AtiEdgeSwitch-MIB
AI MIB Summary
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Private MIB for ATI layer 2 stackable switches. This MIB can be used in Windows and UNIX environments.
Main OID:
alliedTelesis.1.3.6.1.4.1.207
920
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
920 total| Object Name |
|---|
alliedTelesisPrivate MIB for ATI layer 2 stackable switches. This MIB
can be used in Windows and UNIX environments. MODULE-IDENTITY .1.3.6.1.4.1.207 |
atiProduct OBJECT IDENTIFIER .1.3.6.1.4.1.207.1 |
swhub OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4 |
at-9000-28 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.148 |
at-9000-28SP OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.149 |
at-9000-28POE OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.150 |
at-9000-52 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.151 |
at-8100S-24 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.169 |
at-8100S-24C OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.170 |
at-8100S-24POE OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.171 |
at-8100S-48 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.172 |
at-8100S-48POE OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.173 |
at-8100S-16F8-SC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.174 |
at-8100S-24F-LC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.175 |
at-8100S-16F8-LC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.176 |
at-8100-8 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.177 |
at-8100-8POE OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.178 |
at-8100S-24F-SC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.206 |
at-9000-12POE OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.207 |
at-8100S-24DC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.208 |
at-FS970M-24C OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.233 |
at-FS970M-8 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.234 |
at-FS970M-8PS OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.235 |
at-FS970M-24PS OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.236 |
at-FS970M-48 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.237 |
at-FS970M-48PS OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.238 |
at-FS970M-16F8-LC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.239 |
at-FS970M-24LPS OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.240 |
at-FS970M-24F OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.241 |
at-FS970M-16F8-SC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.242 |
routerSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.14 |
at-9924T-EMC OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.14.53 |
mibObject OBJECT IDENTIFIER .1.3.6.1.4.1.207.8 |
atiStkSwMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17 |
atiStkSwSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.1 |
atiStkSwSysConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.1.1 |
atiStkSwSysResetSetting this object to 'reset' will cause the switch to
perform a soft reboot. Setting this object to 'no-reset' will
have no effect.rw Enumeration .1.3.6.1.4.1.207.8.17.1.1.1 |
atiStkSwSysIpAddressThe IP address of the switch.ro IpAddress .1.3.6.1.4.1.207.8.17.1.1.2 |
atiStkSwSysSubnetMaskThe subnet mask of the switch.ro IpAddress .1.3.6.1.4.1.207.8.17.1.1.3 |
atiStkSwSysGatewayThe IP address of the gateway for the switch.rw IpAddress .1.3.6.1.4.1.207.8.17.1.1.4 |
atiStkSwSysIpAddressStatusThis object specifies how the IP address, subnet mask and the
gateway address currently in use on the switch was
obtained/configured.ro Enumeration .1.3.6.1.4.1.207.8.17.1.1.5 |
atiStkSwSysDnsServerThis object specifies the IP address of the DNS server for
the switch.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches.ro IpAddress .1.3.6.1.4.1.207.8.17.1.1.6 |
atiStkSwSysDefaultDomainNameThis object specifies the default domain name for the switch.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.1.1.7 |
atiStkSwSysNumberOfModulesThis object gives a count of the number of modules present
in the stackable switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.1.8 |
atiStkSwSysSpanningTreeStatusSetting this object to 'enable' will enable spanning tree
protocol on the switch. Setting this object to 'disable'
will disable spanning tree protocol on the switch.
Select the spanning tree protocol version using the object
'atiStkSwSysSpanningTreeVersion'.rw Enumeration .1.3.6.1.4.1.207.8.17.1.1.9 |
atiStkSwSysSpanningTreeVersionThe object can be used to select the version of spanning tree
protocol running on the switch.rw Enumeration .1.3.6.1.4.1.207.8.17.1.1.10 |
atiStkSwSysActionThis object specifies the following actions that apply to the switch:
saveConfig - Save the current switch configuration.
reset - Reboot the switch.
defaultConfig - Restore default switch configuration.
The switch is automatically rebooted after this operation.
Note that this object returns a zero value when doing a Get operation.ro Enumeration .1.3.6.1.4.1.207.8.17.1.1.11 |
atiStkSwSysNumOfModuleInStackThis object specifies the number of stacking modules in the stack.ro Integer32 .1.3.6.1.4.1.207.8.17.1.1.12 |
atiStkSwSysNwMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.1.2 |
atiStkSwSysTrapRecv1This object specifies the IP address of the management
station #1 to which traps are sent by the switch.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches.rwobsolete IpAddress .1.3.6.1.4.1.207.8.17.1.2.1 |
atiStkSwSysTrapRecv2This object specifies the IP address of the management
station #2 to which traps are sent by the switch.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches.rwobsolete IpAddress .1.3.6.1.4.1.207.8.17.1.2.2 |
atiStkSwSysTrapRecv3This object specifies the IP address of the management
station #3 to which traps are sent by the switch.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches.rwobsolete IpAddress .1.3.6.1.4.1.207.8.17.1.2.3 |
atiStkSwSysTrapRecv4This object specifies the IP address of the management
station #4 to which traps are sent by the switch.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches.rwobsolete IpAddress .1.3.6.1.4.1.207.8.17.1.2.4 |
atiStkSwSysSystemTimeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.1.5 |
atiStkSwSysCurrentTimeThis object specify the current time of the system. The user
can change the time by providing the string format as an input,
e.g. HH:MM:SS.rw DisplayString .1.3.6.1.4.1.207.8.17.1.5.1 |
atiStkSwSysCurrentDateThis object specify the current time of the system. The user
can change the date by providing the string format as an input,
e.g. DD-MM-YYYY.rw DisplayString .1.3.6.1.4.1.207.8.17.1.5.2 |
atiStkSwSysSNTPStatusEnable/disable the SNTP status.rw Enumeration .1.3.6.1.4.1.207.8.17.1.5.3 |
atiStkSwSysSNTPServerIPAddressThe ipaddress of the SNTP Server.rw IpAddress .1.3.6.1.4.1.207.8.17.1.5.4 |
atiStkSwSysSNTPUTCOffsetSet the UTC Offset value within the range from -12 to 12 in hours.rw Integer32 (-12..12) .1.3.6.1.4.1.207.8.17.1.5.5 |
atiStkSwSysSNTPDSTStatusEnable/disble the Daylight Saving Time.rw Enumeration .1.3.6.1.4.1.207.8.17.1.5.6 |
atiStkSwSysSNTPPollingIntervalSetting the interval for polling the SNTP Server. The polling
time range is between 60 and 1200 in seconds.ro Integer32 .1.3.6.1.4.1.207.8.17.1.5.7 |
atiStkSwSysSNTPLastDeltaDisplay the last adjustment to system done in seconds.ro Integer32 .1.3.6.1.4.1.207.8.17.1.5.8 |
atiStkSwSysInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.1.6 |
atiStkSwTemperatureInfoTableThis table contains a list of system temperature information present in the switch
stack including voltage and temperature. SEQUENCE OF AtiStkSwTemperatureInfoEntry .1.3.6.1.4.1.207.8.17.1.6.1 |
atiStkSwTemperatureInfoEntryThis object specifies an entry in 'atiStkSwTemperatureInfoTable'
that describes the hardware informaton for a module present in
the switch stack. AtiStkSwTemperatureInfoEntry .1.3.6.1.4.1.207.8.17.1.6.1.1 |
