MIB Catalog
89 modules loaded — click any MIB to explore
Allied Telesis
89MIB module
The AT Alarm Monitoring MIB for managing and reporting device alarms.
This MIB file contains definitions of managed objects for the ATMF module.
OID boards is a subtree beneath which board ids are assigned. release is a subtree beneath which release ids are assigned. ifTypes is a subtree beneath which interface type ids are assigned. chips is
This MIB file contains definitions of managed objects for the BRI module.
MIB module
MIB module
Support for accessing trap notifications on chassis based products.
This MIB file contains definitions of managed objects for the DHCP module.
Added two more violation types for DHCP Snooping.
This MIB file contains definitions of managed objects for the Allied Telesis DNS Client configuration.
The Denial of Service defense MIB for managing defenses against denial of service attacks.
This MIB file contains definitions of managed objects for the DS3 module.
The AT Environment Monitoring MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units.
The AT Environment Monitoring v2 MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units.
Convert epsrEventVariables into a table entry, so variable of mutiple EPSR domains can be obtained.
Convert epsrv2Variables into a table entry, so variable of multiple EPSRv2 domains can be obtained.
This MIB file contains definitions of managed objects for the ethernet module.
This MIB contains managed objects definition and notification definitions for AT Fiber Monitoring feature.
This MIB file contains definitions of managed objects for the FILE module.
The AT File v2 MIB, for listing file contents of flash, nvs and sd-cards on local and stacked devices, and copying, moving and deleting files from local, stacked and remote sources.
This MIB file contains definitions of managed objects for the FIREWALL module.
This MIB file contains definitions of managed objects for the FLASH module.
G.8032v2 Ethernet Ring Protection Switching.
The AT Hardware Health Monitoring MIB.
The MIB module for IGMP Management.
This MIB file contains definitions of managed objects for the INSTALL module.
subtree beneath which interface ids are assigned..
The IP MIB - for AT specific IP management.
This MIB file contains definitions of managed objects for the CC module.
This MIB file contains definitions of managed objects for the LB module.
The license MIB, for listing applied software licenses, adding new licenses, and deleting existing licenses.
The AT-LINKTRAP MIB contains objects for link up and down traps.
To handle upload, object loadStatus is upgraded, as well as the description for objects loadServer and loadFilename.
The AT Log MIB, for listing log entries from the buffered and permament logs.
This MIB file contains definitions of managed objects for the Loop Protection modules.
The mib-set version MIB, for detailing the versions of MIB's that are currently supported by AT software.
This MIB file contains definitions of managed objects for the Allied Telesis Network Time Protocol configuration.
Description of atrDot1xUnauthenticated is modified.
Contains definitions of managed objects for the handling PIM4 enterprise functions on AT switches.
This MIB file contains definitions of managed objects for the PING module.
The AT Pluggbale Diagnostics MIB contains objects to retrieve the standard diagnostic information from installed SFP modules.
This MIB file contains definitions of managed objects for the PRI module.
This file defines the identities of Allied Telesis products. OID products is the root OBJECT IDENTIFIER. Beneath it there are subtrees bridgeRouter, routerSwitch and swhub, which are defined in AT-SMI
This MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module.
This MIB file contains definitions of managed objects for the handling QoS on Allied Telesis switches. There are a number of tables designed to be generic to all ATR switches supporting QoS in silicon
This MIB file contains definitions of managed objects for the QoS module.
The AT-RESOURCE-MIB contains objects for displaying system hardware resource information.
The AT Setup MIB for managing the software installation and configuration files.
The Structure of Management Information for Allied Telesis enterprise.
This MIB file contains definitions of managed objects for the handling of stacking Allied Telesis switches.
This MIB file contains definitions of managed objects for the SWITCH module.
Subtree beneath which system inforamtion ids are assigned. It contains generic system information, as follows: { sysinfo 1 } fanAndPs { sysinfo 2 } restartGroup { sysinfo 3 } cpu { sysinfo 4 } sysTemp
This MIB file contains definitions of managed objects for the TRIGGER module.
This MIB file contains definitions of managed objects for the TTY module.
This MIB file contains definitions of managed objects for the UDLD module.
The AT-USER MIB contains objects for displaying information of users currently logged into a device, or configured in the local user data base of the device.
The Allied Telesis Private MIB for AT-UWC
This MIB file contains definitions of managed objects for Virtual Chassis Stacking in AlliedWare Plus.
The VLAN MIB, for retrieving VLAN specific system data.
The AT-XEM MIB contains objects for monitoring XEMs installed in the device.
MIB module
MIB module
MIB module
MIB module
Private MIB for the AT-TQ series wireless access point.
MIB module
MIB module
Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments.
MIB module
Private MIB for ATI next generation layer 2 switches. This MIB contains stacking related groups.
Private MIB for ATI next generation layer 2 switches. This MIB can be used in Windows and UNIX environment
MIB module
Atkk network port objects
Atkk Quality-of-Service objects
Atkk Switch System objects
MIB module
Atkk Virtual LAN objects
MIB module
MIB module
MIB module
MIB module
The MIB module for ATM support. This module is designed with the assumption that only one virtual path identifier (VPI) may be assigned and is usually determined by the underlying software implementat
The MIB module for bridge and spanning tree protocol. This mib is based on RFC 1493 with modifications to support multiple bridges, one for each virtual LAN (VLAN), in one physical chassis. The bridge
The MIB module for SWITCH chassis entity.
The MIB module identifies objects containing vendor information.
The MIB module for supporting HS150 product specific MIB objects.
This module provides definitions for the Hitachi Computer Products, Network System Group (SWITCH), Virtual LAN (VLAN) MIB.
MIB module