Home/Catalog/AT-UWC-WLAN-SWITCH-MIB

AT-UWC-WLAN-SWITCH-MIB

AI MIB Summary

The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.

The Allied Telesis Private MIB for AT-UWC
Main OID:
fastPathWLANSwitch.1.3.6.1.4.1.207.8.42.8.34
1457
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
AT-SMI-MIB

Objects

1457 total
Object Name
at_uwc
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.1.13.21
fastPathWLANSwitchThe Allied Telesis Private MIB for AT-UWC
MODULE-IDENTITY
.1.3.6.1.4.1.207.8.42.8.34
wsTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.0
wsModeEnabledA wsModeEnabled trap signifies that the SNMP entity, acting in an agent role, has detected that Wireless functionality on the device is enabled.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.1
wsModeDisabledA wsModeDisabled trap signifies that the SNMP entity, acting in an agent role, has detected that Wireless functionality on the device is disabled.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.2
wsManagedAPDatabaseFullA wsAPDatabaseFull trap signifies that the SNMP entity, acting in an agent role, has detected that AP Database is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.3
wsManagedAPNeighborAPListFullA wsManagedAPNeighborListFull trap signifies that the SNMP entity, acting in an agent role, has detected that ManagedAP neighbor AP list is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.4
wsManagedAPNeighborClientListFullA wsManagedAPNeighborClientListFull trap signifies that the SNMP entity, acting in an agent role, has detected that ManagedAP neighbor client list is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.5
wsAPFailureListFullA wsAPFailureListFull trap signifies that the SNMP entity, acting in an agent role, has detected that AP failure list full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.6
wsRFScanAPListFullA wsRFScanAPListFull trap signifies that the SNMP entity, acting in an agent role, has detected that RF scan AP list is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.7
wsClientAssociationDatabaseFullA wsClientAssociationDatabaseFull trap signifies that the SNMP entity, acting in an agent role, has detected that client association database is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.8
wsPeerSwitchDiscoveredA wsPeerSwitchDiscovered trap signifies that the SNMP entity, acting in an agent role, has detected peer controller in the network.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.9
wsPeerSwitchFailedA wsPeerSwitchFailed trap signifies that the SNMP entity, acting in an agent role, has detected that peer controller connection failed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.10
wsPeerSwitchUnknownProtocolA wsPeerSwitchUnknownProtocol trap signifies that the SNMP entity, acting in an agent role, has detected unknown protocol between wireless controller and peer controller communication.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.11
wsManagedAPDiscoveredA wsManagedAPDiscovered trap signifies that the SNMP entity, acting in an agent role, has detected the managed AP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.12
wsManagedAPFailedA wsManagedAPFailed trap signifies that the SNMP entity, acting in an agent role, has detected the failed AP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.13
wsManagedAPUnknownProtocolA wsManagedAPUnknownProtocol trap signifies that the SNMP entity, acting in an agent role, has detected the unknown protocol between wireless controller and managed AP communication.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.14
wsAPAssociationFailureA wsAPAssociationFailure trap signifies that the SNMP entity, acting in an agent role, has detected that AP association failed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.15
wsAPAuthenticationFailureA wsAPAuthenticationFailure trap signifies that the SNMP entity, acting in an agent role, has detected that AP authentication failed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.16
wsRFScanRogueAPDetectedA wsRFScanRogueAPDetected trap signifies that the SNMP entity, acting in an agent role, has detected Rogue AP through RF Scan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.17
wsRFScanAPDetectedA wsRFScanAPDetected trap signifies that the SNMP entity, acting in an agent role, has detected AP through RF Scan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.18
wsRFScanNewClientDetectedA wsRFScanNewClientDetected trap signifies that the SNMP entity, acting in an agent role, has detected new client through RF Scan.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.19
wsClientAssociationDetectedA wsClientAssociationDetected trap signifies that the SNMP entity, acting in an agent role, has detected client association.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.20
wsClientDisassociationDetectedA wsClientDisassociationDetected trap signifies that the SNMP entity, acting in an agent role, has detected client disassociation.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.21
wsClientRoamDetectedA wsClientRoamDetected trap signifies that the SNMP entity, acting in an agent role, has detected client roaming.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.22
wsClientAssociationFailureA wsClientAssociationFailure trap signifies that the SNMP entity, acting in an agent role, has detected client association failure.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.23
wsClientAuthenticationFailureA wsAuthenticationFailure trap signifies that the SNMP entity, acting in an agent role, has detected client authentication failure.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.24
wsAdHocClientDetectedA wsAdHocClientDetected trap signifies that the SNMP entity, acting in an agent role, has detected Ad hoc client.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.25
wsWLANBandwidthUtilizationExceededA wsWLANBandwidthUtilizationExceeded trap signifies that the SNMP entity, acting in an agent role, has detected WLAN bandwidth utilization exceeding the limit.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.26
wsAdHocClientListFullA wsAdHocClientListFull trap signifies that the SNMP entity, acting in an agent role, has detected that Ad hoc client database is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.27
wsPeerSwitchConfigurationCommandReceivedA wsPeerSwitchConfigurationCommandReceived trap signifies that the SNMP entity, acting in an agent role, has received Configuration command from the peer controller in the network. The config mask received is also returned in the trap.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.28
wsPeerSwitchManagedAPLimitExceededA wsPeerSwitchManagedAPLimitExceeded trap signifies that the SNMP entity, acting in an agent role, has detected that the Peer controller Managed AP database limit has exceeded.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.29
wsPeerSwitchClientLimitExceededA wsPeerSwitchClientLimitExceeded trap signifies that the SNMP entity, acting in an agent role, has detected that the Peer controller Client database limit has exceeded.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.30
wsClusterControllerElectedA wsClusterControllerElected trap signifies that the SNMP entity, acting in an agent role, has elected itself as Cluster Controller in the peer group.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.32
wsClusterMaxAPExceededA wsClusterMaxAPExceeded trap signifies that the SNMP entity, acting in an agent role, has detected that the managed APs in the network has exceeded.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.33
wsRoguesPresentA wsRoguesPresent trap signifies that the SNMP entity, acting in an agent role, has detected one or more Rogues present in the network.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.34
wsDetectedClientListFullA wsDetectedClientListFull trap signifies that the SNMP entity, acting in an agent role, has detected that Detected client database is full.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.35
wsRogueClientsPresentA wsRogueClientsPresent trap signifies that the SNMP entity, acting in an agent role, has detected one or more Rogue Clients present in the network.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.36
wsChannelPlanAlgoCompleteA wsChannelAlgorithmComplete trap signifies that the SNMP entity, acting in an agent role, has detected channel algorithm complete event.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.37
wsPowerPlanAlgoCompleteA wsPowerAlgorithmComplete trap signifies that the SNMP entity, acting in an agent role, has detected power algorithm complete event.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.38
wsLocallyManagedAPLimitExceededA wsLocallyManagedAPLimitExceeded trap signifies that the SNMP entity, acting in an agent role, has detected that the WS locally managed AP limit is exceeded.
NOTIFICATION-TYPE
.1.3.6.1.4.1.207.8.42.8.34.0.41
wsGlobalConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1
wsModeFlag to enable/disable wireless controller functionality on the device. Disable will purge all status and statistics related to wireless functionality.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.1
wsCountryCodeThis object indicates country of operation for WLAN. Supported country codes are: Australia - AU, Austria - AT, Austria - AT, Belgium - BE, Brazil - BR, Canada - CA, China - CN, Czech Republic - CZ, Denmark - DK, Finland - FI, France - FR, Germany - DE, Greece - GR, Hong Kong - HK, Hungary - HU, Iceland - IS, India - IN, Ireland - IE, Israel - IL, Italy - IT, Japan - JP, Liechtenstein - LI,Luxembourg - LU,Malaysia - MY, Mexico - MX, Netherlands - NL, New Zealand - NZ, Norway - NO, Poland - PL, Portugal - PT, Saudi Arabia - SA, Singapore - SG, Slovakia - SK, Slovenia - SI, South Africa - ZA, South Korea - KR, Spain - ES, Sweden - SE, Switzerland - CH, Taiwan - TW, Thailand - TH, United Arab Emirates - AE, United Kingdom - GB, United States - US.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.2
wsPeerGroupIdThis object indicates which peer group this controller belongs to, there may be more than one group of peer controllers in the WLAN.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.3
wsAPValidationMethodThis object indicates whether or not to verify newly discovered APs and look up their configuration against the local database or a RADIUS server.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.4
wsAPAuthenticationModeFlag to indicate if authentication is required for an AP to establish communication with the controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.5
wsClientRoamAgeTimeTime in seconds to wait after a client disassociates from a managed AP before deleting the client association database entry.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.6
wsRFScanAgeTimeTime in hours to wait before deleting an entry obtained from an RF scan.A value of 0 in input range means that the entry never ages out.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.7
wsAPFailureAgeTimeTime in hours to wait before deleting an entry in the AP association and authentication failure list. A value of 0 in input range means that the entry never ages out.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.8
wsAdHocClientAgeTimeTime in hours to wait before deleting an entry in Ad hoc client list.A value of 0 in input range means that the entry never ages out.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.9
wsDetectedClientAgeTimeTime in hours to wait before deleting an entry from the detected clients database.A value of 0 in input range means that the entry never ages out.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.10
wsValidAPConfigTableThis table contains configurable parameters for a specific AP. When an AP is discovered and the wsValidationMethod is local, its MAC address is verified in this table to determine if it should be managed by the controller.
SEQUENCE OF WsValidAPConfigEntry
.1.3.6.1.4.1.207.8.42.8.34.1.11
wsValidAPConfigEntryEach entry has parameters that can be configured locally or on a RADIUS server, for a specific AP on the WLAN. As this table is indexed by wsAPMacAddress, - to create an entry, specify the AP MAC address and set object wsAPConfigRowStatus to createAndGo(4) - to delete an entry, select the entry from the list and set object wsAPConfigRowStatus to destroy(6)
WsValidAPConfigEntry
.1.3.6.1.4.1.207.8.42.8.34.1.11.1
wsAPMacAddressMAC address of an AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.1
wsAPLocationThis object indicates description of an AP, often based on its location.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.2
wsAPModeThis field indicates whether this AP is managed by the controller, by an administrator, or is a Rogue AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.3
wsAPAuthenticationPasswdIf AP authentication is enabled, this indicates the password for an AP to authenticate to the controller. This must match the password configured on an AP. When passwod is configured this object will always return '*****'.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.4
wsUseAPProfileIdIf AP is managed by controller, this object indicates Id of configuration profile for this AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.5
wsAPRadio1ChannelThis object indicates the fixed channel for the AP radio one. Zero indicates automatic channel assignment.ro
Integer32(0..14|36|40|42|44|48|50|52|56|58|60| 64|100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.6
wsAPRadio2ChannelThis object indicates the fixed channel for the AP radio two. Zero indicates automatic channel assignment.ro
Integer32(0..14|36|40|42|44|48|50|52|56|58|60| 64|100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.7
wsAPRadio1TxPowerThis indicates the power setting of AP radio one. Zero indicates automatic power adjustment.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.8
wsAPRadio2TxPowerThis indicates the power setting of AP radio two. Zero indicates automatic power adjustment.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.9
wsAPStandaloneExpectedChannelThis object indicates the expected channel for the AP in standalone mode. Zero indicates that any channel is allowed.ro
Integer32(0..14|36|40|42|44|48|50|52|56|58|60| 64|100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.10
wsAPStandaloneExpectedSecurityThis object indicates the expected security mode for the AP in standalone mode. Zero indicates that any security mode is allowed.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.11
wsAPStandaloneExpectedSsidThis object indicates the expected SSID for the AP in standalone mode. A null string indicates that any SSID is allowed.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.12
wsAPStandaloneExpectedWdsThis object indicates whether the AP is allowed to operate as a bridge. Configurable values are: any Either WDS or normal mode is allowed normal - AP is not allowed to operate in WDS mode bridge - AP is only allowed to operate in WDS modero
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.13
wsAPStandaloneExpectedWiredThis object indicates the expected wired network mode for the AP in standalone mode.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.14
wsAPConfigRowStatusThis object is used to create or delete entries in the table. The supported values are: active(1) - indicates a valid entry createAndGo(4) - creates a new entry in the table destroy(6) - removes an existing entry from the table As this table is indexed by wsAPMacAddress, - to create an entry, specify the AP MAC address and set object value to createAndGo(4) - to delete an entry, select the entry from the list and set object value to destroy(6)ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.1.11.1.15
wsGlobalStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.12
wsIPAddressThis object represents wireless controller IP address. When wireless mode is in disabled state, the value of controller IP address is zero.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.1.12.1
wsOperationalStatusIndicates the current operating status of the wireless system.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.2
wsOperationalStatusDisableReasonThis object indicates the reason of operational status to be disabled. Values 5 and 6 are applicable only if routing functionality present.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.3
wsTotalPeerSwitchesTotal number of peer controllers detected on the network.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.12.4
wsTotalAPsSum of all the WS managed APs, connection failed APs, and discovered APs in the database.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.5
wsTotalManagedAPsTotal number of WS managed APs currently authenticated to the controller.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.12.6
wsTotalStandaloneAPsTotal number of trusted AP's in the standalone mode.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.7
wsTotalDiscoveredAPsNumber of APs that are connected to the controller, but are not completely configured.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.8
wsTotalConnectionFailedAPsNumber of APs that were previously authenticated and managed, but currently do not have connection with the controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.9
wsTotalRogueAPsTotal number of Rogue APs detected on the WLAN.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.10
wsTotalUnknownAPsTotal number of Unknown APs detected on the WLAN.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.11
wsMaximumManagedAPsInPeerGroupMaximum number of APs that can be managed by the wireless controller when it acts as Cluster Controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.12
wsTotalClientsTotal number of clients present in the network.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.13
wsTotalAuthenticatedClientsTotal number of authenticated clients across all APs managed by the controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.14
wsMaximumAssociatedClientsMaximum number of clients that can associate with the wireless system.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.15
wsWLANUtilizationTotal network utilization across all APs managed by this controller. This is based on global statistics.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.12.16
wsGlobalStatusRegulatoryDomainFor2GHzRegulatory domain for 2GHz frequency channels.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.12.18
wsGlobalStatusRegulatoryDomainFor5GHzRegulatory domain for 5GHz frequency channels.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.12.19
wsGlobalPeerConfigRequestActionThis action object is used to: - start - Start the config push into all the peer controllers in the peer group. - Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.20
wsGlobalPeerConfigRequestStatusThe global status for the configuration push operation to one or more peer controllers.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.21
wsGlobalPeerConfigReceiveStatusThe global status when wireless configuration is received from a peer controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.22
wsGlobalPeerConfigSwitchIpIP Address of the last controller from which this controller received any wireless configuration data.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.1.12.23
wsGlobalPeerConfigReceivedIndicates which portions of configuration were last received from a peer controller.ro
Bits
.1.3.6.1.4.1.207.8.42.8.34.1.12.24
wsGlobalPeerConfigReceivedTimestampThe last time this controller received any configuration data from a peer controller.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.1.12.25
wsClusterControllerIndicatorIndicates if the controller is currently the Cluster Controller of the peer group or not.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.26
wsClusterControllerThis object represents Cluster Controller's IP address.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.1.12.27
wsRogueAPMitigationCountNumber of APs to which the wireless system is currently sending de-authentication messages to mitigate against rogue APs.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.28
wsRogueAPMitigationLimitMaximum number of APs for which the system can send de-authentication frames.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.29
wsRogueAPAcknowledgeAllThis is a command that allows the administrator to clear out all rogue AP states in the RF Scan databasero
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.30
wsTotalDetectedClientsTotal number of detected clients across all APs managed by the controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.31
wsMaximumDetectedClientsMaximum number of clients that can be maintained by the detected clients database.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.32
wsMaximumDetectedClientPreAuthenticationHistoryEntriesMaximum number of pre-authentication history entries that can be recorded for all the detected clients present in the detected client database.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.33
wsTotalDetectedClientPreAuthenticationHistoryEntriesTotal number of pre-authentication history entries accumulated for all the detected clients present in the detected client database.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.34
wsMaximumDetectedClientRoamHistoryEntriesMaximum number of roam history entries that can be recorded for all the detected clients present in the detected client database.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.35
wsTotalDetectedClientRoamHistoryEntriesTotal number of roam history entries accumulated for all the detected clients present in the detected client database.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.36
wsRegenerateX509CertificateActionThis action object is used to: - start - Start the certificate regeneration on the controller. - Read on this object will always return none.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.37
wsRegenerateX509CertificateStatusStatus of regenerate X.509 certificates.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.38
wsNetworkMutualAuthenticationStatusStatus of the mutual authentication enable/disable command. When status is Complete With Errors then the administrator may need to provision some controllers or APs separately.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.12.39
wsTotalProvisioningAPsTotal number of APs present in the AP Provisioning database.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.40
wsMaximumProvisioningAPsMaximum number of APs that can be maintained in the AP Provisioning database.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.12.41
wsGlobalStatistics
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.13
wsTotalWLANBytesTransmittedTotal bytes transmitted across all APs managed by this controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.1
wsTotalWLANBytesRecvdTotal bytes received across all APs managed by by this controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.2
wsTotalWLANPktsTransmittedTotal packets transmitted across all APs managed by this controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.3
wsTotalWLANPktsRecvdTotal packets received across all APs managed by this controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.4
wsAllStatisticsResetWhen we set this object to enable, all statistics maintained by controller will be cleared. Read on this object will always return disable.rw
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.13.5
wsAllStatisticsResetStatusThis object indicates the current status of controller statistics reset request. Default value is not started.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.13.6
wsTotalWLANBytesTransmitDroppedTotal bytes dropped in the transmit direction across all APs managed by this controller. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.7
wsTotalWLANBytesRecvDroppedTotal bytes dropped in the receive direction across all APs managed by this controller. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.8
wsTotalWLANPktsTransmitDroppedTotal packets dropped in the transmit direction across all APs managed by this controller. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.9
wsTotalWLANPktsRecvDroppedTotal packets dropped in the receive direction across all APs managed by this controller. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.10
wsTotalWLANDistTunnelPktsTransmittedTotal number of packets transmitted by all APs using distributed tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.13.11
wsTotalWLANDistTunnelRoamedClientsNumber of clients in all APs currently in roaming state using distributed tunnels.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.13.12
wsTotalWLANDistTunnelClientDenialsNumber of client tunnel setups denied for all APs.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.13.13
wsPeerConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.14
wsPeerConfigurationGlobalFlag to enable/disable the functionality to send global configuration parameters to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.1
wsPeerConfigurationDiscoveryFlag to enable/disable the functionality to send discovery configuration parameters to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.2
wsPeerConfigurationAPDatabaseFlag to enable/disable the functionality to send valid AP Database to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.3
wsPeerConfigurationChannelPowerFlag to enable/disable the functionality to send Channel and Power configuration to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.4
wsPeerConfigurationAPProfilesFlag to enable/disable the functionality to send all AP profiles and networks to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.5
wsPeerConfigurationKnownClientsFlag to enable/disable the functionality to send configured known client entries to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.6
wsPeerConfigurationCaptivePortalFlag to enable/disable the functionality to send all Captive Portal configuration to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.7
wsPeerConfigurationRadiusClientFlag to enable/disable the functionality to send RADIUS Client configuration parameters to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.8
wsPeerConfigurationQosAclFlag to enable/disable the functionality to send all QoS ACL configuration to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.9
wsPeerConfigurationQosDiffServFlag to enable/disable the functionality to send all QoS DiffServ configuration to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.10
wsPeerConfigurationWdsGroupFlag to enable/disable the functionality to send configured wds groups to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.11
wsPeerConfigurationDeviceLocationFlag to enable/disable the functionality to send configured device location parameters to a peer controller on a configuration push.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.14.12
wsClusterPriorityPreference level of the controller to become the Cluster Controller of the Peer Group.A priority of 0 means that the controller can not become cluster controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.16
wsAPClientQosModeFlag to globally enable/disable AP quality-of-service operation for wireless clients.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.17
wsAPAutoUpgradeModeFlag to enable/disable AP auto upgrade mode. This object is configurable only if the wireless controller supports both 'Integrated' and 'Independent' AP image download modes. If the controller supports only 'Integrated' mode, the default is Enable.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.18
wsDistTunnelIdleTimeoutTime of inactivity in seconds to wait before terminating a tunnel client.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.19
wsDistTunnelMaxTimeoutTime in seconds to wait before terminating a tunnel client.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.20
wsDistTunnelMaxMcastReplMaximum number of multicast replications that can be performed by the AP.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.21
wsDistTunnelMaxClientsMaximum number of clients that can use tunneled through a Home AP.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.22
wsMACAuthenticationModeThis object indicates whether MAC addresses in the Known Client database are granted or denied access if they are in the list, but dont have a specific action.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.23
wsKnownClientTableThis table contains entries of the known clients.
SEQUENCE OF WsKnownClientEntry
.1.3.6.1.4.1.207.8.42.8.34.1.24
wsKnownClientEntryThe entry contains parameters of a known client.
WsKnownClientEntry
.1.3.6.1.4.1.207.8.42.8.34.1.24.1
wsKnownClientMacAddressMAC address of the known client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.1.24.1.1
wsKnownClientAuthActionThis object indicates whether to grant, deny, or use global action for client authentication.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.24.1.2
wsKnownClientNameDescriptive name of the known client.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.24.1.3
wsKnownClientRowStatusThis object is used to create or delete entries in this table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.1.24.1.4
wsWidsSecurity
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.25
wsWidsApSecurity
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.25.1
rogueAdminConfigReport the AP as rogue in the RF Scan if the local database indicates that the AP is rogue. Can not be disabled.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.1
rogueUnknownApManagedSsidEnable rogue reporting for unknown AP's detected with a managed SSID.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.2
rogueFakeManagedApManagedSsidEnable rogue reporting for fake managed AP's detected with a managed SSID.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.3
rogueManagedApNoSsidEnable rogue reporting of all APs detected with no SSID.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.4
rogueManagedApInvalidChannelEnable rogue reporting of fake managed AP's detected with an invalid channel.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.5
rogueManagedSsidInvalidSecurityEnable rogue reporting of AP's detected with managed SSID's and an invalid security configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.6
rogueManagedApInvalidSsidEnable rogue reporting of managed AP's with an invalid SSID.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.7
rogueApIllegalChannelEnable rogue reporting of AP's operating on an illegal channel.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.8
rogueStandaloneApInvalidConfigEnable rogue reporting of standalone AP's operating with an unexpected configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.9
rogueUnexpectedWdsDeviceEnable rogue reporting of unexpected WDS devices.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.10
rogueUnmanagedApWiredNetworkEnable rogue reporting of unmanaged AP's on a wired network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.11
wiredNetworkDetectionIntervalMinimum number of seconds that the AP waits before starting a new wired network detection cycle. A value of 0 disables wired network detection.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.12
rogueDetectedTrapIntervalThe interval in seconds between transmissions of the trap telling the administrator that Rogues are present in the RF Scan database. A configured value of 0 disables the trap from being sent. .ro
Integer32(0|60..3600)
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.13
apDeauthenticationAttackEnable the AP de-authentication attack.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.1.14
wsWidsClientSecurity
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.25.2
rogueDetectedTrapIntvlThe interval in seconds between transmissions of the trap telling the administrator that Rogues are present in the Rogue Clients are present in the Detected Clients Database. A configured value of 0 disables the trap from being sent.ro
Integer32(0|60..3600)
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.1
knownClientDatabaseTestReport the client as rogue if it fails the Known Client Database Test.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.2
authReqTransmitRateReport the client as rogue if it exceeds configured rate for transmitting 802.11 authentication requests.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.3
probeReqTransmitRateReport the client as rogue if it exceeds configured rate for transmitting probe requests.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.4
deauthReqTransmitRateReport the client as rogue if it exceeds configured rate for transmitting 802.11 deauthentication requests.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.5
maxFailingAuthenticationReport the client as rogue if it exceeds maximum number of failing authentications.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.6
authWithUnknownAPReport the client as rogue if it is authenticated with an unknown AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.7
clientThreatMitigationTransmission of de-authentication messages to known clients associated with unknown APs. The Known Client test must also be enabled in order for the mitigation to take place.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.8
deauthThresholdIntervalNumber of seconds for counting the de-authentication messages.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.9
deauthThresholdValueIf controller receives more than specified de-auth messages during the threshold interval the test triggers the client to be reported as rogue.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.10
authThresholdIntervalNumber of seconds for counting the authentication messages.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.11
authThresholdValueIf controller receives more than specified auth messages during the threshold interval the test triggers the client to be reported as rogue.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.12
probeThresholdIntervalNumber of seconds for counting the probe messages.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.13
probeThresholdValueIf controller receives more than specified probe messages during the threshold interval the test triggers the client to be reported as rogue.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.14
authFailureThresholdThe number of 802.1X authentication failures that triggers the client to be reported as rogue.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.15
knownClientDatabaseLocationThe location of Known Client Database. If the value is local then Known Client Database is located in the local controller. Otherwise the database is located in the RADIUS Server.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.16
knownClientDatabaseRadiusServerNameName of the RADIUS server used for Known Client database This is used when knownClientDatabaseLocation is set to 'radius'.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.17
knownClientDatabaseRadiusServerStatusIndicates whether the specified named RADIUS Authentication server is configured in the RADIUS Client configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.18
notInOUIDatabaseReport the client as rogue if it's OUI is not present in the OUI Database.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.25.2.19
wsGlobalRadiusConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.26
wsRadiusConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.26.1
wsAuthRadiusServerNameName of the RADIUS server used for AP authentications as well as client authentications when a network-level RADIUS server is not defined.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.26.1.1
wsAuthRadiusServerConfiguredStatusIndicates whether the specified named RADIUS Authentication server is configured in the RADIUS Client configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.26.1.2
wsAcctRadiusServerNameName of the RADIUS server used for reporting wireless client associations and disassociations when a network-level RADIUS accounting server is not defined.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.26.1.3
wsAcctRadiusServerConfiguredStatusIndicates whether the specified named RADIUS Accounting server is configured in the RADIUS Client configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.26.1.4
wsRadiusAcctModeFlag to indicate whether or not RADIUS accounting is enabled for wireless clients.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.26.1.5
wsSwitchStatusTableThis table contain access point and client status parameters of peer controllers of wireless controller.
SEQUENCE OF WsSwitchStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.1.27
wsSwitchStatusEntryEach entry describes the access point and client status parameters of each peer of wireless controller.
WsSwitchStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.1.27.1
wsSwitchIPAddressThis object represents wireless controller IP address. When wireless mode is in disabled state, return entry will be none.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.1
wsSwitchClusterPriorityPreference level of the controller to become the Cluster Controller of the Peer Group.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.2
wsSwitchAPImageDownloadModeThe AP image download mode supported by the wireless controller. The displayed mode can be one of the following: Integrated - The controller supports Integrated mode. In this mode, the AP code is located on the controller, and the controller automatically updates the code on APs it manages. Independent - The controller supports Independent mode. In this mode, the AP code is on a TFTP server, and the download is triggered from the cluster controller. Integrated, Independent - The controller supports both modes. Note that this field displays the mode only if wireless controllers that support Independent and Integrated AP Image Download modes co-exist in the network.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.3
wsSwitchTotalAPsSum of all the WS managed APs, connection failed APs, and discovered APs in the database of specified controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.4
wsSwitchManagedAPsTotal number of WS managed APs currently authenticated, configured and have an active connection with the specifed controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.5
wsSwitchDiscoveredAPsNumber of APs that are connected to the specified controller, but have not been completely configured.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.6
wsSwitchConnectionFailedAPsNumber of APs that were previously authenticated and managed, but currently do not have connection with the specified controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.7
wsSwitchMaximumManagedAPsMaximum number of APs that the specified controller can manage.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.8
wsSwitchTotalClientsTotal number of clients in the database that include clients with an associated, authenticated and disassociated status.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.9
wsSwitchAuthenticatedClientsTotal number of authenticated clients across all APs managed by the specified controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.10
wsSwitchWLANUtilizationTotal network utilization across all APs managed by the specifed controller.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.11
wsSwitchDistTunnelClientsNumber of clients that are currently sending and receiving packets via distributed tunnels.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.27.1.12
wsSwitchStatisticsTableThis table contain WLAN statistics for every controller in the peer group. Only Cluster Controller can hold the entries for peer controllers. The controller which is not a Cluster Controller only keep statistics local to it.
SEQUENCE OF WsSwitchStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.1.28
wsSwitchStatisticsEntryEach entry describe WLAN statistics of specified controller in the wireless system.
WsSwitchStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.1.28.1
wsSwitchWLANBytesTransmittedTotal bytes transmitted across all APs managed by the specified controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.1
wsSwitchWLANBytesReceivedTotal bytes received across all APs managed by the specified controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.2
wsSwitchWLANPktsTransmittedTotal packets transmitted across all APs managed by the specified controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.3
wsSwitchWLANPktsReceivedTotal packets received across all APs managed by the specified controller.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.4
wsSwitchWLANBytesTransmitDroppedTotal bytes dropped in the transmit direction across all APs managed by the specified controller. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.5
wsSwitchWLANBytesRecvDroppedTotal bytes dropped in the receive direction across all APs managed the specified controller. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.6
wsSwitchWLANPktsTransmitDroppedTotal packets dropped in the transmit direction across all APs managed by the specified controller. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.7
wsSwitchWLANPktsRecvDroppedTotal packets dropped in the receive direction across all APs managed by the specified controller. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.1.28.1.8
wsAutoIPAssignModeFlag indicating whether the Wireless feature should automatically assign an IP address from one of the active interfaces or whether the IP address is manually assigned.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.29
wsSwitchStaticIPAddressStatically assigned IPv4 address for the Wireless feature. If Auto IP Assignment is true then this setting is ignored.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.1.30
wsGlobalTspecConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.1.31
wsTspecViolationReportIntervalSpecifies the time period at which wireless clients detected as using admission-controlled resources without proper TSPEC authorization are reported via the system logging and SNMP trap mechanisms. If a violating client disassociates before the next report interval, it is reported upon disassociation. This object is specified in seconds, with a default value of 300 (5 minutes). Setting this object value to 0 disables TSPEC violation reporting.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.31.1
networkMutualAuthModeFlag to enable/disable mutual authentication of the Wireless controllers and Access Points in the network.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.32
unmanagedAPReprovisioningFlag to enable/disable reprovisioning of APs when in unmanaged mode.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.33
apProvisionDbAgeTimeTime in hours to wait without hearing any updates for the APs before removing them from the provisioning database.A value of 0 in input range means that the entry never ages out.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.34
switchProvisioningFlag to enable/disable controller provisioning.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.35
wsIpBasePortBase IP port.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.36
devLocMeasurementSysMeasurement system in english/metric.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.37
devLocRfScanLocModeFlag to enable/disable RF Scan location Mode.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.1.38
devLocRfScanLocIntervalNumber of seconds between iterations of triangulation table device location protocol.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.1.39
discovery
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.2
wsIPPollModeFlag to enable/disable IP based discovery of APs and peer controllers.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.2.1
wsL2DiscoveryModeFlag to enable/disable L2 discovery of APs and peer controllers.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.2.2
wsIPPollListTableThis table contains IP addresses to poll on the network.
SEQUENCE OF WsIPPollListEntry
.1.3.6.1.4.1.207.8.42.8.34.2.3
wsIPPollListEntryAn IP address list that can be configured globally on the wireless controller to define which IP addresses to poll in order to discover new APs and peer controllers. This list is used when discovery via IP Polling is enabled.
WsIPPollListEntry
.1.3.6.1.4.1.207.8.42.8.34.2.3.1
wsPollIpAddressIP address of an AP or controller to poll.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.2.3.1.1
wsPollIPStatusIndicates whether or not the controller reached this IP address.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.2.3.1.2
wsIPPollRowStatusThis object is used to create and delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.2.3.1.3
wsL2DiscoveryVlanListTableThis table contains the list of VLANs on which to send L2 discovery multicast packets.
SEQUENCE OF WsL2DiscoveryVlanListEntry
.1.3.6.1.4.1.207.8.42.8.34.2.4
wsL2DiscoveryVlanListEntryA list of VLANs on which to send L2 discovery multicast frames when L2 broadcast discovery mode is enabled. The entries in this table are limited to sixteen. By default there will be one entry in this table with wsL2DiscoveryVlanId equal to one. This entry can neither be created nor deleted.
WsL2DiscoveryVlanListEntry
.1.3.6.1.4.1.207.8.42.8.34.2.4.1
wsL2DiscoveryVlanIdVLAN Id on which controller will send L2 discovery multicast frames.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.2.4.1.1
wsL2DiscoveryVlanRowStatusThis variable is used to create and delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.2.4.1.2
wsIPPollListMaxNumOfEntriesMaximum number of IP discovery entries allowed to be configured.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.2.5
wsIPPollListNumOfConfigEntriesTotal number of entries configured IP discovery entries.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.2.6
wsIPPollListNumOfPolledEntriesTotal number of polled entries in the IP discovery list.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.2.7
wsIPPollListNumOfNotPolledEntriesTotal number of not-polled entries in the IP discovery list.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.2.8
wsIPPollListNumOfDiscoveredEntriesTotal number of discovered entries in the IP discovery list.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.2.9
wsIPPollListNumOfDiscoveredFailedEntriesTotal number of discovered-failed entries in the IP discovery list.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.2.10
apProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.3
wsAPProfileTableThe following parameters can be configured within an AP configuration profile. A profile is used to replicate a single AP configuration across multiple managed APs. Modification or deletion is not allowed if the profile is assigned to one or more managed APs except wsCopyAPProfileToProfileId.
SEQUENCE OF WsAPProfileEntry
.1.3.6.1.4.1.207.8.42.8.34.3.1
wsAPProfileEntryEach entry has parameters that can be configured within an AP configuration profile. A profile is used to replicate a single AP configuration across multiple managed APs, and is indexed by an integer Id.
WsAPProfileEntry
.1.3.6.1.4.1.207.8.42.8.34.3.1.1
wsAPProfileIdUnique AP Profile Id for each entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.1
wsAPProfileNameAP configuration profile name.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.2
wsAPProfileStateIndicates current state of AP Profile.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.3
wsAPProfileRowStatusThis object is used to create or delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.8
wsCopyAPProfileToProfileIdThis object copies the AP profile configuration to the specified valid AP Profile Id. If specified Profile Id is already assigned to one or more managed APs, the operation is not allowed. Read on this object will always return zero.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.9
wsAPProfileApplyThis object is used to apply the AP profile configuration. Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.10
wsAPHardwareTypeIDAP Hardware type ID associated with each entry.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.11
wsAPWiredDetectionVlanIdVLAN ID that is used to send packets on the wire that enable the system to discover rogue APs attached to the wired network.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.12
wsAPProfileDisconnAPFwdingModeFlag to enable/disable Disconnected AP Data Forwarding Mode.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.13
wsAPProfileDisconnAPMgmtModeFlag to enable/disable Disconnected AP Management Mode.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.14
wsAPProfileAeroScoutSupportModeFlag to enable/disable AE Protocol Support Mode.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.1.1.15
wsAPProfileRadioTableThis table contains parameters that can be configured with in an AP Profile per radio interface.
SEQUENCE OF WsAPProfileRadioEntry
.1.3.6.1.4.1.207.8.42.8.34.3.3
wsAPProfileRadioEntryEach entry in this table represents parameters that can be configured with in an AP profile per radio interface. Two entries in this table will get created automatically for each AP profile being created in wsAPProfileTable. Whenever AP profile entry is deleted, corresponding radio profile entries will get deleted automatically.
WsAPProfileRadioEntry
.1.3.6.1.4.1.207.8.42.8.34.3.3.1
wsAPRadioInterfaceAP physical radio interface number.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.1
wsAPRadioAdminModeFlag to indicate whether the radio is operational.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.2
wsAPRadioFrequencyIndicates which physical layer technology to use on radio. Default value for radio 1 is 'ieee802dot11bgn' and default value for radio 2 is 'ieee802dot11an'.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.3
wsAPRadioOtherChannelsScanModeWhen Sentry mode is disabled this flag controls whether the radio moves away from the operating channel while doing scans. When this mode is disabled the radio scans only on the operating channel. When sentry mode is enabled on the radio this parameter is ignored.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.4
wsAPRadioOtherChannelsScanIntervalIf scan mode is enable, indicates how often the radio leaves its operational channel.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.5
wsAPRadioSentryScanModeWhen Sentry mode is enabled the radio doesn't do any data forwarding, but only periodically scan channels for rogues. The length of time spent on each channels controlled by the 'scan duration' time.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.6
wsAPRadioSentryScanChannelIf scanning is enabled, this object indicates on which frequencies to scan.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.7
wsAPRadioScanDurationIndicates how long the radio can scan before returning to its operational channel. The default value is 10ms.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.8
wsAPRadioRateLimitModeThis object enables/disables rate limit for broadcast and multicast traffic transmitted across the network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.9
wsAPRadioRateLimitAllowed rate limit for broadcast/multicast traffic transmitted across the network. Broadcast/multicast traffic below this limit is transmitted normally.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.10
wsAPRadioRateLimitBurstBroadcast/multicast traffic can occur in bursts up to this value before all traffic is considered to exceed the limit.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.11
wsAPRadioBeaconIntervalInterval at which the AP transmit beacon frames.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.12
wsAPRadioDTIMPeriodIndicates the number of beacons between Delivery Traffic Indication MAP(DTIM). DTIM indicates buffered broadcast/multicast traffic on an AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.13
wsAPRadioFragmentationThresholdThis object limits the size of packets transmitted over the network. Only even values are allowed in the defined range.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.14
wsAPRadioRTSThresholdThis object indicates the number of octets in an MAC Protocol Data Unit(MPDU), below which an request to send(RTS)/clear to send(CTS) handshake shall not be performed.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.15
wsAPRadioShortRetryLimitThis object indicates the maximum number of transmission attempts on frame sizes less than or equal to the RTS threshold. Set action for this object will be supported in next release.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.16
wsAPRadioLongRetryLimitThis object indicates the maximum number of transmission attempts on frame sizes greater than the RTS threshold. Set action for this object will be supported in next release.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.17
wsAPRadioMaxTransmitLifetimeThis object indicates the elapsed time after the initial transmission of MAC Service Data Unit(MSDU), after which further attempts to transmit the MSDU shall be terminated. Set action for this object will be supported in next release.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.18
wsAPRadioMaxReceiveLifetimeThis object indicates the elapsed time after the initial reception of a fragmented MAC Management Protocol Data Unit(MMPDU) or MSDU, after which further attempts to reassemble the MMPDU or MSDU shall be terminated. Set action for this object will be supported in next release.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.19
wsAPRadioMaxClientsMaximum number of client stations that can simultaneously get associated on this interface.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.20
wsAPRadioAutoPowerModeFlag to indicate power is automatically adjusted by the controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.21
wsAPRadioTxPowerIf auto power mode is disabled, this object indicates a fixed power setting for the radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.22
wsAPRadioWMMModeFlag to enable/disable Wi-Fi MultiMedia Mode. When enabled, QOS settings affect both downstream traffic to the sation and upstream traffic to the AP. When disabled, QOS only applies to downstream traffic.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.23
wsAPRadioLoadBalancingModeFlag to indicate that AP will load balance users on this radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.24
wsAPRadioUtilizationIf load balancing is enabled, percentage of network utilization allowed on the radio before clients are denied. This value is displayed in percentage.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.25
wsAPRadioAutoChannelModeFlag to indicate whether initial AP radio channel assignment can be automatically adjusted by controller due to changes in radio performance.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.26
wsAPRadioStationIsolationModeFlag to indicate whether Station Isolation is enabled on the Radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.27
wsAPRadioChannelBandwidthBandwidth used in the channel.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.28
wsAPRadioPrimaryChannelSpecify relative location of Primary Channel in the 40 MHz channel.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.29
wsAPRadioProtectionModeTurn on/off Protection mechanisms.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.30
wsAPRadioShortGuardIntervalDead time, in nanoseconds, between OFDM symbols which prevents Inter-Symbol and Inter-Carrier Interference (ISI, ICI). The short guard interval, when enabled, is 400ns and the standard guard interval, when disabled, is 800ns.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.31
wsAPRadioSTBCModeThe Space Time Block Code (STBC) Mode enables the AP to send the same data stream on multiple antennas at the same time. This is different from MIMO where the data stream is divided between two antennas.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.32
wsAPRadioMulticastTxRateIndicates the data rate AP will send multicast data to its client stations represented by a count from 2 - 127, corresponding to data rates in multiples of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s. 0 represents automatic rate selection. For Example : Supported Data Rate Mbps 2 1 4 2 11 5.5 12 6 18 9 and so on.ro
Integer32(0|2..127)
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.33
wsAPRadioAPSDModeAutomatic Power Save Delivery Mode.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.34
wsAPRadioNoAckModeDon't send acknowledgement to correctly received frames.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.35
wsAPRadioResourceMeasEnabledFlag to enable/disable Radio Resource Management (RRM) as defined in the IEEE 802.11k specification. RRM allows wireless clients to request adjustments and report conditions regarding channel load and neighbor detection.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.36
wsAPRadioQOSEDCATemplateThis object indicates the QOS template choice in effect for the profile and radio.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.37
wsAPRadioMinTxPowerMinimum Transmit Power that can be set by APA on the radio. Default Value is 20% for 2.4Ghz Radio and 100% for 5Ghz radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.3.1.38
wsAPProfileRadioSupportedRatesTableThis table represents the supported data rates by AP Profile.
SEQUENCE OF WsAPProfileRadioSupportedRatesEntry
.1.3.6.1.4.1.207.8.42.8.34.3.4
wsAPProfileRadioSupportedRatesEntryEach entry in this table represents supported data rate.
WsAPProfileRadioSupportedRatesEntry
.1.3.6.1.4.1.207.8.42.8.34.3.4.1
wsSupportedDataRateIndicates the data rate, AP will actually support in setting up communications with client stations represented by a count from 2 - 127, corresponding to data rates in multiples of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s. Supported Data Rate Mbps 2 1 4 2 11 5.5 12 6 18 9 and so on.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.4.1.1
wsAPProfileRadioSupportedDataModeDisplays supported data rate by an AP Profile. Supported rates by an AP Profile depends on physical mode of the radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.4.1.2
wsAPProfileRadioBasicRatesTableThis table represents the basic data rates advertised by an AP Profile.Stations connecting to this AP must support this set of data rates.
SEQUENCE OF WsAPProfileRadioBasicRatesEntry
.1.3.6.1.4.1.207.8.42.8.34.3.5
wsAPProfileRadioBasicRatesEntryEach entry in this table represents basic data rate.
WsAPProfileRadioBasicRatesEntry
.1.3.6.1.4.1.207.8.42.8.34.3.5.1
wsBasicDataRateIndicates the basic data rate, AP will actually advertise to its client stations represented by a count from 2 - 127, corresponding to data rates in multiples of 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s. For Example : Supported Data Rate Mbps 2 1 4 2 11 5.5 12 6 18 9 and so on.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.5.1.1
wsAPProfileRadioBasicDataModeDisplays basic data rate advertised by an AP Profile. Basic rate depends on physical mode of the radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.5.1.2
wsAPProfileVAPTableThis table is about VAP profile configuration. When AP profile entry is created, corresponding eight VAP entries will get created for each radio. When AP Profile entry is get deleted, corresponding VAP entries will be deleted automatically.
SEQUENCE OF WsAPProfileVAPEntry
.1.3.6.1.4.1.207.8.42.8.34.3.6
wsAPProfileVAPEntryEach entry in this table represents VAP profile.
WsAPProfileVAPEntry
.1.3.6.1.4.1.207.8.42.8.34.3.6.1
wsVAPIdIndex of the VAP with respect to the radio interface.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.6.1.1
wsVAPModeFlag to enable/disable VAP. VAP0 can not be disabled. In order to disable VAP0, radio must be turned off.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.6.1.2
wsVAPNetworkIdNetwork configuration assigned to the VAP. By default, VAP 0 to 7 are assigned to Network Ids 1 to 8 in order.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.6.1.3
wsAPProfileQOSTableThis table displays QOS configuration. Enhanced Distributed Channel Access(EDCA) parameters of an AP affect downstream traffic from AP to the client station. Station EDCA parameters affect upstream traffic from the client station to an AP. Creation of AP Profile creates corresponding four qos profiles with default values for each radio. Deletion of AP Profile deletes the corresponding QOS entries in this table.
SEQUENCE OF WsAPProfileQOSEntry
.1.3.6.1.4.1.207.8.42.8.34.3.7
wsAPProfileQOSEntryEach entry in this table represents QOS profile.
WsAPProfileQOSEntry
.1.3.6.1.4.1.207.8.42.8.34.3.7.1
wsQOSQueueIdThis object indicates QOS Queue Id.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.1
wsAPEDCAAIFSSpecifies the wait time for data frames. The default values for each QOS Id is mentioned below: voice(0) - 1 msec video(1) - 1 msec besteffort(2) - 3 msec background(3) - 7 msecro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.2
wsAPEDCAMinContentionWindowSpecifies the upper limit of a range from which the initial random backoff wait time is determined. The default values for each QOS Id is mentioned below: voice(0) - 3 msec video(1) - 7 msec besteffort(2) - 15 msec background(3) - 15 msecro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.3
wsAPEDCAMaxContentionWindowSpecifies the upper limit for the doubling of the random backoff value, doubling continues until either the data frame is sent or this value is reached. The default values for each QOS Id is mentioned below: voice(0) - 7 msec video(1) - 15 msec besteffort(2) - 63 msec background(3) - 1023 msecro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.4
wsAPEDCAMaxBurstSpecifies the maximum burst length allowed for packet bursts on the wireless network. The default values for each QOS Id is mentioned below: voice(0) - 1500 micro sec video(1) - 3000 micro sec besteffort(2) - 0 micro sec background(3) - 0 micro secro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.5
wsStationEDCAAIFSSpecifies the wait time for data frames. The default values for each QOS Id is mentioned below: voice(0) - 2 msec video(1) - 2 msec besteffort(2) - 3 msec background(3) - 7 msecro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.6
wsStationEDCAMinContentionWindowSpecifies the upper limit of a range from which the initial random backoff wait time is determined for station. The default values for each QOS Id is mentioned below: voice(0) - 3 msec video(1) - 7 msec besteffort(2) - 15 msec background(3) - 15 msecro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.7
wsStationEDCAMaxContentionWindowSpecifies the upper limit for the doubling of the random backoff value, doubling continues until either the data frame is sent or this value is reached. The default values for each QOS Id is mentioned below: voice(0) - 7 msec video(1) - 15 msec besteffort(2) - 63 msec background(3) - 1023 msecro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.8
wsStationEDCATXOPLimitSpecifies an interval of the time when a Wireless Multimedia Extensions(WME) client station has the right to initiate transmissions on to the wireless medium. The default values for each QOS Id is mentioned below: voice(0) - 47 msec video(1) - 94 msec besteffort(2) - 0 msec background(3) - 0 msecro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.7.1.9
wsNetworkTableThe following parameters can be configured for each network. A network may be assigned to one or more VAPs within an AP configuration profile. The first eight networks are created with default values, and cannot be deleted.
SEQUENCE OF WsNetworkEntry
.1.3.6.1.4.1.207.8.42.8.34.3.8
wsNetworkEntryEach entry in this table is associated with a unique network Id.
WsNetworkEntry
.1.3.6.1.4.1.207.8.42.8.34.3.8.1
wsNetworkIdNetwork Id used to uniquely identify the network.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.1
wsNetworkIdRowStatusAdd Network ID to the network configuration table. The first 16 network configurations are created by default, they are applied to VAP-0 through VAP-15 in order on each radio when a new AP configuration profile is created (one default network configuration exists per VAP ID).ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.2
wsNetworkSSIDThis object indicates Service Set ID specific to this Network. The first network is configured with a default SSID 'Guest Network', the rest of the networks have default SSIDs assigned based on the Network Id.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.3
wsNetworkDefaultVLANIdDefault VLAN Id assigned to the Network. The default VLAN is used if RADIUS based authentication is not configured for the network or the RADIUS server does not return a VLAN for a specific client.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.4
wsNetworkHideSSIDModeFlag to enable/disable inclusion of SSID in AP beacons.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.5
wsNetworkDenyBcastModeIf client broadcasts probe requests to all available SSIDs this option controls whether or not the system will respond to the probe request. The 'disable' mode means that the system responds.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.6
wsNetworkMACAuthenticationModeThis object indicates mode to disable, or enable and specify lookup method for authentication via client MAC address.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.10
wsNetworkRadiusAccountingModeFlag to enable/disable RADIUS accounting authentication for users on this network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.14
wsNetworkSecurityModeSpecifies authentication and encryption mode on this network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.15
wsNetworkWPAVersionsSupportedIf Wi-Fi Protected Access(WPA) encryption mode is enabled, this object indicates the versions of WPA allowed by clients on this network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.16
wsNetworkWPACipherSuitesIf WPA encryption mode is enabled, this object indicates which encryption solutions to use for WPA clients.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.17
wsNetworkWPAKeyTypeIf WPA-SharedKey security mode is enabled, this object specifies the type of the WPA key configured. Only ascii key type is supported for this release.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.18
wsNetworkWPAKeyIf WPA-SharedKey security mode is enabled, this object specifies the pre-shared secret for WPA clients. For ASCII - 8-63 characters.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.19
wsNetworkWPA2PreAuthenticationModeIf WPA2 encryption is enabled, flag to enable/disable pre-authentication support for roaming WPA2 clients.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.20
wsNetworkWPA2PreAuthenticationLimitIf WPA2 pre-authentication is enabled, this object specifies a limit on the number of APs within the peer group to which one client is allowed to be pre-authenticate.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.21
wsNetworkWPA2RoambackKeyCacheHoldtimeLength of time in minutes a PMK will be cached by an AP after the client using this PMK has roamed away from this AP. Length of time a PMK will be cached by an AP after the PMK has been received from the WS. After this time has expired, the AP deletes the PMK entry from the security database.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.23
wsNetworkStaticWEPAuthenticationModeIndicates security configuration for static WEP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.24
wsNetworkUseWEPTransferKeyIndexIf wsNetSecurityMode is wepSharedKey, this object indicates which Wired Equivalent Privacy(WEP) algorithm network will use for encryption.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.25
wsNetworkWEPKeyTypeIf WEP-SharedKey security mode is enabled, this object specifies the type WEP key configured.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.26
wsNetworkWEPKeyLengthIf WEP-SharedKey security mode is enabled, this object specifies number of bits for the WEP key.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.27
wsNetworkWEPKey1If WEP-SharedKey security mode is enabled, this object specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 characters ASCII/128 - 13 characters HEX/64 - 10 characters HEX/128 - 26 charactersro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.28
wsNetworkWEPKey2If WEP-SharedKey security mode is enabled, this object specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 characters ASCII/128 - 13 characters HEX/64 - 10 characters HEX/128 - 26 charactersro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.29
wsNetworkWEPKey3If WEP-SharedKey security mode is enabled, specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 characters ASCII/128 - 13 characters HEX/64 - 10 characters HEX/128 - 26 charactersro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.30
wsNetworkWEPKey4If WEP-SharedKey security mode is enabled, this object specifies the key for WEP clients. Minimum characters required for key based on key type/length are: For ASCII/64 - 5 characters ASCII/128 - 13 characters HEX/64 - 10 characters HEX/128 - 26 charactersro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.31
wsClearNetworkEntryThis is an action object. Setting this object to enable will set Network Id configuration to default configuration. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.33
wsNetworkRedirectModeSpecifies the redirect mode on this network.deprecated
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.34
wsNetworkRedirectURLThis object indicates HTTP Redirect URL on the Network Id.deprecated
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.35
wsIfNumberA unique value to identify the wireless network interface.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.36
wsNetworkAuthRadiusServerNameThe name of the RADIUS server used for client authentications.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.37
wsNetworkAuthRadiusServerConfiguredStatusIndicates whether the specified named RADIUS Authentication server is configured in the RADIUS Client configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.38
wsNetworkAcctRadiusServerNameThe name of the RADIUS server used for reporting wireless client associations and disassociations.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.39
wsNetworkAcctRadiusServerConfiguredStatusIndicates whether the specified named RADIUS Accounting server is configured in the RADIUS Client configuration.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.40
wsUseNetworkRadiusConfigThis flag controls whether the VAP uses the network RADIUS configuration or global RADIUS configuration. When enabled, network RADIUS configuration shall be used.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.41
wsNetworkDistTunnelModeFlag to enable/disable Distributed Tunneling for this Network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.42
wsNetworkBcastKeyRefreshRateThe 802.1x broadcastkey refresh rate command specifies the interval after which the broadcast keys are changed.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.43
wsNetworkSessionKeyRefreshRateThe 802.1x SessionKey refresh rate command specifies the interval after which the Unicast session keys are changed. This is applicable only dynamic WEP and WPA Enterprise modes.Valid values are 0 and from 30-86400.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.44
wsNetworkARPSuppressionModeFlag to enable/disable Wireless ARP Suppression for this Network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.45
wsNetworkBandSteerModeConfigure band steering on this VAP. To have band steering operationally enabled, the following conditions should be met: 1. SSIDs on both VAPs should match. 2. One radio should be in the 2.4-GHz band, and the other should be in the 5-GHz band.rw
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.8.1.46
wsNetworkClientQosTableThe following parameters can be configured for each network. This table extends the wsNetworkTable definition.