atiStkSwTemperatureInfoModuleIdThe module Id of a switch, it also used as an index of the table.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.1.1.1 |
atiStkSwTemperatureInfoTemperatureThe temperature of the device in Celcius.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.1.1.2 |
atiStkSwTemperatureInfoStateThe state of the temperature state, either normal or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.1.1.3 |
atiStkSwFanInfoTableThis table contains information for all the fans present
in the switch. SEQUENCE OF AtiStkSwFanInfoEntry .1.3.6.1.4.1.207.8.17.1.6.2 |
atiStkSwFanInfoEntryThis object specifies an entry in 'atiStkSwFanInfoTable'
that describes the informaton for a specific fan in
the switch. AtiStkSwFanInfoEntry .1.3.6.1.4.1.207.8.17.1.6.2.1 |
atiStkSwFanInfoModuleIdThe module Id of the switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.2.1.1 |
atiStkSwFanInfoFan1IdThe fan Id1 of the switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.2.1.2 |
atiStkSwFan1InfoStateThe state of the fan1 running, either normal or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.2.1.3 |
atiStkSwFan1InfoSpeedThe current speed of fan1.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.2.1.4 |
atiStkSwFanInfoFan2IdThe fan2 Id of the switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.2.1.5 |
atiStkSwFan2InfoStateThe state of the fan2 running, either normal or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.2.1.6 |
atiStkSwFan2InfoSpeedThe current speed of fan2.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.2.1.7 |
atiStkSwPSUInfoTableThis table contains information for all the power supply units present
in the switch. SEQUENCE OF AtiStkSwPSUInfoEntry .1.3.6.1.4.1.207.8.17.1.6.4 |
atiStkSwPSUInfoEntryThis object specifies an entry in 'atiStkSwPSUInfoTable'
that describes the informaton for a specific PSU in
the switch. AtiStkSwPSUInfoEntry .1.3.6.1.4.1.207.8.17.1.6.4.1 |
atiStkSwPSUInfoModuleIdThe module Id of the switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.4.1.1 |
atiStkSwPSUInfoPSU1IdThe PSU1 Id of the switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.4.1.2 |
atiStkSwPSU1InfoStateThe state of the PSU1, either normal or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.4.1.3 |
atiStkSwPSU1InfoStatusThe status of the PSU1, either on or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.4.1.4 |
atiStkSwPSUInfoPSU2IdThe PSU2 Id of the switch.ro Integer32 .1.3.6.1.4.1.207.8.17.1.6.4.1.5 |
atiStkSwPSU2InfoStateThe state of the PSU2, either normal or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.4.1.6 |
atiStkSwPSU2InfoStatusThe status of the PSU2, either on or off.ro DisplayString .1.3.6.1.4.1.207.8.17.1.6.4.1.7 |
atiStkSwSysMgmtACLGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.1.7 |
atiStkSwSysMgmtACLStatusEnable/Disable management ACL feature.rw Enumeration .1.3.6.1.4.1.207.8.17.1.7.1 |
atiStkSwSysMgmtACLConfigTableThis table contains a list of MgmtACLs present in the switch
stack and their associated hardware information. SEQUENCE OF AtiStkSwSysMgmtACLConfigEntry .1.3.6.1.4.1.207.8.17.1.7.2 |
atiStkSwSysMgmtACLConfigEntryThis object specifies an entry in 'atiStkSwSysMgmtACLConfigTable'
that allow the user controls which management stations can remotely
manage the device using the Telnet application protocol or a web
browser. AtiStkSwSysMgmtACLConfigEntry .1.3.6.1.4.1.207.8.17.1.7.2.1 |
atiStkSwSysMgmtACLConfigModuleIdThe ID of this module.ro Integer32 .1.3.6.1.4.1.207.8.17.1.7.2.1.1 |
atiStkSwSysMgmtACLConfigIdThe ID of the Management ACL Table for this module.ro Integer32 .1.3.6.1.4.1.207.8.17.1.7.2.1.2 |
atiStkSwSysMgmtACLConfigIpAddrThe IP Address of the specific management station.rw IpAddress .1.3.6.1.4.1.207.8.17.1.7.2.1.3 |
atiStkSwSysMgmtACLConfigMaskThe subnet mask of the IP Address.rw IpAddress .1.3.6.1.4.1.207.8.17.1.7.2.1.4 |
atiStkSwSysMgmtACLConfigApplicationThis object specify which interface the user want the management
station to be able to use when managing the switch. The options are :
telnet, web, ping, all. Note that the enum value correspond to the
bit position of the mask.rw Bits .1.3.6.1.4.1.207.8.17.1.7.2.1.5 |
atiStkSwSysMgmtACLConfigRowStatusThe Row Status of the Mgmt ACL table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.1.7.2.1.6 |
atiStkSwPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.2 |
atiStkSwPortConfigTableThis table contains a list of physical ports present in the
switch and their associated attributes. SEQUENCE OF AtiStkSwPortConfigEntry .1.3.6.1.4.1.207.8.17.2.1 |
atiStkSwPortConfigEntryThis object specifies an entry in 'atiStkSwPortConfigTable'
that describes the attributes associated with a physical port
present in the switch. AtiStkSwPortConfigEntry .1.3.6.1.4.1.207.8.17.2.1.1 |
atiStkSwModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 .1.3.6.1.4.1.207.8.17.2.1.1.1 |
atiStkSwPortIdThis object specifies the ID of a port present on a given
module.ro Integer32 .1.3.6.1.4.1.207.8.17.2.1.1.2 |
atiStkSwPortNameThe user-defined ASCII name of the port.rw DisplayString .1.3.6.1.4.1.207.8.17.2.1.1.3 |
atiStkSwPortStateThis object allows the user to either enabled or disabled.
This object can be read to obtain the current state of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.4 |
atiStkSwPortLinkStateThis object specifies the link state on this port.ro Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.5 |
atiStkSwPortNegotiationThis object allows an admin request to configure the port
to either autosense or one of the different speed-duplex
combinations.rw Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.6 |
atiStkSwPortSpeedThis object specifies the current speed of the port.ro Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.7 |
atiStkSwPortDuplexStatusThis object specifies the current duplex type used by the
port.ro Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.8 |
atiStkSwPortFlowControlThis object is used to enable/disable flow control on the
port. When enabled, flow control will be full duplex.
Flow control is disabled by default.rw Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.9 |
atiStkSwPortBackPressureThis object is used to enable/disable Back Pressure on the
port.
Back Pressure is disabled by default.rw Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.10 |
atiStkSwPortPriorityThis object specifies whether packets flowing through this
port use the associated VLAN priority or override the
associated VLAN priority with either a high or a low priority.
This MIB is not applicable to the 85xx and 94xx family of ATI
switches. Note: These switch families support CoS/QoS.rw Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.11 |
atiStkSwPortBroadcastProcessingThis object specifies whether the received broadcast packets
should be processed or discarded.
Broadcast packets are processed by default.ro Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.12 |
atiStkSwPortMDIOThis object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix.rw Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.13 |
atiStkSwPortHOLLimitThis object allows user to set the head of line blocking limit.
Note (94xx): Range upto 8191 is supported for Gigabit Ports.rw Integer32 .1.3.6.1.4.1.207.8.17.2.1.1.14 |
atiStkSwPortBackPressureLimitThis object is used to set the MDIO of this port for required
cable connection type. For straight-through cable set to mdi
and for cross-over cable set to mdix. This limit can be used
for both BackPressure and FlowControl Limits.
Note: The range of 1 to 7935 is supported on the 94xx family.rw Integer32 .1.3.6.1.4.1.207.8.17.2.1.1.15 |
atiStkSwPortSTPStateThis object specifies the spanning tree state on this port.
This object is not applicable to 8300 series products. This
object is not valid on the 9400 series of boxes.ro Enumeration .1.3.6.1.4.1.207.8.17.2.1.1.16 |
atiStkSwPortMirroringConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.2.2 |
atiStkSwPortMirroringStateThis object specifies whether port mirroring is l2-enabled,
or disabled on the switch.
