HPN-ICF-DOT11S-MESH-MIB
The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs.
Main OID:
hpnicfDot11sMesh.1.3.6.1.4.1.11.2.14.11.15.2.75.11
88
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
88 total| Object Name |
|---|
hpnicfDot11sMeshThe file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.75.11 |
hpnicfDot11sConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1 |
hpnicfDot11sMeshGlobalPara OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1 |
hpnicfDot11sMeshMkdIDThis object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.1.1 |
hpnicfDot11sMeshPflTableThis table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except hpnicfDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio. SEQUENCE OF HpnicfDot11sMeshPflEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2 |
hpnicfDot11sMeshPflEntryEach entry contains information of a mesh profile. HpnicfDot11sMeshPflEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1 |
hpnicfDot11sMeshPflIndexThis object represents the index of the mesh profile. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.1 |
hpnicfDot11sMeshPflMeshIDThis object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, hpnicfDot11sMeshPflEnable can not be set to 'true'.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.2 |
hpnicfDot11sMeshPflBindIntNumThis object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of hpnicfDot11sMeshPflEnable can not be set to 'true'.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.3 |
hpnicfDot11sMeshPflKeepAliveThis object represents the mesh link keep-alive interval.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.4 |
hpnicfDot11sMeshPflBackhaulRateThis object represents the link backhaul rate.rw Integer32 UNITS "Kbps" .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.5 |
hpnicfDot11sMeshMkdServEnableThis object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.6 |
hpnicfDot11sMeshPflEnableThis object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.7 |
hpnicfDot11sMeshPflRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.2.1.8 |
hpnicfDot11sMpPlcyTableThis table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio. SEQUENCE OF HpnicfDot11sMpPlcyEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3 |
hpnicfDot11sMpPlcyEntryEach entry contains information of a MP policy. HpnicfDot11sMpPlcyEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1 |
hpnicfDot11sMpPlcyIndexThis object represents the MP policy index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.1 |
hpnicfDot11sMpPlcyNameThis object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.2 |
hpnicfDot11sMpPlcyInitEnableThis object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.3 |
hpnicfDot11sMlspEnableThis object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.4 |
hpnicfDot11sProbReqIntervalThis object represents the probe request interval.rw Integer32 UNITS "millisecond" .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.5 |
hpnicfDot11sRoleAuthEnableThis object indicates whether the device can play as the role of an authenticator.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.6 |
hpnicfDot11sLinkHoldRSSIThis object represents the link-hold receive signal strength indicator (RSSI).rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.7 |
hpnicfDot11sLinkHoldTimeThis object represents the link-hold time.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.8 |
hpnicfDot11sSwitchMarginThis object represents the link-switch margin.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.9 |
hpnicfDot11sLinkSaturationRSSIThis object represents the link saturation receive signal strength indicator (RSSI).rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.10 |
hpnicfDot11sLinkRateModeThis object represents the rate mode of the mesh link.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.11 |
hpnicfDot11sMaxLinkNumThis object represents the maximum number of the mesh link.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.12 |
hpnicfDot11sMpPlcyRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.3.1.13 |
hpnicfDot11sMlspCfgTableThis table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified. SEQUENCE OF HpnicfDot11sMlspCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4 |
hpnicfDot11sMlspCfgEntryEach entry contains information of MLSP proxy MAC address. HpnicfDot11sMlspCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1 |
hpnicfDot11sMlspProxyIndexThis object represents the MLSP proxy MAC address index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.1 |
hpnicfDot11sMlspProxyMacThis object represents the MLSP proxy MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.2 |
hpnicfDot11sMlspRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.4.1.3 |
hpnicfDot11sRadioCfgTableThis table is used to configure mesh to the specified radio. SEQUENCE OF HpnicfDot11sRadioCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5 |
hpnicfDot11sRadioCfgEntryEach entry contains mesh configure information of the specified radio. HpnicfDot11sRadioCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1 |
hpnicfDot11sCfgRadioIndexRepresents index of the radio. HpnicfDot11RadioElementIndex (HPN-ICF-DOT11-REF-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.1 |
hpnicfDot11sMeshPflMapThis object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.2 |
hpnicfDot11sMpPlcyMapThis object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.5.1.3 |
hpnicfDot11sAPCfgTableThis table is used to configure mesh to the specified AP. SEQUENCE OF HpnicfDot11sAPCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6 |
hpnicfDot11sAPCfgEntryEach entry contains mesh configure information of the specified AP. HpnicfDot11sAPCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1 |
hpnicfDot11sPortalEnableThis object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.1.6.1.1 |
hpnicfDot11sWDSConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.11.2 |
hpnicfDot11sWDSPeerMacTableThis table is used to configure wireless distribution system (WDS). The row of this table can not be modified. SEQUENCE OF HpnicfDot11sWDSPeerMacEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1 |