SEQUENCE OF WsNetworkClientQosEntry
.1.3.6.1.4.1.207.8.42.8.34.3.9
wsNetworkClientQosEntryEach entry in this table is associated with a unique network ID, and defines its default client QoS parameters for a managed AP. These parameters are used for any wireless client on the designated network that does not have its own comparable parameter(s) defined via RADIUS when using 802.1X authentication.
WsNetworkClientQosEntry
.1.3.6.1.4.1.207.8.42.8.34.3.9.1
wsNetworkClientQosBandwidthLimitDownMaximum bandwidth rate allowed for the wireless down (outbound) direction from AP to client for this network, thus controlling the maximum receive rate from the AP for a wireless client. This parameter is specified in bits-per-second (bps). This object may be set to any value in the range 0-4294967295. Any configured non-zero value is rounded down to the nearest 64000 bps by the AP, but no lower than 64000. Setting this object value to 0 disables bandwidth limiting in this direction.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.1
wsNetworkClientQosBandwidthLimitUpMaximum bandwidth rate allowed for the wireless up (inbound) direction from client to AP for this network, thus controlling the maximum send rate to the AP for a wireless client. This parameter is specified in bits-per-second (bps). This object may be set to any value in the range 0-4294967295. Any configured non-zero value is rounded down to the nearest 64000 bps by the AP, but no lower than 64000. Setting this object value to 0 disables bandwidth limiting in this direction.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.2
wsNetworkClientQosAccessControlDownTypeAccess list type used for the wireless down (outbound) direction from AP to client for this network. Setting this object usually requires that the wsNetworkClientQosAccessControlDownName object also be set at the same time (see the 'Object set restrictions' in that object's description for more information).
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.3
wsNetworkClientQosAccessControlDownNameName of the access list to use in accordance with the wsNetworkClientQosAccessControlDownType as follows: none(1) - This object is not used and must not be set. ip(2) - This specifies an IP access list number in the range 1-199, entered as a character string rather than an integer, or an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IP access list, as defined by the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are specified here using a character string notation instead of an integer value. Object set restrictions: ------------------------ 1. When setting wsNetworkClientQosAccessControlDownType to none(0), this object must not be set. 2. When setting wsNetworkClientQosAccessControlDownType to any value other than none(0), both the wsNetworkClientQosAccessControlDownType and this object must be set at the same time (i.e. use multiple variable bindings). 3. This object may be set by itself in accordance with the existing wsNetworkClientQosAccessControlDownType value, provided the type value is anything other than none(0).
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.4
wsNetworkClientQosAccessControlUpTypeAccess list type used for the wireless up (inbound) direction from client to AP for this network. Setting this object usually requires that the wsNetworkClientQosAccessControlUpName object also be set at the same time (see the 'Object set restrictions' in that object's description for more information).
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.5
wsNetworkClientQosAccessControlUpNameName of the access list to use in accordance with the wsNetworkClientQosAccessControlUpType as follows: none(1) - This object is not used and must not be set. ip(2) - This specifies an IP access list number in the range 1-199, entered as a character string rather than an integer, or an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IP access list, as defined by the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are specified here using a character string notation instead of an integer value. Object set restrictions: ------------------------ 1. When setting wsNetworkClientQosAccessControlUpType to none(0), this object must not be set. 2. When setting wsNetworkClientQosAccessControlUpType to any value other than none(0), both the wsNetworkClientQosAccessControlUpType and this object must be set at the same time (i.e. use multiple variable bindings). 3. This object may be set by itself in accordance with the existing wsNetworkClientQosAccessControlUpType value, provided the type value is anything other than none(0).
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.6
wsNetworkClientQosDiffservPolicyDownTypeDiffServ policy type used for the wireless down (outbound) direction from AP to client for this network. Setting this object usually requires that the wsNetworkClientQosDiffservPolicyDownName object also be set at the same time (see the 'Object set restrictions' in that object's description for more information). Only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.7
wsNetworkClientQosDiffservPolicyDownNameName of the DiffServ policy to use in accordance with the wsNetworkClientQosDiffservPolicyDownType as follows: none(1) - This object is not used and must not be set. in(2) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation. Object set restrictions: ------------------------ 1. When setting wsNetworkClientQosDiffservPolicyDownType to none(0), this object must not be set. 2. When setting wsNetworkClientQosDiffservPolicyDownType to any value other than none(0), both the wsNetworkClientQosDiffservPolicyDownType and this object must be set at the same time (i.e. use multiple variable bindings). 3. This object may be set by itself in accordance with the existing wsNetworkClientQosDiffservPolicyDownType value, provided the type value is anything other than none(0).
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.8
wsNetworkClientQosDiffservPolicyUpTypeDiffServ policy type used for the wireless up (inbound) direction from client to AP for this network. Setting this object usually requires that the wsNetworkClientQosDiffservPolicyUpName object also be set at the same time (see the 'Object set restrictions' in that object's description for more information). Only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.9
wsNetworkClientQosDiffservPolicyUpNameName of the DiffServ policy to use in accordance with the wsNetworkClientQosDiffservPolicyUpType as follows: none(1) - This object is not used and must not be set. in(2) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation. Object set restrictions: ------------------------ 1. When setting wsNetworkClientQosDiffservPolicyUpType to none(0), this object must not be set. 2. When setting wsNetworkClientQosDiffservPolicyUpType to any value other than none(0), both the wsNetworkClientQosDiffservPolicyUpType and this object must be set at the same time (i.e. use multiple variable bindings). 3. This object may be set by itself in accordance with the existing wsNetworkClientQosDiffservPolicyUpType value, provided the type value is anything other than none(0).
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.10
wsNetworkClientQosModeFlag to enable/disable AP quality-of-service for wireless clients on this network.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.9.1.11
wsAPProfileRadioSupportedChannelsTableThis table represents the supported channels by AP Profile.
SEQUENCE OF WsAPProfileRadioSupportedChannelsEntry
.1.3.6.1.4.1.207.8.42.8.34.3.10
wsAPProfileRadioSupportedChannelsEntryEach entry in this table represents a supported channel.
WsAPProfileRadioSupportedChannelsEntry
.1.3.6.1.4.1.207.8.42.8.34.3.10.1
wsSupportedChannelIndicates a channel currently supported by the radio for use with client connections. The set of supported channel numbers is determined by country code, radio mode, and in the case of modes that are compatible with 802.11n, primary channel selection and channel bandwidth settings.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.10.1.1
wsAPProfileRadioEligibleChannelsTableThis table represents the channels of an AP profile that are eligible for automatic channel selection.
SEQUENCE OF WsAPProfileRadioEligibleChannelsEntry
.1.3.6.1.4.1.207.8.42.8.34.3.11
wsAPProfileRadioEligibleChannelsEntryEach entry in this table represents an eligible channel.
WsAPProfileRadioEligibleChannelsEntry
.1.3.6.1.4.1.207.8.42.8.34.3.11.1
wsEligibleChannelIndicates a channel currently eligible for automatic channel selection by the radio for use with client connections. The set of eligible channel numbers is a subset of the channels supported by the radio in its current configuration of country, mode, and in the case of modes that are compatible with 802.11n, primary channel selection and channel bandwidth settings. For 80Mhz 4 channels form a set and setting one channel would unset all the remaining channels in the set. Deleting one channel would unset all the channels in the set.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.3.11.1.1
wsEligibleChannelRowStatusThe eligible channel status. Supported values: active(1) - valid instance createAndGo(4) - creates a new instance destroy(6) - removes an instancero
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.3.11.1.2
wsAPProfileRadioTspecTableThis table contains TSPEC parameters that can be configured within an AP Profile per radio interface.
SEQUENCE OF WsAPProfileRadioTspecEntry
.1.3.6.1.4.1.207.8.42.8.34.3.12
wsAPProfileRadioTspecEntryEach entry in this table represents TSPEC parameters that can be configured per radio interface within an AP profile. These entries augment the wsAPProfileRadioEntry definition for TSPEC configuration.
WsAPProfileRadioTspecEntry
.1.3.6.1.4.1.207.8.42.8.34.3.12.1
wsAPRadioTspecModeThe overall TSPEC operational mode for this radio. This object must be set to enable(1) for any of the other TSPEC ACM configuration parameters defined in this table row to have an effect. The default value for this object is disable(2).
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.1
wsAPRadioTspecVoiceAcmModeRegulates mandatory admission control for the voice access category (AC). When set to enable(1), the voice AC may only be used by WMM-compliant client stations that have successfully established a TSPEC for this AC. Note that setting the wsAPRadioTspecLegacyWmmQueueMapMode object to enable(1) overrides the exclusive use of the voice AC by allowing legacy (i.e. non-WMM-compliant) client stations to use it as well.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.2
wsAPRadioTspecVideoAcmModeRegulates mandatory admission control for the video access category (AC). When set to enable(1), the video AC may only be used by WMM-compliant client stations that have successfully established a TSPEC for this AC. Note that setting the wsAPRadioTspecLegacyWmmQueueMapMode object to enable(1) overrides the exclusive use of the video AC by allowing legacy (i.e. non-WMM-compliant) client stations to use it as well.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.3
wsAPRadioTspecVoiceAcmLimitDefines the maximum amount of wireless bandwidth utilization to admit for the voice access category. TSPEC requests that would cause this limit to be exceeded are rejected. Note that this value establishes an upper limit for wireless bandwidth to be admitted for this access category but does not guarantee that this limit can be reached. Setting this object value to 0 and the wsAPRadioTspecVoiceAcmMode object to enable(1) causes all TSPEC requests to be rejected by the AP for the voice access category. The sum of this value and the wsAPRadioTspecVideoAcmLimit object value is not allowed to exceed 70. This value is treated as a percentage.
Unsigned32(0|1..70)
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.4
wsAPRadioTspecVideoAcmLimitDefines the maximum amount of wireless bandwidth utilization to admit for the video access category. TSPEC requests that would cause this limit to be exceeded are rejected. Note that this value establishes an upper limit for wireless bandwidth to be admitted for this access category but does not guarantee that this limit can be reached. Setting this object value to 0 and the wsAPRadioTspecVideoAcmMode object to enable(1) causes all TSPEC requests to be rejected by the AP for the video access category. The sum of this value and the wsAPRadioTspecVoiceAcmLimit object value is not allowed to exceed 70. This value is treated as a percentage.
Unsigned32(0|1..70)
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.5
wsAPRadioTspecRoamReserveLimitDefines the portion of the wsAPRadioTspecVoiceAcmLimit and wsAPRadioTspecVideoAcmLimit object values to hold in reserve for roaming clients only. If this value exceeds the current value in either of those two objects, respectively, then their entire ACM limit is used exclusively for roaming clients. Setting this object value to 0 causes none of the voice or video ACM limit values to be reserved for roaming clients - they compete equally with non-roaming clients for wireless network bandwidth. This value is treated as a percentage.
Unsigned32(0|1..70)
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.6
wsAPRadioTspecApInactivityTimeoutSpecifies the amount of time that an active traffic stream (TS) in the downlink direction may be idle, from the perspective of the AP, before it is deleted by the AP. For a bidirectional TS, both the wsAPRadioTspecApInactivityTimeout and the wsAPRadioTspecStaInactivityTimeout must expire in order for the TS to be deleted by the AP due to inactivity. If either of these timeouts is disabled, the AP will not delete a bidirectional TS due to inactivity. This value is specified in seconds. Setting this object value to 0 disables this timeout.
Unsigned32(0|1..120)
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.7
wsAPRadioTspecStaInactivityTimeoutSpecifies the amount of time that an active traffic stream (TS) in the uplink direction may be idle, from the perspective of the AP, before it is deleted by the AP. For a bidirectional TS, both the wsAPRadioTspecApInactivityTimeout and the wsAPRadioTspecStaInactivityTimeout must expire in order for the TS to be deleted by the AP due to inactivity. If either of these timeouts is disabled, the AP will not delete a bidirectional TS due to inactivity. This value is specified in seconds. Setting this object value to 0 disables this timeout.
Unsigned32(0|1..120)
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.8
wsAPRadioTspecLegacyWmmQueueMapModeWhen enabled, the AP allows intermixing of legacy traffic with Wi-Fi Multimedia (WMM) traffic on access category queues that are operating according to admission control mandatory (ACM) rules. This mode is intended for use with non Wi-Fi Multimedia Enabled (non-WME) clients and is disabled by default. When this object is set to enable(1), both the voice and video access categories are accessible by wireless clients that do not have an admitted TSPEC, which can lead to underestimation of the available medium time by wireless TSPEC admission control. Use caution when enabling this mode and also consider using very small ACM limit values as well.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.12.1.9
wsAPProfileRadioMCSIndexTableThis table contains MCS indices that can be configured within an AP Profile per radio interface.obsolete
SEQUENCE OF WsAPProfileRadioMCSIndexEntry
.1.3.6.1.4.1.207.8.42.8.34.3.13
wsAPProfileRadioMCSIndexEntryEach entry in this table represents an MCS index that can be configured per radio interface within an AP profile.obsolete
WsAPProfileRadioMCSIndexEntry
.1.3.6.1.4.1.207.8.42.8.34.3.13.1
wsAPRadioMCSIndexValueIndicates an index value available for use with the Modulation and Coding Scheme (MCS) for 802.11n connections. Not all radios support index values from 16 to 23.roobsolete
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.3.13.1.1
wsAPRadioMCSIndexAvailableIndicates that the associated index value has or has not been configured for use with the Modulation and Coding Scheme (MCS) for 802.11n connections.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.3.13.1.2
apCodeDownload
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.4
wsAPCodeDownloadServerIPIndicates the server IP address to use for an AP code download request.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.4.1
wsAPImageTypeFileTableThe AP image type capability table contain parameters that are configurable for each image type download.
SEQUENCE OF WsAPImageTypeFileEntry
.1.3.6.1.4.1.207.8.42.8.34.4.2
wsAPImageTypeFileEntryEach entry provides image type capability details for each AP image type supported by the WS.
WsAPImageTypeFileEntry
.1.3.6.1.4.1.207.8.42.8.34.4.2.1
wsAPImageFilePathIndicates the file path on the server to use for an AP code download request.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.4.2.1.1
wsAPImageFileNameIndicates file on the server to use for an AP code download request.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.4.2.1.2
wsAPCodeDownloadMACAddressIndicates an AP MAC address to use in a code download request for a single AP. MAC address zero indicates the code download request is for all managed APs. Setting this object initiates the code download. A read on this object always returns zero.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.4.3
wsAPCodeDownloadGroupSizeIndicates the number of APs the wireless controller will issue a code download request to at one time.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.4.4
wsAPCodeDownloadImageTypeIndicates which image to download to the AP(s). Configurable values are: - tq3600, if download is for APs with hardware that only require tq3600 code - image2, reserved future - image3, reserved future - tq2450, if download is for APs with hardware that only require tq2450 code - tq4400, if download is for APs with hardware that only require tq4400 code - tq4600, if download is for APs with hardware that only require tq4600 code - tq3200, if download is for APs with hardware that only require tq3200 code - tq3400, if download is for APs with hardware that only require tq3400 code - all, if download involves APs that require tq3600, tq2450, tq4400, tq4600, tq3200, and tq3400 codero
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.4.5
wsAPCodeDownloadStatusThis indicates the current status for an AP code download request. Default value is not started.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.4.6
wsAPCodeDownloadTotalCountIndicates the number of WS managed APs at the time a code download request is started. Value is 1 if a download request is for single AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.4.7
wsAPCodeDownloadSuccessCountIndicates the total number of APs that have successfully completed code download.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.4.8
wsAPCodeDownloadFailureCountIndicates the total number of APs that have failed to complete a code download.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.4.9
wsAPCodeDownloadAbortCountIndicates the total number of APs aborted from the code download.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.4.10
wsAPCodeDownloadAbortAbort the current code download on managed AP(s). Supported values: disable(0) - Code download is not to be aborted. enable(1) - Code download is to be aborted.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.4.11
rfManagement
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.5
wsChannelPlanTableThis table displays the channel plan parameters.
SEQUENCE OF WsChannelPlanEntry
.1.3.6.1.4.1.207.8.42.8.34.5.1
wsChannelPlanEntryEach entry in this table will indicate the channel plan parameters for specific radio frequency.
WsChannelPlanEntry
.1.3.6.1.4.1.207.8.42.8.34.5.1.1
wsChannelPlanThis object indicates the whether the channel plan is for ieee802dot11bORgn or ieee802dot11an.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.1
wsChannelPlanModeIndicates mode of computing and applying channel adjustments for managed AP radios operating in 2.4Ghz and 5Ghz band.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.2
wsChannelPlanIntervalIf channel plan mode is interval, this object indicates a regular interval in minutes at which to compute and apply a new channel adjustments.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.3
wsChannelPlanTimeIf channel plan mode is time, this object indicates the next scheduled time in minutes at which to compute and apply a new channel adjustments. Zero minutes stands for mid-night.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.4
wsChannelPlanHistoryDepthIndicates the maximum number of previously applied channel algorithm iterations stored on the controller and used in the next channel adjustment computation.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.5
wsChannelPlanOperatingStatusIndicates whether or not automatic channel adjustment is operating for managed AP radios operating in 2.4Ghz and 5Ghz band.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.6
wsChannelPlanLastIterationStatusIndicates the current iteration of channel plan adjustments for managed AP radio.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.7
wsChannelPlanManualActionThis action object is used to: - Run the Proposed Channel Adjustment alogorithm - Abort the channel plan. - Clear the calculated 2.4Ghz and 5Ghz channel plan. Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.8
wsChannelPlanManualStatusIndicates the current state of a manual request to compute or apply proposed channel adjustments.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.9
wsChannelPlanLastAlgorithmTimeThe time since the last channel plan algorithm ran.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.10
wsChannelPlanChangeThresholdThe minimum signal strength (dBm) with which a neighbor must be detected on the current operational channel in order for the channel plan to consider moving away from the current channel.ro
Integer32 (-99..-1)
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.11
wsChannelPlanIgnoreUnamangedAPsWhen enabled, the channel plan does not take into account the interfering unmanaged APs. Only managed APs are used for generating the channel plan.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.12
wsChannelPlanNumOfRadiosNumber of radios operating in the band. This includes the radios with static channel assignment.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.13
wsChannelPlanNumOfRadiosAnalysedIndicates the number of AP radios analyzed by the channel algorithm. This includes APs that operate on static channels.This value is reset at the start of each channel plan cycle.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.14
wsChannelPlanNumOfRadiosScannedIndicates the number of AP radios for which a Channel Plan Request has been sent by the channel algorithm.This value is reset at the start of each channel plan cycle.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.15
wsChannelPlanNumOfRadiosChangedIndicates the number of AP radios whose operating channel changed. This includes APs whose channel is changed to the same channel as the original operating channel.This value is reset at the start of each channel plan cycle.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.16
wsChannelPlanNumOfRadiosChangedToOrigChannelIndicates the number of AP radios that scanned the candidate channels but ended on the same channel.This value is reset at the start of each channel plan cycle.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.17
wsChannelPlanEstimatedTimeOfCompletionThe time for the estimated time of completion of the current channel plan cycle. When the channel plan is inactive the time stamp is zeroed out.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.18
wsChannelPlanPercentageCompleteDuring the channel plan cycle this parameter is the percentage of the AP radios that have been analyzed. When the channel plan is inactive this value is 0.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.19
wsChannelPlanChangeThresholdAdjThe number of dBm by which to reduce the Channel Change Threshold for detected managed APs based on the Transmit Power of the detected managed APs.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.20
wsChannelPlanManagedAPFailureIntervalThe number of seconds to wait before triggering the channel plan after a managed AP fails.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.21
wsChannelPlanRunOnManagedApFailureWhen this administrative parameter is enabled, the controller runs ACA algorithm after it detects that a managed AP failed.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.1.1.22
wsChannelPlanHistoryTableThis table contains parameters related to channel plan algorithm history, each entry indicates a previously computed and applied channel adjustment for the specified iteration. The maximum number of channel adjustment iterations displayed is based on the 802.11b/g or 802.11a channel plan history depth.obsolete
SEQUENCE OF WsChannelPlanHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.5.2
wsChannelPlanHistoryEntryEach entry in this table represents channel plan history for WS managed AP radio.obsolete
WsChannelPlanHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.5.2.1
wsChannelPlanHistoryThis object indicates the whether the channel adjustment is for 2.4Ghz or 5Ghz band.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.2.1.1
wsChannelPlanAPMacAddressThe Ethernet address of the AP.obsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.2.1.2
wsChannelPlanAPRadioInterfaceIndicates the radio interface for channel assignment.obsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.2.1.3
wsChannelPlanAPLocationA descriptive name of the AP, usually represented by its location.roobsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.5.2.1.4
wsChannelPlanAPHistoryIterationThis field indicates the iteration of the channel plan algorithm for this channel adjustment, the maximum history depth is configurable. This history prevents the same APs from being changed time after time.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.2.1.5
wsChannelPlanAPChannelIndicates the previously applied channel for this radio.roobsolete
Integer32(1|6|11)
.1.3.6.1.4.1.207.8.42.8.34.5.2.1.6
wsChannelPlanManualProposedAdjustmentTableThis table contains parameters related to proposed channel plan adjustment. These parameters are applicable only when channel plan mode is manual.obsolete
SEQUENCE OF WsChannelPlanManualProposedAdjustmentEntry
.1.3.6.1.4.1.207.8.42.8.34.5.3
wsChannelPlanManualProposedAdjustmentEntryEach entry in this table represents proposed channel plan adjustment.obsolete
WsChannelPlanManualProposedAdjustmentEntry
.1.3.6.1.4.1.207.8.42.8.34.5.3.1
wsChannelPlanManualThis object indicates the whether the channel plan is for 2.4Ghz or 5Ghz band.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.3.1.1
wsChannelPlanManualMacAddressThe Ethernet address of the AP.obsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.3.1.2
wsChannelPlanManualAPRadioInterfaceIndicates the radio interface for channel assignment.obsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.3.1.3
wsChannelPlanManualCurrentChannelIndicates the current operating channel for this radio.roobsolete
Integer32(1..13|36|40|44|48|52|56|60|64)
.1.3.6.1.4.1.207.8.42.8.34.5.3.1.4
wsChannelPlanManualNewChannelIndicates new channel assignment for this radio.roobsolete
Integer32(1..13|36|40|44|48|52|56|60|64)
.1.3.6.1.4.1.207.8.42.8.34.5.3.1.5
wsPowerAdjustmentModeFlag to set automatic power adjustment for all managed AP radios. If power adjustment mode is interval, periodically calculate the power adjustments and apply them. However, if power adjustment is manual, calculation and assignment of power adjustments initiated and controlled by the administrator user interface commands.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.4
wsPowerAdjustmentStrengthPower Plan signal strength threshold in dBm.ro
Integer32 (-99..-1)
.1.3.6.1.4.1.207.8.42.8.34.5.5
wsPowerManualProposedAdjustmentActionThis action object is used to: - Run the Proposed Power Adjustment alogorithm - Apply the same to network. - Clear the calculated power plan. Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.6
wsManualPowerAdjustmentStatusIndicates the current state of a manual request to compute or apply proposed power adjustments.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.7
wsPowerManualProposedAdjustmentTableThis table represents the proposed power adjustment status parameters. These parameters are displayed only when power adjustment mode is set to manual. The administrator manually apply all of the proposed power adjustments displayed.obsolete
SEQUENCE OF WsPowerManualProposedAdjustmentEntry
.1.3.6.1.4.1.207.8.42.8.34.5.8
wsPowerManualProposedAdjustmentEntryEach entry in this table represents the proposed power adjustment status parameters.obsolete
WsPowerManualProposedAdjustmentEntry
.1.3.6.1.4.1.207.8.42.8.34.5.8.1
wsPowerManualProposedAdjustmentAPMacAddressThe Ethernet address of the AP.obsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.8.1.1
wsPowerManualProposedAdjustmentAPRadioInterfaceIndicates the radio interface for power assignment.obsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.8.1.2
wsPowerManualProposedAdjustmentAPCurrentTxPowerIndicates the current operating power for this radio from the last power plan computation. Even after the new power plan is applied, this object displays the old value as opposed to the actual power currently set into the radio.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.8.1.3
wsPowerManualProposedAdjustmentAPNewTxPowerIndicates the new proposed power assignment for this radio.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.8.1.4
wsPowerPlanOperatingStatusThe Operational Status of the Power Plan Algorithm.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.9
wsPowerPlanAvgNumInterferingAPsThe average number of managed radios detected by every operational mode radio in the cluster.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.10
wsPowerPlanAvgNumInterferingVAPsThe average number of managed virtual APs detected by every operational mode radio in the cluster.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.11
wsPowerPlanAPNumOpRadiosThe number of operational mode radios in the cluster. The sentry and disabled radios are not counted.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.12
wsPowerPlanAPNumPwrCyclesNumber of power plan cycles executed by the controller.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.13
wsPowerPlanGlobalNumPwrChangesNumber of transmit power changes done by the power plan algorithm for all radios in the cluster.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.14
wsPowerPlanGlobalNumPwrIncNumber of transmit power increases done by the power plan algorithm for all radios in the cluster.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.15
wsPowerPlanGlobalNumPwrDecNumber of transmit power reductions done by the power plan algorithm for all radios in the cluster.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.16
wsPowerPlanTimeSinceLastPowerPLanTime since the last power plan was done. The power plan could have been triggered manually or automatically.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.17
wsChannelPlanPerRadioPerBandTableThis table contains the per band per radio channel plan status for a Managed AP.
SEQUENCE OF WsChannelPlanPerRadioPerBandEntry
.1.3.6.1.4.1.207.8.42.8.34.5.18
wsChannelPlanPerRadioPerBandEntryEach entry in this table represents channel plan per band per radio status for WS managed AP.