Note that, when enabled, both transmit and receive packets will
be mirrored.rw Enumeration .1.3.6.1.4.1.207.8.17.2.2.1 |
atiStkSwPortMirroringDestinationModuleIdThis object specifies the module ID of the destination port
that mirrors the source port (specified by
'atiStkSwPortMirroringSourceModuleId' and
'atiStkSwPortMirroringSourcePortId'). All packets
transmitted and received on the source port will be mirrored
onto the destination port.
This object will have a value of 0 when port mirroring is
disabled. This object will have a default value of 1 (the
master module ID) when mirroring is enabled.
This is not available on the 85xx and 94xx series of switchesrw Integer32 .1.3.6.1.4.1.207.8.17.2.2.4 |
atiStkSwPortMirroringDestinationPortIdThis object specifies the port ID (on the module
specified by 'atiStkSwPortMirroringDestinationModuleId') of
the destination port that mirrors the source port (specified
by 'atiStkSwPortMirroringSourceModuleId' and
'atiStkSwPortMirroringSourcePortId'). All packets transmitted
and received on the source port will be mirrored onto the
destination port.
This object will have a value of 0 when port mirroring is
disabled. When mirroring is enabled, set this object to a
non-zero value to activate mirroring.rw Integer32 .1.3.6.1.4.1.207.8.17.2.2.5 |
atiStkSwPortMirroringSourceRxListThis object specifies a list of ports that are mirrored for ingress traffic.
All packets received on these ports will be mirrored onto the
mirror port (atiStkSwPortMirroringDestinationPortId).
It is in the format of a list of <PortNumber>
separated by comma. For example, '1, 4-7' represents the
port number 1 ports
from number 4 to 7.
This object is not applicable to 8300 series products.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.2.2.6 |
atiStkSwPortMirroringSourceTxListThis object specifies a list of ports that are mirrored for egress traffic.
All packets transmitted from these ports will be mirrored onto the
mirror port (atiStkSwPortMirroringDestinationPortId).
It is in the format of a list of <PortNumber>
separated by comma. For example, '1, 4-7' represents the
port number 1 ports
from number 4 to 7.
This object is not applicable to 8300 series products.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.2.2.7 |
atiStkPortSecurityConfigTableThis table contains the port security attributes of a list of
physical ports present in the switch.
This table object is not applicable to 8300 series products. SEQUENCE OF AtiStkPortSecurityConfigEntry .1.3.6.1.4.1.207.8.17.2.5 |
atiStkPortSecurityConfigEntryThis object specifies an entry in
'atiStkPortSecurityConfigTable' that describes the port
security attributes associated with a physical port present in
the switch. AtiStkPortSecurityConfigEntry .1.3.6.1.4.1.207.8.17.2.5.1 |
atiStkPortSecurityThresholdThis object specifies the security threshold on this port. It
is applicable only if the port security mode (specified by
'portSecurityMode') is set to 'limited(2)' mode.rw Integer32 .1.3.6.1.4.1.207.8.17.2.5.1.2 |
atiStkPortIntrusionActionThis object specifies the security action that should be
taken when an intrusion is detected.
By default, port intrusion action is set to 'discard' mode.rw Enumeration .1.3.6.1.4.1.207.8.17.2.5.1.3 |
atiStkPortSecurityAgingThis object enables or disables the security aging
by the 'portSecurityAging'.
By default, port intrusion action is disabled.rw Enumeration .1.3.6.1.4.1.207.8.17.2.5.1.4 |
atiStkPortIntrusionActionStatusThis object enables or disables the security action specified
by the 'portIntrusionAction'.
By default, port intrusion action is disabled.rw Enumeration .1.3.6.1.4.1.207.8.17.2.5.1.5 |
atiStkPortDhcpIpConfigTableThis table contains the port DHCP IP assignments list of
physical ports present in the switch. SEQUENCE OF AtiStkPortDhcpIpConfigEntry .1.3.6.1.4.1.207.8.17.2.6 |
atiStkPortDhcpIpConfigEntryThis object specifies an entry in
'atiStkPortDhcpIpConfigTable' that describes the port
DHCP IP assignments associated with a physical port present in
the switch. AtiStkPortDhcpIpConfigEntry .1.3.6.1.4.1.207.8.17.2.6.1 |
atiStkPortDhcpIpOfferThis object specifies the DHCP IP Offer on this port.ro DisplayString .1.3.6.1.4.1.207.8.17.2.6.1.1 |
atiStkPortDhcpIpAddThis object specifies the DHCP IP added on this port.rw IpAddress .1.3.6.1.4.1.207.8.17.2.6.1.2 |
atiStkPortDhcpIpDeleteThis object specifies the DHCP IP deleted on this port.rw IpAddress .1.3.6.1.4.1.207.8.17.2.6.1.3 |
atiStkSwIntrusionAttackTableThis object specifies an entry in 'atiStkSwIntrusionAttackTable'
that describes the intruder attack associated with a physical port
present in the switch. SEQUENCE OF AtiStkSwIntrusionAttackEntry .1.3.6.1.4.1.207.8.17.2.7 |
atiStkSwIntrusionAttackEntryThis object specifies an entry in 'atiStkSwIntrusionAttackTable'
that describes the intruder attack associated with a physical port
present in the switch. AtiStkSwIntrusionAttackEntry .1.3.6.1.4.1.207.8.17.2.7.1 |
atiStkSwIntruderAttackVlanIdThis object identifies the intruding VlanId on the port for
this module.ro Integer32 .1.3.6.1.4.1.207.8.17.2.7.1.1 |
atiStkSwIntruderAttackMacAddrThis object identifies the intruding MAC address on the port for
this module.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.2.7.1.2 |
atiStkSwPortLoopProtectConfigTableThis table contains the current loop detection information of a list
of physical ports present in the switch. SEQUENCE OF AtiStkSwPortLoopProtectConfigEntry .1.3.6.1.4.1.207.8.17.2.8 |
atiStkSwPortLoopProtectConfigEntryThis object specifies an entry in
'atiStkSwPortLoopProtectConfigTable' that describe the current
Loop Detection information with a physical port present in the
switch. AtiStkSwPortLoopProtectConfigEntry .1.3.6.1.4.1.207.8.17.2.8.1 |
atiStkSwPortLoopProtectConfigStatusThis object specifies the current loop status of Loop Protection.ro Enumeration .1.3.6.1.4.1.207.8.17.2.8.1.1 |
atiStkSwPortLoopProtectConfigActionThis object specifies the current loop action by Loop Detected.ro Enumeration .1.3.6.1.4.1.207.8.17.2.8.1.2 |
atiStkSwPortLoopProtectConfigExpiryThis object specifies the remaining time(sec) to back to normal status
from blocking status. A value of -1 indicates that Blocktimeout has
been set 'None' or Loop Protection is 'Normal' status.ro Integer32 .1.3.6.1.4.1.207.8.17.2.8.1.3 |
atiStkSwRxLDFModuleIdThe Module ID where the loop detection frame is received on.ro Integer32 .1.3.6.1.4.1.207.8.17.2.8.1.4 |
atiStkSwRxLDFPortIdThe Port ID where the loop detection frame is received on.ro Integer32 .1.3.6.1.4.1.207.8.17.2.8.1.5 |
atiStkSwRxLDFVlanIdThe Vlan ID where the loop detection frame is received on.ro Integer32 .1.3.6.1.4.1.207.8.17.2.8.1.6 |
atiStkSwVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.3 |
atiStkSwVlanConfigTableThis table contains a list of VLANs configured on the switch. SEQUENCE OF AtiStkSwVlanConfigEntry .1.3.6.1.4.1.207.8.17.3.1 |
atiStkSwVlanConfigEntryThis object specifies an entry in 'atiStkSwVlanConfigTable'
