HPN-ICF-DOT11-WLANEXT-MIB
AI MIB Summary
The HPN-ICF-DOT11-WLANEXT-MIB enables monitoring and management of HP ProCurve wireless infrastructure, specifically tracking Fat and Fit Access Point states, CAPWAP tunnel configurations, and IEEE 802.11e QoS parameters within Basic Service Sets. This module facilitates granular visibility into radio transceiver operations, access control controller interactions, and 802.11 standard compliance metrics for enterprise WLAN environments.
This MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
Main OID:
hpnicfDot11WLANEXT.1.3.6.1.4.1.11.2.14.11.15.2.75.7
22
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
hpnicfDot11WLANEXTThis MIB provides more information for WLAN network. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11e Standard to define the MAC procedures to support LAN applications with Quality of Service (QoS) requirements, including the transport of voice, audio and video over IEEE 802.11 wireless LANs. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.75.7 |
hpnicfDot11RFGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1 |
hpnicfDot11RFSignalStatisTableThe table will describe statistic information of signal strength for AP radio. SEQUENCE OF HpnicfDot11RFSignalStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1 |
hpnicfDot11RFSignalStatisEntryEach entry contains the signal of each signal strength information of a specific AP. HpnicfDot11RFSignalStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1 |
hpnicfDot11RFAPIDTo identify each AP, and AP is running status. HpnicfDot11ObjectIDType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.1 |
hpnicfDot11RFRadioIDRepresents each radio. HpnicfDot11RadioScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.2 |
hpnicfDot11RFSignalStatisIntervRepresents the interval of statistic.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.3 |
hpnicfDot11RFAverageSignalStrengthRepresents the average value of signal strength for stations on a specific radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.4 |
hpnicfDot11RFMaxSignalStrengthRepresents the maximum value of signal strength for stations on a specific radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.5 |
hpnicfDot11RFMinSignalStrengthRepresents the minimum value of signal strength for stations on a specific radio.ro Integer32 UNITS "dBm" .1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.6 |
hpnicfDot11QosGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2 |
hpnicfDot11QosStatisTableThe table defines the attributes for the Qos feature of radio. SEQUENCE OF HpnicfDot11QosStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1 |
hpnicfDot11QosStatisEntryEach entry contains information of the Qos attribute of each radio. HpnicfDot11QosStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1 |
hpnicfDot11QosAPIDTo uniquely identify a AP in running status. HpnicfDot11ObjectIDType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.1 |
hpnicfDot11QosRadioIDRepresents each radio. HpnicfDot11RadioScopeType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.2 |
hpnicfDot11QosAverageQueLenThe average frame numbers to be sent out in the queue.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.3 |
hpnicfDot11QosDropFrameRatioThe ratio of dropped frames in a minute because of full queue.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.4 |
hpnicfDot11QosAverageDataRateThe average transmit data rate of radio.ro Integer32 UNITS "Kbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.5 |
hpnicfDot11QosAcStatisTableThe table defines the parameters for Qos access category. SEQUENCE OF HpnicfDot11QosAcStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2 |
hpnicfDot11QosAcStatisEntryEach entry contains information of each Qos access category. HpnicfDot11QosAcStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1 |
hpnicfDot11QosAcTypeThe access category type. HpnicfDot11QosAcType (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.1 |
hpnicfDot11AcDropFrameCntThe number of dropped frames in a minute for one specific access category because of full queue.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.2 |