WsChannelPlanPerRadioPerBandEntry
.1.3.6.1.4.1.207.8.42.8.34.5.18.1
wsChannelPlanTypeThis object indicates the whether the channel plan is for ieee802dot11bORgn or ieee802dot11an.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.1
wsChannelPlanAPMacAddrThe Ethernet address of the Managed AP.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.2
wsChannelPlanAPRadioIntfIndicates the radio interface for channel assignment.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.3
wsChannelPlanAPIsLocalFlag Indicating whether the AP is managed by the cluster controller or a peer controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.4
wsChannelPlanAPCurrentChannelIndicates the current operating channel for this radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.5
wsChannelPlanAPOldChannelChannel on which this radio was operating before the channel change algorithm changed its channel.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.6
wsChannelPlanAPStrongestOldSignalThe strongest signal detected on the old channel. This is the signal used in the channel selection decision.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.7
wsChannelPlanAPStrongestNewSignalThe strongest signal detected on the new channel during the channel validation scan. This is the signal used in the channel selection decision. If the algorithm does not change the channel then this is the signal on the current channel detected during the channel check scan.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.8
wsChannelPlanAPChannelChangeIndFlag indicating whether the last channel plan cycle changed the channel for this radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.9
wsChannelPlanAPReasonCodeThe reason code indicating why the channel was changed or not changed for this radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.10
wsChannelPlanAPStrongestOldManagedAPandSignalThe MAC address and the signal strength of the strongest managed neighbor AP detected on the channel before that channel was changed. The MAC address is the base MAC of the managed AP.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.11
wsChannelPlanAPStrongestNewManagedAPandSignalThe MAC address and the signal strength of the strongest managed neighbor AP detected on the current operating channel. The MAC address is the base MAC of the managed AP.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.12
wsChannelPlanAPStrongestOldUnmanagedAPandSignalThe MAC address and the signal strength of the strongest unmanaged neighbor AP detected on the channel before that channel was changed.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.13
wsChannelPlanAPStrongestNewUnmanagedAPandSignalThe MAC address and the signal strength of the strongest unmanaged neighbor AP detected on the current operating channel.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.14
wsChannelPlanAPTimeSinceLastChannelChangeThe UTC time since the channel was last changed by the channel plan algorithm..ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.15
wsChannelPlanAPLastChanScanDurationNumber of milliseconds that the AP spent scanning channels during the last channel plan cycle. The scan time includes the operational channel scan, so the time may be non-zero even when the radio did not change channels.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.18.1.16
wsPowerPlanPerRadioTableThis table contains the per radio Power Plan Status for a Managed AP .
SEQUENCE OF WsPowerPlanPerRadioEntry
.1.3.6.1.4.1.207.8.42.8.34.5.19
wsPowerPlanPerRadioEntryEach entry in this table represents the per radio power plan status for WS managed AP.
WsPowerPlanPerRadioEntry
.1.3.6.1.4.1.207.8.42.8.34.5.19.1
wsPowerPlanAPMacAddressThe Ethernet address of the Managed AP.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.1
wsPowerPlanAPRadioInterfaceIndicates the radio interface of the Managed AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.2
wsPowerPlanAPIsLocalFlag Indicating whether the AP is managed by the cluster controller or a peer controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.3
wsPowerPlanAPChannelChannel on which the radio is operating. For sentry radios this field is set to sentry. The disabled radios report None.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.4
wsPowerPlanAPTxPowerThe current operating power for this radio. Sentry radios and disabled radios report 0%.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.5
wsPowerPlanAPNumInterferingAPsThe number of APs managed by this cluster detected by this radio on the operational channel.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.6
wsPowerPlanAPNumInterferingVAPsThe number of VAPs managed by this cluster detected by this radio on the operational channel.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.7
wsPowerPlanAPStrongestDetectorAPThe base MAC address of the managed AP that detects this radio with the strongest signal.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.8
wsPowerPlanAPStrongestDetectorRadioThe radio number of the managed AP that detects this radio with the strongest signal.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.9
wsPowerPlanAPStrongestDetectorSignalThe strongest signal strength in dBm with which a managed neighbor detects this radio.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.10
wsPowerPlanAPStrongestDetectedNeighborThe MAC address of the AP that this radio detects with the strongest signal.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.11
wsPowerPlanAPStrongestDetectedSignalThe signal strength with which this radio detects the strongest neighbor.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.12
wsPowerPlanAPLastPwrAdjStatusThe status indicating whether the power was changed during the most recent cycle of the power adjustment algorithm.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.13
wsPowerPlanAPLastPwrAdjReasonCodeThe reason code indicating why the last power adjustment action was taken or not taken.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.14
wsPowerPlanAPNumPwrChangesNumber of transmit power changes done by the power plan algorithm for this radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.15
wsPowerPlanAPNumPwrIncNumber of transmit power increases done by the power plan algorithm for this radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.16
wsPowerPlanAPNumPwrDecNumber of transmit power reductions done by the power plan algorithm for this radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.19.1.17
wsPowerPlanPerProfileTableThis table contains the per profile power plan status.
SEQUENCE OF WsPowerPlanPerProfileEntry
.1.3.6.1.4.1.207.8.42.8.34.5.20
wsPowerPlanPerProfileEntryEach entry in this table represents the per profile power plan status.
WsPowerPlanPerProfileEntry
.1.3.6.1.4.1.207.8.42.8.34.5.20.1
wsPowerPlanProfileIdIndicates the profile Id.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.20.1.1
wsPowerPlanPerProfileAvgNumInterferingAPsThe average number of managed radios detected by every operational mode radio that uses this profile. If the number of APs is greater than 999 then it is reported as 999..ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.20.1.2
wsPowerPlanPerProfileAvgNumInterferingVAPsThe average number of managed virtual APs detected by every operational mode radio that uses this profile.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.20.1.3
wsPowerPlanNumPwrChangesNumber of transmit power changes done by the power plan algorithm for all radios in this profile.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.20.1.4
wsPowerPlanNumPwrIncNumber of transmit power increases done by the power plan algorithm for all radios in this profile.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.20.1.5
wsPowerPlanNumPwrDecNumber of transmit power reductions done by the power plan algorithm for all radios in this profile.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.20.1.6
wsNtwProvisoningActionThis action object is used to: - start the network provision. - stop the network provision.rw
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.21
wsNtwProvisioningOperatingStatusThe Operational Status of the Initial Network Provisioning Protocol.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.5.22
wsNtwProvisioningTimeStampNumber of seconds the latest invocation of the protocol has been running.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.23
wsNtwProvisioningChanBGCompletionPercent complete for the channel protocol in the 2.4 GHz band.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.24
wsNtwProvisioningChanACompletionPercent complete for the channel protocol in the 5GHz band.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.25
wsNtwProvisioningPowerPlanCntCount-Down of how many power plan interations remain to be done.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.5.26
managedAP
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.6
wsManagedAPStatusTableThis table contains status parameters for all APs managed by the controller.
SEQUENCE OF WsManagedAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.6.1
wsManagedAPStatusEntryEach entry in this table contains status parameters for an AP managed by the controller. Controller can managed up to 48 APs at a time, with the actual maximum number supported dependent on the CPU performance of the controller and may be smaller or larger for some implementations.
WsManagedAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.6.1.1
wsManagedAPMacAddressEthernet address of the WS managed AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.1
wsManagedAPIpAddressNetwork IP address of the managed AP.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.2
wsManagedAPVendorIdIndicates vendor of the WS managed AP software. Broadcom vendor ID is 1.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.3
wsManagedAPSoftwareVersionIndicates software version of the WS managed AP.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.4
wsManagedAPHWTypeIndicates hardware platform of the WS managed AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.5
wsManagedAPSerialNumberIndicates serial number of the WS managed AP.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.6
wsManagedAPPartNumberIndicates hardware part number of the WS managed AP.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.7
wsManagedAPDiscoveryReasonIndicates discovery method used to detect the AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.8
wsManagedAPStatusIndicates current state of an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.9
wsManagedAPAuthenticatedClientsIndicates total number of clients currently authenticated to an AP.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.10
wsManagedAPSysUpTimeIndicates time in seconds since last power-on reset.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.11
wsManagedAPProfileIdThe configuration profile currently applied to the AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.12
wsManagedAPProfileNameThe descriptive name for the profile currently applied to the AP.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.13
wsManagedAPProtocolVersionIndicates the protocol version supported by the software on the AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.14
wsManagedAPCodeDownloadStatusThis indicates the current status of a code download request for this AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.15
wsManagedAPLocationA descriptive name for the AP, usually represented by location.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.16
wsManagedAPLastFailingConfigElementIndicates the element Id of the last failing configuration element.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.17
wsManagedAPConfigFailureErrMsgIndicates an ASCII string filled in by the AP, containing the error message.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.18
wsManagedAPResetThis is an action object. Setting this object to enable will reset the AP. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.19
wsManagedAPResetStatusThis object gives status regarding the AP that got reset.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.20
wsManagedAPFailedEntryPurgeThis is an action object. Setting this object to enable will purge the failed AP entry. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.21
wsManagedAPDebugPasswordIndicates password to be used for debugging managed AP. User should enable debug mode to set debug password. If password is configured, read on this object will return '*****'.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.22
wsManagedAPDebugModeThis is an action object. Enabling this object will enable the telnet access to the managed AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.23
wsManagedAPDebugStatusThis object indicates the status of the debug action requested when managed AP debug mode is set.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.24
wsManagedAPAgeTime since last communication with an AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.25
wsManagedAPManagingSwitchThis object indicates whether the AP is managed by this controller or peer-controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.26
wsManagedAPSwitchMacAddressMAC address of the WS managing the AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.27
wsManagedAPSwitchIpAddressIP address of the WS managing the AP.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.28
wsManagedAPIpMaskNetwork IP mask of the managed AP.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.29
wsManagedAPDistTunnelHomeAPClientsNumber of clients using this AP as a Home AP. It is also the number of clients that roamed away from this AP and are tunneling data back to it.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.30
wsManagedAPDistTunnelAssocAPClientsNumber of clients using this AP as an association AP. It is also the number of clients that roamed to this AP and are tunneling data back to the Home AP.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.31
wsManagedAPDistTunnelsTotalTotal number of APs to which this AP establishes distributed tunnels.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.32
wsManagedAPDistTunnelsMaxMcastReplMaximum number of tunnels on the home AP that are members of the same VLAN.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.33
wsManagedAPDistTunnelsMaxVlanMcastReplThe VLAN ID over which the max number of multicast replications are sent into the distributed tunnels.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.1.1.34
wsManagedAPFailedEntriesPurgeThis is an action object. Setting this object to enable will purge all the managed AP failed entries. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.2
wsManagedAPStatisticsTableThis table contains statistics available for each AP managed by the controller.
SEQUENCE OF WsManagedAPStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.6.3
wsManagedAPStatisticsEntryEach entry in this table contain statistics available for each AP managed by the controller.
WsManagedAPStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.6.3.1
wsManagedAPWLANPktsRecvdTotal packets received by an AP on the wireless network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.1
wsManagedAPWLANBytesRecvdTotal bytes received by an AP on the wireless network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.2
wsManagedAPWLANPktsTransmittedTotal packets transmitted by an AP on the wireless network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.3
wsManagedAPWLANBytesTransmittedTotal bytes transmitted by an AP on the wireless network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.4
wsManagedAPEthernetPktsRecvdTotal packets received by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.5
wsManagedAPEthernetBytesRecvdTotal bytes received by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.6
wsManagedAPEthernetMcastPktsRecvdTotal multicast packets received by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.7
wsManagedAPEthernetPktsTransmittedTotal packets transmitted by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.8
wsManagedAPEthernetBytesTransmittedTotal bytes transmitted by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.9
wsManagedAPEthernetTransmitErrorCountTotal transmit errors detected by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.10
wsManagedAPEthernetRecvdErrorCountTotal receive errors detected by an AP on the wired network.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.11
wsManagedAPCL2TunnelBytesRecvdTotal bytes received via central L2 tunnel by the AP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.12
wsManagedAPCL2TunnelPktsRecvdTotal packets received via central L2 tunnel by the AP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.13
wsManagedAPCL2TunnelMcastRecvdTotal multicast packets received via central L2 tunnel by the AP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.14
wsManagedAPCL2TunnelBytesTransmittedTotal bytes transmitted via central L2 tunnel by the AP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.15
wsManagedAPCL2TunnelPktsTransmittedTotal packets transmitted via central L2 tunnel by the AP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.16
wsManagedAPCL2TunnelMcastTransmittedTotal multicast packets transmitted via central L2 tunnel by the AP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.17
wsManagedAPWLANPktsRecvDroppedTotal packets dropped in the receive direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.18
wsManagedAPWLANBytesRecvDroppedTotal bytes dropped in the receive direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.19
wsManagedAPWLANPktsTransmitDroppedTotal packets dropped in the transmit direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.20
wsManagedAPWLANBytesTransmitDroppedTotal bytes dropped in the transmit direction by an AP on the wireless network. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.21
wsManagedAPDistTunnelBytesTransmittedTotal Bytes transmitted by the AP through all the established Distributed Tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.22
wsManagedAPDistTunnelBytesReceivedTotal Bytes received by the AP through all the established Distributed Tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.23
wsManagedAPDistTunnelPacketsTransmittedTotal packets transmitted by the AP through all the established Distributed Tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.24
wsManagedAPDistTunnelPacketsReceivedTotal packets received by the AP through all the established Distributed Tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.25
wsManagedAPDistTunnelMcastPacketsTransmittedTotal multicast packets transmitted by the AP through all the established Distributed Tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.26
wsManagedAPDistTunnelMcastPacketsReceivedTotal multicast packets received by the AP through all the established Distributed Tunnels.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.27
wsManagedAPDistTunnelRoamedClientsTotal number of clients that used this AP for Distributed Tunneling. This inclides clients that roamed away from and to this AP.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.28
wsManagedAPDistTunnelRoamedClientsIdleTimedOutNumber of client tunnel sessions that were terminated because of not sending the traffic through the tunnel after roaming.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.29
wsManagedAPDistTunnelRoamedClientsAgeTimedOutNumber of client tunnel sessions that were terminated because of expiry of the tunnel session.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.30
wsManagedAPDistTunnelMaxClientLimitSetupDenialsNumber of client tunnel session setup denials by the AP because of reaching the maximum configured client limit.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.31
wsManagedAPDistTunnelMaxReplSetupDenialsNumber of client tunnel setup denials by the AP because of reaching the maximum configured VLAN replications limit.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.32
wsManagedAPARPReqsFromBcastToUcastTotal number of ARP requests converted from broadcast to unicast packet before transmitting on wireless network.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.33
wsManagedAPFilteredARPRequestTotal number of ARP requests filtered by the wireless ARP suppression logic.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.34
wsManagedAPBroadcastedARPRequestsTotal number of ARP requests broadcasted on to the wireless network after being processed by wireless ARP suppression logic.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.3.1.35
wsManagedAPRadioStatusTableThis table contains status parameters per radio interface for all the APs managed by controller.
SEQUENCE OF WsManagedAPRadioStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.6.4
wsManagedAPRadioStatusEntryEach entry in this table contains status parameters per radio interface for an AP managed by the controller.
WsManagedAPRadioStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.6.4.1
wsManagedAPRadioInterfaceThe physical radio interface on the AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.1
wsManagedAPRadioMacAddressThe MAC address of the physical radio.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.2
wsManagedAPRadioChannelIf the radio is operational, the current transmit channel for this radio interface.ro
Integer32(0..13|36|40|44|48|52|56|60|64)
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.3
wsManagedAPRadioTxPowerIf the radio is operational, the current transmit power of the radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.4
wsManagedAPRadioAuthenticatedClientsTotal count of clients authenticated on the physical radio.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.5
wsManagedAPRadioWLANUtilizationTotal network utilization for the physical radio. This value is based on radio statistics.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.6
wsManagedAPRadioFixedChannelIndicatorThis flag indicates if a fixed channel is configured and assigned to the radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.7
wsManagedAPRadioMCAStatusIndicates the current state of a manual request to change the channel on this radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.8
wsManagedAPRadioFixedPowerIndicatorThis flag indicates if a fixed power setting is configured and assigned to the radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.9
wsManagedAPRadioMPAStatusIndicates the current state of a manual request to change the power setting on this radio.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.10
wsManagedAPRadioNeighborCountTotal number of neighbors that can be seen by this radio in its RF area.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.11
wsManagedAPRadioFixedChannelActionThis is an action object. When we set this object to apply, along with wsManagedAPRadioFixedChannel, controller starts applying fixed channel assignment for this radio. Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.12
wsManagedAPRadioFixedChannelThis object is used to assign the fixed channel for this radio on this Managed AP. The following MIB objects get changed on successful setting of this MIB object - 1. wsManagedAPRadioChannel --> changes to the channel set here 2. wsManagedAPRadioFixedChannelIndicator --> changes to 'yes (2)' Read on this object will always return 0.ro
Integer32(0..13|36|40|44|48|52|56|60|64)
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.13
wsManagedAPRadioFixedPowerActionThis is an action object. When we set this object to apply, controller starts applying fixed power adjustment for this radio. Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.14
wsManagedAPRadioFixedPowerThis object is used to assign the fixed power for this radio on this Managed AP. The following MIB objects get changed on successful setting of this MIB object - 1. wsManagedAPRadioTxPower --> changes to the power set here 2. wsManagedAPRadioFixedPowerIndicator --> changes to 'yes (2)' Read on this object will always return 0.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.15
wsManagedAPRadioBandwidthCurrent Channel Bandwidth In Use.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.16
wsManagedAPRadioResourceMeasEnabledCurrent state of enablement for Radio Resource Management (RRM).
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.4.1.17
wsManagedAPRadioStatisticsTableThis table contains statistics available for each physical radio on an AP managed by the controller.
SEQUENCE OF WsManagedAPRadioStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.6.5
wsManagedAPRadioStatisticsEntryEach entry in this table contain statistics available for each physical radio on an AP managed by controller.
WsManagedAPRadioStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.6.5.1
wsManagedAPRadioWLANPktsRecvdTotal packets received by an AP on this radio interface.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.1
wsManagedAPRadioWLANBytesRecvdTotal bytes received by an AP on this radio interface.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.2
wsManagedAPRadioWLANPktsTransmittedTotal packets transmitted by an AP on this radio interface.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.3
wsManagedAPRadioWLANBytesTransmittedTotal bytes transmitted by an AP on this radio interface.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.4
wsManagedAPRadioTxFragmentCountCount of acknowledged MPDU with an individual address or an MPDU with a multicast address of type data or management.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.5
wsManagedAPRadioMcastTxFrameCountCount of successfully transmitted MSDU frames where the multicast bit is set in the destination MAC address.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.6
wsManagedAPRadioFailedCountNumber of times a MSDU is not transmitted successfully due to transmit attempts exceeding either the short retry limit or the long retry limit.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.7
wsManagedAPRadioRetryCountNumber of times a MSDU is successfully transmitted after one or more retries.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.8
wsManagedAPRadioMultipleRetryCountNumber of times a MSDU is successfully transmitted after more than one retry.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.9
wsManagedAPRadioFrameDuplicateCountNumber of times a frame is received and sequence control field indicates is a duplicate.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.10
wsManagedAPRadioRTSSuccessCountCount of CTS frames received in response to the RTS frames.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.11
wsManagedAPRadioRTSFailureCountCount of CTS frames not received in response to the RTS frames.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.12
wsManagedAPRadioACKFailureCountCount of ACK frames not received when expected.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.13
wsManagedAPRadioRecvdFragmentCountCount of successfully received MPDU frames of type data or management.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.14
wsManagedAPRadioMcastRecvdFrameCountCount of MSDU frames received with the multicast bit set in the destination MAC address.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.15
wsManagedAPRadioFCSErrorCountCount of FCS errors detected in a received MPDU frame.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.16
wsManagedAPRadioTxFrameCountCount of each successfully transmitted MSDU.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.17
wsManagedAPRadioWEPUndecryptableCountCount of encrypted frames received and the key configuration of the transmitter indicates that the frame should not have been encrypted or that frame was discarded due to the receiving station not implementing the privacy option.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.18
wsManagedAPRadioWLANPktsRecvDroppedTotal packets dropped in the receive direction on this radio interface. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.19
wsManagedAPRadioWLANBytesRecvDroppedTotal bytes dropped in the receive direction on this radio interface. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.20
wsManagedAPRadioWLANPktsTransmitDroppedTotal packets dropped in the transmit direction by this radio interface. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.21
wsManagedAPRadioWLANBytesTransmitDroppedTotal bytes dropped in the transmit direction by this radio interface. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.5.1.22
wsManagedAPNeighborAPListTableThis table contains neighbor AP list.
SEQUENCE OF WsManagedAPNeighborAPListEntry
.1.3.6.1.4.1.207.8.42.8.34.6.6
wsManagedAPNeighborAPListEntryEach entry in this table contains neighbor AP information.
WsManagedAPNeighborAPListEntry
.1.3.6.1.4.1.207.8.42.8.34.6.6.1
wsNeighborMacAddressThe MAC address of neighbor AP network. This could be a physical radio MAC or VAP MAC address.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.6.1.1
wsNeighborSSIDService Set ID of neighbor AP network.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.6.1.2
wsNeighborRSSIThis object indicates Received Signal Strength(RSSI) from the neighbor radios in a given channel.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.6.1.3
wsNeighborStatusIndicates managed status of the AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.6.1.4
wsNeighborAgeIndicates time since this AP was last detected.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.6.6.1.5
wsManagedAPNeighborEntriesPurgeThis is an action object used to purge the AP neighbor entries. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.7
wsManagedAPNeighborClientListTableThis table contains neighbor client list currently detected by an RF scan on the radio.
SEQUENCE OF WsManagedAPNeighborClientListEntry
.1.3.6.1.4.1.207.8.42.8.34.6.8
wsManagedAPNeighborClientListEntryEach entry in this table contain neighbor client information.
WsManagedAPNeighborClientListEntry
.1.3.6.1.4.1.207.8.42.8.34.6.8.1
wsNeighborClientMacAddressThe MAC address of neighbor client station.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.8.1.1
wsNeighborClientRSSIIndicates RSSI from neighbor clients on the radio.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.8.1.2
wsNeighborClientChannelIndicates AP channel, on which the client frame was received.ro
Integer32(1..13|36|40|44|48|52|56|60|64)
.1.3.6.1.4.1.207.8.42.8.34.6.8.1.3
wsNeighborClientAgeIndicates time since a client was last detected.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.6.8.1.4
wsNeighborClientDiscoveryReasonIndicates discovery methods for the neighbor client.ro
Bits
.1.3.6.1.4.1.207.8.42.8.34.6.8.1.5
wsManagedAPVAPStatusTableThis table contains status parameters for each VAP configured on a radio interface for a WS managed AP.
SEQUENCE OF WsManagedAPVAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.6.9
wsManagedAPVAPStatusEntryEach entry in this table contains status parameters of each VAP configured on radio.
WsManagedAPVAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.6.9.1
wsManagedVAPIdIndicates VAP Id.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.9.1.1
wsManagedVAPMacAddressIndicates the ethernet address of the VAP MAC address.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.9.1.2
wsManagedVAPSSIDNetwork assigned to a VAP MAC Address.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.6.9.1.3
wsManagedVAPAuthenticatedClientsNumber of clients currently authenticated to VAP.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.6.9.1.4
wsManagedAPVAPStatisticsTableThis table contains statistics available for each VAP on the WS managed AP.
SEQUENCE OF WsManagedAPVAPStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.6.10
wsManagedAPVAPStatisticsEntryEach entry in this table contain statistics available for each VAP on the WS managed AP.
WsManagedAPVAPStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.6.10.1
wsManagedVAPAssociationFailuresNumber of clients that have been denied association to the VAP.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.1
wsManagedVAPAuthenticationFailuresNumber of clients that have failed authentication to the VAP.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.2
wsManagedVAPWLANPktsRecvdTotal packets received by an AP on this VAP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.3
wsManagedVAPWLANBytesRecvdTotal bytes received by an AP on this VAP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.4
wsManagedVAPWLANPktsTransmittedTotal packets transmitted by an AP on this VAP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.5
wsManagedVAPWLANBytesTransmittedTotal bytes transmitted by an AP on this VAP.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.6
wsManagedVAPWLANPktsRecvDroppedTotal packets dropped in the receive direction by an AP on this VAP. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.7
wsManagedVAPWLANBytesRecvDroppedTotal bytes dropped in the receive direction by an AP on this VAP. This is due to client QoS actions affecting the wireless up (inbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.8
wsManagedVAPWLANPktsTransmitDroppedTotal packets dropped in the transmit direction by an AP on this VAP. This is due to client QoS actions affecting the wireless down (outbound) direction from client to AP.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.9
wsManagedVAPWLANBytesTransmitDroppedTotal bytes dropped in the transmit direction by an AP on this VAP. This is due to client QoS actions affecting the wireless down (outbound) direction from client to AP.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.6.10.1.10
wsManagedAPResetAllThis is an action object. Setting this object to enable will reset all the managed APs. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.11
wsManagedAPRadioEligibleChannelListTableThis table represents eligible channel entries for an AP radio to consider for channel algorithm. It is based on country code, hardware capabilities and any configured channel limitations.
SEQUENCE OF WsManagedAPRadioEligibleChannelListEntry
.1.3.6.1.4.1.207.8.42.8.34.6.12
wsManagedAPRadioEligibleChannelListEntryEach entry in this table represents eligible channel for an AP radio.