that describes a VLAN configured on the switch. AtiStkSwVlanConfigEntry .1.3.6.1.4.1.207.8.17.3.1.1 |
atiStkSwVlanIdThe VLAN ID of this VLAN as stored in the tag information
header in accordance with the 802.1q specifications.ro Integer32 .1.3.6.1.4.1.207.8.17.3.1.1.1 |
atiStkSwVlanNameThe name of the VLAN.rw DisplayString .1.3.6.1.4.1.207.8.17.3.1.1.2 |
ipAddressThe ip address of the VLAN.rw DisplayString .1.3.6.1.4.1.207.8.17.3.1.1.3 |
atiStkSwVlanVlanTypeThis object specifies the type of the Vlan.ro Enumeration .1.3.6.1.4.1.207.8.17.3.1.1.4 |
atiStkSwVlanTaggedPortListThis object specifies a list of tagged ports (on module #1)
that participate in this VLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.3.1.1.5 |
atiStkSwVlanUntaggedPortListThis object specifies a list of untagged ports (on module #1)
that participate in this VLAN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.3.1.1.6 |
atiStkSwVlanConfigEntryStatusThe current status of this VLAN entry.rw Enumeration .1.3.6.1.4.1.207.8.17.3.1.1.7 |
atiStkSwPort2VlanTableThis tables contains a list of ports in the switch and their
associated VLAN configuration information. SEQUENCE OF AtiStkSwPort2VlanEntry .1.3.6.1.4.1.207.8.17.3.2 |
atiStkSwPort2VlanEntryThis object specifies an entry in 'atiStkSwPort2VlanTable'
that describes the VLAN information associated with a given
module/port. AtiStkSwPort2VlanEntry .1.3.6.1.4.1.207.8.17.3.2.1 |
atiStkSwPortIndexThe Index of the VLAN to which this port belongs.ro Integer32 .1.3.6.1.4.1.207.8.17.3.2.1.1 |
atiStkSwPortPortIdThe ID of the VLAN to which this port belongs.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.3.2.1.2 |
atiStkSwPortVlanIdThe ID of the VLAN to which this port belongs.ro Integer32 .1.3.6.1.4.1.207.8.17.3.2.1.3 |
atiStkSwPortVlanNameThe name of the VLAN to which this port belongs.ro DisplayString .1.3.6.1.4.1.207.8.17.3.2.1.4 |
atiStkSwMacAddr2VlanTableThis table contains a list of MAC addresses (in the
forwarding table of the switch) and the associated VLAN to
which each MAC address belongs. SEQUENCE OF AtiStkSwMacAddr2VlanEntry .1.3.6.1.4.1.207.8.17.3.3 |
atiStkSwMacAddr2VlanEntryThis object specifies an entry in 'atiStkSwMacAddr2VlanTable'
that associates a MAC address (in the forwarding table of the
switch) with the VLAN to which the address belongs. AtiStkSwMacAddr2VlanEntry .1.3.6.1.4.1.207.8.17.3.3.1 |
atiStkSwMacEntryAll entries present in the table.ro Integer32 .1.3.6.1.4.1.207.8.17.3.3.1.1 |
atiStkSwMacAddressA MAC address from the forwarding table of the switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.3.3.1.2 |
atiStkSwMacAddrVlanIdThe ID of the VLAN to which this MAC address belongs.ro Integer32 .1.3.6.1.4.1.207.8.17.3.3.1.3 |
atiStkSwMacAddrVlanNameThe name of the VLAN to which this MAC address belongs.ro DisplayString .1.3.6.1.4.1.207.8.17.3.3.1.4 |
atiStkSwMacAddrPortListThe port List (on the module specified by
'atiStkSwMacAddrModuleId') on which this MAC address entry
exists. This is shown as U: Untagged Ports T: Tagged Ports.ro DisplayString .1.3.6.1.4.1.207.8.17.3.3.1.7 |
atiStkSwGVRPConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.3.6 |
atiStkSwGVRPStatusEnabled/Disabled GVRP on a switch basis.rw Enumeration .1.3.6.1.4.1.207.8.17.3.6.1 |
atiStkSwGVRPGIPStatusEnabled/Disabled GARP Information Propagation (GIP) on a switch basis.rw Enumeration .1.3.6.1.4.1.207.8.17.3.6.2 |
atiStkSwGVRPJoinTimerSpecifies the Join Timer in centi seconds, (1/100th of seconds), The default
is 20 centi seconds.rw Integer32 .1.3.6.1.4.1.207.8.17.3.6.3 |
atiStkSwGVRPLeaveTimerSpecifies the Leave Timer in centi seconds, (1/100th of seconds), The default
is 60 centi seconds.rw Integer32 .1.3.6.1.4.1.207.8.17.3.6.4 |
atiStkSwGVRPLeaveAllTimerSpecifies the Leave All Timer in centi seconds, (1/100th of seconds), The
default is 1000 centi seconds.rw Integer32 .1.3.6.1.4.1.207.8.17.3.6.5 |
atiStkSwGVRPPortConfigTableThis table is configuring the GVRP Vlan base on each port. SEQUENCE OF AtiStkSwGVRPPortConfigEntry .1.3.6.1.4.1.207.8.17.3.7 |
atiStkSwGVRPPortConfigEntryThis object specifies an entry in 'atiStkSwGVRPPortConfigTable'. AtiStkSwGVRPPortConfigEntry .1.3.6.1.4.1.207.8.17.3.7.1 |
atiStkSwGVRPPortConfigModuleIdAn ID that indicate which module it refer to for stacking.ro Integer32 .1.3.6.1.4.1.207.8.17.3.7.1.1 |
atiStkSwGVRPPortConfigPortIdPort Index.ro Integer32 .1.3.6.1.4.1.207.8.17.3.7.1.2 |
atiStkSwGVRPPortConfigStatusPort Status for GVRP Vlan either Normal or Mode can be set.rw Enumeration .1.3.6.1.4.1.207.8.17.3.7.1.3 |
atiStkSwGVRPCountersTableThis table is configuring the GVRP Vlan base on each port. SEQUENCE OF AtiStkSwGVRPCountersEntry .1.3.6.1.4.1.207.8.17.3.8 |
atiStkSwGVRPCountersEntryThis object specifies an entry in 'atiStkSwGVRPCountersTable'. AtiStkSwGVRPCountersEntry .1.3.6.1.4.1.207.8.17.3.8.1 |
atiStkSwGVRPCountersModuleIdAn ID that indicate which module it refer to for stacking.ro Integer32 .1.3.6.1.4.1.207.8.17.3.8.1.1 |
atiStkSwGVRPCountersGARPRxPktro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.2 |
atiStkSwGVRPCountersInvalidGARPRxPktro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.3 |
atiStkSwGVRPCountersGARPTxPktro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.4 |
atiStkSwGVRPCountersGARPTxDisabledro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.5 |
atiStkSwGVRPCountersPortNotSendingro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.6 |
atiStkSwGVRPCountersGARPDisabledro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.7 |
atiStkSwGVRPCountersPortNotListeningro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.8 |
atiStkSwGVRPCountersInvalidPortro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.9 |
atiStkSwGVRPCountersInvalidProtocolro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.10 |
atiStkSwGVRPCountersInvalidFormatro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.11 |
atiStkSwGVRPCountersDatabaseFullro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.12 |
atiStkSwGVRPCountersRxMsgLeaveAllro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.13 |
atiStkSwGVRPCountersRxMsgJoinEmptyro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.14 |
atiStkSwGVRPCountersRxMsgJoinInro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.15 |
atiStkSwGVRPCountersRxMsgLeaveEmptyro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.16 |
atiStkSwGVRPCountersRxMsgLeaveInro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.17 |
atiStkSwGVRPCountersRxMsgEmptyro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.18 |
atiStkSwGVRPCountersRxMsgBadMsgro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.19 |
atiStkSwGVRPCountersRxMsgBadAttributero Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.20 |
atiStkSwGVRPCountersTxMsgLeaveAllro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.21 |
atiStkSwGVRPCountersTxMsgJoinEmptyro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.22 |
atiStkSwGVRPCountersTxMsgJoinInro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.23 |
