HPN-ICF-EOC-COMMON-MIB
The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.
Main OID:
hpnicfEOCCommon.1.3.6.1.4.1.11.2.14.11.15.2.83
136
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
136 total| Object Name |
|---|
hpnicfEOCCommonThe objects in this MIB module are used to manage and
display common configuration between Ethernet Passive
Optical Network (EOC) port which are based on the Ethernet
in the First Mile (EFM) Passive Optical Network(PON) as
defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
and Ethernet Over Cable (EOC) which is based on HomePlug
AV Specification. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.83 |
hpnicfEOCCommonSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.1 |
hpnicfEOCCommonSysScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.1.1 |
hpnicfEOCCommonSysVersionEoc version. If the object length is
zero, it means the version is unknown.
The length is up to 1024.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.83.1.1.1 |
hpnicfEOCCommonUpLinkMacAddressEOC CLT's uplink device's mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.1.1.2 |
hpnicfEOCCommonCltMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.2 |
hpnicfEOCCommonCltManTableThis table defines the primary parameters of the
CLT configuration. SEQUENCE OF HpnicfEOCCommonCltManEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.2.1 |
hpnicfEOCCommonCltManEntryThe entry of the table hpnicfEOCCommonCltManTable. HpnicfEOCCommonCltManEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1 |
hpnicfEOCCommonCltAutoAuthorizeThis value determines whether software performs
self-authorization for each Cable Network Unit(CNU)
registering to the network. Setting it to false
means for every CNU registering, software requires
external authorization, and until it's done the
CNU is not authenticated. True value means software
authorizes each CNU registering to the network
automatically.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1.1 |
hpnicfEOCCommonCltMaxAllowToAccessThis value determines how many CNU can be bound
in this CLT. If the number of CNU is more than this
value , then the rest of CNU should not be allow to
access.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1.2 |
hpnicfEOCComCnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.3 |
hpnicfEOCComCnuScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1 |
hpnicfEOCComCnuMaxDownBWMinValThe lower limit of total-bandwidth which is confined to
hpnicfEOCComCnuMaxDownBW.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.1 |
hpnicfEOCComCnuMaxDownBWMaxValThe upper limit of total-bandwidth which is confined to
hpnicfEOCComCnuMaxDownBW.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.2 |
hpnicfEOCComCnuSlaHighPriBWMinValThe lower limit of high priority bandwidth which is confined to
hpnicfEOCComCnuSlaHighPriBW.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.3 |
hpnicfEOCComCnuSlaHighPriBWMaxValThe upper limit of high priority bandwidth which is confined to
hpnicfEOCComCnuSlaHighPriBW.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.4 |
hpnicfEOCComCnuMaxUpBWMinValThe lower limit of total-bandwidth which is confined to
hpnicfEOCComCnuMaxUpBW.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.5 |
hpnicfEOCComCnuMaxUpBWMaxValThe upper limit of total-bandwidth which is confined to
hpnicfEOCComCnuMaxUpBW.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.6 |
hpnicfEOCComCnuAttenThrAThe value of cnu's average attenuation good level thresholds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.7 |
hpnicfEOCComCnuAttenThrBThe value of cnu's average attenuation normal level thresholds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.8 |
hpnicfEOCComCnuRateDropThrThe value of cnu's Tx/Rx rate drop thresholds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.9 |
hpnicfEOCComCnuSysManTableThis table implements the management of CNUs(Coax Network Unit). SEQUENCE OF HpnicfEOCComCnuSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2 |
hpnicfEOCComCnuSysManEntryThe entry of the table hpnicfEOCComCnuSysManTable. HpnicfEOCComCnuSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1 |
hpnicfEOCComCnuCableIfindexThe index of cable port which uniquely identifies the cable
port of one device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.1 |
hpnicfEOCComCnuDeviceTypeThe type of the EOC CNU(Coax Network Unit).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.2 |
hpnicfEOCComCnuDeviceAliasEOC CNU's alias which display as the device's name,
it's recommended to set it uniquely and understandably.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.3 |
hpnicfEOCComCnuDescrUser's description, including user's address,
