HPN-ICF-FCOE-MODE-MIB
AI MIB Summary
The HPN-ICF-FCOE-MODE-MIB module enables the configuration and real-time monitoring of the operational working mode for Fibre Channel over Ethernet (FCoE) interfaces on HP networking hardware. It specifically tracks the active FCoE state transitions and mode settings required to maintain storage traffic integrity over Ethernet infrastructure.
This MIB module is for configuring and monitoring the working mode of FCoE (Fibre Channel over Ethernet) features.
Main OID:
hpnicfFcoeMode.1.3.6.1.4.1.11.2.14.11.15.2.135
4
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
4 total| Object Name |
|---|
hpnicfFcoeModeThis MIB module is for configuring and monitoring the working mode of FCoE (Fibre Channel over Ethernet) features. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.135 |
hpnicfFcoeModeMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.135.1 |
hpnicfFcoeModeCfgModeThis object specifies the FCoE modes the switch supports. The object has four available values: 1: non-FCoE mode. 2: FCF mode. 3: NPV mode. 4: Transit mode. The switch mode can only be converted from non-FCoE mode to one of FCoE modes, or vice versa, but cannot be converted directly among the other three FCoE modes. To convert among the other three FCoE modes, the switch should first be converted to non-FCoE mode. After converting the switch to non-FCoE mode, FCoE-related configurations in the original FCoE mode will be cleared.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.135.1.1 |
hpnicfFcoeModeCfgLastResultThis object specifies the result of the latest FCoE mode configuration. The object has four values: success - Configured successfully. noLicence - Configured unsuccessfully for lack of licence. needReset - Configured unsuccessfully, because the desired mode is not non-FCoE mode, and the mode should be first set to non-FCoE mode. unknownFault - Configured unsuccessfully for unknown fault.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.135.1.2 |