atiStkSwGVRPCountersTxMsgLeaveEmptyro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.24 |
atiStkSwGVRPCountersTxMsgLeaveInro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.25 |
atiStkSwGVRPCountersTxMsgEmptyro Counter32 .1.3.6.1.4.1.207.8.17.3.8.1.26 |
atiStkSwMacAddrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.4 |
atiStkSwStaticMacAddrTableThis table contains a list of static MAC address configured
on the switch. SEQUENCE OF AtiStkSwStaticMacAddrEntry .1.3.6.1.4.1.207.8.17.4.1 |
atiStkSwStaticMacAddrEntryThis object is an entry in 'atiStkSwStaticMacAddrTable' that
describes a static MAC address configured on a given module
and port. AtiStkSwStaticMacAddrEntry .1.3.6.1.4.1.207.8.17.4.1.1 |
atiStkSwStaticEntryThe Table Entry number in static MAC address entry table.ro Integer32 .1.3.6.1.4.1.207.8.17.4.1.1.1 |
atiStkSwStaticMacAddressThis object identifies the static MAC address of this entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.4.1.1.2 |
atiStkSwStaticMacAddrVlanIdThe ID of the VLAN on which this static MAC address entry is
configured.ro Integer32 .1.3.6.1.4.1.207.8.17.4.1.1.3 |
atiStkSwStaticMacAddrModuleIdThe module ID on which this static MAC address entry is
configured.ro Integer32 .1.3.6.1.4.1.207.8.17.4.1.1.4 |
atiStkSwStaticMacAddrPortIdThe port ID (on the module specified by
'atiStkSwStaticMacAddrModuleId') on which this static MAC
address entry is configured.
Note: a) When defining a list this value must be 0.
b) This is on track to be deprecated approx. Dec'2004.ro DisplayString .1.3.6.1.4.1.207.8.17.4.1.1.5 |
atiStkSwStaticMacAddrDstMacStateThe current status of this static MAC address entry.ro Enumeration .1.3.6.1.4.1.207.8.17.4.1.1.6 |
atiStkSwStaticMacAddrEntryStatusThe current status of this static MAC address entry.ro Enumeration .1.3.6.1.4.1.207.8.17.4.1.1.7 |
atiStkSwEthStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.5 |
atiStkSwEthModuleMonTableThis table contains a list of modules and their associated
ethernet statistics (measured on the module as a whole). SEQUENCE OF AtiStkSwEthModuleMonEntry .1.3.6.1.4.1.207.8.17.5.1 |
atiStkSwEthModuleMonEntryThis object specifies an entry in 'atiStkSwEthModuleMonTable'
that describes the ethernet statistics measured on a given
module as a whole. AtiStkSwEthModuleMonEntry .1.3.6.1.4.1.207.8.17.5.1.1 |
atiStkSwEthModuleMonIdIndex into atiStkSwEthModuleMonTable.ro Integer32 .1.3.6.1.4.1.207.8.17.5.1.1.1 |
atiStkSwEthModuleMonTxGoodFramesThe total number of good frames transmitted by this module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.1.1.2 |
atiStkSwEthModuleMonRxGoodFramesThe total number of good frames received by this module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.1.1.3 |
atiStkSwEthModuleMonTxTotalBytesThe total number of bytes transmitted by this module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.1.1.4 |
atiStkSwEthModuleMonTxBroadcastFramesThe total number of broadcast frames transmitted from this
module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.1.1.5 |
atiStkSwEthModuleMonTxMulticastFramesThe total number of multicast frames transmitted from this
module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.1.1.6 |
atiStkSwEthModuleMonRxOverrunFramesThe total number of oversized frames received on this module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.1.1.7 |
atiStkSwEthModuleErrTableThis table contains a list of modules and their associated
ethernet error statistics (measured on the module as a whole). SEQUENCE OF AtiStkSwEthModuleErrEntry .1.3.6.1.4.1.207.8.17.5.2 |
atiStkSwEthModuleErrEntryThis object specifies an entry in 'atiStkSwEthModuleErrTable'
that describes the ethernet error statistics measured on a
given module as a whole. AtiStkSwEthModuleErrEntry .1.3.6.1.4.1.207.8.17.5.2.1 |
atiStkSwEthModuleErrIdIndex into atiStkSwEthModuleErrTable.ro Integer32 .1.3.6.1.4.1.207.8.17.5.2.1.1 |
atiStkSwEthModuleErrRxCRCThe total number of CRC errors on packets received on this
module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.2.1.2 |
atiStkSwEthModuleErrRxBadFramesThe total number of bad frames received on this module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.2.1.3 |
atiStkSwEthModuleErrCollisionsThe number of times a collision was detected on this module.ro Counter64 .1.3.6.1.4.1.207.8.17.5.2.1.4 |
atiStkSwEthPortMonTableThis table contains a list of ports and their associated
ethernet statistics. SEQUENCE OF AtiStkSwEthPortMonEntry .1.3.6.1.4.1.207.8.17.5.3 |
atiStkSwEthPortMonEntryThis object specifies an entry in 'atiStkSwEthPortMonTable'
that describes the ethernet statistics measured on a given
module/port. AtiStkSwEthPortMonEntry .1.3.6.1.4.1.207.8.17.5.3.1 |
atiStkSwEthPortMonIdIndex into atiStkSwEthPortMonTable.ro Integer32 .1.3.6.1.4.1.207.8.17.5.3.1.1 |
atiStkSwEthPortMonTxGoodFramesThe total number of good frames transmitted by this port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.3.1.2 |
atiStkSwEthPortMonRxGoodFramesThe total number of good frames received by this port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.3.1.3 |
atiStkSwEthPortMonTxTotalBytesThe total number of bytes transmitted by this port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.3.1.4 |
atiStkSwEthPortMonTxBroadcastFramesThe total number of broadcast frames transmitted from this
port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.3.1.5 |
atiStkSwEthPortMonTxMulticastFramesThe total number of broadcast frames transmitted from this
port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.3.1.6 |
atiStkSwEthPortMonRxOverrunFramesThe total number of oversized frames received on this port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.3.1.7 |
atiStkSwEthPortErrTableThis table contains a list of ports and their associated
ethernet error statistics. SEQUENCE OF AtiStkSwEthPortErrEntry .1.3.6.1.4.1.207.8.17.5.4 |
atiStkSwEthPortErrEntryThis object specifies an entry in atiStkSwEthPortErrTable
that describes the ethernet error statistics measured on a
given module/port. AtiStkSwEthPortErrEntry .1.3.6.1.4.1.207.8.17.5.4.1 |
atiStkSwEthPortErrIdIndex into atiStkSwEthPortMonTable.ro Integer32 .1.3.6.1.4.1.207.8.17.5.4.1.1 |
atiStkSwEthPortErrRxBadFramesThe total number of bad frames received on this port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.4.1.2 |
atiStkSwEthPortErrCollisionsThe number of times a collision was detected on this port.ro Counter64 .1.3.6.1.4.1.207.8.17.5.4.1.3 |
atiStkSwTrapsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.6 |
atiStkSwTrapsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.6.0 |
atiStkSwIntrusionDetectionTrapThis trap is sent out when an intrusion is detected on a port
in the switch and the port security has been configured to
send traps. It includes the mac address and vlan. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.1 |
atiStkSwSTPPortStateChangeTrapThis trap is sent out when STP port state changes due to RSTP/MSTP topology changes
in the switch.