name, telephone number and so on.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.4 |
hpnicfEOCComCnuUpTimeThe time since the CNU last registered to the network.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.5 |
hpnicfEOCComCnuVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.6 |
hpnicfEOCComCnuPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on cable interface.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.7 |
hpnicfEOCComCnuVlanTagVLAN is set tagged or untagged on cable interface.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.8 |
hpnicfEOCComCnuResetThis variable is used to reset the CNU device. The
interface may be unavailable while the reset occurs and
data may be lost. During reading operation it returns
the state of the CNU device. running(1) indicates and
operates normal operation, reset(2) indicates and
operates reset mode. Writing can be done all the time.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.9 |
hpnicfEOCComCnuDeregisterderegister CNU.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.10 |
hpnicfEOCComCnuSaveSave the UNI and CNU related configurations to
the CNU.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.11 |
hpnicfEOCComCnuAccessControl whether the user can access to the network.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.12 |
hpnicfEOCComCnuMacTableThis table implements the management of CNUs. SEQUENCE OF HpnicfEOCComCnuMacEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.3 |
hpnicfEOCComCnuMacEntryThe entry of the table hpnicfEOCComCnuMacTable. HpnicfEOCComCnuMacEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1 |
hpnicfEOCComCnuMacAddressEOC CNU's MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.1 |
hpnicfEOCComCnuRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.2 |
hpnicfEOCComCnuTempIndexEOC CNU's model index from hpnicfHPEOCTemplateIndex,
If configure 0, the CNU select no model.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.3 |
hpnicfEOCComCnuInfoTablePrimary status of the specified CNU.
There will be one row in this table for each
information in the system. SEQUENCE OF HpnicfEOCComCnuInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4 |
hpnicfEOCComCnuInfoEntryThe entry of the hpnicfEOCComCnuInfoTable. HpnicfEOCComCnuInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1 |
hpnicfEOCComCnuHardwareVersionEOC CNU's hardware version. If the object length is
zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.1 |
hpnicfEOCComCnuPCBVersionEOC CNU's PCB version.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.2 |
hpnicfEOCComCnuLinkStateThe cable port's link state. The physicaldown(1) state indicates
that the CNU is not powered on. The linkdown(2) state indicates
that the CNU is powered on, but registers fail. The linkup(3)
state indicates that the CNU is powered on, and registers
successful. The loopback(4) state indecates that the CNU is
powered on and registers successful, but loopback has detected.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.3 |
hpnicfEOCComCnuAttenuationThe cnu's average attenuation.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.4 |
hpnicfEOCComCnuSoftwareVersionEOC CNU's software version. If the object length is
zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.5 |
hpnicfEOCComCnuTxRateThe cnu's capability of tx speed in unit of 1Mbps.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.6 |
hpnicfEOCComCnuRxRateThe cnu's capability of rx speed in unit of 1Mbps.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.7 |
hpnicfEOCComCnuTxRateDropThe cnu's capability droping of tx
speed from it's history max value in unit of %.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.8 |
hpnicfEOCComCnuRxRateDropThe cnu's capability droping of rx
speed from it's history max value in unit of %.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.9 |
hpnicfEOCComCnuBandWidthTableSet bandwidth parameters. SEQUENCE OF HpnicfEOCComCnuBandWidthEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.5 |
hpnicfEOCComCnuBandWidthEntryThe entry of table hpnicfEOCComCnuBandWidthTable.
It is a pre-configuration. HpnicfEOCComCnuBandWidthEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1 |
hpnicfEOCComCnuMaxDownBWMaximum bandwidth allowed for the CNU,
measured in Kbit/s.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.1 |
hpnicfEOCComCnuSlaHighPriBWHigh priority bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hpnicfEOCComCnuMaxUpBW.
The high priority bandwidth should not be larger than the maximum
bandwidth.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.2 |
hpnicfEOCComCnuMaxUpBWTotal bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hpnicfEOCComCnuSlaHighPriBW.
