HPN-ICF-IF-EXT-MIB
This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detailed information.
Main OID:
hpnicfIfExt.1.3.6.1.4.1.11.2.14.11.15.2.40
81
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
81 total| Object Name |
|---|
hpnicfIfExtThis MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detailed information. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.40 |
hpnicfIfExtScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.1 |
hpnicfIfStatGlobalFlowIntervalSampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.40.1.1 |
hpnicfIfShutDownIntervalSet the port status detection timer. The device starts a port status detection timer when a port is shut down by a protocol. Once the timer expires, the device brings up the port so the port status reflects the port's physical status.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.40.1.2 |
hpnicfIfExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.2 |
hpnicfIfStat OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1 |
hpnicfIfStatScalarGroup OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.1 |
hpnicfIfStatTable OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2 |
hpnicfIfFlowStatTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF HpnicfIfFlowStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1 |
hpnicfIfFlowStatEntryEntry items HpnicfIfFlowStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1 |
hpnicfIfStatFlowIntervalSampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.1 |
hpnicfIfStatFlowInBitsIn bits in the specific interval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.2 |
hpnicfIfStatFlowOutBitsOut bits in specific interval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.3 |
hpnicfIfStatFlowInPktsIn Packets in the specific interval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.4 |
hpnicfIfStatFlowOutPktsOut packets in the specific interval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.5 |
hpnicfIfStatFlowInBytesIn bytes in the specific interval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.6 |
hpnicfIfStatFlowOutBytesOut bytes in the specific interval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.1.1.7 |
hpnicfIfSpeedStatTableThis table contains objects to get average speed information in the specific interval of interfaces on a device. SEQUENCE OF HpnicfIfSpeedStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2 |
hpnicfIfSpeedStatEntryEntry items HpnicfIfSpeedStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1 |
hpnicfIfSpeedStatIntervalSampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.1 |
hpnicfIfSpeedStatInPktsAverage of input packets per second in the specific interval by hpnicfIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.2 |
hpnicfIfSpeedStatOutPktsAverage of output packets per second in the specific interval by hpnicfIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.3 |
hpnicfIfSpeedStatInBytesAverage of input bytes per second in the specific interval by hpnicfIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.4 |
hpnicfIfSpeedStatOutBytesAverage of output bytes per second in the specific interval by hpnicfIfSpeedStatInterval.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.2.1.5 |
hpnicfIfHCFlowStatTableThis table contains objects to get statistic information of interfaces on a device. SEQUENCE OF HpnicfIfHCFlowStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3 |
hpnicfIfHCFlowStatEntryEntry items HpnicfIfHCFlowStatEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1 |
hpnicfIfStatFlowHCInBitsIn bits in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBits.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.1 |
hpnicfIfStatFlowHCOutBitsOut bits in specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBits.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.2 |
hpnicfIfStatFlowHCInPktsIn Packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInPkts.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.3 |
hpnicfIfStatFlowHCOutPktsOut packets in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutPkts.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.4 |
hpnicfIfStatFlowHCInBytesIn bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowInBytes.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.5 |
hpnicfIfStatFlowHCOutBytesOut bytes in the specific interval. This object is a 64-bit version of hpnicfIfStatFlowOutBytes.ro CounterBasedGauge64 (HCNUM-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.1.2.3.1.6 |
hpnicfIfControl OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2 |
hpnicfRTParentIfTableThis table contains all interfaces that can create sub interface. SEQUENCE OF HpnicfRTParentIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1 |
hpnicfRTParentIfEntryThis entry describes a interface that can create sub interface. HpnicfRTParentIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1 |
hpnicfRTParentIfIndexThe index of interface that can creat sub interface. The value is the same as ifIndex value for this interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.1 |
hpnicfRTMinSubIfOrdinalThe minimum ordinal of the sub interface can be created.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.2 |
hpnicfRTMaxSubIfOrdinalThe max ordinal of the sub interface can be created.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.1.1.3 |
hpnicfRTSubIfTableThis table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hpnicfRTSubIfParentIfIndex and the hpnicfRTSubIfOrdinal must be in the range between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface from hpnicfRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP. SEQUENCE OF HpnicfRTSubIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2 |
hpnicfRTSubIfEntryThe hpnicfRTSubIfTable entry items HpnicfRTSubIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1 |
hpnicfRTSubIfParentIfIndexThe parent interface index. The value should be the same as the hpnicfRTParentIfIndex. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.1 |
hpnicfRTSubIfOrdinalThe ordinal of sub interface. It should between hpnicfRTMinSubIfOrdinal and hpnicfRTMaxSubIfOrdinal of the parent interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.2 |
hpnicfRTSubIfSubIfIndexThe ifIndex value of the sub interfacero Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.3 |
hpnicfRTSubIfSubIfDescThe name of the interfacero DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.4 |
hpnicfRTSubIfRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.2.1.5 |
hpnicfIfLinkModeTableThis table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode. SEQUENCE OF HpnicfIfLinkModeEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3 |
hpnicfIfLinkModeEntryThe interface link mode table entry HpnicfIfLinkModeEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1 |
hpnicfIfLinkModeIndexThe value is same as ifIndex. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.1 |
hpnicfIfLinkModeThe current link mode of the interface If hpnicfIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.2 |
hpnicfIfLinkModeSwitchSupportWhether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.2.3.1.3 |
hpnicfIfInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3 |
hpnicfIfPhysicalNumberRepresents the number of physical interfaces in the device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.1 |
hpnicfIfTableA list of interface entries. The number of entries is given by the value of IfNumber. SEQUENCE OF HpnicfIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2 |
hpnicfIfEntryAn entry containing management information applicable to a particular interface. HpnicfIfEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1 |
hpnicfIfUpDownTimesThe interface's up/down times, since the device was initialized.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.1 |
hpnicfIfMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.2 |
hpnicfIfBandwidthRateThe rate of the bandwidth for an interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.3 |
hpnicfIfDiscardPktRateThe rate of the discarded packets for an interface.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.4 |
hpnicfIfStatusKeepTimeThe time since the interface entered its current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.5 |
hpnicfIfInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.6 |
hpnicfIfOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.7 |
hpnicfIfIsPoeWhether the interface supports poe.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.8 |
hpnicfIfOperStatusCurrent status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hpnicfIfOperStatus should be admindown. If ifAdminStatus is changed to up, hpnicfIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.9 |
hpnicfIfDownTimesNumber of times the interface went down, since the device was initialized.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.2.1.10 |
hpnicfIfUsingTableA table containing management information applicable to splitting interfaces. To improve port density, reduce costs, and improve network flexibility, a high-bandwidth interface can be split into multiple low-bandwidth breakout interfaces, and the breakout interfaces can be combined into a higher-bandwidth interface. For example, a 40-GE interface can be split into four 10-GE breakout interfaces. After the operation takes effect on a 40-GE interface, the system deletes the 40-GE interface and creates four 10-GE breakout interfaces. SEQUENCE OF HpnicfIfUsingEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3 |
hpnicfIfUsingEntryAn entry of hpnicfIfUsingTable. HpnicfIfUsingEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1 |
hpnicfIfUsingIndexIndex of an interface which can be split into multiple low-bandwidth breakout interfaces or be restored to a high-bandwidth interface. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.1 |
hpnicfIfUsingSupportTypeThis object specifies the port type which can be split into or restored to. From lowest bit, each bit corresponds to a port type ('10GE', '20GE', '40GE', '100GE'). For example, value 3 means this object can be split into 10GE or 20GE, value 4 means this object can be split into 40GE, or can be restored to 40GE.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.2 |
hpnicfIfUsingTypeThis object specifies the port type that can be split into or restored to. After this object is set to a none-zero value, the operation returns success in the following cases: 1. The original instance stills exist and is read as a non-zero value. In this case, object hpnicfIfUsingStatus change to needReboot(1), which means that you need to reboot the line card (for distributed devices) or device (for centralized devices) where the port is located to make the operation take effect. Set this object to noUsing(0) for cancelling the operation. 2. The operation takes effect immediately. Original instance is deleted and new instance is created while the operation takes effect.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.3 |
hpnicfIfUsingStatusAfter object hpnicfIfUsingType is set to a none-zero value, if the operation does not takes effect before reboot the line card (for distributed devices) or device (for centralized devices) where the port is located, the value of this object is needReboot(1).ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.40.2.3.3.1.4 |
hpnicfIfExtTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.3 |
hpnicfIfExtTrapPrex OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.3.0 |
hpnicfIfBandwidthUsageHighThe notification is generated when the rate of the bandwidth for the interface exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.1 |
hpnicfIfDiscardPktRateHighThe notification is generated when the rate of the discarded packets for the interface exceeds the upper limit. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.2 |
hpnicfIfDampeningSuppressedThe notification is generated when the interface is suppressed via dampening. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.3 |
hpnicfIfDampeningNotSuppressedThe notification is generated when the interface is resumed to not suppressed via dampening. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.40.3.0.4 |
hpnicfIfExtTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.40.3.1 |
hpnicfIfExtTrapCfgTableThe trap configuration table. SEQUENCE OF HpnicfIfExtTrapCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1 |
hpnicfIfExtTrapCfgEntryAn entry for this table. HpnicfIfExtTrapCfgEntry .1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1 |
hpnicfIfBandwidthUpperLimitThe rate of the bandwidth upper limit for an interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.1 |
hpnicfIfDiscardPktRateUpperLimitThe rate of the discarded packets upper limit for an interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.40.3.1.1.1.2 |