ATKKACTN-MIB
Standard SNMP MIB module defining data structures for ATKKACTN-MIB.
Imported Objects
Objects
46 total| Object Name |
|---|
alliedTelesyn OBJECT IDENTIFIER .1.3.6.1.4.1.207 |
RFC1155-SMI Unknown .1.3.6.1.4.1.207 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.207.1 |
mibObject OBJECT IDENTIFIER .1.3.6.1.4.1.207.8 |
repeaterMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1 |
newRepeaterMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20 |
acctonHubMIB OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3 |
acctonCommon OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1 |
accsystem OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1.1 |
majorVerSoftware major versionro INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.1.1 |
minorVerSoftware minor versionro INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.1.2 |
hardwareVerHardware version of system boardro INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.1.3 |
communityMgt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1.2 |
communityStringSizeThe length of the community stringro INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.2.1 |
communityTableSizeThe size of the community tablero INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.2.2 |
communityTableCommunity table SEQUENCE OF CommunityEntry .1.3.6.1.4.1.207.8.1.20.3.1.2.3 |
communityEntry CommunityEntry .1.3.6.1.4.1.207.8.1.20.3.1.2.3.1 |
communityIndexIndex in community tablero INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.1 |
communityStringCommunity string; the length is limited by
communityStringSizerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.2 |
communityAccessModeAccess mode of the communityrw Enumeration .1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.3 |
communityStatusEntries marked valid or invalid can not be changed.
When a manager wants to define a new community, he
sets an entry from valid or invalid to underChange,
then begins to define values in the table. After the
entry is completed, change it to valid, then the
community is enabled. To delete a community, just
change the status to invalid. Currentlty, only three
values are accepted:
invalid
underChange
validrw INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.2.3.1.4 |
trapManagerMgt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1.3 |
trapManagerTableSizeSize of trap manager tablero INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.3.1 |
trapManagerTableThe trap manager table SEQUENCE OF TrapManagerEntry .1.3.6.1.4.1.207.8.1.20.3.1.3.2 |
trapManagerEntry TrapManagerEntry .1.3.6.1.4.1.207.8.1.20.3.1.3.2.1 |
trapMgrIndexIndex to the trap manager tablero INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.1 |
trapMgrCommunityIndexCommunity string specified by the index
in the community tablerw INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.2 |
trapMgrIpaddressIP address of the network managerrw IpAddress .1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.3 |
trapMgrEntryStatusEntries marked valid or invalid can not be changed.
To define a new manager, set an entry from valid
or invalid to underChange. Then fill in the required
information. Setting the status to valid enables
the entry. Setting the status to invalid deletes
the entry. Currentlty, only three value are accepted:
invalid
underChange
validrw Enumeration .1.3.6.1.4.1.207.8.1.20.3.1.3.2.1.4 |
downloadMgt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1.4 |
downloadServerIPThe file server with the download filerw IpAddress .1.3.6.1.4.1.207.8.1.20.3.1.4.1 |
downloadFilenameName of file to downloadrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.1.4.2 |
downloadModePermanent upgrade stores download software into permanent
storage of the agent device. Temporary upgrade just puts
download software in RAM, often for a test only.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.1.4.3 |
downloadActionDownloadAction triggers the download operation. The run option
starts the new software after downloading is complete.
The noRun option does not execute the new software. The new
software will be effective after the next restart. Note that the
noRun option is useful only when the download is permanent.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.1.4.4 |
restartA write to restart the machine
Currentlty, only three value are accepted:
normal
coldstart
warmstartrw INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.5 |
acctest OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1.6 |
testTrapA write to testTrap triggers a warm-start trap
for testing trap capabilityrw Enumeration .1.3.6.1.4.1.207.8.1.20.3.1.6.1 |
ipxtrapManagerMgt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.1.20.3.1.7 |
ipxtrapManagerTableSizeSize of ipx trap manager tablero INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.7.1 |
ipxtrapManagerTableThe ipx trap manager table SEQUENCE OF IpxTrapManagerEntry .1.3.6.1.4.1.207.8.1.20.3.1.7.2 |
ipxtrapManagerEntry IpxTrapManagerEntry .1.3.6.1.4.1.207.8.1.20.3.1.7.2.1 |
ipxtrapMgrIndexIndex to the ipx trap manager tablero INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.1 |
ipxtrapMgrCommunityIndexCommunity string specified by the index
in the community tablerw INTEGER .1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.2 |
ipxtrapMgrNetNumberThe network number portion of the IPX address of
this network managerrw OCTET STRING .1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.3 |
ipxtrapMgrNodeThe node number portion of the IPX address of
this network managerrw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.4 |
ipxtrapMgrEntryStatusEntries marked valid or invalid can not be changed.
To define a new manager, set an entry from valid
or invalid to underChange. Then fill in the required
information. Setting the status to valid enables
the entry. Setting the status to invalid deletes
the entry.rw Enumeration .1.3.6.1.4.1.207.8.1.20.3.1.7.2.1.5 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.