HPN-ICF-PROT-PRIORITY-MIB
AI MIB Summary
The HPN-ICF-PROT-PRIORITY-MIB enables network administrators to monitor and configure Quality of Service (QoS) protocol priority levels for specific traffic classes on HP ProCurve and Aruba networking devices. This module facilitates granular control over packet scheduling and forwarding precedence for routers and switches to ensure deterministic performance for critical applications.
This MIB is used to manage and configure the priority of specified protocol. This MIB is applicable to routers, switches and other products.
Main OID:
hpnicfProtocolPriority.1.3.6.1.4.1.11.2.14.11.15.2.37
9
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
9 total| Object Name |
|---|
hpnicfProtocolPriorityThis MIB is used to manage and configure the priority of specified protocol. This MIB is applicable to routers, switches and other products. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.37 |
hpnicfProtocolPriorityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.37.1 |
hpnicfPPri OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1 |
hpnicfProtocolPriorityTableA table is used to configure the priority of the protocol. SEQUENCE OF HpnicfProtocolPriorityEntry .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1 |
hpnicfProtocolPriorityEntryAn entry containing information about the priority of the protocol. HpnicfProtocolPriorityEntry .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1 |
hpnicfPPriProtocolTypeProtocol type. Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.1 |
hpnicfPPriPriorityTypePriority type.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.2 |
hpnicfPPriPriorityVlauePriority value. If setting hpnicfPPriPriorityType to ip-precedence(1), the range of hpnicfPPriPriorityVlaue is from 0 to 7. If setting hpnicfPPriPriorityType to dscp(2), the range of hpnicfPPriPriorityVlaue is from 0 to 63.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.3 |
hpnicfPPriRowStatusRowStatus, Now support createAndGo,active and destroy. To create a new row, hpnicfPPriPriorityType and hpnicfPPriPriorityValue must be specified. To modify a row,hpnicfPPriPriorityType and hpnicfPPriPriorityValue must change at the same time and the hpnicfPPriRowStatus is active .rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.37.1.1.1.1.4 |