The total bandwidth should be larger than the high priority bandwidth.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.3 |
hpnicfEOCComUniMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.4 |
hpnicfEOCComUniManTableThis table defines several user network interface(UNI) system
parameters. SEQUENCE OF HpnicfEOCComUniManEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1 |
hpnicfEOCComUniManEntryThe entry of hpnicfEOCComUniManTable. HpnicfEOCComUniManEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1 |
hpnicfEOCUniIndexThe index value which uniquely identifies the FE(Fast Ethernet)
interface of the CNU. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.1 |
hpnicfEOCComUniDescrA textual string containing information about the interface. This
string should include the name of the manufacturer, the product
name and the version of the interface hardware and software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.2 |
hpnicfEOCComUniStatusThe desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down
state. The testing state indicates that no operational packets
can be passed. As a result of either explicit management action or
per configuration information retained by the managed system,
hpnicfEOCComUniStatus is then changed to either the up or
testing states (or remains in the down state).rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.3 |
hpnicfEOCComUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.4 |
hpnicfEOCComUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.5 |
hpnicfEOCComUniCurrentSpeedAn estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295). For a sub-layer which
has no concept of bandwidth, this object should be
zero.ro Gauge32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.6 |
hpnicfEOCComUniCurrentDuplexThe current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined.
Management control of the duplex mode is
accomplished through the MAU MIB. When
an interface does not support autonegotiation,
or when autonegotiation is not enabled, the
duplex mode is controlled using
ifMauDefaultType. When autonegotiation is
supported and enabled, duplex mode is controlled
using ifMauAutoNegAdvertisedBits. In either
case, the currently operating duplex mode is
reflected both in this object and in ifMauType.
Note that this object provides redundant
information with ifMauType. Normally, redundant
objects are discouraged. However, in this
instance, it allows a management application to
determine the duplex status of an interface
without having to know every possible value of
ifMauType. This was felt to be sufficiently
valuable to justify the redundancy.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7 |
hpnicfEOCComUniMdiType of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing).rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.8 |
hpnicfEOCComUniFlowControlFlow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.9 |
hpnicfEOCComUniCountResetReset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.10 |
hpnicfEOCComUniAliasThis object is an 'alias' name for the interface as
specified by a network manager, and provides a non-
volatile 'handle' for the interface.
On the first instantiation of an interface, the value
of hpnicfEOCComUniAlias associated with that interface is the
zero-length string. As and when a value is written
into an instance of hpnicfEOCComUniAlias through a network
management set operation, then the agent must retain
the supplied value in the hpnicfEOCComUniAlias instance associated
with the same interface for as long as that interface
remains instantiated, including across all re-
initializations/reboots of the network management
system, including those which result in a change of
the interface's ifIndex and hpnicfEOCUniIndex value.
An example of the value which a network manager might
store in this object for a WAN interface is the
(Telco's) circuit number/identifier of the interface.
Some agents may support write-access only for
interfaces having particular values of hpnicfEOCComUniType. An
agent which supports write access to this object is
required to keep the value in non-volatile storage,
but it may limit the length of new values depending on
how much storage is already occupied by the current
values for other interfaces.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.11 |
hpnicfEOCComUniTypeThe type of interface. Additional values for hpnicfEOCComUniType
are assigned by the Internet Assigned Numbers
Authority(IANA), through updating the syntax of the
IANAifType textual convention.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.12 |
hpnicfEOCComUniVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.13 |
hpnicfEOCComUniPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.14 |
hpnicfEOCComUniVlanTagVLAN is set tagged or untagged.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.15 |
hpnicfEOCComUniPriorityThe default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.16 |
hpnicfEOCComUniUpLineRateThe max speed upload in units of 1,000 bits per second
on this interface. The value should between 0 and 100Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.17 |
hpnicfEOCComUniDownLineRateThe max speed download in units of 1,000 bits per second
on this interface. The value should between 0 and 100Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.18 |
hpnicfEOCComUniAdminStatusControl if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.19 |
hpnicfEOCComUniCountTableA list of interface counter about frames entries. SEQUENCE OF HpnicfEOCComUniCountEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2 |
hpnicfEOCComUniCountEntryAn entry containing management information applicable
to a particular interface. HpnicfEOCComUniCountEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1 |
hpnicfEOCUniInPktsThe total number of packets (including bad packets,
broadcast packets, and multicast packets) received.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.1 |
hpnicfEOCUniInUPktsThe total number of good packets received that are
directed to the unicast address. Note that this
does not include multicast and broadcast packets.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.2 |
hpnicfEOCUniInBPktsThe total number of good packets received that are
directed to the broadcast address. Note that this
does not include multicast packets.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.3 |
hpnicfEOCUniInMPktsThe total number of good packets received that are
directed to a multicast address. Note that this number
does not include packets directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.4 |
hpnicfEOCUniInPausePktsA count of MAC Control packets received on this
interface by the pause(flow control) operation.
