap that is generated when a port turns into discarding state form forwarding state. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.2 |
hpnicfBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.3 |
hpnicfPortMstiRootGuardedThe SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.4 |
hpnicfPortMstiBpduGuardedThe SNMP trap is generated when an edged port of the BPDU-guard device receives a BPDU. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.5 |
hpnicfPortMstiLoopGuardedThe SNMP trap that is generated when an Alternate-Port or Root-Port is aged out. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.6 |
hpnicfMstiNewRootThe SNMP trap is generated when the sending device becomes the new root of the spanning tree. The first root bridge ID means the old root bridge ID, and the second one means the new root bridge ID. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.7 |
hpnicfPortPvstBpduProtectionThe SNMP trap is generated when a PVST BPDU is received on an MSTP port that is enabled with the PVST protection feature. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.0.8 |
hpnicfdot1sStpStatusWhether the Bridge MSTP is enabled.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.1 |
hpnicfdot1sStpForceVersionThe mode of this Bridge spanning-tree protocol.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.2 |
hpnicfdot1sStpDiameterThe diameter of Bridge.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.3 |
hpnicfdot1sMstBridgeMaxHopsThe maximum value of the Bridge hops.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.4 |
hpnicfdot1sMstMasterBridgeIDThe Bridge Identifier of the current Master Bridge.ro BridgeId .1.3.6.1.4.1.11.2.14.11.15.8.35.14.5 |
hpnicfdot1sMstMasterPathCostThe CIST path cost from the transmitting Bridge to the Master Bridge.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.6 |
hpnicfdot1sMstBpduGuardWhether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.7 |
hpnicfdot1sMstAdminFormatSelectorThe administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.8 |
hpnicfdot1sMstAdminRegionNameThis MSTP administrative region name.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.9 |
hpnicfdot1sMstAdminRevisionLevelThis MSTP administrative revision level.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.10 |
hpnicfdot1sMstOperFormatSelectorThe operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.11 |
hpnicfdot1sMstOperRegionNameThis MSTP operative region name.ro OCTET STRING( SIZE .1.3.6.1.4.1.11.2.14.11.15.8.35.14.12 |
hpnicfdot1sMstOperRevisionLevelThis MSTP operative revision level.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.13 |
hpnicfdot1sMstOperConfigDigestThis MSTP Region's Configuration Digest Signature Key.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.14 |
hpnicfdot1sMstRegionConfActiveActive the region configuration.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.15 |
hpnicfdot1sMstDefaultVlanAlloSet default configuration about VLAN allocation and all VLANs are mapped to CIST.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.16 |
hpnicfdot1sMstDefaultRegionNameSet default region name.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.17 |
hpnicfdot1sVIDAllocationTableMSTP VLAN-to-instance mapping table. SEQUENCE OF Hpnicfdot1sVIDAllocationEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.14.18 |
hpnicfdot1sVIDAllocationEntryMSTP VLAN-to-instance mapping table entry. Hpnicfdot1sVIDAllocationEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1 |
hpnicfdot1sMstVIDVLAN Identifierro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.1 |
hpnicfdot1sAdminMstIDAdministrative Multiple spanning-tree instance Identifier.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.2 |
hpnicfdot1sOperMstIDOperative Multiple spanning-tree instance Identifier.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.18.1.3 |
hpnicfdot1sInstanceTableMSTI table. SEQUENCE OF Hpnicfdot1sInstanceEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19 |
hpnicfdot1sInstanceEntryMSTI table entry. Hpnicfdot1sInstanceEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1 |
hpnicfdot1sInstanceIDMultiple spanning-tree instance Identifierro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.1 |
hpnicfdot1sMstiBridgeIDThe Bridge Identifier for the spanning tree instance identified by MSTIDro BridgeId .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.2 |
hpnicfdot1sMstiBridgePriorityThe Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.3 |
hpnicfdot1sMstiDesignedRootThe Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTIDro BridgeId .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.4 |
hpnicfdot1sMstiRootPathCostThe path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTIDro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.5 |
hpnicfdot1sMstiRootPortThe Root Port for the spanning tree instance identified by the MSTIDro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.6 |
hpnicfdot1sMstiRootTypeConfig this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTIDrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.7 |
hpnicfdot1sMstiRemainingHopsThe remaining hops of the spanning tree instance identified by MSTIDro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.8 |
hpnicfdot1sMstiAdminMappedVlanListLowThe lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.9 |
