HPN-ICF-HGMP-MIB
This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.
Main OID:
hpnicfHgmp.1.3.6.1.4.1.11.2.14.11.15.8.7
146
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
146 total| Object Name |
|---|
hpnicfHgmpThis MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products. MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.7 |
hpnicfClusterObjectThis MIB contains objects to manage the cluster operations, which are used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.1 |
hpnicfhgmpEventsV2Definition point for cluster notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.1.0 |
hpnicfhgmpMemberfailureWhen a cluster member failure, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.1 |
hpnicfhgmpMemberRecoverWhen a cluster member recover, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.2 |
hpnicfhgmpMemberStatusChangeWhen a cluster member status change, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.3 |
hpnicfhgmpNetTopChangeWhen net topology of this cluster change, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.4 |
hpnicfhgmpSetVLANSecurityConfigure whether to perform the VLAN check inside the cluster.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.1.1 |
hpnicfhgmpHandShakeIntervalHandshaking interval of the cluster member switches.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.2 |
hpnicfhgmpHandShakeHoldtimeHoldtime of administrator switch and member switch in the cluster.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.3 |
hpnicfhgmpGrpMemberTableChangeAdd 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.4 |
hpnicfhgmpMemberDisconRateDisconnection times of the member and administrator switches divided by member number times 1000.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.5 |
hpnicfhgmpCmdLanswitchFlagAdministrator switch flagrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.1.6 |
hpnicfhgmpCmdClusterNameCluster name of the administrator switchrw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.7 |
hpnicfhgmpMngPriIpSegCMIPThe private management IP address of the administrator switch, which can not be modified after the cluster has been created.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.8 |
hpnicfhgmpMngPriIpMaskThe private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.9 |
hpnicfhgmpFtpServerThe cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.10 |
hpnicfhgmpTftpServerThe cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.11 |
hpnicfhgmpSnmpHostThe Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.12 |
hpnicfhgmpLogHostLog host of the cluster, which can only be configured and accessed on the administrator switch.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.13 |
hpnicfhgmpGrpMemberTableTable of cluster member switches SEQUENCE OF HpnicfHgmpGrpMemberEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14 |
hpnicfhgmpGrpMemberEntry HpnicfHgmpGrpMemberEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1 |
hpnicfhgmpGrpMemberDeviceId4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.1 |
hpnicfhgmpGrpMemberSerialWhen adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.2 |
hpnicfhgmpGrpMemberIpAddrThe private IP addresses of the member switches for the communication inside the cluster.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.3 |
hpnicfhgmpGrpMemberNameHostname of the member switchro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.4 |
hpnicfhgmpGrpMemberPasswordMember password for joining a clusterrw OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.5 |
hpnicfhgmpGrpMemberPlatformSet the hardware platform. A null string indicates the information does not exist in the device adjacency table.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.6 |
hpnicfhgmpGrpMemberStatusMember status on the administrator switch, use for displaying the network management status.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.7 |
hpnicfhgmpGrpMemberDisconCountCount of inside communication disconnection between the member switch and the administrator switch.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.8 |
hpnicfhgmpGrpMemberEnrollTimeEnrollment time of the member, measured in seconds.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.9 |
hpnicfhgmpGrpMemberOperateOperation indication field, indicates the operation of adding/removing a member by the network management agent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.10 |
hpnicfhgmpMemberResetTableReset a member switch in the cluster. SEQUENCE OF HpnicfHgmpMemberResetEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.15 |
hpnicfhgmpMemberResetEntry HpnicfHgmpMemberResetEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1 |
hpnicfhgmpMemberResetMACThe management MAC address of the switch to be reset, which is the unique identifier of the switch.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.1 |
hpnicfhgmpMemberEraseflashWhether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.2 |
hpnicfhgmpClusterRoleThis switch's role in cluster.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.1.16 |
hpnicfhgmpClusterMaxPoolNumMax switch members that the cluster can support(include administrator switch).ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.7.1.17 |
hpnicfhgmpClusterCmdSwMacThe MAC address of administrator switch. It will be filled with zero when not be a member of cluster.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.18 |
hpnicfhgmpRunEnable cluster on this switch.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.1.19 |
hpnicfhgmpProtocolMac OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.1.22 |
hpnicfhgmpClusterProtocolMacProtocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.7.1.22.1 |
hpnicfhgmpTopologyManagement OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23 |
hpnicfhgmpWhitelistTableCluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure. SEQUENCE OF HpnicfHgmpWhitelistEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1 |
hpnicfhgmpWhitelistEntryEntry items HpnicfHgmpWhitelistEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1 |
hpnicfhgmpWhitelistDeviceIdUnique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.1 |
hpnicfhgmpWhitelistSerialWhen adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.ro Integer32(0..2047 | 65535) .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.2 |