hpnicfDot11sWDSPeerMacEntryEach entry contains information of WDS. HpnicfDot11sWDSPeerMacEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1 |
hpnicfDot11sWDSPeerMacIndexThis object represents the peer MAC address index. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.1 |
hpnicfDot11sWDSPeerMacAddrssThis object represents the peer MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.2 |
hpnicfDot11sWDSPeerMacRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.2.1.1.3 |
hpnicfDot11sMeshStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3 |
hpnicfDot11sMeshLinkStatusTableThis table is used to represent the status of mesh link. SEQUENCE OF HpnicfDot11sMeshLinkStatusEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1 |
hpnicfDot11sMeshLinkStatusEntryEach entry contains status information of mesh link. HpnicfDot11sMeshLinkStatusEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1 |
hpnicfDot11sMeshLinkIfIndexThis object represents the interface index of the mesh link. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.1 |
hpnicfDot11sMeshLinkNameThis object represents the name of the mesh link.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.2 |
hpnicfDot11sMeshLinkBSSIDThis object represents the BSS ID of the mesh link.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.3 |
hpnicfDot11sMeshLinkPeerMacThis object represents the peer MAC address of the mesh link.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.4 |
hpnicfDot11sMeshLinkExistDurationThis object represents the time for which the link has been up.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.5 |
hpnicfDot11sMeshLinkTypeThis object represents the type for the link.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.1.1.6 |
hpnicfDot11sMeshLinkStatisTableThis table is used to represent the statistical information of mesh link. SEQUENCE OF HpnicfDot11sMeshLinkStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2 |
hpnicfDot11sMeshLinkStatisEntryEach entry contains statistical information of mesh link. HpnicfDot11sMeshLinkStatisEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1 |
hpnicfDot11sMeshLinkStatIfIndexThis object represents the interface index of the mesh link. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.1 |
hpnicfDot11sMeshLinkNbrIndexRepresents the neighbor index of the mesh link.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.2 |
hpnicfDot11sMeshLinkRxTotByteRepresents the amount of bytes that the mesh link received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.3 |
hpnicfDot11sMeshLinkRxTotPktRepresents the amount of packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.4 |
hpnicfDot11sMeshLinkRxUniPktRepresents the amount of unicast packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.5 |
hpnicfDot11sMeshLinkRxBrocPktRepresents the amount of broadcast packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.6 |
hpnicfDot11sMeshLinkRxMuticPktRepresents the amount of multicast packets that the mesh link received.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.7 |
hpnicfDot11sMeshLinkRxDiscPktRepresents the amount of packets that the mesh link discarded.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.8 |
hpnicfDot11sMeshLinkTxTotByteRepresents the total amount of bytes that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.9 |
hpnicfDot11sMeshLinkTxTotPktRepresents the total amount of packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.10 |
hpnicfDot11sMeshLinkTxUniPktRepresents the amount of unicast packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.11 |
hpnicfDot11sMeshLinkTxBrocPktRepresents the amount of broadcast packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.12 |
hpnicfDot11sMeshLinkTxMuticPktRepresents the amount of multicast packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.13 |
hpnicfDot11sMeshLinkTxDiscPktRepresents the amount of discarded packets that the mesh link transmitted.ro Counter32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.14 |
hpnicfDot11sMeshLinkIFNameRepresents the name of mesh link interface.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.2.1.15 |
hpnicfDot11sMeshNbrStatusTableThis table represents the status information for the neighbors of MP. SEQUENCE OF HpnicfDot11sMeshNbrStatusEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3 |
hpnicfDot11sMeshNbrStatusEntryEach entry of the table will provide status information for the neighbors of MP. HpnicfDot11sMeshNbrStatusEntry .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1 |
hpnicfDot11sMeshNbrIndexRepresents the index for the neighbor. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.1 |
hpnicfDot11sMeshNbrRadioIDRepresents the radio ID of the neighbor.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.2 |
hpnicfDot11sMeshLocalMeshIDRepresents the local mesh ID.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.3 |
hpnicfDot11sMeshNbrMeshIDRepresents the mesh ID of the neighbor.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.4 |
hpnicfDot11sMeshNbrBSSIDRepresents the BSS ID of the neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.5 |
hpnicfDot11sMeshNbrPeerMacRepresents the MAC address of the peer neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.6 |
hpnicfDot11sMeshLinkInMpRepresents the interface index of mesh link that used to connect with this neighbor.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.7 |
hpnicfDot11sMeshMPLinkStatusRepresents the status of mesh link that used to connect with this neighbor.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.8 |
hpnicfDot11sMeshNbrChannelRepresents the channel number used by this neighbor.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.9 |
hpnicfDot11sMeshNbrLinkDurationRepresents the duration of mesh link that used to connect with this neighbor.ro Integer32 UNITS "second" .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.10 |
hpnicfDot11sMeshNbrRSSIRepresents the RSSI of mesh link that used to connect with this neighbor.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.11 |
hpnicfDot11sMeshNbrSNRRepresents the SNR of mesh link that used to connect with this neighbor.ro Integer32 UNITS "percent" .1.3.6.1.4.1.11.2.14.11.15.2.75.11.3.3.1.12 |