HPN-ICF-MPLS-LDP-MIB
AI MIB Summary
The HPN-ICF-MPLS-LDP-MIB module enables monitoring and management of Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) sessions, peer adjacencies, and associated traffic statistics on Hewlett Packard Enterprise (HPE) networking hardware. It provides access to critical operational metrics including LDP neighbor states, label bindings, and interface-specific LDP counters for troubleshooting MPLS label-switched path (LSP) connectivity.
All rights reserved
Main OID:
hpnicfMplsLdp.1.3.6.1.4.1.11.2.14.11.15.8.12.2
134
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
134 total| Object Name |
|---|
hpnicfMplsLdpAll rights reserved MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.12.2 |
hpnicfMplsLdpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1 |
hpnicfMplsLdpLsrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1 |
hpnicfMplsLdpLsrIncarnTableMPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard <IETF DRAFT> MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation. SEQUENCE OF HpnicfMplsLdpLsrIncarnEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1 |
hpnicfMplsLdpLsrIncarnEntryAn entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier. HpnicfMplsLdpLsrIncarnEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1 |
hpnicfMplsLdpLsrIDThe LSR's Identifier.rw MplsLsrIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.1 |
hpnicfMplsLdpLsrLoopDetectionPresentA indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.2 |
hpnicfMplsLdpLsrLoopDetectionAdminStatusTo enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3 |
hpnicfMplsLdpLsrPathVectorLimitThis object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.4 |
hpnicfMplsLdpLsrHopCountLimitThis object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.5 |
hpnicfMplsLdpLsrLoopPreventionPresentA indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of MPLS does not provide support to assign this MIB object with a value 'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.6 |
hpnicfMplsLdpLsrLoopPreventionAdminStatusTo enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to assign this MIB object with a value 'enabled'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.7 |
hpnicfMplsLdpLsrLabelRetentionModeThe LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of MPLS does not provide support to assign this MIB object with a value 'liberal'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.8 |
hpnicfMplsLdpLsrIncarnIDThe incarnation acts as index to all the elements in this table.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.9 |
hpnicfMplsLdpLsrMaxLdpEntitiesThe maximum number of LDP entities that can be supported by this Incarnation.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.10 |
hpnicfMplsLdpLsrMaxLocalPeersThe maximum number of Local LDP peers that can be supported by this Incarnation.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.11 |
hpnicfMplsLdpLsrMaxRemotePeersThe maximum number of Remote LDP peers that can be supported by this Incarnation.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.12 |
hpnicfMplsLdpLsrMaxIfacesThe maximum number of Label enabled Interfaces that can be supported by this Incarnation.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.13 |
hpnicfMplsLdpLsrMaxLspsThe maximum number of Label Switched Paths that can be supported by this Incarnation.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.14 |
hpnicfMplsLdpLsrMaxCrlspTnlsThe maximum number of CRLSPs that can be supported by this Incarnation.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.15 |
hpnicfMplsLdpLsrMaxErhopPerCrlspTnlThe maximum number of ER-Hops that can be supported in a CRLSP tunnel.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.16 |
hpnicfMplsLdpLsrRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.17 |
hpnicfMplsLdpLsrMaxVcmCapabilityrw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.18 |
hpnicfMplsLdpLsrVcmPathVecInAllLblMapPresentrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.19 |
hpnicfMplsLdpLsrRequestRetrytimerValuerw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.20 |
hpnicfMplsLdpLsrNumOfRequestRetryAttemptsrw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.21 |
hpnicfMplsLdpEntityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2 |
hpnicfMplsLdpEntityTableThis table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR). SEQUENCE OF HpnicfMplsLdpEntityEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1 |
hpnicfMplsLdpEntityEntryAn entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier. HpnicfMplsLdpEntityEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1 |
hpnicfMplsLdpEntityIDThe LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR.ro MplsLdpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.1 |
hpnicfMplsLdpEntityLabelSpaceTypeThe type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.2 |
hpnicfMplsLdpEntityDefVpiThe Default VPI value used in the label for the default VPI.rw AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.3 |
