HPN-ICF-NAT-MIB
AI MIB Summary
The HPN-ICF-NAT-MIB provides SNMP objects for configuring and monitoring Network Address Translation (NAT) parameters on Hewlett Packard Enterprise (HPE) Intelligent Call Flow (ICF) network devices. It enables the retrieval of NAT session states, translation table entries, and policy configurations to facilitate remote management of address translation services.
This MIB contains objects to manage configuration of NAT. There are no constraints on this MIB.
Main OID:
hpnicfNat.1.3.6.1.4.1.11.2.14.11.15.2.18
111
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
111 total| Object Name |
|---|
hpnicfNatThis MIB contains objects to manage configuration of NAT.
There are no constraints on this MIB. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.18 |
hpnicfNATGlobalVars OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.18.1 |
hpnicfNATClearSession OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.1 |
hpnicfNATClearSessionSlotNoThe number of NAT board in which administrator wants to
clear data of the session. In router, the value is 255
because no NAT board in it. This node only supports 'set' operation.
The return value of 'get' operation is meaningless.rw INTEGER (1..14 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.18.1.1.1 |
hpnicfNATBLConnectLimitPara OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2 |
hpnicfNATBLConnectHighValueThe maximal connection amount. If the connection amount exceeds the
value, the IP address will be added into blacklist. The IP address
will not be removed from blacklist until the connection amount is
less than the minimal connection amount.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.1 |
hpnicfNATBLConnectLowValueThe minimal connection amount.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.2 |
hpnicfNATBLConnectHighRateThe maximal connection rate(in second). If the connection rate exceed the
value, the IP address will be added into blacklist. The IP address
will not be removed from blacklist until the connection rate is
less than the minimal connection rate.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.3 |
hpnicfNATBLConnectLowRateThe minimal connection rate(in second).rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.4 |
hpnicfNATBLSpecialConnectHighRateThe maximal special connection rate(in second). When administrator
wants to control the speed of connection, he can selects the connection
speed rate or special connection rate.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.5 |
hpnicfNATBLSpecialConnectLowRateThe minimal special connection rate(in second).rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.2.6 |
hpnicfNATBLCtrlEnable OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.3 |
hpnicfNATBLConnectSumEnableEnable or disable the connection amount control.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.1.3.1 |
hpnicfNATBLConnectRateEnableEnable or disable the connection rate control.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.1.3.2 |
hpnicfNATNPTimer OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.18.1.4 |
hpnicfNATNPAgingTimeThere are two kinds of aging time in NP. One is fast and the other is
slow. Administrator can select one or other. The defalult is fast.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.1.4.1 |
hpnicfNATMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.18.2 |
hpnicfNATPoolInfoTableNAT address pool table : The address in the pool is
the IP address in the global network. The pool can span
255 IP addresses.All address pools configured by administrator
are recorded in this table. SEQUENCE OF HpnicfNATPoolInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1 |
hpnicfNATPoolInfoEntryThe entry of NAT address pool table. HpnicfNATPoolInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1 |
hpnicfNATPoolIdxIndex of the address pool: The index uniquely indicates
the address pool in the system, and its range is from 1 to 320. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.1 |
hpnicfNATPoolStartIpAddrThe start IP address of address pool:
It must be less than or equal to the end IP address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.2 |
hpnicfNATPoolEndIpAddrThe end IP address of address pool:
It must be more than or equal to the start IP address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.3 |
hpnicfNATPoolSlotNoThe number of NAT board to which the address pool is bound.
The address translation is processed by this NAT board .
The relation between address pool and slotNo is n:1.
When the address pool is not bound to the NAT board,the value is 255.rw INTEGER (1..14 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.4 |
hpnicfNATPoolRefCounterThe counter of reference. A address pool can be associated with
more than one ACL and the counter of reference is recorded in this
field. When the address pool is not associated with ACL, the value is 0.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.5 |
hpnicfNATPoolRowStatusOnly support 'destroy' and 'createAndGo'.