This counter does not increment when the
interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.5 |
hpnicfEOCUniInTotalErrorsTotal count of the error packets received on this interface.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.6 |
hpnicfEOCUniInCRCErrsThe total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.7 |
hpnicfEOCUniInUndersizePktsThe total number of packets received that are
less than 64 octets long (excluding framing bits,
but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.8 |
hpnicfEOCUniInOversizePktsThe total number of packets received that are
longer than 1518 octets (excluding framing bits,
but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.9 |
hpnicfEOCUniInErrorbyOtherThe total number of other error packets received on this interface.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.10 |
hpnicfEOCUniInOctetsThe total number of octets received on this interface.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.11 |
hpnicfEOCUniOutPktsThe total number of packets (including bad packets,
broadcast packets, and multicast packets) sent.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.12 |
hpnicfEOCUniOutUPktsThe total number of good packets sent that are
directed to the unicast address. Note that this
does not include multicast and broadcast packets.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.13 |
hpnicfEOCUniOutBPktsThe total number of good packets sent that are
directed to the broadcast address. Note that this
does not include multicast packets.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.14 |
hpnicfEOCUniOutMPktsThe total number of good packets sent that are
directed to a multicast address. Note that this number
does not include packets directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.15 |
hpnicfEOCUniOutPausePktsThe total number of MAC control packets sent on this
interface by the pause operation. This counter does
not increment when the interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.16 |
hpnicfEOCUniOutTotalErrorsThe total number of error packets sent on this interface.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.17 |
hpnicfEOCUniOutCollisionsThe best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
could. Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions. Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.18 |
hpnicfEOCUniOutDelayExceedDsdsThe number of packets discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source route bridges.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.19 |
hpnicfEOCUniOutErrorbyOtherThe total number of other error packets sent on this interface.
Other error packets means the error packets out of collision packets
and excessive delayed packets.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.20 |
hpnicfEOCUniOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.21 |
hpnicfEOCUniOutOctetsThe total number of octets transmitted out of the interface.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.22 |
hpnicfEOCCommonTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.5 |
hpnicfEOCTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0 |
hpnicfEOCCnuRegExcessTrapA hpnicfEOCCnuRegExcessTrap notification is sent when the
number of registered CNUs exceeds the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.1 |
hpnicfEOCCnuRegExcessRecoverTrapA hpnicfEOCCnuRegExcessRecoverTrap notification is sent when
hpnicfEOCCnuRegExcessTrap is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.2 |
hpnicfEOCCnuRegSuccTrapA hpnicfEOCCnuRegSuccTrap notification is sent when a
CNU registers successful. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.3 |
hpnicfEOCCnuOffLineTrapA hpnicfEOCCnuOffLineTrap notification is sent when a
CNU offline. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.4 |
hpnicfEOCCnuLinkupTrapA hpnicfEOCCnuLinkupTrap notification is sent when a
CNU linkup. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.5 |
hpnicfEOCOamDisconnectTrapA hpnicfEOCOamDisconnectionTrap notification is sent when
LLID's OAM link is disconnected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.6 |
hpnicfEOCOamDisconnectRecoverTrapA hpnicfEOCOamDisconnectionRecoverTrap notification is sent when
LLID's OAM link is disconnected and then connected. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.7 |