hpnicfMplsLdpEntityDefVciThe Default VCI value used in the label for the default VCI.rw AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.4 |
hpnicfMplsLdpEntityUnlabTrafVpiVPI value of the VCC supporting unlabeled traffic.rw AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.5 |
hpnicfMplsLdpEntityUnlabTrafVciVCI value of the VCC supporting unlabeled traffic.rw AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.6 |
hpnicfMplsLdpEntityMergeCapabilitySets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.7 |
hpnicfMplsLdpEntityVcDirectionalitySets the VC directionality for this LDP entity.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.8 |
hpnicfMplsLdpEntityWellKnownDiscoveryPortThe well known LDP Discovery Port.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.9 |
hpnicfMplsLdpEntityMtuThe maximum transmission unit (MTU) that was configured for this entity.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.10 |
hpnicfMplsLdpEntityKeepAliveHoldTimerThe two octet value which is the proposed keep alive hold timer for this LDP Entity.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.11 |
hpnicfMplsLdpEntityFailedInitSessionThresholdWhen attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero).rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.12 |
hpnicfMplsLdpEntityLabelDistributionMethodFor any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.13 |
hpnicfMplsLdpEntityLabelAllocationMethodFor any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.14 |
hpnicfMplsLdpEntityHelloHoldTimerThe two octet value which is the proposed hello hold timer for this LDP Entity.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.15 |
hpnicfMplsLdpEntityRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.16 |
hpnicfMplsLdpEntityIfTableThis table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity. SEQUENCE OF HpnicfMplsLdpEntityIfEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2 |
hpnicfMplsLdpEntityIfEntryAn entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady. HpnicfMplsLdpEntityIfEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1 |
hpnicfMplsLdpEntityIfIndexIdentifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.1 |
hpnicfMplsLdpEntityIfIpv4AddressThe IPv4 address associated with the interface.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.2 |
hpnicfMplsLdpEntityIfRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.3 |
hpnicfMplsLdpEntityConfAtmLabelRangeTableThe MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table. SEQUENCE OF HpnicfMplsLdpEntityConfAtmLabelRangeEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3 |
hpnicfMplsLdpEntityConfAtmLabelRangeEntryA row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table. HpnicfMplsLdpEntityConfAtmLabelRangeEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1 |
hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVPIThe minimum VPI number configured for this range. AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.1 |
hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVCIThe minimum VCI number configured for this range. AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.2 |
hpnicfMplsLdpEntityConfAtmLabelRangeUpperBoundVPIThe maximum VPI number configured for this range.rw AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.3 |
hpnicfMplsLdpEntityConfAtmLabelRangeUpperBoundVCIThe maximum VCI number configured for this range.rw AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.4 |
hpnicfMplsLdpEntityConfAtmLabelRangeRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.5 |
hpnicfMplsLdpEntityStatsTableThis table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR. SEQUENCE OF HpnicfMplsLdpEntityStatsEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4 |
hpnicfMplsLdpEntityStatsEntryA row in this table contains statistical information about an LDP Entity. HpnicfMplsLdpEntityStatsEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4.1 |
hpnicfMplsLdpAttemptedSessionsA count of the total attempted sessions for this LDP Entity.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4.1.1 |
hpnicfMplsLdpPeerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3 |
hpnicfMplsLdpPeerTableInformation about LDP peers which have been discovered by the LDP Entities that are managed by this agent. SEQUENCE OF HpnicfMplsLdpPeerEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1 |
hpnicfMplsLdpPeerEntryInformation about a single Peer. HpnicfMplsLdpPeerEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1 |
hpnicfMplsLdpPeerIndexAn identifier for the LDP peer that is unique within the scope of this agent. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.1 |
hpnicfMplsLdpPeerIDThe LDP identifier of this LDP Peer.rw MplsLdpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.2 |
hpnicfMplsLdpPeerInternetworkAddrTypeThe type of the internetwork layer address of this LDP peer. This object indicates how the value of hpnicfMplsLdpPeerInternetworkAddr is to be interpreted.rw AddressFamilyNumbers .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.3 |
hpnicfMplsLdpPeerInternetworkAddrThe value of the internetwork layer address of this LDP peer.rw MplsLdpGenAddr .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.4 |