If hpnicfNATPoolIdx, hpnicfNATPoolStartIpAddr and
hpnicfNATPoolEndIpAddr were provided correctly,
its value is changed 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.1.1.6 |
hpnicfNATOutboundTableNAT out bound table: through associating ACL number,
address pool with NAT board, administrator can designate
which inside IP address can be translated to global IP
address in the pool and the translation is processed by
which NAT board. SEQUENCE OF HpnicfNATOutboundEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2 |
hpnicfNATOutboundEntryThe entry of NAT out bound table. HpnicfNATOutboundEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1 |
hpnicfNATOutboundAclNoThe number of ACL(Access Control List). When the packet accords with
the rule in the ACL, its source IP address will be translated to IP
address in Address pool. INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.1 |
hpnicfNATOutboundPoolIdxThe index of address pool in hpnicfNATPoolInfoTable.
when administrator doesn't use the address pool and
use the IP address of the interface as the address of
global network, the value is 2147483647.rw INTEGER (0..320 | 2147483647) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.2 |
hpnicfNATOutboundIsNoPatWhether to use no pat manner. The translation of no pat
is that the translation doesn't use the port information of packet.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.3 |
hpnicfNATOutboundSlotNoThe number of NAT board. In router, the value is 255 because no NAT board in it.rw Integer32 (1..14 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.4 |
hpnicfNATOutboundRowStatusOnly support 'destroy' and 'createAndGo'.
If hpnicfNATOutboundAclNo or hpnicfNATOutboundAclNo
and hpnicfNATOutboundPoolIdx were provided correctly,
its value is changed 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.2.1.5 |
hpnicfNATServerTableNAT inside Server Table. Administrator can configure server in the
private network which can provide service for people in the public network.
The translation map is :
(InsideIP , InsidePort
(InsideIP + 1 , InsidePort
(InsideIP + 2 , InsidePort
...
...
...
(InsideIP+n(=InsideIP2),InsidePort SEQUENCE OF HpnicfNATServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3 |
hpnicfNATServerEntryThe entry of NAT inside server table. HpnicfNATServerEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1 |
hpnicfNATServerProTypeThe type of protocol: icmp(1), tcp(6), udp(17) and others. INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.1 |
hpnicfNATServerGlobalIPThe global IP address of Inside Server. IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.2 |
hpnicfNATServerStartGlobalPortThe start global port of Inside Server.
When the port need not be configured, the value is 0. INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.3 |
hpnicfNATServerEndGlobalPortThe end global port of Inside Server. When administrator doesn't
configure a series of inside server, the value is 0.
If the value is not zero, the value of (GlobalPort2-GlobalPort)
must be equal to (InsideIP2 - InsideIP).rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.4 |
hpnicfNATServerStartInsideIPThe start private IP address of Inside Server.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.5 |
hpnicfNATServerEndInsideIPThe end private IP address of Inside Server. When administrator doesn't
configure a series of inside server, the value is 0.0.0.0.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.6 |
hpnicfNATServerInsidePortThe private port of Inside Server.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.7 |
hpnicfNATServerSlotNoThe number of NAT board. In router, the value is 255 because no NAT board in it.rw Integer32 (1..14 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.8 |
hpnicfNATServerVpnIndexThe VPN index of server. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.10 |
hpnicfNATServerAclNumberNumber of basic or advanced acl.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.11 |
hpnicfNATServerRowStatusOnly support 'destroy' and 'createAndGo'.
If hpnicfNATServerProType, hpnicfNATServerGlobalIP, hpnicfNATServerGlobalPort
and hpnicfNATServerInsideIP were provided correctly,
its value is changed 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.3.1.12 |
hpnicfNATTimeOutTableNAT Time out Table. When a connection is established,
if there are not any actives in this connection between
the time, it will be disconnected. SEQUENCE OF HpnicfNATTimeOutEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.4 |
hpnicfNATTimeOutEntryThe entry of NAT Time out Table. HpnicfNATTimeOutEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1 |
hpnicfNATTimeOutProtocolThe type of protocol. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1.1 |
hpnicfNATTimeOutTimeValueThe time of time out.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.4.1.2 |
hpnicfNATBLEnableTableNAT blacklist function Enable Table. In this table, administrator can decide
whether to start the function of blacklist in the NAT board.
