HPN-ICF-LswVLAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HPN-ICF-LswVLAN-MIB.
Main OID:
hpnicfLswVlan.1.3.6.1.4.1.11.2.14.11.15.8.35.2
77
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
hpnicfLswVlan MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.2 |
hpnicfLswVlanMngObjectDescription. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1 |
hpnicfdot1qVlanMIBTableVLAN MIB table SEQUENCE OF HpnicfDot1qVlanMIBEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1 |
hpnicfdot1qVlanMIBEntryEntries of VLAN MIB table HpnicfDot1qVlanMIBEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1 |
hpnicfdot1qVlanIndexThe VLAN-ID.ro HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.1 |
hpnicfdot1qVlanNameName of the VLAN.rw SnmpAdminString .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.2 |
hpnicfdot1qVlanPortsPort list of the VLAN.rw PortList (HPN-ICF-LswINF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.3 |
hpnicfdot1qVlanTypeVlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3).rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.4 |
hpnicfdot1qVlanMacFilterWhether to filter MAC addresses.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.5 |
hpnicfdot1qVlanMcastUnknownProtosWhether to broadcast the unknown packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.6 |
hpnicfExistInterfaceWhether there is virtual interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.7 |
hpnicfVlanInterfaceIndexWhether vlan interface is configured on vlan. If vlan interface is
configured, the value of the node is vlan id, else the value is 0.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.8 |
hpnicfdot1qVlanMacLearnMAC address learning identity. (common vlan/Sub-vlan)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.9 |
hpnicfdot1qVlanStatusStatus of the VLAN.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.10 |
hpnicfdot1qVlanCreationTimeThe sysUPTime when the VLAN is created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.11 |
hpnicfdot1qVlanPriorityPriority of the VLAN.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.12 |
hpnicfdot1qVlanRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.13 |
hpnicfdot1qVlanBroadcastSuppressionWhether broadcast suppression of vlan be supported pro rata.
The vlaue of 100 indicates no broadcast suppression. If the
function is not supported, this object cannot be written,
and 100 will be returned when readingrw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.14 |
hpnicfdot1qVlanBcastSuppressionPPSIf the broadcast can be controlled with pps(packet per second)type,
the value of 0 indicates no suppression. This node is conflicted
with hpnicfdot1qVlanBroadcastSuppression. If the mode is set,
hpnicfdot1qVlanBroadcastSuppression is unavailable. And vice versa.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.15 |
hpnicfdot1qVlanMulticastMulticast vlan. The default value is disable(0).rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.16 |
hpnicfdot1qVlanTaggedPortsTagged port list of the VLAN.ro PortList (HPN-ICF-LswINF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.17 |
hpnicfdot1qVlanUntaggedPortsUntagged port list of the VLAN.ro PortList (HPN-ICF-LswINF-MIB) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.18 |
hpnicfdot1qVlanPortIndexsPortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.1.1.19 |
hpnicfVlanInterfaceTableVirtual interface configuration table SEQUENCE OF HpnicfVlanInterfaceEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2 |
hpnicfVlanInterfaceEntryEntries of virtual interface configuration table HpnicfVlanInterfaceEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1 |
hpnicfVlanInterfaceIDIndex of the vlan interface table.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.1 |
hpnicfdot1qVlanIDVLAN-IDro HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.2 |
hpnicfdot1qVlanIpAddressIP address of interface.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.3 |
hpnicfdot1qVlanIpAddressMaskIP address mask of interface.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.4 |
hpnicfVlanInterfaceAdminStatusStatus of VLAN virtual interfaces.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.5 |
hpnicfVlanInterfaceFrameTypeFrame type accepted by VLAN virtual interfaces.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.6 |
hpnicfInterfaceRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.7 |
hpnicfVlanInterfaceIpMethodVlan interface ip address acquiring method which is manual, dhcp or bootp.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.8 |
hpnicfVlanInterfaceIfIndexIfIndex of VLAN interface.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.2.1.9 |
hpnicfifIsolateMappingTableSecondary vlan lists of Isolate-VLANs. SEQUENCE OF HpnicfifIsolateMappingEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4 |
hpnicfifIsolateMappingEntrySecondary vlan lists of Isolate-VLANs. HpnicfifIsolateMappingEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1 |
hpnicfifIsolatePrimaryVlanIDPrimary VLAN-ID.ro HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.1 |
hpnicfifIsolateSecondaryVlanlistLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.2 |
hpnicfifIsolateSecondaryVlanlistHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.4.1.3 |
hpnicfVlanInterfaceAddrTableVLAN interface IP address configuration table SEQUENCE OF HpnicfVlanInterfaceAddrEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5 |
hpnicfVlanInterfaceAddrEntryEntries of VLAN interface IP address configuration table HpnicfVlanInterfaceAddrEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1 |
hpnicfVlanInterfaceIpIfIndexIndex of VLAN interfaces.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.1 |
hpnicfVlanInterfaceIpAddrIP address of VLAN interface.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.2 |
hpnicfVlanInterfaceIpMaskIP address mask of VLAN interface. When destory single IP address,
you must set it correct to relative IP address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.3 |
hpnicfVlanInterfaceIpTypeIP address type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.4 |
hpnicfVlanInterfaceIpRowStatusOperation status. active(1) will only be set when taking GET or
GET NEXT operation. createAndGo(4) and destory(6) is valid when
taking SET operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.5.1.5 |
hpnicfDot1qVlanBatchMIBTableVLAN batch configuration table.