hpnicfMplsLdpPeerDefaultMtuThe default maximum transmission unit (MTU) of the LDP Peer.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.5 |
hpnicfMplsLdpPeerKeepAliveHoldTimerThe two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.6 |
hpnicfMplsLdpPeerLabelDistributionMethodFor any given LDP session, the method of label distribution must be specified.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.7 |
hpnicfMplsLdpPeerTypeIndicates whether a peer is a local peer or a remote peerrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.8 |
hpnicfMplsLdpPeerRowStatusAn object that allows entries in this table to be created and deleted using the RowStatus convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.9 |
hpnicfMplsLdpPeerConfAtmLabelRangeTableThe MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table. SEQUENCE OF HpnicfMplsLdpPeerConfAtmLabelRangeEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2 |
hpnicfMplsLdpPeerConfAtmLabelRangeEntryA row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table. HpnicfMplsLdpPeerConfAtmLabelRangeEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1 |
hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVPIThe minimum VPI number configured for this range. AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.1 |
hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVCIThe minimum VCI number configured for this range. AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.2 |
hpnicfMplsLdpPeerConfAtmLabelRangeUpperBoundVPIThe maximum VPI number configured for this range.ro AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.3 |
hpnicfMplsLdpPeerConfAtmLabelRangeUpperBoundVCIThe maximum VCI number configured for this range.ro AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.4 |
hpnicfMplsLdpSessionObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4 |
hpnicfMplsLdpSessionTableA table of Sessions between the LDP Entities and LDP Peers. SEQUENCE OF HpnicfMplsLdpSessionEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1 |
hpnicfMplsLdpSessionEntryAn entry in this table represents information on a single session between an LDP Entity and LDP Peer. HpnicfMplsLdpSessionEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1 |
hpnicfMplsLdpSessionIndexAn unique identifier for this entry such that it identifies a specific LDP Session. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.1 |
hpnicfMplsLdpSessionIDThe LDP Session identifier.ro MplsLdpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.2 |
hpnicfMplsLdpSessionProtocolVersionThe version of the LDP Protocol which this session is using.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.3 |
hpnicfMplsLdpSessionKeepAliveHoldTimeRemainingThe keep alive hold time remaining for this session.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.4 |
hpnicfMplsLdpSessionRoleAn indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.5 |
hpnicfMplsLdpSessionStateThe current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.6 |
hpnicfMplsLdpSessionAtmLabelRangeLowerBoundVPIThe minimum VPI number for this range.ro AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.7 |
hpnicfMplsLdpSessionAtmLabelRangeLowerBoundVCIThe minimum VCI number for this range.ro AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.8 |
hpnicfMplsLdpSessionAtmLabelRangeUpperBoundVPIThe maximum VPI number for this range.ro AtmVpIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.9 |
hpnicfMplsLdpSessionAtmLabelRangeUpperBoundVCIThe maximum VCI number for this range.ro AtmVcIdentifier .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.10 |
hpnicfMplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5 |
hpnicfMplsLdpHelloAdjacencyTableA table of Hello Adjacencies for Sessions. SEQUENCE OF HpnicfMplsLdpHelloAdjacencyEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1 |
hpnicfMplsLdpHelloAdjacencyEntryEach row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. HpnicfMplsLdpHelloAdjacencyEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1 |
hpnicfMplsLdpHelloAdjacencyIndexAn identifier for the adjacency. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1.1 |
hpnicfMplsLdpHelloAdjacencyHoldTimeRemainingThe time remaining for this Hello Adjacency.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1.2 |
hpnicfMplsLdpCrlspTnlObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6 |
hpnicfMplsLdpCrlspTnlTableThe hpnicfMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hpnicfMplsLdpCrlspErHopTable. SEQUENCE OF HpnicfMplsLdpCrlspTnlEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1 |
hpnicfMplsLdpCrlspTnlEntryAn entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator. HpnicfMplsLdpCrlspTnlEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1 |
hpnicfMplsLdpCrlspTnlIndexUniquely identifies this row.ro MplsTunnelIndex .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.1 |
hpnicfMplsLdpCrlspTnlNameThe 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.2 |