When the function of blacklist can't be set for a NAT board,
the number of NAT board is 256. SEQUENCE OF HpnicfNATBLEnableEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.5 |
hpnicfNATBLEnableEntryThe entry of NAT blacklist Enable Table. HpnicfNATBLEnableEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1 |
hpnicfNATBLEnableSlotNoThe number of NAT board.
When the function of blacklist can't be set for a NAT board,
the value is 255. Integer32 (1..14 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1.1 |
hpnicfNATBLEnableStart or stop of function of balcklist.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.5.1.2 |
hpnicfNATBLIPConnectLimitParaTableThe table of connection control of special IP address. In this table, administrator can decide to
adopt which manner to control the connection which IP address is the
special IP address. SEQUENCE OF HpnicfNATBLIPConnectLimitParaEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6 |
hpnicfNATBLIPConnectLimitParaEntryThe entry of the table of connection control of special IP address. HpnicfNATBLIPConnectLimitParaEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1 |
hpnicfNATBLIPConnectLimitParaIPThe special IP address. The IP is private IP address. IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.1 |
hpnicfNATBLIPConnectHighValueThe maximal connection amount. It must be more than the minimal connection amount.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.2 |
hpnicfNATBLIPConnectLowValueThe minimal connection amount. It must be less than the maximal connection amount.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.3 |
hpnicfNATBLIPUseSpecialConnectRateWhether to use the special connection rate control.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.4 |
hpnicfNATBLIPConnectLimitRowStatusOnly support 'destroy' and 'createAndGo'.
If hpnicfNATBLIPConnectHighValue, hpnicfNATBLIPConnectLowValue
and hpnicfNATBLIPUseSpecialConnectRate were provided correctly,
its value is changed 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.6.1.5 |
hpnicfNATBLManagerTableThe management table of blacklist.
The table doesn't support 'getnext' operation. SEQUENCE OF HpnicfNATBLManagerEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.7 |
hpnicfNATBLManagerEntryThe entry of management table of blacklist. HpnicfNATBLManagerEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1 |
hpnicfNATBLIpAdressThe IP address of entry of blacklist. IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.1 |
hpnicfNATBLSlotNoThe number of NAT board. INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.2 |
hpnicfNATBLConSumThe connection amount.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.3 |
hpnicfNATBLConSpdThe state of connection rate:
red(1) : the connection rate is above the upper limit.
yellow(2): the connection rate is between the upper and lower limit.
green(3) : the conneciton rate is below the lower limit.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.7.1.4 |
hpnicfNATStatTableThe statistics information table of NAT module. SEQUENCE OF HpnicfNATStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8 |
hpnicfNATStatEntryThe entry of statistics information table of NAT module. HpnicfNATStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1 |
hpnicfNATStatNATBoardNoThe number of NAT board. In router, the value is 255 because no NAT board in it. Integer32 (1..14 | 255) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.1 |
hpnicfNATStatActiveTblCountActive PAT session count In software.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.2 |
hpnicfNATStatActiveTblCountInNPActive PAT session count In NP.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.3 |
hpnicfNATStatActiveNatTblCountActive NO-PAT session count.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.4 |
hpnicfNATStatActiveSvrTblCountActive SERVER session count.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.5 |
hpnicfNATStatActivePoolTblCountActive address pool session count.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.6 |
hpnicfNATStatNumOfUsedPortThe number of used port in NP.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.7 |
hpnicfNATStatNumOfGoodPktThe number of good packet in NP.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.8 |
hpnicfNATStatNumOfBadPktThe number of bad packet in NP.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.9 |
hpnicfNATStaticSessionCountActive STATIC session count.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.10 |
hpnicfNATFragmentSessionCountActive fragment packet session count.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.11 |
hpnicfNATSequenceSessionCountActive session table count hash by private IP.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.12 |
hpnicfNATLogCountBuffered Nat LOG table count.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.8.1.13 |
hpnicfNATSessionTableThe nat session information table. There is the address translation information in the table.