WsManagedAPRadioEligibleChannelListEntry
.1.3.6.1.4.1.207.8.42.8.34.6.12.1
wsManagedAPRadioEligibleChannelIndicates list of supported channel by the managed ap. List contains one or more entries from 1-255, actual range is determined by physical mode and country code.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.6.12.1.1
wsManagedAPRadioEligibleChannelRdrDetRequiredThis flag indicates if radar detection is enabled or not on this channel.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.12.1.2
wsManagedAPRadioEligibleChannelRdrDetectedThis flag indicates if radar is detected or not on this channel.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.6.12.1.3
wsManagedAPRadioEligibleChannelLastRdrDetTimeIndicates the time in seconds since last radar was detected.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.6.12.1.4
associatedClient
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.7
wsAssociatedClientStatusTableThis table contains status parameters of clients that are currently associated with managed APs.obsolete
SEQUENCE OF WsAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.1
wsAssociatedClientStatusEntryEach entry in this table contain client status parameters assocaited with the WS managed AP.obsolete
WsAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.1.1
wsAssociatedClientMacAddressAssociated client MAC address.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.1
wsAssociatedClientTunnelIpAddressIndicates network IP address of the client station, 0.0.0.0 indicates unknown. Tunnel IP subnet is present only for clients authenticated with tunneled VAPs.obsolete
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.2
wsAssociatedClientUserNameIndicates user name of the client that have authenticated via 802.1x, clients on networks with other security modes will not have a user name.roobsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.3
wsAssociatedClientSSIDIndicates the network on which the client is connected.roobsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.4
wsAssociatedClientVLANIf client is on VAP using VLAN data forwarding mode, indicates obsolete assigned VLAN.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.5
wsAssociatedClientStatusThis object indicates client's status.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.6
wsAssociatedClientTxDataRateIndicates the data rate, AP will actually support in setting up communications with client stations represented by a count from 2 - 1200, corresponding to data rates in multiples of 500 kbit/s from 1 Mbit/s to 600 Mbit/s. Supported Data Rate Mbps 2 1 4 2 11 5.5 12 6 18 9 and so on.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.7
wsAssociatedClientInactivePeriodFor a current association, period of time that the AP has not seen any traffic for the client.roobsolete
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.8
wsAssociatedClientDisassociateActionThis is an action object. Setting this object to start will initiate the disassociation of associated client. Read on this object will always return none.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.9
wsAssociatedClientAgeIndicates time since the controller has received new data for this client.roobsolete
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.10
wsAssociatedClientAssociatingSwitchThis object indicates whether the client is associated to an AP managed by this controller or peer-controller.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.11
wsAssociatedClientSwitchMacAddressMAC address of the WS associating the client.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.12
wsAssociatedClientSwitchIpAddressIP address of the WS associating the client.roobsolete
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.13
wsAssociatedClientDot11nCapableFlag indicating whether this client is capable of 802.11n operation.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.14
wsAssociatedClientStbcCapableFlag indicating whether this client is capable of Space Time Block Code (STBC) operation.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.15
wsAssociatedClientDistTunnelStatusIndicates whether L2 Distributed Tunneling is Enabled or Disabledroobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.16
wsAssociatedClientDistTunnelRoamStatusIndicates whether the client is using the distrubuted tunnel or not. Also indicates if it is a roamed client or not.roobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.17
wsAssociatedClientDistTunnelHomeAPMacIndicates MAC Address of the client's Home AP. Here the client should be associated with the network on which the L2 Distributed Tunneling is enabled.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.18
wsAssociatedClientDistTunnelAssocAPMacMAC Address of the client's Association AP to which the client has roamed to.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.19
wsAssociatedClientAPMacAddressMAC Address of the AP to which client is Associated.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.20
wsAssociatedClientBSSIDBSSID of the VAP to which client is associated.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.21
wsAssociatedClientRadioInterfaceIndicates the radio interface on which client is associated.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.22
wsAssociatedClientChannelIndicates channel for associated client entry.roobsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.23
wsAssociatedClientNwTimeIndicates time since this client first authenticated with the network.roobsolete
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.24
wsAssociatedClientIpAddressIndicates network IPv4 address of the client station detetecd through ARP snooping, 0.0.0.0 indicates unknown.roobsolete
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.25
wsAssociatedClientNetBiosNameNetBios Name of the client.roobsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.26
wsAssociatedClientRRMSupportedIndicates if the Radio Resource Management (RRM) portion of the IEEE 802.11k standard is supported by client and RRM is enabled is on the AP Profile. Value 2 indicates the client supports RRM portion and RRM Mode is not enabled on AP Profile. Value 3 indicates client doesnot support RRMobsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.27
wsAssociatedClientRRMLocationReportSupportedIndicates if the client can support RRM location report requests.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.28
wsAssociatedClientRRMBeaconTableMeasurementSupportedIndicates if the client can detect APs via RRM beacon table reports.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.29
wsAssociatedClientRRMBeaconActiveMeasurementSupportedIndicates if the client supports active scan capability.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.30
wsAssociatedClientRRMBeaconPassiveMeasurementSupportedIndicates if the client supports passive scan capability.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.31
wsAssociatedClientRRMChannelLoadMeasurementSupportedIndicates if the client supports RRM channel load measurement.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.1.1.32
wsAssociatedClientStatisticsTableThis table contains statistics available for each client associated to a WS managed AP.obsolete
SEQUENCE OF WsAssociatedClientStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.7.2
wsAssociatedClientStatisticsEntryEach entry in this table contain statistics available for each client associated a WS managed AP.obsolete
WsAssociatedClientStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.7.2.1
wsAssociatedClientPktsRecvdTotal packets received by a managed AP from the client station.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.1
wsAssociatedClientBytesRecvdTotal bytes received by a managed AP from the client station.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.2
wsAssociatedClientPktsTransmittedTotal packets transmitted by a managed AP to the client station.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.3
wsAssociatedClientBytesTransmittedTotal bytes transmitted by a managed AP to the client station.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.4
wsAssociatedClientDuplicatePktsRecvdTotal duplicate packets received from the client station.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.5
wsAssociatedClientFragmentedPktsRecvdTotal fragmented packets received from the client station.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.6
wsAssociatedClientFragmentedPktsTransmittedTotal fragmented packets transmitted to the client station.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.7
wsAssociatedClientTransmitRetryCountIndicates number of times transmits to client station succeeded after one or more retries.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.8
wsAssociatedClientTransmitRetryFailedCountNumber of times transmits to client station failed after one or more retries.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.9
wsAssociatedClientPktsRecvDroppedTotal packets dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.10
wsAssociatedClientBytesRecvDroppedTotal bytes dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.11
wsAssociatedClientPktsTransmitDroppedTotal packets dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.12
wsAssociatedClientBytesTransmitDroppedTotal bytes dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.13
wsAssociatedClientTsViolatePktsRecvdNumber of packets received by the AP from a client station that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.obsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.14
wsAssociatedClientTsViolatePktsTransmittedNumber of packets transmitted by the AP to a client station that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.obsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.2.1.15
wsAssociatedClientNeighborManagedAPStatusTableThis table is maintained to lookup all WS managed APs detected, client can see in its RF area.obsolete
SEQUENCE OF WsAssociatedClientNeighborManagedAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.3
wsAssociatedClientNeighborManagedAPStatusEntryEach entry in this table contain WS managed APs that can be seen by client in its RF area.obsolete
WsAssociatedClientNeighborManagedAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.3.1
wsClientStationMacAddressThe Ethernet address of a client station.obsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.3.1.1
wsClientNeighborWSManagedAPMacAddressThe Ethernet address of a WS managed AP.obsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.3.1.2
wsClientNeighborWSManagedAPRadioInterfaceThe radio interface of Managed AP.obsolete
Integer32
.1.3.6.1.4.1.207.8.42.8.34.7.3.1.3
wsClientStationDiscoveryReasonIndicates the client status with respect to the Managed AP it is refering. One or more flags can be enabled at the same time.roobsolete
Bits
.1.3.6.1.4.1.207.8.42.8.34.7.3.1.4
wsVAPAssociatedClientStatusTableThis table is maintained to lookup clients associated to a specific VAP on a WS managed AP.obsolete
SEQUENCE OF WsVAPAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.4
wsVAPAssociatedClientStatusEntryEach entry in this table contain clients associated to each VAP.obsolete
WsVAPAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.4.1
wsVAPMacAddressThe Ethernet address assigned to a VAP.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.4.1.1
wsVAPAssociatedClientMacAddressThe Ethernet address of associated client station.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.4.1.2
wsSSIDAssociatedClientStatusTableThis table is maintained to lookup all clients associated to a particular network.obsolete
SEQUENCE OF WsSSIDAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.5
wsSSIDAssociatedClientStatusEntryEach entry in this table contain clients associated to a particular network.obsolete
WsSSIDAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.5.1
wsSSIDIndicates the network on which the client is connected.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.5.1.1
wsSSIDAssociatedClientMacAddressThe Ethernet address of the client station.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.5.1.2
wsSwitchAssociatedClientStatusTableThis table is maintained to lookup clients associated to the APs managed by the specific controller.obsolete
SEQUENCE OF WsSwitchAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.6
wsSwitchAssociatedClientStatusEntryEach entry in this table contain client associated to each controller.obsolete
WsSwitchAssociatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.6.1
wsAssociatedClientSwitchIPAddressIP address of the WS associating the client.obsolete
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.7.6.1.1
wsSwitchAssociatedClientMacAddressEthernet address of the associated client station.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.7.6.1.2
wsAssociatedClientQosStatusTableThis table contains client QoS status parameters of clients that are currently associated with managed APs. These objects represent the actual operational status values in effect for the clients.obsolete
SEQUENCE OF WsAssociatedClientQosStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.7
wsAssociatedClientQosStatusEntryEach entry in this table contains client QoS status parameters for a client associated with the WS managed AP.obsolete
WsAssociatedClientQosStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.7.1
wsAssociatedClientQosBandwidthLimitDownMaximum bandwidth rate allowed for the wireless down (outbound) direction from AP to client, thus controlling the maximum receive rate from the AP for this wireless client. This parameter is specified in bits-per-second (bps). The displayed value represents the actual bandwidth rate in use for the client, which may differ from the configured value since the AP rounds down to the nearest 64000 bps. A value of 0 indicates bandwidth limiting is disabled in this direction for the client.obsolete
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.1
wsAssociatedClientQosBandwidthLimitUpMaximum bandwidth rate allowed for the wireless up (inbound) direction from client to AP, thus controlling the maximum send rate from this wireless client to the AP. This parameter is specified in bits-per-second (bps). The displayed value represents the actual bandwidth rate in use for the client, which may differ from the configured value since the AP rounds down to the nearest 64000 bps. A value of 0 indicates bandwidth limiting is disabled in this direction for the client.obsolete
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.2
wsAssociatedClientQosAccessControlDownTypeAccess list type used for the wireless down (outbound) direction from the AP to this client. The wsAssociatedClientQosAccessControlDownName object identifies the access list.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.3
wsAssociatedClientQosAccessControlDownNameName of the access list in use in accordance with the wsAssociatedClientQosAccessControlDownType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.4
wsAssociatedClientQosAccessControlUpTypeAccess list type used for the wireless up (inbound) direction from this client to the AP. The wsAssociatedClientQosAccessControlUpName object identifies the access list.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.5
wsAssociatedClientQosAccessControlUpNameName of the access list in use in accordance with the wsAssociatedClientQosAccessControlUpType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.6
wsAssociatedClientQosDiffservPolicyDownTypeDiffServ policy type used for the wireless down (outbound) direction from the AP to this client. The wsAssociatedClientQosDiffservPolicyDownName object identifies the DiffServ policy.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.7
wsAssociatedClientQosDiffservPolicyDownNameName of the DiffServ policy in use in accordance with the wsAssociatedClientQosDiffservPolicyDownType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.8
wsAssociatedClientQosDiffservPolicyUpTypeDiffServ policy type used for the wireless up (inbound) direction from this client to the AP. The wsAssociatedClientQosDiffservPolicyUpName object identifies the DiffServ policy.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.9
wsAssociatedClientQosDiffservPolicyUpNameName of the DiffServ policy in use in accordance with the wsAssociatedClientQosDiffservPolicyUpType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.10
wsAssociatedClientQosOperStatusDesignates the AP quality-of-service operational status for this wireless client. This represents the combined states of the wsApClientQosMode object and the wsNetworkClientQosMode object for the wireless network to which this client is associated.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.7.1.11
wsAssociatedClientSessionStatisticsTableThis table contains statistics available for each client associated to a WS managed AP, but accumulated for the duration of the entire WLAN session, inclusive of client roaming.obsolete
SEQUENCE OF WsAssociatedClientSessionStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.7.8
wsAssociatedClientSessionStatisticsEntryEach entry in this table contain statistics available for each client associated a WS managed AP, but accumulated for the duration of the entire WLAN session, inclusive of client roaming.obsolete
WsAssociatedClientSessionStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.7.8.1
wsAssociatedClientSessionPktsRecvdTotal packets received by managed APs from the client station throughout the duration of the current WLAN session.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.1
wsAssociatedClientSessionBytesRecvdTotal bytes received by managed APs from the client station throughout the duration of the current WLAN session.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.2
wsAssociatedClientSessionPktsTransmittedTotal packets transmitted by managed APs to the client station throughout the duration of the current WLAN session.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.3
wsAssociatedClientSessionBytesTransmittedTotal bytes transmitted by managed APs to the client station throughout the duration of the current WLAN session.roobsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.4
wsAssociatedClientSessionDuplicatePktsRecvdTotal duplicate packets received from the client station throughout the duration of the current WLAN session.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.5
wsAssociatedClientSessionFragmentedPktsRecvdTotal fragmented packets received from the client station. throughout the duration of the current WLAN session.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.6
wsAssociatedClientSessionFragmentedPktsTransmittedTotal fragmented packets transmitted to the client station throughout the duration of the current WLAN session.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.7
wsAssociatedClientSessionTransmitRetryCountIndicates number of times transmits to client station succeeded after one or more retries throughout the duration of the current WLAN session.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.8
wsAssociatedClientSessionTransmitRetryFailedCountNumber of times transmits to client station failed after one or more retries throughout the duration of the current WLAN session.roobsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.9
wsAssociatedClientSessionPktsRecvDroppedTotal packets dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.10
wsAssociatedClientSessionBytesRecvDroppedTotal bytes dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.11
wsAssociatedClientSessionPktsTransmitDroppedTotal packets dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.12
wsAssociatedClientSessionBytesTransmitDroppedTotal bytes dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.obsolete
Counter64
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.13
wsAssociatedClientSessionTSViolatePktsRecvdNumber of packets received by managed APs from a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.obsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.14
wsAssociatedClientSessionTSViolatePktsTransmittedNumber of packets transmitted by managed APs to a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.obsolete
Counter32
.1.3.6.1.4.1.207.8.42.8.34.7.8.1.15
wsAssociatedClientQosCachedStatusTableThis table contains cached client QoS status parameters of clients that are currently associated with managed APs. These objects represent values that were retrieved from a RADIUS server for this client. See the wsAssociatedClientQosStatusTable for the current set of operational values in use for this client.obsolete
SEQUENCE OF WsAssociatedClientQosCachedStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.9
wsAssociatedClientQosCachedStatusEntryEach entry in this table contains client QoS cached status parameters for a client associated with the WS managed AP. Only those parameters successfully retrieved from a RADIUS server via 802.1X authentication on behalf of a wireless client are displayed.obsolete
WsAssociatedClientQosCachedStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.7.9.1
wsAssociatedClientQosCachedBandwidthLimitDownMaximum bandwidth rate allowed for the wireless down (outbound) direction from AP to client, thus controlling the maximum receive rate from the AP for this wireless client. This parameter is specified in bits-per-second (bps). A value of 0 indicates bandwidth limiting is disabled in this direction for the client.obsolete
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.1
wsAssociatedClientQosCachedBandwidthLimitUpMaximum bandwidth rate allowed for the wireless up (inbound) direction from client to AP, thus controlling the maximum send rate from this wireless client to the AP. This parameter is specified in bits-per-second (bps). A value of 0 indicates bandwidth limiting is disabled in this direction for the client.obsolete
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.2
wsAssociatedClientQosCachedAccessControlDownTypeAccess list type used for the wireless down (outbound) direction from the AP to this client. The wsAssociatedClientQosCachedAccessControlDownName object identifies the access list.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.3
wsAssociatedClientQosCachedAccessControlDownNameName of the access list in use in accordance with the wsAssociatedClientQosCachedAccessControlDownType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.4
wsAssociatedClientQosCachedAccessControlUpTypeAccess list type used for the wireless up (inbound) direction from this client to the AP. The wsAssociatedClientQosCachedAccessControlUpName object identifies the access list.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.5
wsAssociatedClientQosCachedAccessControlUpNameName of the access list in use in accordance with the wsAssociatedClientQosCachedAccessControlUpType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.6
wsAssociatedClientQosCachedDiffservPolicyDownTypeDiffServ policy type used for the wireless down (outbound) direction from the AP to this client. The wsAssociatedClientQosCachedDiffservPolicyDownName object identifies the DiffServ policy.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.7
wsAssociatedClientQosCachedDiffservPolicyDownNameName of the DiffServ policy in use in accordance with the wsAssociatedClientQosCachedDiffservPolicyDownType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.8
wsAssociatedClientQosCachedDiffservPolicyUpTypeDiffServ policy type used for the wireless up (inbound) direction from this client to the AP. The wsAssociatedClientQosCachedDiffservPolicyUpName object identifies the DiffServ policy.obsolete
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.9
wsAssociatedClientQosCachedDiffservPolicyUpNameName of the DiffServ policy in use in accordance with the wsAssociatedClientQosCachedDiffservPolicyUpType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.obsolete
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.7.9.1.10
peerSwitch
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.8
wsPeerStatusTableThis table contain status parameters of peer controllers of wireless controller.
SEQUENCE OF WsPeerStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.8.1
wsPeerStatusEntryEach entry describes the status parameters of each peer of wireless controller.
WsPeerStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.8.1.1
wsPeerIpAddressIP address of the peer controller.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.1
wsPeerClusterControllerIndicatorIndicates if the peer controller is currently the Cluster Controller of the peer group or not.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.2
wsPeerTotalPeerSwitchesTotal number of peer controllers detected on the network.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.3
wsPeerVendorIdIndicates vendor of peer controller software.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.4
wsPeerProtocolVersionIndicates software version of peer controller.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.5
wsPeerSoftwareVersionIndicates the protocol version of software on the peer controller.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.6
wsPeerDiscoveryReasonIndicates the discovery method of peer controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.7
wsPeerAgeIndicates time in seconds since last communication with the controller.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.8
wsPeerManagedAPCountNumber of APs in the peer managed AP database that are authenticated, configured, and have an active connection with the wireless controller.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.9
wsPeerConfigRequestActionThis action object is used to: - start - Start the config push into the peer controller. - Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.10
wsPeerConfigRequestStatusThe status for the configuration push operation to this peer controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.11
wsPeerConfigSwitchIpIP Address of the last controller from which this controller received any wireless configuration data.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.12
wsPeerConfigReceivedIndicates which portions of configuration were last received from a peer controller. The combination of configurations are denoted by doing 'AND' of the values.BIT zero is ignored. Ex: Value 9 specifies only bit 2 and 5 are set, So it denotes channelPowerConfig and globalConfig receivedro
Bits
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.13
wsPeerConfigReceivedTimestampThe last time this controller received any configuration data from a peer controller.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.8.1.1.14
wsPeerSwitchManagedAPTableThis table contain Managed AP database of the peer controllers of wireless controller.
SEQUENCE OF WsPeerSwitchManagedAPEntry
.1.3.6.1.4.1.207.8.42.8.34.8.3
wsPeerSwitchManagedAPEntryEach entry describes the Managed AP Entry of the peer of wireless controller.
WsPeerSwitchManagedAPEntry
.1.3.6.1.4.1.207.8.42.8.34.8.3.1
wsPeerSwitchIpAddressThe IP Address of the Peer controller.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.1
wsPeerSwitchAPMacAddressThe VAP0 MAC address of the AP managed by the peer controller.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.2
wsPeerSwitchAPLocationThis object indicates descriptive location of the managed AP by the peer controller.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.3
wsPeerSwitchAPIPAddressIP address for the peer managed AP.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.4
wsPeerSwitchAPProfileIdUnique ID for the peer managed AP's configuration profile.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.5
wsPeerSwitchAPProfileNameThe descriptive name for the peer managed AP's configuration profile.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.6
wsPeerSwitchAPHardwareTypeThe Hardware platform for the AP. 1 --> BROADCOM.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.8.3.1.7
intrusionDetection
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.9
wsRFScanAPStatusTableThis table is maintained with RF scan data received from the WS managed APs.
SEQUENCE OF WsRFScanAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.1
wsRFScanAPStatusEntryEach entry in this table contain RF scan data received from the WS managed AP.
WsRFScanAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.1.1
wsRFScanAPMacAddressThe MAC address of the detected AP, this could be a physical radio interface or VAP MAC.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.1
wsRFScanAPRadioInterfaceIf status indicates a managed AP, this indicates the radio interface on the Detected AP, if the value is unknown (i.e. Rogue or third party APs) it is set to '0'.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.2
wsRFScanAPBaseMacAddressIf status indicates a managed AP, this indicates the base MAC address of the detected AP, If the value is unknown (i.e. Rogue of third party AP's) it is set to '0'.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.3
wsRFScanAPSSIDService Set Id of the detected network.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.4
wsRFScanAPPhysicalModeIndicates the 802.11 mode being used on an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.5
wsRFScanAPChannelIndicates transmit channel of an AP.ro
Integer32(0..13|36|40|44|48|52|56|60|64)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.6
wsRFScanAPTxRateIndicates the rate at which an AP is currently transmitting data, from 1 Mbit/s to 600 Mbit/s.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.7
wsRFScanAPBeaconIntervalIndicates beacon interval for a neighbor AP network.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.8
wsRFScanAPStatusIndicates the managed status of an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.9
wsRFScanAPDiscoveredAgeIndicates timestamp in seconds when an AP was first detected.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.10
wsRFScanAPAgeIndicates time in seconds since an AP was last detected in the scan.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.11
wsRFScanAPStatusInitialIndicates the initial status of an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.12
wsRFScanAPSecurityModeIndicates the security mode of an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.13
wsRFScanAPHighRateIndicates the highest supported rate advertised by an AP in Mbps.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.14
wsRFScanAPDot11nModeIndicates whether 802.11n is supported by an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.15
wsRFScanAPAdHocIndicates that the beacon frame was received from an ad hoc network for an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.16
wsRFScanAPPeerManagedIndicates that an AP is managed by a peer controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.17
wsRFScanAPRogueMitigationIndicates whether rogue AP mitigation is in progress for an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.18
wsRFScanAPAcknowledgeRogueThis is a command that allows the administrator to restore the initial status for this AP in the RF Scan database. Read on this object will always return no-action.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.19
wsRFScanAPBSSIDBSSID advertised in the network.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.20
wsRFScanAPOUIManufacturer information for this AP.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.21
wsRFScanAPRRMSupportedAdvertised status of Radio Resource Management (RRM) capability.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.22
wsRFScanAPDot11acModeIndicates whether 802.11ac is supported by an AP.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.1.1.23
wsRFScanAPEntriesPurgeThis is an action object used to purge the RF scan entries present in the network. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.2
wsFailureAPStatusTableThis table contain status parameters of APs that failed to authenticate, or associate with wireless controller.
SEQUENCE OF WsFailureAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.3
wsFailureAPStatusEntryEach entry in this table contain status parameters of failed AP.
WsFailureAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.3.1
wsFailedAPMacAddressThe Ethernet address of the failed AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.1
wsFailedAPIpAddressThe network IP address of the failed AP.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.2
wsFailedAPVendorIdIndicates vendor of the failed AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.3
wsFailedAPSoftwareVersionIndicates software version of the failed AP.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.4
wsFailedAPHWTypeIndicates hardware type of the failed AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.5
wsFailedAPFailureTypeIndicates the last type of failure that occured.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.6
wsFailedAPValidationFailureCountNumber of times the AP failed to authenticate due to MAC address validation failure.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.7
wsFailedAPAuthenticationFailureCountNumber of times the AP failed to authenticate due to incorrect authentication credentials.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.8
wsFailedAPProtocolVersionIndicates the protocol version supported by the software on this AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.9
wsFailedAPAgeIndicates time since failure occured.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.10
wsFailedAPReportingSwitchThis object indicates whether the AP failure happened on this controller or on the peer-controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.11
wsFailedAPSwitchMacAddressMAC address of the WS reporting the AP Authentication Failure.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.12
wsFailedAPSwitchIpAddressIP address of the WS reporting the AP Authentication Failure.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.9.3.1.13
wsAPFailureEntriesPurgeThis is an action object used to purge the failed AP entries. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.4
wsAdHocClientStatusTableThis table contains information related to Ad hoc clients detected in the network.
SEQUENCE OF WsAdHocClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.5
wsAdHocClientStatusEntryEach entry in this table represents Ad hoc client detected in the network.
WsAdHocClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.5.1
wsAdHocClientMacAddressThe Ethernet address of the Ad hoc client detected. If detection Mode is 'Beacon' then the client is represented as an AP in the RF Scan database and the Neighbor AP List. If the detection mode is 'Data Frame' then the client information is in the Neighbor Client List.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.5.1.1
wsDetectedAPMacAddressThe MAC address of an AP which last detected the Ad hoc client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.5.1.2
wsDetectedAPRadioInterfaceThe radio interface of an AP which last detected the Ad hoc client.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.5.1.3
wsAdHocClientDetectionModeThe mechanism through which this Ad hoc device is detected. This can be through beacon frame or data frame.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.5.1.4
wsAdHocClientAgeIndicates time since the last detection of this Ad hoc client.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.5.1.5
wsAdHocClientEntriesPurgeThis is an action object used to purge the ad-hoc client entries. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.6
wsAPTriangulationNonSentryStatusTableThis table contains triangulation data to help the administrator determine which non-sentry APs are detecting the device.
SEQUENCE OF WsAPTriangulationNonSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.7
wsAPTriangulationNonSentryStatusEntryEach entry in this table contains triangulation information for the RF Scan entry.
WsAPTriangulationNonSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.7.1
wsAPTriangulationMacAddrThe MAC address of the detected AP, this could be a physical radio interface or VAP MAC.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.1
wsAPTriangulationIdIndex of the sentry triangulation entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.2
wsAPTriangulationNonSentryMacAddrThe MAC address of the detecting AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.3
wsAPTriangulationNonSentryRadioThe radio of the detecting AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.4
wsAPTriangulationRssiReceived signal strength indicator in percent (0 to 100%).ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.5
wsAPTriangulationStrengthReceived signal strength in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.6
wsAPTriangulationNoiseNoise reported on the channel by the AP in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.7
wsAPTriangulationAgeIndicates the age since this device was most recently detected by the detecting AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.7.1.8
wsAPTriangulationSentryStatusTableThis table contains triangulation data to help the administrator determine which sentry APs are detecting the device.
SEQUENCE OF WsAPTriangulationSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.8
wsAPTriangulationSentryStatusEntryEach entry in this table contains triangulation information for the RF Scan entry.
WsAPTriangulationSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.8.1
wsAPSentryTriangulationMacAddrThe MAC address of the detected AP, this could be a physical radio interface or VAP MAC.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.1
wsAPSentryTriangulationIdIndex of the sentry triangulation entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.2
wsAPSentryTriangulationSentryMacAddrThe MAC address of the detecting AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.3
wsAPSentryTriangulationSentryRadioThe radio of the detecting AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.4
wsAPSentryTriangulationRssiReceived signal strength indicator in percent (0 to 100%).ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.5
wsAPSentryTriangulationStrengthReceived signal strength in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.6
wsAPSentryTriangulationNoiseNoise reported on the channel by the AP in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.7
wsAPSentryTriangulationAgeIndicates age since this device was most recently detected by the detecting AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.8.1.8
wsAPRogueClassificationStatusTableThis table contains rogue classification test results.
SEQUENCE OF WsAPRogueClassificationStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.9
wsAPRogueClassificationStatusEntryEach entry in this table contains triangulation information for the RF Scan entry.
WsAPRogueClassificationStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.9.1
wsAPRogueClassificationMacAddrThe MAC address of the detected AP, this could be a physical radio interface or VAP MAC.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.1
wsAPRogueClassificationTestIdThe rogue classification test id.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.2
wsAPRogueClassificationTestNameThe rogue classification test identifier.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.3
wsAPRogueClassificationDetectedIndicates whether this test detected the condition that it is designed to detect.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.4
wsAPRogueClassificationReportingAPMacThe MAC address of the managed AP that last reported detecting this condition.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.5
wsAPRogueClassificationReportingAPRadioThe radio number of the managed AP that last reported detecting this condition. Zero indicates no report availablero
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.6
wsAPRogueClassificationTestStateIndicates whether this test is configured to report rogues.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.7
wsAPRogueClassificationTestResultIndicates whether this test reported the device as rogue.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.8
wsAPRogueClassificationFirstTimeIndicates how long ago this test first detected the condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.9
wsAPRogueClassificationLastTimeIndicates how long ago this test last detected the condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.9.1.10
wsAPDeAuthenticationAttackStatusTableThis table contains the AP de-authentication attack status.
SEQUENCE OF WsAPDeAuthenticationAttackStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.10
wsAPDeAuthenticationAttackStatusEntryThis table contains information about APs against which the Cluster Controller initiated a de-authentication attack.
WsAPDeAuthenticationAttackStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.10.1
wsAPDeAuthenticationAttackStatusIdThe AP de-authentication attack status table index.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.10.1.1
wsAPDeAuthenticationAttackBSSIDBSSID of the AP against which the attack is launched.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.10.1.2
wsAPDeAuthenticationAttackChannelChannel on which the rogue AP is operating.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.10.1.3
wsAPDeAuthenticationAttackTimeTime since attack started on this AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.10.1.4
wsAPDeAuthenticationAttackAgeTime since RF Scan report about this AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.10.1.5
wsDetectedClientStatusTableThis table contains status parameters of clients that are currently detected.
SEQUENCE OF WsDetectedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.11
wsDetectedClientStatusEntryEach entry in this table contains detected client status parameters.
WsDetectedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.11.1
wsDetectedClientMacAddressDetected client MAC address.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.1
wsDetectedClientStatusThis object indicates client's status. Authenticated- Client is Authenticated with the system and is not Rogue Detected- Client is detected, not Authenticated, not rogue, and is not found in the Known Clients Database. Known- Client is detected, but is not authenticated. Black-Listed- Client tried to associate with the system, but was rejected due to MAC authentication. Rogue- Client failed of the the enabled threat tests.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.2
wsDetectedClientAuthStatusThis object indicates client's authentication status. Note that the Client Status can be Rogue, but the client can be Authenticated.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.3
wsDetectedClientEntryLastUpdatedAtThis object indicates time since any event has been received for this client that updated the detected client database entry.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.4
wsDetectedClientThreatDetectedStatusThis object indicates if any one of the threat detection tests have been triggered for this client. If the test is disabled the client won't be marked as Rogue, but administrator may still be interested in investigating why the threat triggered.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.5
wsDetectedClientThreatMitigationStatusThis object indicates whether threat mitigation has been done for this client.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.6
wsDetectedClientNameNickname from the Known Client Database. If client is not in the database then the nickname is blank.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.7
wsDetectedClientEntryCreateTimeIndicates the time the detected client entry was created.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.8
wsDetectedClientChannelthis object indicates channel number in which the client is dtectedro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.9
wsDetectedClientAuthRSSIIf the client is authenticated with the managed AP then this object indicates Received Signal Strength(RSSI) value reported by the AP with which the client is authenticated.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.10
wsDetectedClientAuthSignalThis object indicates the last signal strength(in dBm) reported by the managed AP with which the client is authenticated.ro
Integer32(-128..128)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.11
wsDetectedClientAuthNoiseThis object indicates the last channel noise(in dBm) reported by the managed AP with which the client is authenticated.ro
Integer32(-128..128)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.12
wsDetectedClientProbeReqRecordedThis object indicates the number of probe requests recorded so far during the probe collection interval.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.13
wsDetectedClientProbeCollectionIntvlThis object indicates how much time is left before the probe collection interval is done and the controller decides whether the client is a threat.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.14
wsDetectedClientHighestNumProbesThis object indicates the largest number of probes that the controller detected during the collection interval.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.15
wsDetectedClientAuthMsgsRecordedThis object indicates the number of 802.11 authentication messages recorded so far during the auth collection interval.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.16
wsDetectedClientAuthCollectionIntvlThis object indicates how much time is left before the authentication collection interval is done and the controller decides whether the client is a threat.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.17
wsDetectedClientHighestNumAuthMsgsThis object indicates the largest number of authentications that the controller detected during the collection interval.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.18
wsDetectedClientDeAuthMsgsRecordedThis object indicates the number of 802.11 de-authentication messages recorded so far during the de-auth collection interval.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.19
wsDetectedClientDeAuthCollectionIntvlThis object indicates how much time is left before the de-authentication collection interval is done and the controller decides whether the client is a threat.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.20
wsDetectedClientHighestNumDeAuthMsgsThis object indicates the largest number of de-authentication messages that the controller detected during the collection interval.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.21
wsDetectedClientAuthFailuresThis object indicates the number of 802.1X Authentication failures detected for this client.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.22
wsDetectedClientProbesDetectedThis object indicates the number of probes detected in the last RF Scan.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.23
wsDetectedClientBcastBSSIDProbesThis object indicates the number of probes to broadcast BSSID in the last RF Scan.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.24
wsDetectedClientBcastSSIDProbesThis object indicates the number of probes to broadcast SSID in the last RF Scan.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.25
wsDetectedClientSpecificBSSIDProbesThis object indicates the number of probes to specific BSSID in the last RF Scan.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.26
wsDetectedClientSpecificSSIDProbesThis object indicates the number of probes to specific SSID in the last RF Scan.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.27
wsDetectedClientLastNonBcastBSSIDThis object indicates the last non-broadcast BSSID detected in the RF Scan.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.28
wsDetectedClientLastNonBcastSSIDThis object indicates the last non-broadcast SSID detected in the RF Scan.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.29
wsDetectedClientThreatMitigationSentThis object indicates the time since the controller sent the last threat mitigation message to this client.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.30
wsDetectedClientEntryPurgeThis is an action object. Setting this object to enable will purge the detected client entry except entries for authenticated clients. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.31
wsDetectedClientEntryAcknowledgeThis is a command that allows the administrator to clear the rogue status for the entry in the Detected clients databasero
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.32
wsDetectedClientOUIDevice manufacturer information for this Detected client.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.11.1.33
wsDetectedClientPurgeAllThis is an action object. Setting this object to enable will purge all the detected clients entries except entries for authenticated clients. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.12
wsDetectedClientAcknowledgeAllThis is a command that allows the administrator to clear the rogue status for all entries in the Detected clients databasero
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.13
wsClientRogueClassificationStatusTableThis table contains rogue classification test results for clients.
SEQUENCE OF WsClientRogueClassificationStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.14
wsClientRogueClassificationStatusEntryEach entry in this table contains rogue classification test results for a client.
WsClientRogueClassificationStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.14.1
wsClientRogueClassificationMacAddrThe MAC address of the detected client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.1
wsClientRogueClassificationTestIdThe rogue classification test id.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.2
wsClientRogueClassificationTestNameThe rogue classification test identifier.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.3
wsClientRogueClassificationDetectedIndicates whether this test detected the condition that it is designed to detect.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.4
wsClientRogueClassificationReportingAPMacThe MAC address of the managed AP that last reported detecting this condition.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.5
wsClientRogueClassificationReportingAPRadioThe radio number of the managed AP that last reported detecting this condition. Zero indicates no report availablero
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.6
wsClientRogueClassificationTestStateIndicates whether this test is configured to report rogues.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.7
wsClientRogueClassificationTestResultIndicates whether this test reported the device as rogue.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.8
wsClientRogueClassificationFirstTimeIndicates how long ago this test first detected the condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.9
wsClientRogueClassificationLastTimeIndicates how long ago this test last detected the condition.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.14.1.10
wsDetectedClientTriangulationNonSentryStatusTableThis table contains triangulation data to help the administrator determine which three managed non-sentry APs are detecting the client along with the signal strength and the time stamp.
SEQUENCE OF WsDetectedClientTriangulationNonSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.15
wsDetectedClientTriangulationNonSentryStatusEntryEach entry in this table contains triangulation information for the Detected Client entry.
WsDetectedClientTriangulationNonSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.15.1
wsDetectedClientTriangulationMacAddrThe MAC address of the Detected Client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.1
wsDetectedClientTriangulationIdIndex of the non sentry triangulation entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.2
wsDetectedClientTriangulationNonSentryMacAddrThe MAC address of the detecting AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.3
wsDetectedClientTriangulationNonSentryRadioThe radio of the detecting AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.4
wsDetectedClientTriangulationRssiReceived signal strength indicator in percent (0 to 100%).ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.5
wsDetectedClientTriangulationStrengthReceived signal strength in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.6
wsDetectedClientTriangulationNoiseNoise reported on the channel by the AP in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.7
wsDetectedClientTriangulationAgeIndicates the time since this device was most recently detected by the detecting AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.15.1.8
wsDetectedClientTriangulationSentryStatusTableThis table contains triangulation data to help the administrator determine which three managed sentry APs are detecting the client along with the signal strength and the time stamp.
SEQUENCE OF WsDetectedClientTriangulationSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.16
wsDetectedClientTriangulationSentryStatusEntryEach entry in this table contains triangulation information for the Detected Client entry.
WsDetectedClientTriangulationSentryStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.9.16.1
wsDetectedClientSentryTriangulationMacAddrThe MAC address of the detected client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.1
wsDetectedClientSentryTriangulationIdIndex of the sentry triangulation entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.2
wsDetectedClientSentryTriangulationSentryMacAddrThe MAC address of the AP detecting the client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.3
wsDetectedClientSentryTriangulationSentryRadioThe radio of the AP detecting the client.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.4
wsDetectedClientSentryTriangulationRssiReceived signal strength indicator in percent (0 to 100%).ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.5
wsDetectedClientSentryTriangulationStrengthReceived signal strength in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.6
wsDetectedClientSentryTriangulationNoiseNoise reported on the channel by the AP in dBm (-127 to 127).ro
Integer32(-127..127)
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.7
wsDetectedClientSentryTriangulationAgeIndicates time since this device was most recently detected by the detecting AP.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.16.1.8
wsDetectedClientPreAuthenticationHistoryTableThis table contains pre-authentication history entries for detected clients.
SEQUENCE OF WsDetectedClientPreAuthenticationHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.9.17
wsDetectedClientPreAuthenticationHistoryEntryEach entry in this table contains details of pre-authentication events occured for the detected client.
WsDetectedClientPreAuthenticationHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.9.17.1
wsDetectedClientPreAuthenticationMacAddrThe MAC address of the detected client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.1
wsDetectedClientPreAuthenticationIdNumeric identifier for the preAuthentication entry.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.2
wsDetectedClientPreAuthenticationApMacThe Ethernet address of the AP with which client has pre-authenticated.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.3
wsDetectedClientPreAuthenticationApRadioIdThe radio number of this radio in the AP with which client has pre-authenticated.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.4
wsDetectedClientPreAuthenticationVapMacThe MAC address of the VAP to which client has roamed.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.5
wsDetectedClientPreAuthenticationSSIDThis object indicates the SSID used by the VAP.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.6
wsDetectedClientPreAuthenticationAgeIndicates time since this history event occured.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.7
wsDetectedClientPreAuthenticationStatusDesignates the pre-authentication operational status for this detected client.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.17.1.8
wsDetectedClientPreAuthenticationHistoryPurgeAllThis is an action object. Setting this object to enable will purge all the pre-authentication history entries for all the detected clients. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.18
wsDetectedClientRoamHistoryTableThis table contains roam history entries for detected clients.
SEQUENCE OF WsDetectedClientRoamHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.9.19
wsDetectedClientRoamHistoryEntryEach entry in this table contains details of roam events occured for the detected client.
WsDetectedClientRoamHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.9.19.1
wsDetectedClientRoamMacAddrThe MAC address of the detected client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.1
wsDetectedClientRoamIdNumeric identifier for the Roam entry.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.2
wsDetectedClientRoamApMacThe Ethernet address of the AP to which client has roamed.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.3
wsDetectedClientRoamApRadioIdThe radio number of this radio in the AP with which client has roamed.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.4
wsDetectedClientRoamVapMacThe MAC address of the VAP to which client has roamed.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.5
wsDetectedClientRoamSSIDThis object indicates the SSID used by the VAP.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.6
wsDetectedClientRoamAgeIndicates time since this roam history event occured.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.7
wsDetectedClientRoamStatusDesignates the roaming operational status for this detected client.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.19.1.8
wsDetectedClientRoamHistoryPurgeAllThis is an action object. Setting this object to enable will purge all the roaming history entries for all the detected clients. Read on this object will always return disable.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.9.20
snmpTrapsConfig
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.10
wsStatusTrapModeFlag to enable/disable SNMP traps for: WS Enabled, WS Disabled, WS Managed AP Database Full, WS Managed AP - AP Neighbor List Full, WS Managed AP - Client Neighbor List Full, WS - AP Failure List Full, RF Scan AP List Full, Client Association Database Full, Client Failure List Full.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.1
wsPeerWSTrapModeFlag to enable/disable SNMP traps for: Peer WS Discovered, Peer WS Failed, Peer WS Unknown Protocol Discovered.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.2
wsAPStateTrapModeFlag to enable/disable SNMP traps for: WS Managed AP Discovered, WS Managed AP Failed, WS Managed AP Unknown Protocol Discovered.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.3
wsAPFailureTrapModeFlag to enable/disable SNMP traps for: WS AP Association Failure, WS AP Authentication Failure.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.4
wsRogueAPTrapModeFlag to enable/disable SNMP traps for: RF Scan Rogue AP Detected.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.5
wsRFScanTrapModeFlag to enable/disable SNMP traps for: RF Scan New AP Detected, RF Scan New Client Detected. RF Scan Ad hoc Client Detected.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.6
wsClientStateTrapModeFlag to enable/disable SNMP traps for: Client Association Detected, Client Disassociation Detected, Client Roam Detected.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.7
wsWidsStatusModeFlag to enable/disable SNMP traps for: This controller is Cluster Controller, Rogues are Present in the Network, RF Scan Rogue AP Detected.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.8
wsTspecTrapModeFlag to enable/disable SNMP traps for: TSPEC Client ACM Bandwidth Exceeded, TSPEC Client Traffic Unauthorized.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.9
wsClientFailureTrapModeFlag to enable/disable SNMP traps for: Client Association Failure, Client Authentication Failure.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.10.10
wsMibInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.11
wsMibVersionThe version number of this MIB modulero
Integer32
.1.3.6.1.4.1.207.8.42.8.34.11.1
wsCapability
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.12
wsAPHardwareCapabilityTableThis table defines supported features for APs of specific hardware type. This is a read only table and is used by application to validate parameters
SEQUENCE OF WsAPHardwareCapabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.1
wsAPHardwareCapabilityEntryEach entry provides access point hardware type details for each AP hardware type supported by the WS.
WsAPHardwareCapabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.1.1
wsAPHWTypeIDNumeric identifier for the AP hardware type.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.12.1.1.1
wsAPHWTypeDescriptionDescriptive name of the AP hardware type.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.12.1.1.2
wsAPHWTypeRadioCountNumber of radios supported by this hardware type AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.12.1.1.3
wsAPImageTypeIDImage type for code download for this hardware type AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.12.1.1.4
wsAPHWDualBootSuppportDual boot support for this hardware type AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.12.1.1.5
wsAPHardwareRadioCapabilityTableThe AP harware radio capability table contain only those parameters that vary from one AP hardware type to another. Parameters that don't vary depending on AP type or radio type are not included in the table.This read-only table provides the user to view configurable parameters for the APs of specific hardware type through the profile.
SEQUENCE OF WsAPHardwareRadioCapabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.2
wsAPHardwareRadioCapabilityEntryEach entry provides radio capability details for each AP hardware type supported by the WS.
WsAPHardwareRadioCapabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.2.1
wsAPHWTypeRadioNumThe radio number of this radio in the AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.1
wsAPHWTypeRadioIDThe device id for this radio in the AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.2
wsAPHWTypeRadioDescriptionText description of this radio type.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.3
wsAPHWTypeRadioVapCountNumber of virtual access points supported by this radio.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.4
wsAPHWTypeRadioAmodeSupportFlag indicating whether this radio supports 802.11a mode.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.5
wsAPHWTypeRadioBGmodeSupportFlag indicating whether this radio supports 802.11bg mode.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.6
wsAPHWTypeRadioNmodeSupportFlag indicating whether this radio supports 802.11n configuration parameters.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.7
wsAPHWTypeRadioACmodeSupportFlag indicating whether this radio supports 802.11ac configuration parameters.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.12.2.1.8
wsAPImageTypeCapabilityTableThis table defines supported image types for APs. This is a read only table and is used by application to view possible image types
SEQUENCE OF WsAPImageTypeCapabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.3
wsAPImageTypeCapabilityEntryEach entry provides access point image type details for each AP image type supported by the WS.
WsAPImageTypeCapabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.3.1
wsAPImageTypeDescriptionDescriptive name of the AP image type.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.12.3.1.1
wsAPImageAvailabilityTableThis table lists the wireless controller stored AP code images.
SEQUENCE OF WsAPImageAvailabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.4
wsAPImageAvailabilityEntryEach entry provides the code version of an AP image stored on the wireless controller.
WsAPImageAvailabilityEntry
.1.3.6.1.4.1.207.8.42.8.34.12.4.1
wsAPImageAvailabilityThe code version of each AP image stored on the wireless controller.
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.12.4.1.1
l2centTunnel
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.13
wsL2CentTnnlVlanListTableThis table contains the list of layer 2 tunneled VLANs.
SEQUENCE OF WsL2CentTnnlVlanListEntry
.1.3.6.1.4.1.207.8.42.8.34.13.1
wsL2CentTnnlVlanListEntryA list of VLANs on which all frames are tunneled. The entries in this table are limited to 64.
WsL2CentTnnlVlanListEntry
.1.3.6.1.4.1.207.8.42.8.34.13.1.1
wsL2CentTnnlVlanIdVLAN ID on which all frames are tunneled.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.13.1.1.1
wsL2CentTnnlVlanRowStatusThis variable is used to create and delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.13.1.1.2
wsOuiDatabase
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.14
wsOuiTableThis table contains the list of OUIs that have been configured by the administrator. The entries in this table are limited to 64.
SEQUENCE OF WsOuiEntry
.1.3.6.1.4.1.207.8.42.8.34.14.1
wsOuiEntryA list of OUIs. Each entry contains OUI and descriptive name of the wireless device manufacturer. The administrator can enter up to 64 user-defined OUIs.
WsOuiEntry
.1.3.6.1.4.1.207.8.42.8.34.14.1.1
wsOuiValueThe OUI value for the AP or the client. Least significant bit of the first byte must be zero.ro
WsOui
.1.3.6.1.4.1.207.8.42.8.34.14.1.1.1
wsOuiDescriptionThe descriptive name for the manufacturer of AP or wireless client adapter.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.14.1.1.2
wsOuiRowStatusThis variable is used to create and delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.14.1.1.3
rrmNeighbor
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.15
wsRrmNeighborTableThis table displays the known neighbors of each AP/VAP pair as reported through RF scans that conform to the IEEE 802.11k standards for Radio Resource Measurement (RRM).
SEQUENCE OF WsRrmNeighborEntry
.1.3.6.1.4.1.207.8.42.8.34.15.1
wsRrmNeighborEntryEach entry provides information regarding known neighboring APs that may be suitable for client roaming.
WsRrmNeighborEntry
.1.3.6.1.4.1.207.8.42.8.34.15.1.1
wsRrmNeighborApMacAddrThe MAC address of the managed AP that detected the neighbor.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.1
wsRrmNeighborVapMacAddrThe MAC address of the VAP that detected the neighbor.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.2
wsRrmNeighborMacAddrThe MAC address of the detected neighbor.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.3
wsRrmNeighborRSSIThe RSSI (signal strength) of the detected neighbor.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.4
wsRrmNeighborSSIDThe SSID of the detected neighbor.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.5
wsRrmNeighborChannelThe channel of the detected neighbor.
Integer32(0..14|36|40|42|44|48|50|52|56|58|60| 64|100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.6
wsRrmNeighborAgeThe age, in seconds, of this table entry for the detected neighbor.
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.7
wsRrmNeighborAllPurgeThis is an action object used to purge all neighbors. Reads on this object will always return disable.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.8
wsRrmNeighborApPurgeThis is an action object used to purge all neighbors detected by the managed AP described by this entry. Reads on this object will always return disable.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.9
wsRrmNeighborVapPurgeThis is an action object used to purge all neighbors detected by the VAP described by this entry. Reads on this object will always return disable.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.15.1.1.10
rrmChannelLoad
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.16
wsRrmChannelLoadHistoryTableThis table displays the known channel load measurement history items. Channel load measurements are part of the IEEE 802.11k standards for Radio Resource Measurement (RRM).
SEQUENCE OF WsRrmChannelLoadHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.16.1
wsRrmChannelLoadHistoryEntryEach entry provides information regarding previous channel load measurement reports from clients .
WsRrmChannelLoadHistoryEntry
.1.3.6.1.4.1.207.8.42.8.34.16.1.1
wsRrmChannelLoadHistoryEntryIdA unique identifier for a history entry.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.1
wsRrmChannelLoadHistoryEntryApMacAddrThe MAC address of the managed AP associated to the client.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.2
wsRrmChannelLoadHistoryEntryClientMacAddrThe MAC address of client that conducted the measurement.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.3
wsRrmChannelLoadHistoryEntryChannelThe channel used for the measurement.
Unsigned32(0..14|36|40|42|44|48|50|52|56|58|60| 64|100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.4
wsRrmChannelLoadHistoryEntryAgeThe age of the measurement history entry.
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.5
wsRrmChannelLoadHistoryEntryLoadThe measured load, expressed as a percentage.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.6
wsRrmChannelLoadHistoryEntryDurationThe duration of the measurement, expressed in time units (TUs), where one TU equals 1024 microseconds.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.16.1.1.7
wsRrmChannelLoadCurrentRequest
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.16.2
wsRrmChannelLoadCurrentRequestClientMacAddrThe MAC address of client involved with the request.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.16.2.1
wsRrmChannelLoadCurrentRequestApMacAddrThe MAC address of the managed AP associated with the client involved with the request.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.16.2.2
wsRrmChannelLoadCurrentRequestChannelThe channel specified within the current request.
Unsigned32(0..14|36|40|42|44|48|50|52|56|58|60| 64|100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.16.2.3
wsRrmChannelLoadCurrentRequestDurationThe duration specified in the current request, expressed in time units (TUs), where one TU equals 1024 microseconds.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.16.2.4
wsRrmChannelLoadCurrentRequestStatusThe status of the current request.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.16.2.5
wsRrmChannelLoadCurrentRequestTimeRemainingThe time remaining for the current request.
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.16.2.6
wsRrmChannelLoadCurrentRequestAbortAborts a pending request if 'yes' given as value. Reads of this element will always return 'no'.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.16.2.7
wsRrmChannelLoadNewRequest
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.16.3
wsRrmChannelLoadNewRequestClientMacAddrThe MAC address of client chosen to execute the new request.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.16.3.1
wsRrmChannelLoadNewRequestChannelThe channel to be used in the next submitted request.
Unsigned32(0..14|36|40|42|44|48|50|52|56|58|60|64| 100|104|108|112|116|120|124|128|132| 136|140|149|152|153|157|160|161|165)
.1.3.6.1.4.1.207.8.42.8.34.16.3.2
wsRrmChannelLoadNewRequestDurationThe duration to be used in the next request, expressed in time units (TUs), where one TU equals 1024 microseconds.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.16.3.3
wsRrmChannelLoadNewRequestSendSends a new request if 'yes' given as value. Reads of this element will always return 'no'.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.16.3.4
tspec
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.17
tspecGlobal
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.17.1
wsGlobalTspecStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.17.1.1
wsTspecTotalVoiceTrafficStreamsTotal number of traffic streams currently established for the voice access category. For a Cluster Controller, this value represents the entire cluster.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.1.1.1
wsTspecTotalVideoTrafficStreamsTotal number of traffic streams currently established for the video access category. For a Cluster Controller, this value represents the entire cluster.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.1.1.2
wsTspecTotalTrafficStreamClientsTotal number of clients that currently possess one or more traffic streams in any access category. For a Cluster Controller, this value represents the entire cluster.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.1.1.3
wsTspecTotalTrafficStreamRoamingClientsTotal number of roaming clients that currently possess one or more traffic streams in any access category. For a Cluster Controller, this value represents the entire cluster.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.1.1.4
wsGlobalTspecStatisticsTableThis table contains global TSPEC statistics indexed on a per access category (AC) basis.
SEQUENCE OF WsGlobalTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.1.2
wsGlobalTspecStatisticsEntryEach entry contains global TSPEC statistics indexed on a per access category (AC) basis for the wireless controller. If this controller is a Cluster Controller, these object values represent the entire cluster.
WsGlobalTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1
wsTspecACIndexAccess category (AC) index used for referencing objects in the table row. Only those ACs that support mandatory admission control are available through this index. The currently supported AC index values are: 0 - Voice 1 - Video
TspecSuppAC
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.1
wsTotalWLANTspecPktsRecvdTotal packets received across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.2
wsTotalWLANTspecPktsTransmittedTotal packets transmitted across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.3
wsTotalWLANTspecBytesRecvdTotal bytes received across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.4
wsTotalWLANTspecBytesTransmittedTotal bytes transmitted across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.5
wsTotalWLANTspecsAcceptedTotal number of TSPECs accepted across all APs managed by this controller for the specified access category.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.6
wsTotalWLANTspecsRejectedTotal number of TSPECs rejected across all APs managed by this controller for the specified access category.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.7
wsTotalWLANRoamingTspecsAcceptedTotal number of TSPECs accepted from roaming clients across all APs managed by this controller for the specified access category. The value of this object is also included in the wsTotalWLANTspecsAccepted object.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.8
wsTotalWLANRoamingTspecsRejectedTotal number of TSPECs rejected from roaming clients across all APs managed by this controller for the specified access category. The value of this object is also included in the wsTotalWLANTspecsRejected object.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.1.2.1.9
tspecSwitch
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.17.2
wsSwitchTspecStatusTableThis table contains TSPEC status parameters for peer controllers of the wireless controller.
SEQUENCE OF WsSwitchTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.2.1
wsSwitchTspecStatusEntryEach entry describes the TPEC status parameters for a specific peer of the wireless controller.
WsSwitchTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1
wsSwitchTspecTotalVoiceTrafficStreamsTotal number of traffic streams currently established for the voice access category for the specified controller.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.1
wsSwitchTspecTotalVideoTrafficStreamsTotal number of traffic streams currently established for the video access category for the specified controller.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.2
wsSwitchTspecTotalTrafficStreamClientsTotal number of clients that currently possess one or more traffic streams in any access category for the specified controller.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.3
wsSwitchTspecTotalTrafficStreamRoamingClientsTotal number of roaming clients that currently possess one or more traffic streams in any access category for the specified controller.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.2.1.1.4
wsSwitchTspecStatisticsTableThis table contains WLAN TSPEC statistics on a per access category (AC) basis for each controller in the peer group. Only the Cluster Controller maintains entries for peer controllers. A non-Cluster Controller controller just keeps its local statistics.
SEQUENCE OF WsSwitchTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.2.2
wsSwitchTspecStatisticsEntryEach entry contains WLAN TSPEC statistics on a per access category (AC) basis for the specified wireless controller.
WsSwitchTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1
wsSwitchWLANTspecPktsRecvdTotal packets received across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.1
wsSwitchWLANTspecPktsTransmittedTotal packets transmitted across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.2
wsSwitchWLANTspecBytesRecvdTotal bytes received across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.3
wsSwitchWLANTspecBytesTransmittedTotal bytes transmitted across all APs managed by this controller for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.4
wsSwitchWLANTspecsAcceptedTotal number of TSPECs accepted across all APs managed by this controller for the specified access category.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.5
wsSwitchWLANTspecsRejectedTotal number of TSPECs rejected across all APs managed by this controller for the specified access category.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.6
wsSwitchWLANRoamingTspecsAcceptedTotal number of TSPECs accepted from roaming clients across all APs managed by this controller for the specified access category. This value of this object is also included in the wsSwitchWLANTspecsAccepted object.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.7
wsSwitchWLANRoamingTspecsRejectedTotal number of TSPECs rejected from roaming clients across all APs managed by this controller for the specified access category. The value of this object is also included in the wsSwitchWLANTspecsRejected object.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.2.2.1.8
tspecManagedAP
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.17.3
wsManagedAPTspecStatusTableThis table contains TSPEC status parameters for all APs managed by the controller.
SEQUENCE OF WsManagedAPTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.1
wsManagedAPTspecStatusEntryEach entry in this table contains TSPEC status parameters for a specific AP managed by the controller.
WsManagedAPTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1
wsManagedAPTspecNumActiveTrafficStreamsIndicates the current number of active traffic streams (TSs) for the specified access category of the WS managed AP.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1.1
wsManagedAPTspecNumTrafficStreamClientsIndicates the current number of clients with at least one active traffic stream (TS) for the specified access category of the WS managed AP.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1.2
wsManagedAPTspecNumTrafficStreamRoamingClientsIndicates the current number of roaming clients with at least one active traffic stream (TS) for the specified access category of the WS managed AP. The value of this object is also included in the wsManagedAPTspecNumTSClients object.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.1.1.3
wsManagedAPTspecStatisticsTableThis table contains TSPEC statistics available for all APs managed by the controller.
SEQUENCE OF WsManagedAPTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.2
wsManagedAPTspecStatisticsEntryEach entry in this table contains TSPEC statistics for a specific AP managed by the controller.
WsManagedAPTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1
wsManagedAPTspecPktsRecvdTotal packets received by this AP on the wireless network for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.1
wsManagedAPTspecPktsTransmittedTotal packets transmitted by this AP on the wireless network for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.2
wsManagedAPTspecBytesRecvdTotal bytes received by this AP on the wireless network for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.3
wsManagedAPTspecBytesTransmittedTotal bytes transmitted by this AP on the wireless network for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.4
wsManagedAPTspecsAcceptedTotal number of TSPECs accepted by this AP on the wireless network for the specified access category.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.5
wsManagedAPTspecsRejectedTotal number of TSPECs rejected by this AP on the wireless network for the specified access category.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.6
wsManagedAPRoamingTspecsAcceptedTotal number of TSPECs accepted from roaming clients by an AP on the wireless network for the specified access category. This value of this object is also included in the wsManagedAPTspecsAccepted object.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.7
wsManagedAPRoamingTspecsRejectedTotal number of TSPECs rejected from roaming clients by an AP on the wireless network for the specified access category. This value of this object is also included in the wsManagedAPTspecsRejected object.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.17.3.2.1.8
wsManagedAPRadioTspecStatusTableThis table contains TSPEC status parameters per radio interface for all APs managed by the controller.
SEQUENCE OF WsManagedAPRadioTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.3
wsManagedAPRadioTspecStatusEntryEach entry in this table contains TSPEC status parameters per radio interface for a specific AP managed by the controller.
WsManagedAPRadioTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1
wsManagedAPRadioTspecOperStatusIndicates the current operational status for the specified access category on this radio. If enabled(1), this access category operates in accordance with admission control mandatory (ACM) procedures.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.1
wsManagedAPRadioTspecNumActiveTrafficStreamsIndicates the current number of active traffic streams (TSs) for the specified access category on this radio.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.2
wsManagedAPRadioTspecNumTrafficStreamClientsIndicates the current number of clients with at least one active traffic stream (TS) for the specified access category on this radio.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.3
wsManagedAPRadioTspecNumTrafficStreamRoamingClientsIndicates the current number of roaming clients with at least one active traffic stream (TS) for the specified access category on this radio. The value of this object is also included in the wsManagedAPRadioTspecNumTSClients object.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.4
wsManagedAPRadioTspecMediumTimeAdmittedCurrent sum of medium times allocated to clients with an active traffic stream (TS) belonging to the specified access category on this radio.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.5
wsManagedAPRadioTspecMediumTimeUnallocatedAmount of configured medium time not currently allocated for the specified access category on this radio that is available for both non-roaming and roaming clients.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.6
wsManagedAPRadioTspecMediumTimeRoamingUnallocatedAmount of configured medium time not currently allocated for the specified access category on this radio that is available for roaming clients only.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.3.1.7
wsManagedAPRadioTspecStatisticsTableThis table contains TSPEC statistics available per radio interface for all APs managed by the controller.
SEQUENCE OF WsManagedAPRadioTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.4
wsManagedAPRadioTspecStatisticsEntryEach entry in this table contains TSPEC statistics per radio interface for a specific AP managed by the controller.
WsManagedAPRadioTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1
wsManagedAPRadioTspecPktsRecvdTotal packets received on this radio for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.1
wsManagedAPRadioTspecPktsTransmittedTotal packets transmitted on this radio for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.2
wsManagedAPRadioTspecBytesRecvdTotal bytes received on this radio for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.3
wsManagedAPRadioTspecBytesTransmittedTotal bytes transmitted on this radio for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.4.1.4
wsManagedAPVAPTspecStatusTableThis table contains TSPEC status parameters for each VAP on the specified radio interface for all APs managed by the controller.
SEQUENCE OF WsManagedAPVAPTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.5
wsManagedAPVAPTspecStatusEntryEach entry in this table contains TSPEC status parameters for each VAP on the specified radio interface for a specific AP managed by the controller.
WsManagedAPVAPTspecStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1
wsManagedAPVAPTspecOperStatusIndicates the current operational status for the specified access category on this VAP. If enabled(1), this access category operates in accordance with admission control mandatory (ACM) procedures.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.1
wsManagedAPVAPTspecNumActiveTrafficStreamsIndicates the current number of active traffic streams (TSs) for the specified access category on this VAP.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.2
wsManagedAPVAPTspecNumTrafficStreamClientsIndicates the current number of clients with at least one active traffic stream (TS) for the specified access category on this VAP.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.3
wsManagedAPVAPTspecNumTrafficStreamRoamingClientsIndicates the current number of roaming clients with at least one active traffic stream (TS) for the specified access category on this VAP. The value of this object is also included in the wsManagedAPVAPTspecNumTSClients object.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.4
wsManagedAPVAPTspecMediumTimeAdmittedCurrent sum of medium times allocated to clients with an active traffic stream (TS) belonging to the specified access category on this VAP.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.5
wsManagedAPVAPTspecMediumTimeUnallocatedAmount of configured medium time not currently allocated for the specified access category on this VAP that is available for both non-roaming and roaming clients.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.6
wsManagedAPVAPTspecMediumTimeRoamingUnallocatedAmount of configured medium time not currently allocated for the specified access category on this VAP that is available for roaming clients only.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.3.5.1.7
wsManagedAPVAPTspecStatisticsTableThis table contains TSPEC statistics available for each VAP on the specified radio interface for all APs managed by the controller.
SEQUENCE OF WsManagedAPVAPTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.6
wsManagedAPVAPTspecStatisticsEntryEach entry in this table contains TSPEC statistics for each VAP on the specified radio for a specific AP managed by the controller.
WsManagedAPVAPTspecStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1
wsManagedAPVAPTspecPktsRecvdTotal packets received on this VAP for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.1
wsManagedAPVAPTspecPktsTransmittedTotal packets transmitted on this VAP for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.2
wsManagedAPVAPTspecBytesRecvdTotal bytes received on this VAP for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.3
wsManagedAPVAPTspecBytesTransmittedTotal bytes transmitted on this VAP for all traffic streams belonging to the specified access category.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.3.6.1.4
tspecClient
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.17.4
wsAssociatedClientTsStatusTableThis table contains TSPEC traffic stream status parameters for clients currently associated with managed APs. Only clients possessing one or more active traffic streams appear in this table.
SEQUENCE OF WsAssociatedClientTsStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.4.1
wsAssociatedClientTsStatusEntryEach entry in this table contains TSPEC traffic stream status parameters for a specific client that is currently associated with the WS managed AP.
WsAssociatedClientTsStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1
wsAssociatedClientTsTidThe traffic stream identifier (TID) indicated in the TSPEC that defines the traffic stream for the specified access category for the wireless client. Each traffic stream for a particular client must have a unique TID in the range 0-7, but per specification, any TID may map to any user priority and hence to any access category.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.1
wsAssociatedClientTsAccessCategoryAccess category (AC) of this client traffic stream. Only those ACs that support mandatory admission control are used. The currently supported AC values are: 0 - Voice 1 - Video
TspecSuppAC
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.2
wsAssociatedClientTsDirectionThe direction of the client traffic stream (TS) as indicated in the TSPEC. An uplink(1) TS monitors data traffic flowing from client station to AP, while a downlink(2) TS pertains to the opposite direction. A bidirectional(3) TS covers both directions and is treated as an uplink TS and downlink TS operating concurrently for the specified access category.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.3
wsAssociatedClientTsUserPriorityThe user priority indicated in the TSPEC that defines the traffic stream for the specified access category for the wireless client. QoS Data frames to/from the client containing this user priority are categorized as belonging to the traffic stream, depending on direction.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.4
wsAssociatedClientTsMediumTimeIndicates the amount of time this client is allowed to access the wireless medium each second for the specified access category through this traffic stream. This value is calculated by the AP based on various parameters supplied in the TSPEC add request from the client. The medium time is specified as the number of 32 microsecond time units the client is allowed to access the wireless network each second. This is referred to as units of 32 usec-per-sec and is generally treated as an average value, with any over-usage in one interval deducted from the alotted medium time for the next interval.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.5
wsAssociatedClientTsExcessUsageEventsThe number of times the wireless client has appreciably exceeded the medium time established for its TSPEC. The actual measure of 'appreciably exceeded' is implementation-dependent, but it is not necessarily a single occurrence of exceeding the medium time for any given one second interval. Rather, this event may be indicated after repeated violations of the medium time over some measurement interval, and is intended as an heuristic to identify a wireless client whose TSPEC medium time may be set too low relative to its actual traffic stream requirements. This object reflects the number of excess usage events that have accumulated, but have not been reported, through the Trap Manager, with such reporting enabled by the wsTspecTrapMode object. Whenever a trap report is generated for this event, the value of this object restarts counting from zero.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.6
wsAssociatedClientTsRoamingClientIndicatorA flag indicating whether this traffic stream was established by a wireless client that was considered to be a roaming client.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.17.4.1.1.7
wsAssociatedClientTsStatisticsTableThis table contains TSPEC traffic stream statistics for clients currently associated with managed APs. Only clients possessing one or more active traffic streams appear in this table.
SEQUENCE OF WsAssociatedClientTsStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.4.2
wsAssociatedClientTsStatisticsEntryEach entry in this table contains TSPEC traffic stream statistics for a specific client that is currently associated with the WS managed AP.
WsAssociatedClientTsStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1
wsAssociatedClientTsPktsRecvdTotal packets received from the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either uplink(1) or bidirectional(3).
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.1
wsAssociatedClientTsPktsTransmittedTotal packets transmitted to the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either downlink(2) or bidirectional(3).
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.2
wsAssociatedClientTsBytesRecvdTotal bytes received from the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either uplink(1) or bidirectional(3).
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.3
wsAssociatedClientTsBytesTransmittedTotal bytes transmitted to the client station for the traffic stream belonging to the specified access category. This object is only valid when the wsAssociatedClientTsDirection is either downlink(2) or bidirectional(3).
Counter64
.1.3.6.1.4.1.207.8.42.8.34.17.4.2.1.4
provisioning
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.18
wsAPProvisioningTableThis table contains data for provisioning access points and also the AP provisioning status information.
SEQUENCE OF WsAPProvisioningEntry
.1.3.6.1.4.1.207.8.42.8.34.18.1
wsAPProvisioningEntryEach entry has parameters that indicate AP provisioned values and also parameters to configure new provisioning information.
WsAPProvisioningEntry
.1.3.6.1.4.1.207.8.42.8.34.18.1.1
wsAPProvMacAddressMAC address of an AP.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.1
wsAPProvIPAddressNetwork IP address of the AP.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.2
wsAPProvPrimarySwitchIPProvisioned primary controller IP address on the AP.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.3
wsAPProvBackupSwitchIPProvisioned backup controller IP address on the AP.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.4
wsAPProvMutualAuthModeThe mutual authentication mode configured in the AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.5
wsAPProvUnmanagedAPReprovModeThe configured AP re-provisioning mode when in unmanaged state in the AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.6
wsAPProvAgeTime since any information has been received from this AP.
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.7
wsAPProvNewPrimarySwitchIPThe IP address of the primary controller which the adminstrator wants to provision the AP.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.8
wsAPProvNewBackupSwitchIPThe IP address of the backup controller which the administrator wants to provision the AP.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.9
wsAPProvNewProfileIdProfile ID to be configured in the local Valid AP database of the primary and backup controllers.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.10
wsAPProvCommandThis parameter triggers the AP provisioning process for this AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.11
wsAPProvStatusStatus of the most recently issued AP provisioning command.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.12
wsAPProvCertProfileTxStatusStatus of the last AP profile and X.509 certificate distribution to primary and backup controllers.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.13
wsAPProvEntryPurgeThis is an action object. Setting this object to enable will delete the AP entry if it is unmanaged. Reads on this object will always return disabled.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.1.1.14
wsAPProvisioningInitiateAllStart provisioning of all the APs in the database.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.2
wsAPProvisioningDeleteAllDelete all unmanaged AP provisioning entries
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.3
wsNetworkExchangeCertificatesTrigger the wireless controllers and APs to exchange X.509 certificates. This command can be triggered only when mutual authentication is already enabled on the network.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.4
wsSwitchProvIPAddressIP address of the controller from which this controller obtains the provisioning information.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.5
wsSwitchProvStatusStatus of controller provisioning activity.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.6
wsSwitchCertReqTargetIP address of the wireless controller from which this controller requests an X.509 certificate
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.18.7
wsSwitchCertReqStatusStatus of X.509 certificate request status.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.8
wsSwitchProvisioningCommandThis parameter triggers the controller provisioning with the controller specified in the Provisioning controller IP address
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.9
wsSwitchCertReqCommandThis parameter initiates the X.509 certificate request from the controller specified in the Certificate Request Target.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.18.10
wdsManagedAP
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.19
wsWDSAPGroupTableThe following
SEQUENCE OF WsWDSAPGroupEntry
.1.3.6.1.4.1.207.8.42.8.34.19.1
wsWDSAPGroupEntryEach entry
WsWDSAPGroupEntry
.1.3.6.1.4.1.207.8.42.8.34.19.1.1
wsWDSAPGroupIdUnique WDS Group Id for each entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.1.1.1
wsWDSAPGroupNameAP configuration profile name.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.19.1.1.2
wsWDSAPGroupSpanningTreeThis varible allows the spanning tree mode enabling or disabling in a Managed AP Group.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.1.1.3
wsWDSAPGroupPasswordIndicates password to be used to form WDS links among the APs in a Managed AP Group. If password is configured, read on this object will return '*****'.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.19.1.1.4
wsWDSAPGroupRowStatusThis variable is used to create or delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.1.1.5
wsWDSAPGroupAPTableList of the AP MAC addresses in the AP Group
SEQUENCE OF WsWDSAPGroupAPEntry
.1.3.6.1.4.1.207.8.42.8.34.19.2
wsWDSAPGroupAPEntryPer Group Group Id and MAC address of the AP.
WsWDSAPGroupAPEntry
.1.3.6.1.4.1.207.8.42.8.34.19.2.1
wsWDSAPGroupAPMacAddressAP MAC address in the WDS AP Groupro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.2.1.1
wsWDSAPGroupAPStpPriorityAP's STP priority in the WDS AP Group
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.2.1.2
wsWDSAPGroupAPEntryRowStatusThis variable is used to create or delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.2.1.3
wsWDSAPLinkTableThis table contains the WDS AP Links created on the controller.
SEQUENCE OF WsWDSAPLinkEntry
.1.3.6.1.4.1.207.8.42.8.34.19.3
wsWDSAPLinkEntryEach entry in this table contains parameters for the WDS link of WDS AP Group in the Wireless network.
WsWDSAPLinkEntry
.1.3.6.1.4.1.207.8.42.8.34.19.3.1
wsWDSAPLinkSourceMacAddrMAC Address of one End-Point of WDS link.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.3.1.1
wsWDSAPLinkSourceRadioRadio Number of the WDS Link End-Point on the Source AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.3.1.2
wsWDSAPLinkDestMacAddrMAC Address of another End-Point of WDS link.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.3.1.3
wsWDSAPLinkDestRadioRadio Number of the WDS Link End-Point on the Destination AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.3.1.4
wsWDSAPLinkPathCostSpanning Tree path cost for the WDS AP Link.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.3.1.5
wsWDSAPLinkRowStatusThis variable is used to create or delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.3.1.6
wsWDSAPGroupStatusTableThis table contains status parameters for the WDS APs created on the controller.
SEQUENCE OF WsWDSAPGroupStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.19.4
wsWDSAPGroupStatusEntryEach entry in this table contains status parameters for the WDS Group configured in WDS group database.
WsWDSAPGroupStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.19.4.1
wsWDSConfigAPCountNumber of APs configured by the Administrator in this WDS AP Group.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.1
wsWDSConnectedAPCountNumber of APs managed by the controller that are members of this WDS AP Group.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.2
wsWDSRootAPCountNumber of Root APs managed by the controller that are members of this WDS AP Group.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.3
wsWDSSatelliteAPCountNumber of Satellite APs managed by the controller that are members of this WDS AP Group.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.4
wsWDSAPRootBridgeMAC Address of the device elected as the Spanning Tree Root Bridge.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.5
wsWDSAPRootDeviceTypeThe type of device elected as the Spanning Tree Root bridge.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.6
wsWDSConfigWDSLinkCountNumber of configured bidirectional links in the WDS AP Group.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.7
wsWDSDetectedWDSLinkCountNumber of WDS links detected in the system.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.8
wsWDSBlockedWDSLinkCountNumber of WDS links blocked by the spanning tree protocol.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.9
wsWDSGroupNewPasswordThis Password is sent to all controllers and APs when the Change-Password command is initiadted by the administrator for this WDS Group. When passwod is configured this object will always return '*****'.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.10
wsWDSGroupChangePasswdStartThis action object is used to: - start - Start the WDS Group password change for the peer controllers and the managed APs. - Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.11
wsWDSGroupChangePasswdStatusStatus of the last invocation of the password change protocol.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.4.1.12
wsWDSAPStatusTableThis table contains status parameters for the WDS APs created on the controller.
SEQUENCE OF WsWDSAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.19.5
wsWDSAPStatusEntryEach entry in this table contains status parameters for the WDS AP configured in WDS group database.
WsWDSAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.19.5.1
wsWDSAPMacAddrMAC Address of the WDS AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.1
wsWDSAPConnectionStatusFlag indicating whether the AP is currently being managed by one of the Wireless controllers in the cluster.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.2
wsWDSAPSatelliteModeFlag indicating whether the AP is a Satellite AP connected via WDS link or a Root AP connected via the wire to the campus network.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.3
wsWDSAPSTPRootModeFlag indicating whether the AP is the root of the spanning tree.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.4
wsWDSAPSTPCostSpanning Tree Path Cost to the root.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.5
wsWDSAPEthPortSTPStatusSpanning Tree Status of the Ethernet Port.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.6
wsWDSAPEthPortModeEthernet Port Mode.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.7
wsWDSAPEthPortLinkStateLink State of Ethernet Port.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.5.1.8
wsWDSLinkStatusTableThis table contains status parameters for the WDS Links created on the controller.
SEQUENCE OF WsWDSLinkStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.19.6
wsWDSLinkStatusEntryEach entry in this table contains status parameters for the WDS link created on the Wireless network.
WsWDSLinkStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.19.6.1
wsWDSSourceMacAddrMAC Address of one End-Point of WDS link.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.1
wsWDSSourceRadioRadio Number of the WDS Link End-Point on the Source AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.2
wsWDSDestMacAddrMAC Address of another End-Point of WDS link.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.3
wsWDSDestRadioRadio Number of the WDS Link End-Point on the Destination AP.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.4
wsWDSLinkSourceEndPointDetectedFlag indicating whether AP specified by the Destination MAC detected the AP specified by the source MAC.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.5
wsWDSLinkDestEndPointDetectedFlag indicating whether AP specified by the Source MAC detected the AP specified by the Destination MAC.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.6
wsWDSLinkSourceSTPStateSpanning Tree State of the link on the source AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.7
wsWDSLinkDestSTPStateSpanning Tree State of the link on the destination AP.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.8
wsWDSLinkAggregationModeWhen parallel links are defined between two APs, this parameter indicates whether this link is part of the aggregation link pair.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.6.1.9
wsWDSLinkStatisticsTableThis table contains statistics available for each AP managed by the controller.
SEQUENCE OF WsWDSLinkStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.19.7
wsWDSLinkStatisticsEntryEach entry in this table contain statistics available for each AP managed by the controller.
WsWDSLinkStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.19.7.1
wsWDSLinkSourceAPPktsSentTotal number of packets transmitted by the Source AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.1
wsWDSLinkSourceAPBytesSentTotal number of bytes transmitted by the source AP on the link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.2
wsWDSLinkSourceAPPktsRcvdTotal number of packets received by the Source AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.3
wsWDSLinkSourceAPBytesRcvdTotal number of bytes received by the Source AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.4
wsWDSLinkDestAPPktsSentTotal number of packets transmitted by the Destination AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.5
wsWDSLinkDestAPBytesSentTotal number of bytes transmitted by the Destination AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.6
wsWDSLinkDestAPPktsRcvdTotal number of packets received by the Destination AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.7
wsWDSLinkDestAPBytesRcvdTotal Number of bytes received by the Destination AP on the WDS link.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.19.7.1.8
wsWDSGroupConfigRequestActionThis action object is used to: - start - Start the WDS Group config push to the peer controllers and the managed APs. - Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.19.8
deviceLocation
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.20
wsDevLocBldngTableThis table contains data for configuration parameters for device location.
SEQUENCE OF WsDevLocBldngEntry
.1.3.6.1.4.1.207.8.42.8.34.20.1
wsDevLocBldngEntryEach entry in this table contains building parameters.
WsDevLocBldngEntry
.1.3.6.1.4.1.207.8.42.8.34.20.1.1
wsDevLocBldngNumIndicates building number for a particular building.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.20.1.1.1
wsDevLocBldngDescThe building description for a particular building.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.20.1.1.2
wsDevLocFlrCountIndicates floor count for a particular building.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.20.1.1.3
wsDevLocApCountIndicates AP count for a particular building.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.20.1.1.4
wsDevLocBldngRowStatusThis variable is used to create and delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.1.1.5
wsDevLocBldngFlrTableThis table contains data for configuration parameters for device location building and floor.
SEQUENCE OF WsDevLocBldngFlrEntry
.1.3.6.1.4.1.207.8.42.8.34.20.2
wsDevLocBldngFlrEntryEach entry in this table contains building floor parameters.
WsDevLocBldngFlrEntry
.1.3.6.1.4.1.207.8.42.8.34.20.2.1
wsDevLocBldngFlrNumIndicates floor number for a particular building.
Integer32
.1.3.6.1.4.1.207.8.42.8.34.20.2.1.1
wsDevLocBldngFlrDescThe floor description for a particular floor.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.20.2.1.2
wsDevLocBldngFlrApCountIndicates AP count for a particular building-floor.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.20.2.1.3
wsDevLocFlrRowStatusThis variable is used to create and delete entries in the table.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.2.1.4
wsDevLocManagedApTableThis table contains data for configuration parameters for device location building, floor and AP.