hpnicfMplsLdpCrlspTnlDirectionWhether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.3 |
hpnicfMplsLdpCrlspTnlSignallingProtoThe signaling protocol, if any, that set up this tunnel.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.4 |
hpnicfMplsLdpCrlspTnlSetupPrioThe setup priority of this tunnel.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.5 |
hpnicfMplsLdpCrlspTnlHoldingPrioThe holding priority for this tunnel.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.6 |
hpnicfMplsLdpCrlspTnlPeakDataRateThe peak rate - the maximum rate at which traffic will be sent on the CRLSP.rw BitRate UNITS "bits per second" .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.7 |
hpnicfMplsLdpCrlspTnlPeakBurstSizeThe peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.rw BurstSize UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.8 |
hpnicfMplsLdpCrlspTnlCommittedDataRateThe committed rate - the committed rate at which traffic will be sent on the CRLSP.rw BitRate UNITS "bits per second" .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.9 |
hpnicfMplsLdpCrlspTnlCommittedBurstSizeThe committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.rw BurstSize UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.10 |
hpnicfMplsLdpCrlspTnlExcessBurstSizeThe Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.rw BurstSize UNITS "bytes" .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.11 |
hpnicfMplsLdpCrlspTnlIsPinnedIndicates whether the loose-routed hops of this tunnel are to be pinned.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.12 |
hpnicfMplsLdpCrlspTnlFrequencyIndicates the frequency of usage of the established CRLSP.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.13 |
hpnicfMplsLdpCrlspTnlWeightIndicates the weight that is the established CRLSP.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.14 |
hpnicfMplsLdpCrlspTnlRowStatusFor controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hpnicfMplsLdpErHopTable, associated with this tunnel.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.15 |
hpnicfMplsLdpCrlspErHopTableThe hpnicfMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hpnicfMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hpnicfMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel. SEQUENCE OF HpnicfMplsLdpCrlspErHopEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2 |
hpnicfMplsLdpCrlspErHopEntryAn entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP. HpnicfMplsLdpCrlspErHopEntry .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1 |
hpnicfMplsLdpCrlspErHopIndexSecondary index into this table identifying the particular hop. INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.1 |
hpnicfMplsLdpCrlspErHopAddrTypeAddress type of this hop.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.2 |
hpnicfMplsLdpCrlspErHopIpv4AddrIf hpnicfMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.3 |
hpnicfMplsLdpCrlspErHopIpv4PrefixLenIf hpnicfMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.4 |
hpnicfMplsLdpCrlspErHopStrictOrLooseWhether this is a strict or loose hop.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.5 |
hpnicfMplsLdpCrlspErHopRowStatusFor creating, modifying and deleting this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.6 |
hpnicfMplsLdpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2 |
hpnicfMplsLdpNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0 |
hpnicfMplsLdpFailedInitSessionThresholdExceededThis notification is generated whenever the value of hpnicfMplsLdpEntityFailedInitSessionThreshold is exceeded. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.1 |
hpnicfMplsLdpCrlspTunnelUpThis notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.2 |
hpnicfMplsLdpCrlspTunnelDownThis notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc., NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.3 |
hpnicfMplsLdpCrlspTunnelSetupFailureThis notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc., NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.4 |
hpnicfMplsLdpIncarnUpEventFailureThis notification is generated by LDP to notify the Incarnation UP Event failure NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.11 |
hpnicfMplsLdpIncarnDownEventFailureThis notification is generated by LDP to notify the Incarnation DOWN Event failure NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.12 |
hpnicfMplsLdpEntityUpEventFailureThis notification is generated by LDP to notify the ENTITY UP Event failure NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.13 |
hpnicfMplsLdpEntityDownEventFailureThis notification is generated by LDP to notify the ENTITY DOWN Event failure NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.14 |
hpnicfMplsLdpSessionUpEventFailureGeneration of this trap occurs when the value of 'hpnicfMplsLdpSessionState' enters the 'operational(5)' state. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.15 |
hpnicfMplsLdpSessionDownEventFailureGeneration of this trap occurs when the value of 'hpnicfMplsLdpSessionState' leaves the 'operational(5)' state. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.12.2.2.0.16 |