The sketch map of connection is
pc1(private Net)>Server(public Net)
InsideIP, InsidePort>translating to GlobalIP, GlobalPort SEQUENCE OF HpnicfNATSessionEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9 |
hpnicfNATSessionEntryThe entry of session information table. HpnicfNATSessionEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1 |
hpnicfNATSessionHashNumberThe row number of the hash table. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.1 |
hpnicfNATSessionProtocolThe protocol type of session. INTEGER .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.2 |
hpnicfNATSessionGlobalIPThe global IP of session.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.3 |
hpnicfNATSessionGlobalPortThe global port of session.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.4 |
hpnicfNATSessionInsideIPThe Inside IP of session. IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.5 |
hpnicfNATSessionInsidePortThe Inside port of session. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.6 |
hpnicfNATSessionPeerIPThe peer IP of session. IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.7 |
hpnicfNATSessionPeerPortThe peer port of session. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.8 |
hpnicfNATSessionVpnIndexThe VPN index of session. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.9 |
hpnicfNATSessionTTLThe TTL of session.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.10 |
hpnicfNATSessionStatusThe status of session.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.11 |
hpnicfNATSessionLeftTimeThe Left time of session.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.9.1.12 |
hpnicfNATStaticConfTableStatic Nat configuration table. SEQUENCE OF HpnicfNATStaticConfEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.10 |
hpnicfNATStaticConfEntryConfigure static Nat. HpnicfNATStaticConfEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1 |
hpnicfNATStaticInsideIpInside ip address. IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.1 |
hpnicfNATStaticGlobalIpGlobal Ip address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.2 |
hpnicfNATStaticRowStatusOnly support 'destroy' and 'createAndGo'.
If hpnicfNATStaticInsideIp and hpnicfNATStaticGlobalIp were provided correctly,
its value is changed 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.10.1.3 |
hpnicfNATStaticEnableTableActive the static Nat on interface. SEQUENCE OF HpnicfNATStaticEnableEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.11 |
hpnicfNATStaticEnableEntryActive the static Nat on interface. HpnicfNATStaticEnableEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.11.1 |
hpnicfNATStaticEnableEnable/disable the static Nat on the interface(hpnicfNatStaticEnableIfIndex).
disable (0)
enable (1)rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.11.1.2 |
hpnicfNATDnsMapTableThis table is used to set mapping of DNS. SEQUENCE OF HpnicfNATDnsMapEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12 |
hpnicfNATDnsMapEntryThe entry of hpnicfNATDnsMapTable. HpnicfNATDnsMapEntry .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1 |
hpnicfNATDnsMapDomainNameDomain name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.1 |
hpnicfNATDnsMapGlobalIpGlobal IP address.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.2 |
hpnicfNATDnsMapGlobalPortGlobal port number.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.3 |
hpnicfNATDnsMapProtocolTypeTCP Transmission Control Protocol.
UDP User Datagram Protocol.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.4 |
hpnicfNATDnsMapLastUseTimeIts value is the time that the device uses
from startup to last use 'Dns Map'record.
If the value is 0,the device never use this
record.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.5 |
hpnicfNATDnsMapRowStatusOnly support 'destroy' and 'createAndGo'.
If hpnicfNATDnsMapDomainName, hpnicfNATDnsMapGlobalIp
and hpnicfNATDnsMapGlobalPortor hpnicfNATDnsMapDomainName,
hpnicfNATDnsMapGlobalIp, hpnicfNATDnsMapGlobalPort and
hpnicfNATDnsMapProtocolType were provided correctly,
its value is changed 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.18.2.12.1.6 |