This trap is not applicable to 8300 series products. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.2 |
atiStkSwBPDUGuardIsTriggeredTrapThis trap is sent out when a BPDU guard detects a spoofed BPDU
entering the STP system thru the edge port. The BPDU guard will
disable the port and notify the system administrator. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.3 |
atiStkSwPOEPowerExceedThresholdTrapThis trap is sent out when there is a port power exceeding the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.4 |
atiStkSwPOEPowerNormalTrapThis trap is sent out when there is a port power under threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.5 |
atiStkSwFanStopSpinTrapThis trap is sent out when an error in the fan operation is
detected in a module. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.6 |
atiStkSwFanStopSpinRecoveryTrapThis trap is sent out when a fan become running Ok. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.7 |
atiStkSwTemperatureHighTrapThis trap is sent out when the temperature of a module
becomes too high. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.8 |
atiStkSwTemperatureLowTrapThis trap is sent out when the temperature of a module
becomes too low. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.9 |
atiStkSwTemperatureLimitClearTrapThis trap is sent out when it is generated when system temperature
become normal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.10 |
atiStkSwVolt5VLimitTrapThis trap is sent out when there is a port 5v power exceeds limit. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.11 |
atiStkSwVolt5VLimitClearTrapThis trap is sent out when there is a port 5v power returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.12 |
atiStkSwVoltVCCLimitTrapThis trap is sent out when there is a port VCC power exceeds limit. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.13 |
atiStkSwVoltVCCLimitClearTrapThis trap is sent out when there is a port VCC power returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.14 |
atiStkSwVoltVCCPLimitTrapThis trap is sent out when there is a port VCCP power exceeds limit. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.15 |
atiStkSwVoltVCCPLimitClearTrapThis trap is sent out when there is a port VCCP power returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.16 |
atiStkSwVolt2HalfVLimitTrapThis trap is sent out when there is a port 2.5v power exceeds limit. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.17 |
atiStkSwVolt2HalfVLimitClearTrapThis trap is sent out when there is a port 2.5v power returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.18 |
atiStkSwVolt12VLimitTrapThis trap is sent out when there is a port 12v power exceeds limit. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.19 |
atiStkSwVolt12VLimitClearTrapThis trap is sent out when there is a port 12v power returns normal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.20 |
atiStkSwPOEErrorStateTrapThis trap is sent out when there is a POE port abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.21 |
atiStkSwPOEPortResetTrapThis trap is sent out when there is a POE port reset. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.22 |
atiStkSwSysRPSStateChangedTrapThis trap is sent out when the RPS(redundant Power Supply)
changes state in the switch.
This trap is not applicable to 8300 series products. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.23 |
atiStkSwBPDUGuardFilterTriggeredTrapThis trap is sent out when a BPDU filter detects a spoofed BPDU
entering the STP system thru the edge port. The BPDU filter will
block the port and notify the system administrator. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.24 |
atiStkSwLoopProtectDetectedLoopBlockedTrapGenerated when Loop Protection feature blocks a interface with a loop. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.25 |
atiStkSwLoopProtectRecoverLoopBlockedTrapGenerated when Loop Protection feature restores a blocked interface back to normal operation. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.26 |
atiStkSwLoopProtectDetectedByLDFTrapGenerated when Loop Protection feature detects a loop by Loop Detection method. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.17.6.0.27 |
atiStkSwQoSGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.7 |
atiStkSwQosStatusTableatiStkSwQosStatusTable SEQUENCE OF AtiStkSwQosStatusEntry .1.3.6.1.4.1.207.8.17.7.1 |
atiStkSwQosStatusEntry AtiStkSwQosStatusEntry .1.3.6.1.4.1.207.8.17.7.1.1 |
atiStkSwQosStatusPortIdIndex into atiStkSwQosStatusTablero Integer32 .1.3.6.1.4.1.207.8.17.7.1.1.1 |
atiStkSwQosStatusStatusrw Enumeration .1.3.6.1.4.1.207.8.17.7.1.1.2 |
atiStkSwQosInterfaceDetailsTableatiStkSwQosInterfaceDetailsTable SEQUENCE OF AtiStkSwQosInterfaceDetailsEntry .1.3.6.1.4.1.207.8.17.7.2 |
atiStkSwQosInterfaceDetailsEntryatiStkSwQosInterfaceDetailsEntry AtiStkSwQosInterfaceDetailsEntry .1.3.6.1.4.1.207.8.17.7.2.1 |
atiStkSwQosInterfaceDetailsPortIdIndex into atiStkSwQosInterfaceDetailsPortIdro Integer32 .1.3.6.1.4.1.207.8.17.7.2.1.1 |
atiStkSwQosInterfaceDetailsDefaultQueueatiStkSwQosInterfaceDetailsDefaultQueuerw Integer32 .1.3.6.1.4.1.207.8.17.7.2.1.2 |
atiStkSwQosInterfaceDetailsTrustatiStkSwQosInterfaceDetailsDefaultQueuerw Enumeration .1.3.6.1.4.1.207.8.17.7.2.1.3 |
atiStkSwQosInterfaceDetailsSetCOSatiStkSwQosInterfaceDetailsMarkOrRemarkrw DisplayString .1.3.6.1.4.1.207.8.17.7.2.1.4 |
atiStkSwQosInterfaceDetailsSetDSCPatiStkSwQosInterfaceDetailsMarkOrRemarkrw DisplayString .1.3.6.1.4.1.207.8.17.7.2.1.5 |
atiStkSwQosInterfaceDetailsSchedularAndQueueWeightListatiStkSwQosInterfaceDetailsSchedularAndQueueWeightListrw DisplayString .1.3.6.1.4.1.207.8.17.7.2.1.6 |
atiStkSwQosCosQueueMapTableatiStkSwQosCosQueueMapTable SEQUENCE OF AtiStkSwQosCosQueueMapEntry .1.3.6.1.4.1.207.8.17.7.3 |
atiStkSwQosCosQueueMapEntryatiStkSwQosCosQueueMapEntry AtiStkSwQosCosQueueMapEntry .1.3.6.1.4.1.207.8.17.7.3.1 |
atiStkSwQosCosQueueMapPortIdIndex into atiStkSwQosCosQueueMapTablero Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.1 |
atiStkSwQosCosQueueMapCos0QueueatiStkSwQosCosQueueMapCos0Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.2 |
atiStkSwQosCosQueueMapCos1QueueatiStkSwQosCosQueueMapCos1Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.3 |
atiStkSwQosCosQueueMapCos2QueueatiStkSwQosCosQueueMapCos2Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.4 |
atiStkSwQosCosQueueMapCos3QueueatiStkSwQosCosQueueMapCos3Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.5 |
atiStkSwQosCosQueueMapCos4QueueatiStkSwQosCosQueueMapCos4Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.6 |
atiStkSwQosCosQueueMapCos5QueueatiStkSwQosCosQueueMapCos5Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.7 |
atiStkSwQosCosQueueMapCos6QueueatiStkSwQosCosQueueMapCos6Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.8 |
atiStkSwQosCosQueueMapCos7QueueatiStkSwQosCosQueueMapCos7Queuerw Integer32 .1.3.6.1.4.1.207.8.17.7.3.1.9 |
atiStkSwQosCosQueueMapDefaultMapatiStkSwQosCosQueueMapDefaultQueuerw Enumeration .1.3.6.1.4.1.207.8.17.7.3.1.10 |
atiStkSwQosDscpQueueMapTableatiStkSwQosDscpQueueMapTable SEQUENCE OF AtiStkSwQosDscpQueueMapEntry .1.3.6.1.4.1.207.8.17.7.4 |
atiStkSwQosDscpQueueMapEntryatiStkSwQosDscpQueueMapEntry AtiStkSwQosDscpQueueMapEntry .1.3.6.1.4.1.207.8.17.7.4.1 |
atiStkSwQosDscpQueueMapPortIdIndex into atiStkSwQosDscpQueueMapTablero Integer32 .1.3.6.1.4.1.207.8.17.7.4.1.1 |
atiStkSwQosDscpQueueMapQueue0atiStkSwQosDscpQueueMapQueue0rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.2 |
atiStkSwQosDscpQueueMapQueue1atiStkSwQosDscpQueueMapQueue1rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.3 |
atiStkSwQosDscpQueueMapQueue2atiStkSwQosDscpQueueMapQueue2rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.4 |
