HPN-ICF-LswMix-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
11
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
hpnicfLswMix MODULE-IDENTITY .1.3.6.1.4.1.11.2.14.11.15.8.35.17 |
hpnicfLswLastSwitchDateThis object indicates the date of the most recent change to the mpu(Main Processing Unit).ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.17.1 |
hpnicfLswLastSwitchTimeThis object indicates the time of the most recent change to the mpu.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.17.2 |
hpnicfLswMpuSwitchsNumThis object indicates the total times of the mpu switched since the system start up.ro INTEGER .1.3.6.1.4.1.11.2.14.11.15.8.35.17.3 |
hpnicfLswMpuSwitchSetting this object will immediately switch the standby mpu to master mpu. Read is not supported.rw Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.17.4 |
hpnicfLswXSlotTableThe source main table. SEQUENCE OF HpnicfLswXSlotEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.17.5 |
hpnicfLswXSlotEntryAn entry in the source main table. HpnicfLswXSlotEntry .1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1 |
hpnicfLswMainCardBoardStatusThe value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit)ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.1 |
hpnicfLswCrossBarStatusThe value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode.ro Enumeration .1.3.6.1.4.1.11.2.14.11.15.8.35.17.5.1.2 |
hpnicfsMixTrapMib OBJECT IDENTIFIER .1.3.6.1.4.1.11.2.14.11.15.8.35.17.10 |
hpnicfSlaveSwitchOverAn hpnicfSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed. NOTIFICATION-TYPE .1.3.6.1.4.1.11.2.14.11.15.8.35.17.10.1 |
More MIBs from HP
Browse all HPMIBs →BLADETYPE6-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE6-NETWORK-MIB.
2263 objects→
BLADETYPE5-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE5-NETWORK-MIB.
2240 objects→
BLADETYPE4-NETWORK-MIB
Standard SNMP MIB module defining data structures for BLADETYPE4-NETWORK-MIB.
2226 objects→
HPN-ICF-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HPIPFTRAP-MIB
Standard SNMP MIB module defining data structures for HPIPFTRAP-MIB.
1186 objects→
BLADETYPE2-NETWORK-MIB
The BLADETYPE2-NETWORK-MIB module provides SNMP access to Layer 3 configuration parameters, interface statistics, and routing information for blade server network interfaces. It enables monitoring of IP address assignments, interface operational states, and packet counters specific to the blade chassis network subsystem.
1056 objects→