hpnicfhgmpWhitelistRowStatusThe row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.3 |
hpnicfhgmpWhitelistNbTableCluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology. SEQUENCE OF HpnicfHgmpWhitelistNbEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2 |
hpnicfhgmpWhitelistNbEntryEntry items HpnicfHgmpWhitelistNbEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1 |
hpnicfhgmpWhitelistNbIndexIndex of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'. Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.1 |
hpnicfhgmpWhitelistNbDeviceIdUnique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.2 |
hpnicfhgmpWhitelistPortNameThe name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.3 |
hpnicfhgmpWhitelistNbPortNameThe name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.4 |
hpnicfhgmpBlacklistTableCluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster. SEQUENCE OF HpnicfHgmpBlacklistEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3 |
hpnicfhgmpBlacklistEntryEntry items HpnicfHgmpBlacklistEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1 |
hpnicfhgmpBlacklistDeviceIdUnique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.1 |
hpnicfhgmpBlacklistAccessDeviceIdUnique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.2 |
hpnicfhgmpBlacklistAccessPortNameThe port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.3 |
hpnicfhgmpBlacklistRowStatusThe row status of this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.4 |
hpnicfhgmpMemberPriPortTableThis table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address. SEQUENCE OF HpnicfHgmpMemberPriPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.24 |
hpnicfhgmpMemberPriPortEntryInformation about a specified member private port entry. The indexes of the entry are hpnicfhgmpGrpMemberDevId and hpnicfhgmpMemberPriPortProto, which indicate entries in the table. HpnicfHgmpMemberPriPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1 |
hpnicfhgmpMemberDevIdUnique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.1 |
hpnicfhgmpMemberPriPortProtoThe index of this table. Each instance value of this object corresponds to a different protocol. Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.2 |
hpnicfhgmpMemberPriPortProtoDescrIt describes the hpnicfhgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hpnicfhgmpMemberPriPortProtocol value is 1.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.3 |
hpnicfhgmpMemberPriPortNumThe private port number of member switch, used by specified hpnicfhgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hpnicfhgmpGrpMemberIpAddr.ro Unsigned32 .1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.4 |
hpnicfStackObjectThis MIB contains objects to manage the stack operations, which is used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.2 |
hpnicfhgmpStackEventsV2Definition point for Stack notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.2.0 |
hpnicfhgmpStackMemberfailureWhen a stack member failure, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.1 |
hpnicfhgmpStackMemberRecoverWhen a stack member Recover, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.2 |
hpnicfhgmpStackMemberStatusChangeWhen a stack member status change, send a snmp trap to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.3 |
hpnicfhgmpStackMemberTableChangeChange identifier of the stack member table.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.2.1 |
hpnicfhgmpStackMemberDisconRateDisconnection rate of the stack member switches.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.2.2 |
hpnicfhgmpMainLanswitchFlagThe status of the local switch in the stack.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.2.3 |
hpnicfhgmpStackIpPoolStartIPThe first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.2.4 |
hpnicfhgmpStackIpPoolLengthThe length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.rw INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.7.2.5 |
hpnicfhgmpStackMemberTableStack member table. SEQUENCE OF HpnicfHgmpStackMemberEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6 |
hpnicfhgmpStackMemberEntry HpnicfHgmpStackMemberEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1 |
hpnicfhgmpStackMemberDeviceId2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.1 |
hpnicfhgmpStackMemberSerialWhen adding a member switch to the stack, the master switch will assign an unique integer to identify it.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.2 |
hpnicfhgmpStackMemberIpAddrThe private member IP address for the communication inside the stack.ro IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.3 |
hpnicfhgmpStackMemberNameHostname of the member switch.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.4 |
hpnicfhgmpStackMemberPasswordMember password for joining a stack.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.5 |
hpnicfhgmpStackMemberPlatformSet the hardware platform. A null string indicates the information does not exist in the device adjacency table.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.6 |
hpnicfhgmpStackMemberStatusMember status on the master switch, use for displaying the network management status.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.7 |
hpnicfhgmpStackMemberDisconCountCount of inside communication disconnection between the member switch and the master switch.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.8 |
hpnicfhgmpStackMemberEnrollTimeEnrollment time of the member, measured in seconds.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.9 |
hpnicfhgmpStackRoleThis switch's role status in stack.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.2.7 |
hpnicfhgmpStackMaxPoolNumMax switch members in one stack that the switch support (include main switch).ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.7.2.8 |
hpnicfhgmpStackMainSwMacThe MAC address of main switch. It will be 00.00.00 when not be a member of stack.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.2.9 |
hpnicfhgmpStackIpPoolMaskThe mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.rw IpAddress .1.3.6.1.4.1.11.2.14.11.15.8.7.2.10 |
hpnicfNTDPObjectThis MIB contains objects to manage the ntdp operations, which are used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.4 |