SEQUENCE OF WsDevLocManagedApEntry
.1.3.6.1.4.1.207.8.42.8.34.20.3
wsDevLocManagedApEntryEach entry in this table contains building floor parameters.
WsDevLocManagedApEntry
.1.3.6.1.4.1.207.8.42.8.34.20.3.1
wsDevLocManagedApMacThe MAC address of the AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.3.1.1
wsDevLocMeasurementUnitMeasurement Units in Meters/Feet.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.3.1.2
wsDevLocManagedApXCoordThis indicates the X-coordinate of the AP.ro
Integer32(-3000..3000)
.1.3.6.1.4.1.207.8.42.8.34.20.3.1.3
wsDevLocManagedApYCoordThis indicates the Y-coordinate of the AP.ro
Integer32(-3000..3000)
.1.3.6.1.4.1.207.8.42.8.34.20.3.1.4
wsDevLocManagedApRowStatusThis variable is used to create and delete entries in the table. AP entry should be created with Measurement Unit and XY-Coordinates.ro
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.3.1.5
wsOnDemandTrigger
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.20.4
wsOnDemandTriggerDeviceTypeType of the device to be located.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.4.1
wsOnDemandTriggerDeviceMACAddressAP or Client MAC address whose location the Administrator want to find.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.4.2
wsOnDemandTriggerBuildingNumberBuilding number in which to search for the target device. Please note that only configured buildings will be accepted. Buildings with no configured floors are not accepted. Value 0 is used to indicate search in all of the buildings in the system. Value 0 is accepted only if there exists any configured building-floor. Setting building to 0 will automatically reset floor value to 0.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.4.3
wsOnDemandTriggerFloorNumberFloor Number on which to search. Please note that only configured floor numbers for the specified building will be accepted. Value 0 is used to indicate search in all of the floors in the specified building. Value 0 is accepted only if there exists any configured floor in the current building.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.4.4
wsOnDemandTriggerUseRadiosThis object Indicates if the network should use only sentry radios to do the search or both sentry and operational mode radios.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.4.5
wsOnDemandTriggerStatusStatus of the last invoked On-Demand location procedure.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.4.6
wsOnDemandTriggerNumOfAPsNumber of managed APs that are available for locating the target device in the building/floor/sentry scope specified by the administrator.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.4.7
wsOnDemandTriggerStartTrigger new On-Demand location procedure for the device specified in the configured building and floors. If On-Demand procedure is already running then setting this parameter has no effect.A read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.4.8
wsOnDemandTriggerGlobalStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.20.5
wsOnDemandTriggerGlobalStatusDeviceTypeFlag indicating whether the device is an AP or a Wireless Client.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.5.1
wsOnDemandTriggerGlobalStatusDeviceMACAddressAP or Client MAC address whose location was requested.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.5.2
wsOnDemandTriggerGlobalStatusBuildingNumberBuilding number in which to search for the target device was done. Value 0 is used to indicate search in all of the buildings in the system.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.3
wsOnDemandTriggerGlobalStatusFloorNumberFloor Number on which the search was done. Value 0 is used to indicate search in all of the floors in the specified building.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.4
wsOnDemandTriggerGlobalStatusUsedRadiosFlag indicating whether the network used only sentry radios to do the search or both sentry and operational mode radios.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.5.5
wsOnDemandTriggerGlobalStatusCurrentStatusCurrent status of the last invocation of the On-Demand Location Procedure.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.5.6
wsOnDemandTriggerGlobalStatusSearchTimeTime since the On-Demand Location triggered.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.20.5.7
wsOnDemandTriggerGlobalStatusNumOfLocatorAPsNumber of managed APs that were used for locating the target device.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.8
wsOnDemandTriggerGlobalStatusNumOfDetectedAPsNumber of managed APs that detected the device.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.9
wsOnDemandTriggerGlobalStatusNumOfDetectedBuildingsNumber of buildings where managed APs detected the target device.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.10
wsOnDemandTriggerGlobalStatusNumOfDetectedFloorsNumber of building floors where managed APs detected the target device. Floors from different buildings may be included in this status.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.11
wsOnDemandTriggerGlobalStatusHighestSignalFoundBuildingBuilding number in which the target device was detected by a managed AP with the highest RSSI. Value of 0 for this object indicates that device is not detected in any of the buildings.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.12
wsOnDemandTriggerGlobalStatusHighestSignalFoundFloorFloor number on which the target device was detected by a managed AP with the highest RSSI. Value of 0 for this object indicates that device is not detected in any of the floors.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.5.13
wsOnDemandTriggerFloorStatus
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.20.6
wsOnDemandTriggerFloorStatusTableThis table contains the location record for each building floor.
SEQUENCE OF WsOnDemandTriggerFloorStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.20.6.1
wsOnDemandTriggerFloorStatusEntryLocation record. Each entry contains location status of the target device with respect to building anf floor numbers.
WsOnDemandTriggerFloorStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1
wsOnDemandTriggerFloorStatusBuildingNumBuilding number.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.1
wsOnDemandTriggerFloorStatusFloorNumFloor numberro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.2
wsOnDemandTriggerFloorStatusDeviceFoundFlag indicating whether the device is found on this floor.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.3
wsOnDemandTriggerFloorStatusNumOfAPsNumber of APs located on this floor that detected the device.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.4
wsOnDemandTriggerFloorStatusSolutionTypeFlag indicating whether the probability map is a circle around the managed AP, or the solution is an X,Y coordinate.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.5
wsOnDemandTriggerFloorStatusXCoordinateX-axis offset. The parameter is applicable to the Circle and Point solution.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.6
wsOnDemandTriggerFloorStatusYCoordinateY-axis offset. The parameter is applicable to the Circle and Point solution.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.7
wsOnDemandTriggerFloorStatusCircleRadiusFor the Circle solution this parameter represents the radius from the X,Y coordinate where the device is most likely to be located. For the Point solution this value is not applicable and is set to 0.ro
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.8
wsOnDemandTriggerFloorStatusSigmaThe standard deviation for the location. The parameter is applicable to Circle and Point solutions. For the Circle solution the Sigma represents the offset from Circle Radius. For the Point solution the sigma represents the radius from the X,Y coordinate.ro
INTEGER
.1.3.6.1.4.1.207.8.42.8.34.20.6.1.1.9
wsTriangulationLocStatusTableThis table contains data for triangulation location and status information.
SEQUENCE OF WsTriangulationLocStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.20.7
wsTriangulationLocStatusEntryEach entry has parameters that indicate triangulation location status values.
WsTriangulationLocStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.20.7.1
wsTriangLocMacAddressMAC address of an AP or Client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.1
wsTriangLocDataTypeThis parameter indicates whether the location data is present for this device.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.2
wsTriangLocStatusThe status of the last iteration of the location computation algorithm.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.3
wsTriangLocDeviceTypeThis parameter indicates device type whether AP or Client.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.4
wsTriangLocAgeTime since the last successful location computation.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.5
wsTriangLocBldngIndicates building number in which device is detected.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.6
wsTriangLocFlrIndicates floor number in which device is detected.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.7
wsTriangLocXCoordThis indicates the X axis offset of the device from some arbitrary 0,0 point on the building floor.ro
Integer32(-3000..3000)
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.8
wsTriangLocYCoordThis indicates the Y axis offset of the device from some arbitrary 0,0 point on the building floor.ro
Integer32(-3000..3000)
.1.3.6.1.4.1.207.8.42.8.34.20.7.1.9
authenticatedClient
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.42.8.34.21
wsAuthenticatedClientStatusTableThis table contains status parameters of clients that are currently associated with managed APs.
SEQUENCE OF WsAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.1
wsAuthenticatedClientStatusEntryEach entry in this table contain client status parameters assocaited with the WS managed AP.
WsAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.1.1
wsAuthenticatedClientMacAddressAuthenticated client MAC address.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.1
wsAuthenticatedClientTunnelIpAddressIndicates network IP address of the client station, 0.0.0.0 indicates unknown. Tunnel IP subnet is present only for clients authenticated with tunneled VAPs.
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.2
wsAuthenticatedClientUserNameIndicates user name of the client that have authenticated via 802.1x, clients on networks with other security modes will not have a user name.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.3
wsAuthenticatedClientSSIDIndicates the network on which the client is connected.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.4
wsAuthenticatedClientVLANIf client is on VAP using VLAN data forwarding mode, indicates current assigned VLAN.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.5
wsAuthenticatedClientStatusThis object indicates client's status.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.6
wsAuthenticatedClientTxDataRateIndicates the data rate, AP will actually support in setting up communications with client stations represented by a count from 2 - 1200, corresponding to data rates in multiples of 500 kbit/s from 1 Mbit/s to 600 Mbit/s. Supported Data Rate Mbps 2 1 4 2 11 5.5 12 6 18 9 and so on.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.7
wsAuthenticatedClientInactivePeriodFor a current association, period of time that the AP has not seen any traffic for the client.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.8
wsAuthenticatedClientDisassociateActionThis is an action object. Setting this object to start will initiate the disassociation of associated client. Read on this object will always return none.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.9
wsAuthenticatedClientAgeIndicates time since the controller has received new data for this client.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.10
wsAuthenticatedClientAssociatingSwitchThis object indicates whether the client is associated to an AP managed by this controller or peer-controller.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.11
wsAuthenticatedClientSwitchMacAddressMAC address of the WS associating the client.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.12
wsAuthenticatedClientSwitchIpAddressIP address of the WS associating the client.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.13
wsAuthenticatedClientDot11nCapableFlag indicating whether this client is capable of 802.11n operation.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.14
wsAuthenticatedClientStbcCapableFlag indicating whether this client is capable of Space Time Block Code (STBC) operation.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.15
wsAuthenticatedClientDistTunnelStatusIndicates whether L2 Distributed Tunneling is Enabled or Disabledro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.16
wsAuthenticatedClientDistTunnelRoamStatusIndicates whether the client is using the distrubuted tunnel or not. Also indicates if it is a roamed client or not.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.17
wsAuthenticatedClientDistTunnelHomeAPMacIndicates MAC Address of the client's Home AP. Here the client should be associated with the network on which the L2 Distributed Tunneling is enabled.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.18
wsAuthenticatedClientDistTunnelAssocAPMacMAC Address of the client's Association AP to which the client has roamed to.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.19
wsAuthenticatedClientAPMacAddressMAC Address of the AP to which client is Authenticated.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.20
wsAuthenticatedClientBSSIDBSSID of the VAP to which client is associated.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.21
wsAuthenticatedClientRadioInterfaceIndicates the radio interface on which client is associated.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.22
wsAuthenticatedClientChannelIndicates channel for associated client entry.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.23
wsAuthenticatedClientNwTimeIndicates time since this client first authenticated with the network.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.24
wsAuthenticatedClientIpAddressIndicates network IPv4 address of the client station detetecd through ARP snooping, 0.0.0.0 indicates unknown.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.25
wsAuthenticatedClientNetBiosNameNetBios Name of the client.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.26
wsAuthenticatedClientRRMSupportedIndicates if the Radio Resource Management (RRM) portion of the IEEE 802.11k standard is supported by client and RRM is enabled is on the AP Profile. Value 2 indicates the client supports RRM portion and RRM Mode is not enabled on AP Profile. Value 3 indicates client doesnot support RRM
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.27
wsAuthenticatedClientRRMLocationReportSupportedIndicates if the client can support RRM location report requests.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.28
wsAuthenticatedClientRRMBeaconTableMeasurementSupportedIndicates if the client can detect APs via RRM beacon table reports.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.29
wsAuthenticatedClientRRMBeaconActiveMeasurementSupportedIndicates if the client supports active scan capability.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.30
wsAuthenticatedClientRRMBeaconPassiveMeasurementSupportedIndicates if the client supports passive scan capability.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.31
wsAuthenticatedClientRRMChannelLoadMeasurementSupportedIndicates if the client supports RRM channel load measurement.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.32
wsAuthenticatedClientDot11acCapableFlag indicating whether this client is capable of 802.11ac operation.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.1.1.33
wsAuthenticatedClientStatisticsTableThis table contains statistics available for each client associated to a WS managed AP.
SEQUENCE OF WsAuthenticatedClientStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.21.2
wsAuthenticatedClientStatisticsEntryEach entry in this table contain statistics available for each client associated a WS managed AP.
WsAuthenticatedClientStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.21.2.1
wsAuthenticatedClientPktsRecvdTotal packets received by a managed AP from the client station.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.1
wsAuthenticatedClientBytesRecvdTotal bytes received by a managed AP from the client station.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.2
wsAuthenticatedClientPktsTransmittedTotal packets transmitted by a managed AP to the client station.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.3
wsAuthenticatedClientBytesTransmittedTotal bytes transmitted by a managed AP to the client station.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.4
wsAuthenticatedClientDuplicatePktsRecvdTotal duplicate packets received from the client station.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.5
wsAuthenticatedClientFragmentedPktsRecvdTotal fragmented packets received from the client station.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.6
wsAuthenticatedClientFragmentedPktsTransmittedTotal fragmented packets transmitted to the client station.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.7
wsAuthenticatedClientTransmitRetryCountIndicates number of times transmits to client station succeeded after one or more retries.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.8
wsAuthenticatedClientTransmitRetryFailedCountNumber of times transmits to client station failed after one or more retries.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.9
wsAuthenticatedClientPktsRecvDroppedTotal packets dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.10
wsAuthenticatedClientBytesRecvDroppedTotal bytes dropped in the receive direction by a managed AP from the client station. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.11
wsAuthenticatedClientPktsTransmitDroppedTotal packets dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.12
wsAuthenticatedClientBytesTransmitDroppedTotal bytes dropped in the transmit direction by a managed AP to the client station. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.13
wsAuthenticatedClientTsViolatePktsRecvdNumber of packets received by the AP from a client station that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.14
wsAuthenticatedClientTsViolatePktsTransmittedNumber of packets transmitted by the AP to a client station that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.2.1.15
wsAuthenticatedClientNeighborManagedAPStatusTableThis table is maintained to lookup all WS managed APs detected, client can see in its RF area.
SEQUENCE OF WsAuthenticatedClientNeighborManagedAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.3
wsAuthenticatedClientNeighborManagedAPStatusEntryEach entry in this table contain WS managed APs that can be seen by client in its RF area.
WsAuthenticatedClientNeighborManagedAPStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.3.1
wsAuthenticatedClientStationMacAddressThe Ethernet address of a client station.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.3.1.1
wsAuthenticatedClientNeighborWSManagedAPMacAddressThe Ethernet address of a WS managed AP.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.3.1.2
wsAuthenticatedClientNeighborWSManagedAPRadioInterfaceThe radio interface of Managed AP.ro
Integer32
.1.3.6.1.4.1.207.8.42.8.34.21.3.1.3
wsAuthenticatedClientStationDiscoveryReasonIndicates the client status with respect to the Managed AP it is refering. One or more flags can be enabled at the same time.ro
Bits
.1.3.6.1.4.1.207.8.42.8.34.21.3.1.4
wsVAPAuthenticatedClientStatusTableThis table is maintained to lookup clients associated to a specific VAP on a WS managed AP.
SEQUENCE OF WsVAPAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.4
wsVAPAuthenticatedClientStatusEntryEach entry in this table contain clients associated to each VAP.
WsVAPAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.4.1
wsAuthenticatedVAPMacAddressThe Ethernet address assigned to a VAP to which the client is associated.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.4.1.1
wsVAPAuthenticatedClientMacAddressThe Ethernet address of associated client station.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.4.1.2
wsSSIDAuthenticatedClientStatusTableThis table is maintained to lookup all clients associated to a particular network.
SEQUENCE OF WsSSIDAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.5
wsSSIDAuthenticatedClientStatusEntryEach entry in this table contain clients associated to a particular network.
WsSSIDAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.5.1
wsAuthenticatedSSIDIndicates the network on which the client is connected.ro
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.5.1.1
wsSSIDAuthenticatedClientMacAddressThe Ethernet address of the client station.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.5.1.2
wsSwitchAuthenticatedClientStatusTableThis table is maintained to lookup clients associated to the APs managed by the specific controller.
SEQUENCE OF WsSwitchAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.6
wsSwitchAuthenticatedClientStatusEntryEach entry in this table contain client associated to each controller.
WsSwitchAuthenticatedClientStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.6.1
wsAuthenticatedClientSwitchIPAddressIP address of the WS associating the client.ro
IpAddress
.1.3.6.1.4.1.207.8.42.8.34.21.6.1.1
wsSwitchAuthenticatedClientMacAddressEthernet address of the associated client station.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.42.8.34.21.6.1.2
wsAuthenticatedClientQosStatusTableThis table contains client QoS status parameters of clients that are currently associated with managed APs. These objects represent the actual operational status values in effect for the clients.
SEQUENCE OF WsAuthenticatedClientQosStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.7
wsAuthenticatedClientQosStatusEntryEach entry in this table contains client QoS status parameters for a client associated with the WS managed AP.
WsAuthenticatedClientQosStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.7.1
wsAuthenticatedClientQosBandwidthLimitDownMaximum bandwidth rate allowed for the wireless down (outbound) direction from AP to client, thus controlling the maximum receive rate from the AP for this wireless client. This parameter is specified in bits-per-second (bps). The displayed value represents the actual bandwidth rate in use for the client, which may differ from the configured value since the AP rounds down to the nearest 64000 bps. A value of 0 indicates bandwidth limiting is disabled in this direction for the client.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.1
wsAuthenticatedClientQosBandwidthLimitUpMaximum bandwidth rate allowed for the wireless up (inbound) direction from client to AP, thus controlling the maximum send rate from this wireless client to the AP. This parameter is specified in bits-per-second (bps). The displayed value represents the actual bandwidth rate in use for the client, which may differ from the configured value since the AP rounds down to the nearest 64000 bps. A value of 0 indicates bandwidth limiting is disabled in this direction for the client.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.2
wsAuthenticatedClientQosAccessControlDownTypeAccess list type used for the wireless down (outbound) direction from the AP to this client. The wsAuthenticatedClientQosAccessControlDownName object identifies the access list.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.3
wsAuthenticatedClientQosAccessControlDownNameName of the access list in use in accordance with the wsAuthenticatedClientQosAccessControlDownType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.4
wsAuthenticatedClientQosAccessControlUpTypeAccess list type used for the wireless up (inbound) direction from this client to the AP. The wsAuthenticatedClientQosAccessControlUpName object identifies the access list.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.5
wsAuthenticatedClientQosAccessControlUpNameName of the access list in use in accordance with the wsAuthenticatedClientQosAccessControlUpType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.6
wsAuthenticatedClientQosDiffservPolicyDownTypeDiffServ policy type used for the wireless down (outbound) direction from the AP to this client. The wsAuthenticatedClientQosDiffservPolicyDownName object identifies the DiffServ policy.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.7
wsAuthenticatedClientQosDiffservPolicyDownNameName of the DiffServ policy in use in accordance with the wsAuthenticatedClientQosDiffservPolicyDownType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.8
wsAuthenticatedClientQosDiffservPolicyUpTypeDiffServ policy type used for the wireless up (inbound) direction from this client to the AP. The wsAuthenticatedClientQosDiffservPolicyUpName object identifies the DiffServ policy.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.9
wsAuthenticatedClientQosDiffservPolicyUpNameName of the DiffServ policy in use in accordance with the wsAuthenticatedClientQosDiffservPolicyUpType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.10
wsAuthenticatedClientQosOperStatusDesignates the AP quality-of-service operational status for this wireless client. This represents the combined states of the wsApClientQosMode object and the wsNetworkClientQosMode object for the wireless network to which this client is associated.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.7.1.11
wsAuthenticatedClientSessionStatisticsTableThis table contains statistics available for each client associated to a WS managed AP, but accumulated for the duration of the entire WLAN session, inclusive of client roaming.
SEQUENCE OF WsAuthenticatedClientSessionStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.21.8
wsAuthenticatedClientSessionStatisticsEntryEach entry in this table contain statistics available for each client associated a WS managed AP, but accumulated for the duration of the entire WLAN session, inclusive of client roaming.
WsAuthenticatedClientSessionStatisticsEntry
.1.3.6.1.4.1.207.8.42.8.34.21.8.1
wsAuthenticatedClientSessionPktsRecvdTotal packets received by managed APs from the client station throughout the duration of the current WLAN session.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.1
wsAuthenticatedClientSessionBytesRecvdTotal bytes received by managed APs from the client station throughout the duration of the current WLAN session.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.2
wsAuthenticatedClientSessionPktsTransmittedTotal packets transmitted by managed APs to the client station throughout the duration of the current WLAN session.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.3
wsAuthenticatedClientSessionBytesTransmittedTotal bytes transmitted by managed APs to the client station throughout the duration of the current WLAN session.ro
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.4
wsAuthenticatedClientSessionDuplicatePktsRecvdTotal duplicate packets received from the client station throughout the duration of the current WLAN session.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.5
wsAuthenticatedClientSessionFragmentedPktsRecvdTotal fragmented packets received from the client station. throughout the duration of the current WLAN session.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.6
wsAuthenticatedClientSessionFragmentedPktsTransmittedTotal fragmented packets transmitted to the client station throughout the duration of the current WLAN session.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.7
wsAuthenticatedClientSessionTransmitRetryCountIndicates number of times transmits to client station succeeded after one or more retries throughout the duration of the current WLAN session.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.8
wsAuthenticatedClientSessionTransmitRetryFailedCountNumber of times transmits to client station failed after one or more retries throughout the duration of the current WLAN session.ro
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.9
wsAuthenticatedClientSessionPktsRecvDroppedTotal packets dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.10
wsAuthenticatedClientSessionBytesRecvDroppedTotal bytes dropped in the receive direction by managed APs from the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless up (inbound) direction from client to AP.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.11
wsAuthenticatedClientSessionPktsTransmitDroppedTotal packets dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.12
wsAuthenticatedClientSessionBytesTransmitDroppedTotal bytes dropped in the transmit direction by managed APs to the client station throughout the duration of the current WLAN session. This is due to client QoS actions affecting the wireless down (outbound) direction from AP to client.
Counter64
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.13
wsAuthenticatedClientSessionTSViolatePktsRecvdNumber of packets received by managed APs from a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) uplink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.14
wsAuthenticatedClientSessionTSViolatePktsTransmittedNumber of packets transmitted by managed APs to a client station throughout the duration of the current WLAN session that are in excess of the client's alotted traffic stream (TS) downlink bandwidth, or are for an access category requiring admission control to which the client station has not been admitted.
Counter32
.1.3.6.1.4.1.207.8.42.8.34.21.8.1.15
wsAuthenticatedClientQosCachedStatusTableThis table contains cached client QoS status parameters of clients that are currently associated with managed APs. These objects represent values that were retrieved from a RADIUS server for this client. See the wsAuthenticatedClientQosStatusTable for the current set of operational values in use for this client.
SEQUENCE OF WsAuthenticatedClientQosCachedStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.9
wsAuthenticatedClientQosCachedStatusEntryEach entry in this table contains client QoS cached status parameters for a client associated with the WS managed AP. Only those parameters successfully retrieved from a RADIUS server via 802.1X authentication on behalf of a wireless client are displayed.
WsAuthenticatedClientQosCachedStatusEntry
.1.3.6.1.4.1.207.8.42.8.34.21.9.1
wsAuthenticatedClientQosCachedBandwidthLimitDownMaximum bandwidth rate allowed for the wireless down (outbound) direction from AP to client, thus controlling the maximum receive rate from the AP for this wireless client. This parameter is specified in bits-per-second (bps). A value of 0 indicates bandwidth limiting is disabled in this direction for the client.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.1
wsAuthenticatedClientQosCachedBandwidthLimitUpMaximum bandwidth rate allowed for the wireless up (inbound) direction from client to AP, thus controlling the maximum send rate from this wireless client to the AP. This parameter is specified in bits-per-second (bps). A value of 0 indicates bandwidth limiting is disabled in this direction for the client.
Unsigned32
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.2
wsAuthenticatedClientQosCachedAccessControlDownTypeAccess list type used for the wireless down (outbound) direction from the AP to this client. The wsAuthenticatedClientQosCachedAccessControlDownName object identifies the access list.ro
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.3
wsAuthenticatedClientQosCachedAccessControlDownNameName of the access list in use in accordance with the wsAuthenticatedClientQosCachedAccessControlDownType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.4
wsAuthenticatedClientQosCachedAccessControlUpTypeAccess list type used for the wireless up (inbound) direction from this client to the AP. The wsAuthenticatedClientQosCachedAccessControlUpName object identifies the access list.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.5
wsAuthenticatedClientQosCachedAccessControlUpNameName of the access list in use in accordance with the wsAuthenticatedClientQosCachedAccessControlUpType as follows: none(1) - This object is not displayed. ip(2) - This specifies an IP access list number in the range 1-199, or an IP access list name as defined by the aclName object in the aclTable in the FASTPATH-QOS-ACL-MIB. mac(3) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid MAC access list name, as defined by the aclMacName object in the FASTPATH-QOS-ACL-MIB. ipv6(4) - This is an alphanumeric string from 1-31 characters, beginning with a letter. This must be a valid IPV6 access list name, as defined by the aclIpv6Name object in the FASTPATH-QOS-ACL-MIB. Note that numbered IP access lists are displayed here using a character string notation instead of an integer.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.6
wsAuthenticatedClientQosCachedDiffservPolicyDownTypeDiffServ policy type used for the wireless down (outbound) direction from the AP to this client. The wsAuthenticatedClientQosCachedDiffservPolicyDownName object identifies the DiffServ policy.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.7
wsAuthenticatedClientQosCachedDiffservPolicyDownNameName of the DiffServ policy in use in accordance with the wsAuthenticatedClientQosCachedDiffservPolicyDownType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.8
wsAuthenticatedClientQosCachedDiffservPolicyUpTypeDiffServ policy type used for the wireless up (inbound) direction from this client to the AP. The wsAuthenticatedClientQosCachedDiffservPolicyUpName object identifies the DiffServ policy.
Enumeration
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.9
wsAuthenticatedClientQosCachedDiffservPolicyUpNameName of the DiffServ policy in use in accordance with the wsAuthenticatedClientQosCachedDiffservPolicyUpType as follows: none(1) - This object is not displayed. in(2) - This specifies a DiffServ policy name, as defined by the agentDiffServPolicyName object in the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Note that only DiffServ policy defintions of type 'in' are supported for wireless client QoS operation.
DisplayString
.1.3.6.1.4.1.207.8.42.8.34.21.9.1.10
AT-UWC-WLAN-SWITCH-MIB - SNMP MIB Reference | MIBs Explorer