atiStkSwQosDscpQueueMapQueue3atiStkSwQosDscpQueueMapQueue3rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.5 |
atiStkSwQosDscpQueueMapQueue4atiStkSwQosDscpQueueMapQueue4rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.6 |
atiStkSwQosDscpQueueMapQueue5atiStkSwQosDscpQueueMapQueue5rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.7 |
atiStkSwQosDscpQueueMapQueue6atiStkSwQosDscpQueueMapQueue6rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.8 |
atiStkSwQosDscpQueueMapQueue7atiStkSwQosDscpQueueMapQueue7rw DisplayString .1.3.6.1.4.1.207.8.17.7.4.1.9 |
atiStkSwQosDscpQueueMapDefaultMapatiStkSwQosDscpQueueMapDefaultQueuerw Enumeration .1.3.6.1.4.1.207.8.17.7.4.1.10 |
atiStkSwTrunkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.8 |
atiStkSwStaticTrunkTableThis table contains a list of static trunk configuration present
in the switch stack. SEQUENCE OF AtiStkSwStaticTrunkEntry .1.3.6.1.4.1.207.8.17.8.1 |
atiStkSwStaticTrunkEntryThis object specifies an entry in 'atiStkSwStaticTrunkTable'
that describes the static trunk informaton for a module present in
the switch stack. AtiStkSwStaticTrunkEntry .1.3.6.1.4.1.207.8.17.8.1.1 |
atiStkSwStaticTrunkIdAn identifier for a trunk.ro Integer32 .1.3.6.1.4.1.207.8.17.8.1.1.1 |
atiStkSwStaticTrunkNameName of a trunk, once the entry has created, it
cannot be changed.ro DisplayString .1.3.6.1.4.1.207.8.17.8.1.1.2 |
atiStkSwStaticTrunkMethodTrunk distribution mode.rw Enumeration .1.3.6.1.4.1.207.8.17.8.1.1.3 |
atiStkSwStaticTrunkPortListA list of ports that used as a trunk port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.8.1.1.4 |
atiStkSwStaticTrunkStatusThe status of the trunk, either up or down.ro Enumeration .1.3.6.1.4.1.207.8.17.8.1.1.5 |
atiStkSwACLGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.9 |
atiStkSwACLConfigTableThis table contains a Access Control List (ACL) in the
switch and their associated attributes. SEQUENCE OF AtiStkSwACLConfigEntry .1.3.6.1.4.1.207.8.17.9.1 |
atiStkSwACLConfigEntryThis object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch. AtiStkSwACLConfigEntry .1.3.6.1.4.1.207.8.17.9.1.1 |
atiStkSwACLIdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.1 |
atiStkSwACLShowIdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.2 |
atiStkSwACLStatusThis object specifies the status of the ACL ID.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.3 |
atiStkSwACLActionThe action of the ACL entry either deny or permit or copy to mirror.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.4 |
atiStkSwACLTrafficTypeThe Object specifies the traffic type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.5 |
atiStkSwACLSrcTypeThe Object specifies the source type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.6 |
atiStkSwACLSrcAddrThis object displays the IPv4 address of the source of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.9.1.1.7 |
atiStkSwACLSrcMaskThis object displays the IPv4 mask of the source of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.9.1.1.8 |
atiStkSwACLDestTypeThe Object specifies the destination type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.9 |
atiStkSwACLDestAddrThis object displays the IPv4 address of the destination of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.9.1.1.10 |
atiStkSwACLDestMaskThis object displays the IPv4 mask of the destination of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.9.1.1.11 |
atiStkSwACLVlanIdThis object specifies the Vlan ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.12 |
atiStkSwACLProtocolThis object specifies the Protocol ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.13 |
atiStkSwACLICMPTypeThis object specifies the ICMP Type of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.14 |
atiStkSwACLUDPTCPSrcPortThe Object specifies the comparision of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.15 |
atiStkSwACLSrcPort1This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.16 |
atiStkSwACLSrcPort2This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.17 |
atiStkSwACLUDPTCPDestPortThe Object specifies the comparision of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.9.1.1.18 |
atiStkSwACLDestPort1This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.19 |
atiStkSwACLDestPort2This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.9.1.1.20 |
atiStkSwACLMACConfigTableThis table contains a Access Control List (ACL) in the
switch and their associated attributes. SEQUENCE OF AtiStkSwACLMACConfigEntry .1.3.6.1.4.1.207.8.17.9.2 |
atiStkSwACLMACConfigEntryThis object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch. AtiStkSwACLMACConfigEntry .1.3.6.1.4.1.207.8.17.9.2.1 |
atiStkSwACLMACIdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.9.2.1.1 |
atiStkSwACLMACShowIdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.9.2.1.2 |
atiStkSwACLMACStatusThis object specifies the status of the ACL ID.rw Enumeration .1.3.6.1.4.1.207.8.17.9.2.1.3 |
atiStkSwACLMACActionThe action of the ACL entry either deny or permit or copy to mirror.rw Enumeration .1.3.6.1.4.1.207.8.17.9.2.1.4 |
atiStkSwACLMACSrcThis object specifies the source type.rw Enumeration .1.3.6.1.4.1.207.8.17.9.2.1.5 |
atiStkSwACLMACDestThis object specifies destination type.rw Enumeration .1.3.6.1.4.1.207.8.17.9.2.1.6 |
atiStkSwACLMACSrcMacThe MAC address Mask used by this source.rw DisplayString .1.3.6.1.4.1.207.8.17.9.2.1.7 |
atiStkSwACLMACSrcMacMaskThe MAC address Mask used by this source .rw DisplayString .1.3.6.1.4.1.207.8.17.9.2.1.8 |
atiStkSwACLMACDestMacThe MAC address used by this destination.rw DisplayString .1.3.6.1.4.1.207.8.17.9.2.1.9 |
atiStkSwACLMACDestMacMaskThe MAC address Mask used by this destination.rw DisplayString .1.3.6.1.4.1.207.8.17.9.2.1.10 |
atiStkSwACLInterfaceConfigTableThis table contains a Access Control List (ACL) in the
switch and their associated attributes. SEQUENCE OF AtiStkSwACLInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.9.3 |
atiStkSwACLInterfaceConfigEntryThis object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch. AtiStkSwACLInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.9.3.1 |
atiStkSwACLInterfaceModuleIdThis object specifies the Module ID of the system.ro Integer32 .1.3.6.1.4.1.207.8.17.9.3.1.1 |
atiStkSwACLInterfacePortIdThis object specifies the Port ID of the system.ro Integer32 .1.3.6.1.4.1.207.8.17.9.3.1.2 |
atiStkSwACLInterfacaeACLIdThis object specifies the created ACL ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.9.3.1.3 |
atiStkSwACLInterfacaeAddACLIdThis object specifies the ACL ID to Add.rw Integer32 .1.3.6.1.4.1.207.8.17.9.3.1.4 |
atiStkSwACLInterfacaeRemoveACLIdThis object specifies the ACL ID to Remove.rw Integer32 .1.3.6.1.4.1.207.8.17.9.3.1.5 |
atiStkSwLldpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10 |
atiStkSwLldpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.1 |
atiStkSwLldpRunThe operational mode, whether enabled or disabled, of LLDP on the device.rw Enumeration .1.3.6.1.4.1.207.8.17.10.1.1 |
atiStkSwLldpTimerThe interval at which LLDP frames are transmitted on
behalf of this LLDP agent.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.2 |
atiStkSwLldpHoldMultiplierThe time-to-live value expressed as a multiple of the
atiStkSwLldpTimer object.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.3 |
atiStkSwLldpReinitThe atiStkSwLldpReinit indicates the delay (in units of
seconds) from when lldp feature of a particular port becomes
'disabled' until re-initialization will be attempted.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.4 |
atiStkSwLldpTxDelayThe atiStkSwLldpTxDelay indicates the delay (in units
of seconds) between successive LLDP frame transmissions
initiated by value/status changes in the LLDP local systems
MIB.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.5 |
atiStkSwLldpNotificationIntervalThis object controls the transmission of LLDP notifications.