hpnicfhgmpNTDPCollectTopTimeTopology collection interval of the administrator switch of the cluster, measured in minutes.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.1 |
hpnicfhgmpNTDPHopRangeRange of the topology collection of the administrator switchrw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.2 |
hpnicfhgmpNTDPRunEnable/Disable the NTDP function on the switch.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.4.3 |
hpnicfhgmpNTDPPortDelaySet the delay to forward the topology request via the ports, measured in milliseconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.4 |
hpnicfhgmpNTDPHopDelaySet the delay to forward the topology request from every hop, measured in milliseconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.5 |
hpnicfhgmpNTDPLastTopCollectDurationDuration of the latest overall topology collection, a performance count measured in seconds.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.6 |
hpnicfhgmpNTDPCacheChangeAdd 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.7 |
hpnicfhgmpNTDPTOPTableChangeAdd 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.8 |
hpnicfhgmpNTDPInterfaceTableEnable/Disable the NTDP on the switch port. SEQUENCE OF HpnicfHgmpNTDPInterfaceEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.4.9 |
hpnicfhgmpNTDPInterfaceEntry HpnicfHgmpNTDPInterfaceEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1 |
hpnicfhgmpNTDPInterfaceIfIndexUnique identifier an interface of the device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.1 |
hpnicfhgmpNTDPInterfaceEnableIf it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.2 |
hpnicfhgmpNTDPCacheTableAccess the information about the switch from the topology table. SEQUENCE OF HpnicfHgmpNTDPCacheEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10 |
hpnicfhgmpNTDPCacheEntry HpnicfHgmpNTDPCacheEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1 |
hpnicfhgmpNTDPCacheHashIndexOur NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.1 |
hpnicfhgmpNTDPCacheDeviceID2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.2 |
hpnicfhgmpNTDPCacheClusterNameName of the cluster including the device.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.3 |
hpnicfhgmpNTDPCacheClusterRoleCluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.4 |
hpnicfhgmpNTDPCacheCapabilitiesThe capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.5 |
hpnicfhgmpNTDPCacheVersionThe version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.6 |
hpnicfhgmpNTDPCachePlatformHardware platform. A null string indicates that the field was not included in the latest NTDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.7 |
hpnicfhgmpNTDPCacheMngVLANThe management VLAN ID of the device.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.8 |
hpnicfhgmpNTDPCacheHopHops to this switch.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.9 |
hpnicfhgmpNTDPTopTableAccess the topology structure collected by the NTDP. SEQUENCE OF HpnicfHgmpNTDPTopEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11 |
hpnicfhgmpNTDPTopEntry HpnicfHgmpNTDPTopEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1 |
hpnicfhgmpNTDPTopHashIndexOur NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.1 |
hpnicfhgmpNTDPTopEdgeStartDevID2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.2 |
hpnicfhgmpNTDPTopEdgeIndexEdge index of this entry in the data structure.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.3 |
hpnicfhgmpNTDPTopEdgeEndDevID2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.4 |
hpnicfhgmpNTDPTopEdgeStartPortThe number of the first port of a topology edge. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.5 |
hpnicfhgmpNTDPTopEdgeStartPortFullDuplexThe full-duplex status of the first port on a topology edge.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.6 |
hpnicfhgmpNTDPTopEdgeStartPortSpeedThe speed of the first port on a topology edge.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.7 |
hpnicfhgmpNTDPTopEdgeEndPortThe number of the last port of a topology edge. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.8 |
hpnicfhgmpNTDPTopLinkStatusIn STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.11 |
hpnicfNDPObjectThis MIB contains objects to manage the ndp operations, which are used on lanswitch products. OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.7.5 |
hpnicfNDPStatusNDP protocol module enable flagrw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.5.1 |
hpnicfNDPHelloTimerNDP packet transmission interval, measured in seconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.5.2 |
hpnicfNDPAgingTimeHow long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.rw Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.5.3 |
hpnicfNDPChangeChange identifier of the Neighbor tablero Counter32 .1.3.6.1.4.1.11.2.14.11.15.8.7.5.4 |
hpnicfNDPPortTableConfigure to enable/disable the interface NDP of the switch. SEQUENCE OF HpnicfNDPPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.5.5 |
hpnicfNDPPortEntry HpnicfNDPPortEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1 |
hpnicfNDPIfIndexUnique identifier of an interface of the device.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.1 |
hpnicfNDPPortStatusIf it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.2 |
hpnicfNDPPortNbTableNDP neighbor information on the switch. SEQUENCE OF HpnicfNDPPortNbEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6 |
hpnicfNDPPortNbEntry HpnicfNDPPortNbEntry .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1 |
hpnicfNDPPortNbDeviceId2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.1 |
hpnicfNDPPortNbPortNameUnique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.2 |
hpnicfNDPPortNbDeviceNameDevice name. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.3 |
hpnicfNDPPortNbPortModeThe neighbor port duplex mode.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.4 |
hpnicfNDPPortNbProductVerProduct version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.5 |
hpnicfNDPPortNbHardVerHardware version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.6 |
hpnicfNDPPortNbBootromVerBootrom version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.7 |
hpnicfNDPPortNbSoftVerSoftware version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.8 |
hpnicfNDPPortNbAgingtimeHow long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.ro Integer32 .1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.9 |