hpnicfdot1sMstiAdminMappedVlanListHighThe higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.10 |
hpnicfdot1sMstiOperMappedVlanListLowThe lower part of operative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.11 |
hpnicfdot1sMstiOperMappedVlanListHighThe higher part of operative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.19.1.12 |
hpnicfdot1sPortTableMSTP interface table. SEQUENCE OF Hpnicfdot1sPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20 |
hpnicfdot1sPortEntryMSTP interface table entry. Hpnicfdot1sPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1 |
hpnicfdot1sMstiPortIndexThe index of the Bridge Portro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.1 |
hpnicfdot1sMstiStateThe current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding)ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.2 |
hpnicfdot1sMstiPortPriorityThe value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.3 |
hpnicfdot1sMstiPathCostThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.4 |
hpnicfdot1sMstiDesignatedRootThe Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTIDro BridgeId .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.5 |
hpnicfdot1sMstiDesignatedCostThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.6 |
hpnicfdot1sMstiDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.ro BridgeId .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.7 |
hpnicfdot1sMstiDesignatedPortThe Port Identifier of the port on the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.8 |
hpnicfdot1sMstiMasterBridgeIDThe Bridge Identifier of the current Master Bridge. Effective in CIST.ro BridgeId .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.9 |
hpnicfdot1sMstiMasterPortCostThe CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.10 |
hpnicfdot1sMstiStpPortEdgeportWhether the port fast is enabled. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.11 |
hpnicfdot1sMstiStpPortPointToPointWhether the port connects the point to point link. Effective in CIST.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.12 |
hpnicfdot1sMstiStpMcheckForcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.13 |
hpnicfdot1sMstiStpTransLimitThe value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.14 |
hpnicfdot1sMstiStpRXStpBPDUThe number of received Config BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.15 |
hpnicfdot1sMstiStpTXStpBPDUThe number of transmitted Config BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.16 |
hpnicfdot1sMstiStpRXTCNBPDUThe number of received TCN BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.17 |
hpnicfdot1sMstiStpTXTCNBPDUThe number of transmitted TCN BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.18 |
hpnicfdot1sMstiStpRXRSTPBPDUThe number of received RST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.19 |
hpnicfdot1sMstiStpTXRSTPBPDUThe number of transmitted RST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.20 |
hpnicfdot1sMstiStpRXMSTPBPDUThe number of received MST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.21 |
hpnicfdot1sMstiStpTXMSTPBPDUThe number of transmitted MST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.22 |
hpnicfdot1sMstiStpClearStatisticsClear the spanning tree statistic. Effective in CIST.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.23 |
hpnicfdot1sMstiStpDefaultPortCostSet default Port path cost.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.24 |
hpnicfdot1sMstiStpStatusWhether the spanning tree protocol is enabled on this port. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.25 |
hpnicfdot1sMstiPortRootGuardWhether the root guard is enabled. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.26 |
hpnicfdot1sMstiPortLoopGuardWhether the loop protection is enabled. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.27 |
hpnicfdot1sMstiStpPortSendingBPDUTypeType of BPDU which the port is sending.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.28 |
hpnicfdot1sMstiStpOperPortPointToPointThis object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hpnicfdot1sMstiStpPortPointToPoint. If the value of hpnicfdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hpnicfdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.29 |
hpnicfdot1sMstiStpPortAdminBPDUFmtThe value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format is forced to IEEE 802.1s. Value auto means that the format of MST BPDU sending on the port is determined by the MST BPDU that the port has received. Effective in CIST.rw Hpnicfdot1sFormatStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.30 |
hpnicfdot1sMstiStpPortOperBPDUFmtThe format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the format of MST BPDU sending on the port is IEEE 802.1s. Effective in CIST.ro Hpnicfdot1sFormatStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.31 |
hpnicfdot1sMstiStpPortRoleRestrictionWhether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.32 |
hpnicfdot1sMstiStpPortTcRestrictionWhether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.33 |
hpnicfdot1sMstiStpPortDisputedWhether the port is disputed for the CIST or MSTI.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.14.20.1.34 |
hpnicfdot1sStpPathCostStandardPath cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.14.21 |