HPN-ICF-MAC-INFORMATION-MIB
AI MIB Summary
The HPN-ICF-MAC-INFORMATION-MIB enables remote monitoring of MAC address configuration changes and current MAC information states on HPE Aruba Networking (formerly HP) ICF switches. It facilitates the detection and reporting of dynamic MAC table modifications, such as address additions, deletions, or aging events, to ensure network visibility into layer 2 topology shifts.
This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device.
Main OID:
hpnicfMACInformation.1.3.6.1.4.1.11.2.14.11.15.2.87
37
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
hpnicfMACInformationThis MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.87 |
hpnicfMACInformationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1 |
hpnicfMACInformationMibGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1 |
hpnicfMACInformationEnabledThe value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop working even there are interfaces that have been enabled the feature.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.1 |
hpnicfMACInformationcSendIntervalThe maximum interval that the device generate syslogs or traps. The unit is second.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.2 |
hpnicfMACInformationLearntMACNumThe number of MAC addresses that learnt by the device since the hpnicfMACInformationEnabled is set to enabled(1) and hpnicfMACLearntEnable is set to enabled(1) at least on one interface. If the hpnicfMACInformationEnabled is set to disabled(2), the object will always return 0.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.3 |
hpnicfMACInformationRemovedMACNumThe number of MAC addresses that removed by the device since the hpnicfMACInformationEnabled is set to enabled(1) and hpnicfMACRemovedEnable is set to enabled(1) at least on one interface. If the hpnicfMACInformationEnabled is set to disabled(2), the object will always return 0.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.4 |
hpnicfMACInformationTrapSendNumThe number of traps that have been generated. This object is valid only when the hpnicfMACInfomationWorkMode is set to trap(1). If the hpnicfMACInfomationWorkMode is set to syslog(2), the object will always return 0.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.5 |
hpnicfMACInformationSyslogSendNumThe number of syslogs that have been generated. This object is valid only when the hpnicfMACInfomationWorkMode is set to syslog(2). If the hpnicfMACInfomationWorkMode is set to trap(1), the object will always return 0.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.6 |
hpnicfMACInformationCacheLenThe maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as soon as there is a MAC address learnt or removed.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.7 |
hpnicfMACInfomationWorkModeThe working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all properties of trap interrelated is valid. If the object is set to syslog(2), the device will use syslog mode to notify the MAC address information and all properties of trap interrelated is invalid.rw HpnicfMACInfoWorkMode .1.3.6.1.4.1.11.2.14.11.15.2.87.1.1.8 |
hpnicfMACInformationMIBTableTroop OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.2 |
hpnicfMACInfomationIfTableThe table is used to enable or disable the MAC Information feature on interfaces. SEQUENCE OF HpnicfMACInfomationIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1 |
hpnicfMACInfomationIfEntryThe entry of hpnicfMACInfomationIfTable. HpnicfMACInfomationIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1.1 |
hpnicfMACLearntEnableIf the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1.1.1 |
hpnicfMACRemovedEnableIf the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.87.1.2.1.1.2 |
hpnicfMACInformationMibTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3 |
hpnicfMACInformationTraps OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.0 |
hpnicfMACInformationChangedTrapWhen the cached number of MAC address information is reached the value specified by hpnicfMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by hpnicfMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when hpnicfMACInfomationWorkMode is set to trap(1). When the hpnicfMACInfomationWorkMode is set to syslog(2), No trap will be generated even hpnicfMACInformationEnabled is set to enabled(1) and the feature is enabled on interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.0.1 |
hpnicfMACInformationTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2 |
hpnicfMACInfoTrapIndexThe sequence number of trap information. When it reaches the maximum value, it should be set to 1.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2.1 |
hpnicfMACInfoTrapCountThe cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2.2 |
hpnicfMACInfoTrapMsgThis object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 12 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - Reserved <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 2 octets.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.87.1.3.2.3 |
hpnicfMACInformationMibTrapExt OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4 |
hpnicfMACInformationTrapsExt OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.0 |
hpnicfMACInformationChangedTrapExtWhen the cached number of MAC address information is reached the value specified by hpnicfMACInformationCacheLen, trap is generated and is sent to the remote monitoring device. The trap is also generated when the amount of time elapsed since the previous notification is greater than the interval value specified by hpnicfMACInformationcSendInterval and there is at least one cached MAC address information learnt or removed. The object is valid only when hpnicfMACInfomationWorkMode is set to trap(1). When the hpnicfMACInfomationWorkMode is set to syslog(2), No trap will be generated even hpnicfMACInformationEnabled is set to enabled(1) and the feature is enabled on interface. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.0.1 |
hpnicfMACInformationMovedTrapWhen the MAC address has been moved to another interface, trap is generated and is sent to the remote monitoring device. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.0.2 |
hpnicfMACInformationTrapObjectsExt OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2 |
hpnicfMACInfoTrapVerExtThe version of trap information.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.1 |
hpnicfMACInfoTrapIndexExtThe sequence number of trap information. When it reaches the maximum value, it should be set to 1.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.2 |
hpnicfMACInfoTrapCountExtThe cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address information in one trap is called cell.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.3 |
hpnicfMACInfoTrapMsgExtThis object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object is in the format of '<cell1><cell2>...'. Each cell consists of 14 octets in the format of '<operationType><VLAN><MAC><MACtype><ifIndex>'. <operationType> is the reason type of MAC address changed and have size of 1 octet. It only supports the following values. 1 - MAC learnt. 2 - MAC removed. <VLAN> is the vlan number that correspond to the MAC address in MAC address table and has size of 2 octet. <MAC> is the MAC address and has size of 6 octets. <MACtype> is the MAC address type and has size of 1 octet. It only supports the following values. 0 - Unknown 1 - Learnt 2 - Config dynamic 3 - Config static 4 - Blackhole 5 - Security 6 - 802.1x 7 - MAC authentication 8 - Voice VLAN 9 - Reserved <ifIndex> is the index of the interface where the MAC address is learnt or removed and has size of 4 octets.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.4 |
hpnicfMACInfoTrapMsgMovedAddressThe MAC address that is moved between interfaces.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.5 |
hpnicfMACInfoTrapMsgMovedVlanThe VLAN number in which the MAC address is moved.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.6 |
hpnicfMACInfoTrapMsgMovedFromIfThe index of the interface from which the MAC address is moved.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.7 |
hpnicfMACInfoTrapMsgMovedToIfThe index of the interface to which the MAC address is moved.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.8 |
hpnicfMACInfoTrapMsgMovedCountThe times for which the MAC address has been moved between the interfaces.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.87.1.4.2.9 |