hpnicfEOCBandwidthNotEnoughTrapBandwidth is not enough, cnu can not bind now. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.8 |
hpnicfEOCCnuAttenuationTrapA hpnicfHPEOCCnuAttenuationTrap notification is sent when a
CNU's attenuation is changing. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.9 |
hpnicfEOCCnuRegFailTrapA hpnicfEOCCnuRegFailTrap notification is sent when a
CNU registers fail. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.10 |
hpnicfEOCCLTCablePortErrorTrapA hpnicfEOCCLTCablePortErrorTrap notification is sent when the
hardware of cable port occurs error or CLT's vlan is configged
error. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.11 |
hpnicfEOCCLTCablePortErrReTrapA hpnicfEOCCLTCablePortErrReTrap notification is sent when cable port
error and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.12 |
hpnicfEOCCnuTxRateDropTrapA hpnicfEOCCnuTxRateDropTrap notification is sent when cable port
rate of TX capability drop exceeded threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.13 |
hpnicfEOCCnuTxRateDropRecoverTrapA hpnicfEOCCnuTxRateDropRecoverTrap notification is sent when cable port
rate of TX capability recover from the recent rate-drop trap. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.14 |
hpnicfEOCCnuRxRateDropTrapA hpnicfEOCCnuRxRateDropTrap notification is sent when cable port
rate of RX capability drop exceeded threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.15 |
hpnicfEOCCnuRxRateDropRecoverTrapA hpnicfEOCCnuRxRateDropRecoverTrap notification is sent when cable port
rate of RX capability recover from the recent rate-drop trap. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.16 |
hpnicfEOCCnuFWDownLoadErrTrapA hpnicfEOCCnuFWDownLoadErrTrap notification is sent when CLT can't
download CNU firmware from the server successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.17 |
hpnicfEOCCnuFWDownLoadErrReTrapA hpnicfEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover
from the download CNU firmware error. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.18 |
hpnicfEOCCnuDeviceTypeErrTrapA hpnicfEOCCnuDeviceTypeErrTrap notification is sent when the online CNU
doesn't match the type which user defined earlier. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.19 |
hpnicfEOCCnuDeviceTypeErrReTrapA hpnicfEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU
doesn't match the type which user defined earlier and then recover. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.20 |
hpnicfEOCCnuAutoUpdateErrTrapA hpnicfEOCCnuAutoUpdateErrTrap notification is sent when the online CNU
doesn't auto update successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.21 |
hpnicfEOCCnuAutoUpdateSuccTrapA hpnicfEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU
auto update successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.22 |
hpnicfEOCLoopbackDetectTrapA hpnicfEOCLoopbackDetectTrap notification is sent when the loopback between
the ethernet ports of CNU or CLT is found. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.23 |
hpnicfEOCLoopbackRecoverTrapA hpnicfEOCLoopbackRecoverTrap notification is sent when the loopback between
the ethernet ports of CNU or CLT is recover. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.24 |
hpnicfEOCComOnLineCnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.83.6 |
hpnicfEOCComCnuTypeTableThis table defines the description of cnu typ. SEQUENCE OF HpnicfEOCComCnuTypeEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.6.1 |
hpnicfEOCComCnuTypeEntryThe entry of the table hpnicfEOCComCnuTypeTable. HpnicfEOCComCnuTypeEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1 |
hpnicfEOCComCnuTypeIdxA unique value for each cnu types. Its value
ranges between 1 and the value of cny typess. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1.1 |
hpnicfEOCComCnuDescriptonThe description for unique cnu types.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1.2 |
hpnicfEOCComCnuNumTableThis table defines the number of cnu registered in variable types
of the CLT . SEQUENCE OF HpnicfEOCComCnuNumEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.6.2 |
hpnicfEOCComCnuNumEntryThe entry of the table hpnicfEOCComCnuNumTable. HpnicfEOCComCnuNumEntry .1.3.6.1.4.1.11.2.14.11.15.2.83.6.2.1 |
hpnicfEOCComCnuNumberThe number of special type of cnu that has been registerd in clt.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.83.6.2.1.1 |