Home/Catalog/HPN-ICF-DSP-MIB

HPN-ICF-DSP-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

This MIB is to provide the definition of the DSP(Digital Signal Processing) status.

Main OID:

hpnicfDSP.1.3.6.1.4.1.11.2.14.11.15.2.89

Objects

Active

Status

Dependencies

Imported Objects

HPN-ICF-OID-MIB

ENTITY-MIB

SNMPv2-SMI

Objects

22 total

Object Name	Syntax	OID
hpnicfDSPThis MIB is to provide the definition of the DSP(Digital Signal Processing) status. MODULE-IDENTITY `.1.3.6.1.4.1.11.2.14.11.15.2.89`	MODULE-IDENTITY	`.1.3.6.1.4.1.11.2.14.11.15.2.89`
hpnicfVPMStatusTableThe table contains status parameters of VPM(Voice Process Module) card. SEQUENCE OF HpnicfVPMStatusEntry `.1.3.6.1.4.1.11.2.14.11.15.2.89.1`	SEQUENCE OF HpnicfVPMStatusEntry	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1`
hpnicfVPMStatusEntryThe entry of VPM status table. HpnicfVPMStatusEntry `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1`	HpnicfVPMStatusEntry	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1`
hpnicfVPMIndexThe index for this entry. The sequence of VPM card in the chassis is from the top to bottom.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.1`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.1`
hpnicfVPMEnPhysicalIndexThe object corresponds to PhysicalIndex in the chassis.ro PhysicalIndex (ENTITY-MIB) `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.2`	PhysicalIndex (ENTITY-MIB)	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.2`
hpnicfVPMStateThe object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.ro Enumeration `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.3`	Enumeration	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.3`
hpnicfVPMResourceUtilizationThe object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.4`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.4`
hpnicfVPMHiWaterUtilizationThe object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.5`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.5`
hpnicfVPMMaxChannelThe maximum number of channels can be supported in each VPM card.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.6`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.6`
hpnicfDSPStatusTableThe table contains status parameters of DSP(Digital Signal Processing) card. SEQUENCE OF HpnicfDSPStatusEntry `.1.3.6.1.4.1.11.2.14.11.15.2.89.2`	SEQUENCE OF HpnicfDSPStatusEntry	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2`
hpnicfDSPStatusEntryThe entry of DSP status table. HpnicfDSPStatusEntry `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1`	HpnicfDSPStatusEntry	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1`
hpnicfDSPIndexThe index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.1`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.1`
hpnicfDSPVPMIndexThe object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.2`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.2`
hpnicfDSPEnPhysicalIndexThe object corresponds to PhysicalIndex in the chassis.ro PhysicalIndex (ENTITY-MIB) `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.3`	PhysicalIndex (ENTITY-MIB)	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.3`
hpnicfDSPResetTimeThe value of sysUpTime from the last DSP reset occurred.ro TimeTicks (SNMPv2-SMI) `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.4`	TimeTicks (SNMPv2-SMI)	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.4`
hpnicfDSPMaxChannelThe maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.5`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.5`
hpnicfDSPStateThe object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.ro Enumeration `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.6`	Enumeration	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.6`
hpnicfDSPInUseChannelThe number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection.ro Integer32 `.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.7`	Integer32	`.1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.7`
hpnicfDSPTrap OBJECT IDENTIFIER `.1.3.6.1.4.1.11.2.14.11.15.2.89.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.11.2.14.11.15.2.89.3`
hpnicfDSPTrapPrex OBJECT IDENTIFIER `.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0`
hpnicfVPMStateChangeThis trap is sent when VPM state changes. NOTIFICATION-TYPE `.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.1`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.1`
hpnicfDSPStateChangeThis trap is sent when DSP state changes. NOTIFICATION-TYPE `.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.11.2.14.11.15.2.89.3.0.2`