HPN-ICF-HPEOC-MIB
The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
Main OID:
hpnicfHPEOC.1.3.6.1.4.1.11.2.14.11.15.2.84
80
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
hpnicfHPEOCThe objects in this MIB module are used to manage and
display current configuration of Ethernet Over Cable
Network (EOC) which based on HomePlug(HP) AV Specification. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.2.84 |
hpnicfHPEOCSystem OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.84.1 |
hpnicfHPEOCCltVlanTypeControl EOC CLT's VLAN type,
ieee8021q : 802.1q VLAN mode,
portbased : portbased VLAN mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.1.1 |
hpnicfHPEOCCltVlanManTableThis table implements the management of CLT(Coax Line Terminal)
VLAN. SEQUENCE OF HpnicfHPEOCCltVlanManEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.2 |
hpnicfHPEOCCltVlanManEntryThe entry of the table hpnicfHPEOCCltVlanManTable. HpnicfHPEOCCltVlanManEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1 |
hpnicfHPEOCCltEthPortTypeControl CLT ethernet ports' type,
normal : port which used for normal translation,
debug : port which used for debug.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.1.2.1.1 |
hpnicfHPEOCCltSysManTableThis table implements the management of CLT(Coax Line Terminal). SEQUENCE OF HpnicfHPEOCCltSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3 |
hpnicfHPEOCCltSysManEntryThe entry of the table hpnicfHPEOCCltSysManTable. HpnicfHPEOCCltSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1 |
hpnicfHPEOCCltDescrSet the description of CLT.rw DisplayString .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.1 |
hpnicfHPEOCCltFwVersionEOC firmware version. If the object length is
zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.2 |
hpnicfHPEOCCltLinkStateThe cable port's link state. The physicaldown(1) state indicates
that the CLT is not powered on. The linkdown(2) state indicates
that the CLT is powered on, but registers fail. The linkup(3)
state indicates that the CLT is powered on, and registers
successful. The loopback(4) state indecates that the CLT is
powered on and registers successful, but loopback has detected.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.1.3.1.3 |
hpnicfHPEOCCnuSysManTableThis table implements the management of CNUs. SEQUENCE OF HpnicfHPEOCCnuSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4 |
hpnicfHPEOCCnuSysManEntryThe entry of the table hpnicfHPEOCCnuSysManTable. HpnicfHPEOCCnuSysManEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1 |
hpnicfHPEOCCnuBcastControlBroadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.1 |
hpnicfHPEOCCnuAnonymStatusAnonymity status.
true(1) - the user which uses the CNU is anonymous.
false(2) - the user which uses the CNU has an account.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.2 |
hpnicfHPEOCCnuMacLimitConfigure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address entry can access the CNU.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.4.1.3 |
hpnicfHPEOCCltAutoUpgradeAuto upgrade Status.
true(1) - The firmware of the CNU will be auto changed by CLT.
false(2)- The firmware of the CNU will not be auto changed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.5 |
hpnicfHPEOCOnLineCnuNumberThe total number of the online CNU(s).ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.6 |
hpnicfHPEOCCpuMacAddressEOC CPU's MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.7 |
hpnicfHPEOCOffLineCnuNumberThe total number of the offline CNU(s).ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.1.8 |
hpnicfHPEOCDownLoadCNUFWResultDownload CNU firmware result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.9 |
hpnicfHPEOCCltAutoUpgradeTypeType of auto upgrade status.
It depends on hpnicfHPEOCCltAutoUpgrade status.
flash - The CLT auto upgrade the firmware inside its flash
to the CNUs.
ftp - First download the firmware from FTP server to the CLT,
then the CLT auto upgrade the firmware to the CNUs.
tftp - First download the firmware from TFTP server to the CLT,
then the CLT auto upgrade the firmware to the CNUs.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.1.10 |
hpnicfHPEOCAutoUpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.84.1.11 |
hpnicfHPEOCServerAddressThe address of remote host acting as server for operation.
The default value is 0.0.0.0rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.1 |
hpnicfHPEOCServerUserWhen using ftp to transfer files, the user name must be
specified through this node. It contains 1 to 30 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.2 |
hpnicfHPEOCServerPasswordRemote user password for copying via ftp protocol. Optionally,
this object may be ignored for protocols other than ftp.
It contains 1 to 31 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.1.11.3 |
hpnicfHPEOCCltLoopbackDetectLoopback detect Status.
true(1) - The loopback detect is enabled.
false(0)- The loopback detect is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.1.12 |
hpnicfHPEOCTemplateEnableUse template for white-list cnu.
true(1) - Use template is enabled.
