HPN-ICF-PBR-MIB
AI MIB Summary
The HPN-ICF-PBR-MIB module manages Policy-Based Routing (PBR) configuration and operational state on Hewlett Packard Networking (HPN) devices, enabling the monitoring of user-defined routing policies that override standard destination-based forwarding logic. It provides visibility into PBR rule definitions, associated next-hop selections, and packet matching statistics to ensure traffic is steered according to specific administrative criteria rather than the IP routing table.
This MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing.
Main OID:
hpnicfPBR.1.3.6.1.4.1.11.2.14.11.15.2.113
50
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
50 total| Object Name |
|---|
hpnicfPBRThis MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.113 |
hpnicfPBRObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.1 |
hpnicfPBRGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.1.1 |
hpnicfPBRNexthopTrapEnabledThe value is a global setting only for IPv4 PBR. If the value is set to 'false', the feature is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.1 |
hpnicfPBRLocalPolicyThe value is a global setting. An existing policy name setting enables local PBR for IPv4 packets initiated by the device. Only one policy can be applied locally. An empty name setting disables the feature.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.2 |
hpnicfPBRIPv6NexthopTrapEnabledThe value is a global setting only for IPv6 PBR. If the value is set to 'false', the feature is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.3 |
hpnicfPBRMibTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2 |
hpnicfPBRTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1 |
hpnicfPBRNexthopAddrTypeIndicating address type of hpnicfPBRNexthopAddr, which can be IPv4 or IPv6.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.1 |
hpnicfPBRNexthopAddrThe involved next hop IP address of trap information.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.2 |
hpnicfPBRTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2 |
hpnicfPBRTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0 |
hpnicfPBRNexthopFailedTrapWhen the next hop of PBR apply clause became unreachable according to routing information, trap is generated and is sent to the remote monitoring device. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0.1 |
hpnicfPBRTables OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.113.2 |
hpnicfPBRMibPolicyNodeTableA table for PBR nodes. SEQUENCE OF HpnicfPBRMibPolicyNodeEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1 |
hpnicfPBRMibPolicyNodeEntryAn entry for PBR nodes. HpnicfPBRMibPolicyNodeEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1 |
hpnicfPBRMibPolicyNodeAddrTypeAddress type of policy node, which can be IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.1 |
hpnicfPBRMibPolicyNamePolicy name of PBR node. DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.2 |
hpnicfPBRMibPolicyNodeIdSequence identifier of PBR node. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.3 |
hpnicfPBRMibPolicyNodeModeMode of PBR node. If the mode of a node is marked as true, the packets that meet the matching rules are processed by action rules in the node. If the mode of a node is marked as false, the packets that meet the matching rules are sent back to the normal forwarding path.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.4 |
hpnicfPBRMibPolicyNodeRowStatusOperation status of this table entry. Three actions are used: active, createAndGo, and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.5 |
hpnicfPBRMibIfPolicyTableA table for interfaces being applied with PBR nodes with the same policy name. SEQUENCE OF HpnicfPBRMibIfPolicyEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.2 |
hpnicfPBRMibIfPolicyEntryAn entry for reference relation between interface and policy nodes. HpnicfPBRMibIfPolicyEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1 |
hpnicfPBRMibPolicyAddressTypeAddress type of policy node, which can be IPv4 or IPv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.1 |
hpnicfPBRMibAppliedPolicyNamePolicy name of PBR nodes.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.2 |
hpnicfPBRMibIfPolicyRowStatusOperation status of this table entry. Three actions are used: active, createAndGo, and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.3 |
hpnicfPBRMibMatchAclTableA table for ACLs being used by a policy node. Only one ACL can be used within a node at most. SEQUENCE OF HpnicfPBRMibMatchAclEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.3 |
hpnicfPBRMibMatchAclEntryAn entry for policy node that uses an ACL group as its if-match rule. HpnicfPBRMibMatchAclEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1 |
hpnicfPBRMibAclGroupIdIndex of number-acl group. Setting -1 indicates closing this rule.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1.1 |
hpnicfPBRMibApplyPrecedenceTableA table for precedence values being used by a policy node. Only one precedence value can be used within a node at most. SEQUENCE OF HpnicfPBRMibApplyPrecedenceEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.4 |
hpnicfPBRMibApplyPrecedenceEntryAn entry for policy node with an action to set IP precedence for matching packets. HpnicfPBRMibApplyPrecedenceEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1 |
hpnicfPBRMibApplyPrecedenceValueValue of precedence being applied on IP header. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) Setting -1 indicates closing this action.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1 |
hpnicfPBRMibApplyNexthopTableA table for next hop actions being used by a policy node. SEQUENCE OF HpnicfPBRMibApplyNexthopEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5 |
hpnicfPBRMibApplyNexthopEntryAn entry for policy node with an action to set next hop for matching packets. HpnicfPBRMibApplyNexthopEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1 |
hpnicfPBRMibApplyNexthopIndexIndex of next hop for the apply next hop action. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.1 |
hpnicfPBRMibApplyNexthopVpnNameName of VPN instance where apply next hop action is used.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.2 |
hpnicfPBRMibApplyNexthopAddressTypeAddress type of hpnicfPBRMibApplyNexthopAddress, which can be IPv4 or IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.3 |
hpnicfPBRMibApplyNexthopAddressNext hop IP address of apply next hop action.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.4 |
hpnicfPBRMibApplyNexthopTrackIdIdentifier of track object related with next hop. Setting 0 indicates closing this function.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.5 |
hpnicfPBRMibApplyNexthopDirectDirect route attribute of next hop according to route information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.6 |
hpnicfPBRMibApplyNexthopRowStatusOperation status of this table entry. Three actions are used: active, createAndGo, and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.7 |
hpnicfPBRMibApplyDefaultNexthopTableA table for default next hop actions being used by a policy node. SEQUENCE OF HpnicfPBRMibApplyDefaultNexthopEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6 |
hpnicfPBRMibApplyDefaultNexthopEntryAn entry for policy node with an action to set default next hop for matching packets. HpnicfPBRMibApplyDefaultNexthopEntry .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1 |
hpnicfPBRMibApplyDefaultNexthopIndexIndex of default next hop for the apply default next hop action. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.1 |
hpnicfPBRMibApplyDefaultNexthopVpnNameName of VPN instance where apply default next hop action is used.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.2 |
hpnicfPBRMibApplyDefaultNexthopAddressTypeAddress type of hpnicfPBRMibApplyDefaultNexthopAddress, which can be IPv4 or IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.3 |
hpnicfPBRMibApplyDefaultNexthopAddressNext hop IP address of apply default next hop action.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.4 |
hpnicfPBRMibApplyDefaultNexthopTrackIdIdentifier of track object related with default next hop. Setting 0 indicates closing this function.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.5 |
hpnicfPBRMibApplyDefaultNexthopDirectDirect route attribute of apply default next hop address according to route information.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.6 |
hpnicfPBRMibApplyDefaultNexthopRowStatusOperation status of this table entry. Three actions are used: active, createAndGo, and destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.7 |