In the case of VLAN batch creation, hpnicfdot1qVlanBatchSetOperate should
be set to 1.
For example, if creating a row is for creating VLANs 2 to 4, the value
of the objects should be set as follows:
hpnicfdot1qVlanBatchStartIndex 2,
hpnicfdot1qVlanBatchEndIndex 4,
hpnicfdot1qVlanBatchSetOperate create(1),
hpnicfdot1qVlanBatchRowStatus createAndGo(4).
In the case of VLAN batch deletion, hpnicfdot1qVlanBatchSetOperate should
be set to 2.
For example, if creating a row is for deleting VLANs 10 to 20, the value
of the objects should be set as follows:
hpnicfdot1qVlanBatchStartIndex 10,
hpnicfdot1qVlanBatchEndIndex 20,
hpnicfdot1qVlanBatchSetOperate delete(2),
hpnicfdot1qVlanBatchRowStatus createAndGo(4).
When the action of batch VLANs deleting or creating is done, one row
will be existent until it is deleted manually or ages out, but the VLANs
of it won't disappear with the deletion of the row. SEQUENCE OF HpnicfDot1qVlanBatchMIBEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6 |
hpnicfDot1qVlanBatchMIBEntryVLAN batch configuration entry. HpnicfDot1qVlanBatchMIBEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1 |
hpnicfdot1qVlanBatchOperIndexThe consequence of operation.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.1 |
hpnicfdot1qVlanBatchStartIndexThe value of start VLAN-ID.rw HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.2 |
hpnicfdot1qVlanBatchEndIndexThe value of end VLAN-ID.rw HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.3 |
hpnicfdot1qVlanBatchOperStatusThe status of operation.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.4 |
hpnicfdot1qVlanBatchRowStatusThe row status of HpnicfDot1qVlanBatchMIBEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.5 |
hpnicfdot1qVlanBatchSetOperateVLAN batch creation or deletion.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.6.1.6 |
hpnicfifSuperVlanMappingTableSub VLAN lists of super-VLANs. SEQUENCE OF HpnicfifSuperVlanMappingEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7 |
hpnicfifSuperVlanMappingEntrySub VLAN lists of super-VLANs. HpnicfifSuperVlanMappingEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1 |
hpnicfifSuperVlanIDSuper VLAN ID.ro HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.1 |
hpnicfifSubVlanlistLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each sub
VLAN of the super VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is a sub VLAN of the super VLAN; the
VLAN is not a sub VLAN of the super VLAN if its bit has
a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.2 |
hpnicfifSubVlanlistHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each sub
VLAN of the super VLAN is represented by a single bit
within the value of this object. If that bit has a value of
'1' then that VLAN is a sub VLAN of the super VLAN; the
VLAN is not a sub VLAN of the super VLAN if its bit has
a value of '0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.7.1.3 |
hpnicfPrivateVlanMappingTableSecondary vlan lists of Primary-VLANs. SEQUENCE OF HpnicfPrivateVlanMappingEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8 |
hpnicfPrivateVlanMappingEntrySecondary vlan lists of Primary-VLANs. HpnicfPrivateVlanMappingEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1 |
hpnicfPrimaryVlanIDPrimary VLAN-ID.ro HpnicfVlanIndex .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.1 |
hpnicfSecondaryVlanlistLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.2 |
hpnicfSecondaryVlanlistHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.35.2.1.8.1.3 |
hpnicfLswVlanProtoObjectDescription. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2 |
hpnicfVLANMibGarpLeaveAllTimeThe GARP LeaveAll time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.14 |
hpnicfvLANMibSwitchCountTableA table containing the information various statistics of switch. SEQUENCE OF HpnicfVLANMibSwitchCountEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15 |
hpnicfvLANMibSwitchCountEntryA table containing the information various statistics of switch. HpnicfVLANMibSwitchCountEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1 |
hpnicfVLANMibSwitchGMRPRXPktNumber of GMRP frames received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.1 |
hpnicfVLANMibSwitchGVRPRXPktNumber of GVRP frames received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.2 |
hpnicfVLANMibSwitchGMRPTXPktNumber of GMRP frames transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.3 |
hpnicfVLANMibSwitchGVRPTXPktNumber of GVRP frames transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.4 |
hpnicfVLANMibSwitchDiscardedPktNumber of discarded frames.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.5 |
hpnicfVLANMibSwitchGarpStatClearClear various Statistics viz. read operation not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.15.1.6 |
hpnicfvLANMibHoldTimeTableA table for setting/getting the Hold Time for a particular port. SEQUENCE OF HpnicfVLANMibHoldTimeEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16 |
hpnicfvLANMibHoldTimeEntryA table for setting/getting the HoldTime of the port. HpnicfVLANMibHoldTimeEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1 |
hpnicfVLANMibHoldTimeHoldTime of the port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.2.2.16.1.1 |