HPN-ICF-LswRSTP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
40
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
hpnicfLswRstpMib MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.6 |
hpnicfLswRstpMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1 |
hpnicfRstpEventsV2Definition point for RSTP notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0 |
hpnicfRstpBpduGuardedThe SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.1 |
hpnicfRstpRootGuardedThe SNMP trap that is generated when a root-guard port receives a superior bpdu. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.2 |
hpnicfRstpBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.3 |
hpnicfRstpLoopGuardedThe SNMP trap that is generated when a loop-guard port is aged out . NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.0.4 |
hpnicfdot1dStpStatusBridge STP enabled/disabled staterw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.1 |
hpnicfdot1dStpForceVersionRunning mode of the bridge RSTP state machinerw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.2 |
hpnicfdot1dStpDiameterPermitted amount of bridges between any two ends on the network.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.3 |
hpnicfdot1dStpRootBridgeAddressMAC address of the root bridgero MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.4 |
hpnicfdot1dStpPortXTableRSTP extended information of the port SEQUENCE OF HpnicfDot1dStpPortXEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5 |
hpnicfdot1dStpPortXEntryRSTP extended information of the port HpnicfDot1dStpPortXEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1 |
hpnicfdot1dStpPortStatusRSTP status of the portrw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.1 |
hpnicfdot1dStpPortEdgeportWhether the port can be an edge portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.2 |
hpnicfdot1dStpPortPointToPointIt is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hpnicfdot1dStpOperPortPointToPoint.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.3 |
hpnicfdot1dStpMcheckCheck if the port transfer state machine entersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.4 |
hpnicfdot1dStpTransLimitPacket transmission limit of the bridge in a duration of Hello Time.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.5 |
hpnicfdot1dStpRXStpBPDUNumber of STP BPDU receivedro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.6 |
hpnicfdot1dStpTXStpBPDUNumber of STP BPDU transmittedro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.7 |
hpnicfdot1dStpRXTCNBPDUNumber of TCN BPDU receivedro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.8 |
hpnicfdot1dStpTXTCNBPDUNumber of TCN BPDU transmittedro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.9 |
hpnicfdot1dStpRXRSTPBPDUNumber of RSTP BPDU receivedro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.10 |
hpnicfdot1dStpTXRSTPBPDUNumber of RSTP BPDU transmittedro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.11 |
hpnicfdot1dStpClearStatisticsClear RSTP statistics. Read operation not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.12 |
hpnicfdot1dSetStpDefaultPortCostSet PathCost back to the default setting. Read operation not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.13 |
hpnicfdot1dStpRootGuardIf the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.14 |
hpnicfdot1dStpLoopGuardLoop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.rw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.15 |
hpnicfdot1dStpPortBlockedReasonRecord the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.16 |
hpnicfdot1dStpRXTCBPDUThe number of received TC BPDUsro Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.17 |
hpnicfdot1dStpPortSendingBPDUTypeType of BPDU which the port is sending.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.18 |
hpnicfdot1dStpOperPortPointToPointThis object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hpnicfdot1dStpPortPointToPoint.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.5.1.19 |
hpnicfDot1dStpBpduGuardIf BPDU guard enabled. The edge port will discard illegal BPDU when enabledrw EnabledStatus .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.6 |
hpnicfDot1dStpRootTypeRoot type of the bridgerw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.7 |
hpnicfDot1dTimeOutFactorTime Out Factor of the bridge.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.8 |
hpnicfDot1dStpPathCostStandardPath Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.9 |
hpnicfdot1dStpIgnoredVlanTableRSTP extended information of vlan SEQUENCE OF HpnicfDot1dStpIgnoredVlanEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10 |
hpnicfdot1dStpIgnoredVlanEntryRSTP extended information of the vlan HpnicfDot1dStpIgnoredVlanEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1 |
hpnicfdot1dVlanVlan id supportedro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.1 |
hpnicfdot1dStpIgnoreWhether the vlan is stp Ignoredrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.6.1.10.1.2 |