false(0)- Use template detect is disabled.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.1.13 |
hpnicfHPEOCCableInfo OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.84.2 |
hpnicfHPEOCCableInfoTableThis table defines the primary parameters of the
cable information. SEQUENCE OF HpnicfHPEOCCableInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1 |
hpnicfHPEOCCableInfoEntryThe entry of the table hpnicfHPEOCCableInfoTable. HpnicfHPEOCCableInfoEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1 |
hpnicfHPEOCFECErrorsThe cable port's FEC bits errors ratio. FEC means the
payload Forward Error Correction. It's a technology of
controlling errors. Packets in transmission is checked by
the receiver, if error occurs, the receiver will announce
the sender to resend.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.1 |
hpnicfHPEOCAvgBitsPerCarrierThe cable port's average bits per carrier.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.2 |
hpnicfHPEOCAvgSNRPerCarrierThe cable port's signal noise ratio(SNR) bits per carrier.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.3 |
hpnicfHPEOCAvgInPBCRCErrorsThe input PB CRC errors on average.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.4 |
hpnicfHPEOCInTotalPktsThe total number of packets(including bad packets)
received on this interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.5 |
hpnicfHPEOCAvgOutPowerThe cable port's power sent on average, the unit is db.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.6 |
hpnicfHPEOCAvgOutPBCRCErrorsThe cable port's physical block(PB) cyclic redundancy
check(CRC) errors sent on average.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.7 |
hpnicfHPEOCOutTotalPktsThe total count of the packets(including bad packets)
sent on this interface.ro Counter64 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.1.1.8 |
hpnicfHPEOCBitPerSymbolTableThis table defines the bits per symbol parameters of the
cable line. SEQUENCE OF HpnicfHPEOCBitPerSymbolEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2 |
hpnicfHPEOCBitPerSymbolEntryThe entry of the table hpnicfHPEOCBitPerSymbolTable. HpnicfHPEOCBitPerSymbolEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1 |
hpnicfHPEOCBitPerSymbolIndexThe index of the hpnicfHPEOCBitPerSymbolTable. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.1 |
hpnicfHPEOCBitPerSymbolhpnicfHPEOCBitPerSymbol returns all the bits per symbol on the fixed
frequency. Each 4 bits stand for one value, all the values
picking-up will make up a cable bit map.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.84.2.2.1.2 |
hpnicfHPEOCTemplate OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.84.3 |
hpnicfHPEOCTemplateGlobalTableThis table defines the global parameters of the
Template information. SEQUENCE OF HpnicfHPEOCTemplateGlobalEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1 |
hpnicfHPEOCTemplateGlobalEntryThe entry of the table hpnicfHPEOCTemplateGlobalTable. HpnicfHPEOCTemplateGlobalEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1 |
hpnicfHPEOCTemplateIndexThe index of cable Template.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.1 |
hpnicfHPEOCTemplateTypeThe cable Template's type, can not change after create it.rw Integer32 { switch(1), gateway(2) } .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.2 |
hpnicfHPEOCTemplateNameThe cable Template's name, it's recommended to set it
uniquely and understandably. Length: 1 to 15 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.3 |
hpnicfHPEOCTemplateDescrThe cable Template's description. Length: 0 to 63 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.4 |
hpnicfHPEOCTemplateCnuMaxDownBWMaximum downstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.5 |
hpnicfHPEOCTemplateCnuMaxUpBWMaximum upstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.6 |
hpnicfHPEOCTemplateCnuBcastControlBroadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.7 |
hpnicfHPEOCTemplateCnuMacLimitConfigure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address entry can access the CNU.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.8 |
hpnicfHPEOCTemplateCb201VlanEnUse for Cb201 cnu only.
true(1) - Enable vlan insert function.
false(2) - Disable vlan insert function.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.9 |
hpnicfHPEOCTemplateRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.3.1.1.10 |
hpnicfHPEOCTemplateSwitchTableThis table defines the port parameters of the
switch type cnu. it's not affect on the type of gateway Template. SEQUENCE OF HpnicfHPEOCTemplateSwitchEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2 |
hpnicfHPEOCTemplateSwitchEntryThe entry of the table hpnicfHPEOCTemplateSwitchTable. HpnicfHPEOCTemplateSwitchEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1 |
hpnicfHPEOCTemplateUniIndexThe index value which uniquely identifies the FE
interface of the CNU. Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.1 |
hpnicfHPEOCTemplateUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.2 |
hpnicfHPEOCTemplateUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.3 |
hpnicfHPEOCTemplateUniPriorityThe default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.4 |
hpnicfHPEOCTemplateUniFlowControlFlow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.5 |
hpnicfHPEOCTemplateUniUpLineRateThe max speed upload in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.6 |
hpnicfHPEOCTemplateUniDownLineRateThe max speed download in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.7 |
hpnicfHPEOCTemplateUniAdminStatusControl if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.8 |
hpnicfHPEOCTemplateUniVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.9 |
hpnicfHPEOCTemplateUniPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.10 |
hpnicfHPEOCTemplateUniVlanTagVLAN is set tagged or untagged.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.2.84.3.2.1.11 |
hpnicfHPEOCCnuAccess OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.2.84.4 |
hpnicfHPEOCCnuAccessTableThis table defines the global parameters of the
cnu type permitting to access. SEQUENCE OF HpnicfHPEOCCnuAccessEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1 |
hpnicfHPEOCCnuAccessEntryThe entry of the table hpnicfHPEOCCnuAccessTable. HpnicfHPEOCCnuAccessEntry .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1 |
hpnicfHPEOCCnuAccessIndexThe index value which uniquely identifies the
manuinfo of the CNU.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.1 |
hpnicfHPEOCCnuHFIDThe Cnu's HFID. Every type Cnu has it's unique HFID.
Length: 1 to 64 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.2 |
hpnicfHPEOCManuInfoThe Cnu's manufactory infofamiont.
Length: 0 to 63 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.3 |
hpnicfHPEOCCnuTypeThe Cnu's function type.rw Integer32 { switch(1), gateway(2) } .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.4 |
hpnicfHPEOCCnuSwitchTypeThe Cnu's switch chip type. It's useless for gataway type cnu.rw Integer32 { rtl8306e(1), ar8236(2), mv6061(3), mv6031(4) } .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.5 |
hpnicfHPEOCCnuUniNumUni number of the Cnu. It's useless for gataway type cnu.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.6 |
hpnicfHPEOCCnuPhy2UniReflection from phy port to uni port of the cnu.
It's useless for gataway type cnu.
For example, phy port 0,1,2,3 is reflect to uni port
1,2,3,4, then the value of this mib is {0,1,2,3}rw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.7 |
hpnicfHPEOCCnuAccessRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.2.84.4.1.1.8 |