HPN-ICF-MPLSOAM-PS-MIB
AI MIB Summary
The HPN-ICF-MPLSOAM-PS-MIB enables SNMP management of MPLS OAM (Operations, Administration, and Maintenance) protect-switch configurations on Hewlett Packard Networking devices, specifically monitoring and controlling the state and parameters of MPLS protection switching modules.
This MIB contains objects to configure mpls protect-switch module.
Main OID:
hpnicfMplsOamPs.1.3.6.1.4.1.11.2.14.11.15.2.80
23
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
hpnicfMplsOamPsThis MIB contains objects to configure mpls protect-switch module. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.80 |
hpnicfMplsOamPsScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.80.1 |
hpnicfMplsOamPsTrapOpenWhether mpls protect-switch trap is globally enabled. false: disable; true: enablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.80.1.1 |
hpnicfMplsOamPsTable OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.80.2 |
hpnicfMplsPsTableThis table specifies per-protection-group MPLS PS capability and associated information. SEQUENCE OF HpnicfMplsPsEntry .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1 |
hpnicfMplsPsEntryAn entry in this table is created by an LSR for every protection group capable of supporting mpls ps. HpnicfMplsPsEntry .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1 |
hpnicfMplsPsIndexThis is a unique index for an entry in the mplspsEntry. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.1 |
hpnicfMplsPsGroupIDThis is a unique group id for an entry in the mplspsEntry. One protect-switch group is composed of one working static-lsp and one protection static-lsp.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.2 |
hpnicfMplsPsWorkLspNameThe name of the working static-lsp.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.3 |
hpnicfMplsPsProtectLspNameThe name of the protection static-lsp.rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.4 |
hpnicfMplsPsRevertiveModeRevertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired. And switching does not occur in a non-revertive mode. 1: revertive; 2: non-revertive;rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.5 |
hpnicfMplsPsWTRWait to Restore timer is only applicable for the revertive mode and applies to a working LSP, it prevents reversion back to select the working LSP until the Wait to Restore timer has expired. The default value is 12 minutes. step is 30s.rw Integer32 UNITS "30s" .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.6 |
hpnicfMplsPsHoldOffThe time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm. Step is 100ms, maximum is 10s.rw Integer32 UNITS "100ms" .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.7 |
hpnicfMplsPsSwitchConditionThe current switch condition of the protection group. 1: clear, this command clears all of the externally initiated switch commands listed below; 2: lockout of protection, fix the selector position on the working LSP, Prevents the selector from switching to the protection LSP when it is selecting the working LSP. Switches the selector from the protection to the working LSP when it is selecting the protection LSP; 3: forced protection, switches the selector from the working LSP to the protection LSP (unless a higher priority switch request (i.e., LoP) is in effect); 4: signal fail, for 1:1, Signal Fail (SF) is declared when the source of the protection domain enters the Defect State by receiving a BDI packet (from the return LSP or out of band). 5: manual switch for working-lsp, switches the selector from the working LSP to the protection LSP (unless an equal or higher priority switch request (i.e., LoP, FS, SF or MS) is in effect); 6: manual switch for protection-lsp, switches the selector from the protection LSP to the working LSP (unless an equal or higher priority switch request (i.e., LoP, FS, SF or MS) is in effect). 7: WTR-timer, a configurable timer which is used to delay before reversion; 8: HoldOff-timer, the time between declaration of signal degrade or signal fail, and the initialization of the protection switching algorithm; 9: Others; The pripority of the commands are: clear > lockout of protection > force switch > manual switch for working lsp = manual switch for protection lsprw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.8 |
hpnicfMplsPsWorkLspDetectStateThe state of working static-lsp state in one protection group, whether it is in defect: 1: it is out of defect; 2: it enters defect.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.9 |
hpnicfMplsPsWorkLspUpDownStateThe state of working static-lsp state in one protection group, whether it is up or down: 1: it is in up state; 2: it is in down state.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.10 |
hpnicfMplsPsProtLspDetectStateThe state of protection static-lsp state in one protection group, whether it is in detection: 1: it is out of defect; 2: it enters defect.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.11 |
hpnicfMplsPsProtLspUpDownStateThe state of protection static-lsp state in one protection group, whether it is up or down: 1: it is in up state; 2: it is in down state.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.12 |
hpnicfMplsPsSwitchResultWhich tunnel is used to transfer the data stream. 1: working static-lsp; 2: protection static-lsp.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.13 |
hpnicfMplsPsRowStatusThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsPsGroupID, hpnicfMplsPsWorkLspName, hpnicfMplsPsProtectLspName, hpnicfMplsPsRevertiveMode, hpnicfMplsPsWTR and hpnicfMplsPsHoldOff must be specified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.14 |
hpnicfMplsOamPsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.80.3 |
hpnicfMplsPsSwitchPtoWThis notification is generated when switching from protection-lsp to working-lsp occured. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.80.3.1 |
hpnicfMplsPsSwitchWtoPThis notification is generated when switching from woking-lsp to protection-lsp occured. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.80.3.2 |