The agent must not generate more than one lldpRemTablesChange
notification-event in the indicated period.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.6 |
atiStkSwLldpFaststartCountThe atiStkSwLldpFaststartCounrw Integer32 .1.3.6.1.4.1.207.8.17.10.1.7 |
atiStkSwLldpNonStrictMedTlvOrderCheckThe atiStkSwLldpNonStrictMedTlvOrderCheckrw Enumeration .1.3.6.1.4.1.207.8.17.10.1.8 |
atiStkSwLldpConfigPortTableThe table that controls LLDP frame transmission on individual
ports. SEQUENCE OF AtiStkSwLldpConfigPortEntry .1.3.6.1.4.1.207.8.17.10.1.9 |
atiStkSwLldpConfigPortEntryLLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table. AtiStkSwLldpConfigPortEntry .1.3.6.1.4.1.207.8.17.10.1.9.1 |
atiStkSwLldpConfigModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 .1.3.6.1.4.1.207.8.17.10.1.9.1.1 |
atiStkSwLldpConfigPortIdThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
atiStkSwLldpConfigPortTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.1.9.1.2 |
atiStkSwLldpConfigDirectionThis object specifies the operation mode of the LLDP
for the indicated port - whether to transmit and/or receive
LLDP package, or do nothing.rw Enumeration .1.3.6.1.4.1.207.8.17.10.1.9.1.3 |
atiStkSwLldpConfigNotifThe atiStkSwLldpConfigNotif controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value enabled(1) means that notifications are
enabled; the value disabled(2) means that they are not.rw Enumeration .1.3.6.1.4.1.207.8.17.10.1.9.1.4 |
atiStkSwLldpConfigMgmtAddrThis object displays the IPv4 address to be advertised to neighbors
(via the Management Address TLV) via specified ports.ro IpAddress .1.3.6.1.4.1.207.8.17.10.1.9.1.5 |
atiStkSwLldpConfigTlvSelectThis enables specified optional TLVs for transmission in LLDP
advertisement via the specified ports.rw Bits .1.3.6.1.4.1.207.8.17.10.1.9.1.6 |
atiStkSwLldpConfigTlvDeselectThis disables specified optional TLVs for transmission in LLDP
advertisement via the specified ports.rw Bits .1.3.6.1.4.1.207.8.17.10.1.9.1.7 |
atiStkSwLldpConfigMedNotifThe atiStkSwLldpConfigMedNotif controls, on a per
port basis, whether or not MED notifications from the agent
are enabled. The value enabled(1) means that notifications are
enabled; the value disabled(2) means that they are not.rw Enumeration .1.3.6.1.4.1.207.8.17.10.1.9.1.8 |
atiStkSwLldpConfigMedTlvSelectThis enables specified MED TLVs for transmission in LLDP
advertisement via the specified ports.rw Bits .1.3.6.1.4.1.207.8.17.10.1.9.1.9 |
atiStkSwLldpConfigMedTlvDeselectThis disables specified MED TLVs for transmission in LLDP
advertisement via the specified ports.rw Bits .1.3.6.1.4.1.207.8.17.10.1.9.1.10 |
atiStkSwLldpConfigLocCoordThis assigns an LLDP Coordinate location information to
the specified ports. Set 0 to reset.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.9.1.11 |
atiStkSwLldpConfigLocCivicThis assigns an LLDP Civic location information to
the specified ports. Set 0 to reset.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.9.1.12 |
atiStkSwLldpConfigLocElinThis assigns an LLDP Elin location information to
the specified ports. Set 0 to reset.rw Integer32 .1.3.6.1.4.1.207.8.17.10.1.9.1.13 |
atiStkSwLldpStats OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.2 |
atiStkSwLldpStatsGlobalResetThis clears all the LLDP statistics (packet and event counters).rw Enumeration .1.3.6.1.4.1.207.8.17.10.2.1 |
atiStkSwLldpStatsTotalFramesOutThe number of LLDP frames transmitted by this LLDP agent.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.2 |
atiStkSwLldpStatsTotalFramesInThe number of valid LLDP frames received by this LLDP agent.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.3 |
atiStkSwLldpStatsTotalFramesInErrorThe number of invalid LLDP frames received by this LLDP
agent.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.4 |
atiStkSwLldpStatsTotalFramesInDroppedThe number of LLDP frames received by this LLDP agent,
and then discarded for any reason.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.5 |
atiStkSwLldpStatsTotalTLVsUnrecognizedThe number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.6 |
atiStkSwLldpStatsTotalTLVsDiscardedThe number of LLDP TLVs discarded for any reason by this LLDP
agent.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.7 |
atiStkSwLldpStatsTotalNewNeighborsThe number of times the complete set of information
advertised by a particular MSAP has been inserted into the
Neighbor/Remote table.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.8 |
atiStkSwLldpStatsTotalNeighborsDeletedThe number of times the complete set of information
advertised by a particular MSAP has been deleted from
the Neighbor/Remote table.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.9 |
atiStkSwLldpStatsTotalNeighborsDroppedThe number of times the complete set of information
advertised by a particular MSAP could not be entered into
the Neighbor/Remote table.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.10 |
atiStkSwLldpStatsTotalNeighborsAgedOutThe number of times the complete set of information
advertised by a particular MSAP has been deleted from tables
contained in the Neighbor/Remote table.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.11 |
atiStkSwLldpStatsPortTableA table containing LLDP transmission and reception statistics for
individual ports. SEQUENCE OF AtiStkSwLldpStatsPortEntry .1.3.6.1.4.1.207.8.17.10.2.12 |
atiStkSwLldpStatsPortEntryLLDP frame transmission and reception statistics for a particular port. AtiStkSwLldpStatsPortEntry .1.3.6.1.4.1.207.8.17.10.2.12.1 |
atiStkSwLldpStatsModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.2.12.1.1 |
atiStkSwLldpStatsPortIdThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
lldpStatsTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.2.12.1.2 |
atiStkSwLldpStatsFramesOutThe number of LLDP frames transmitted by this LLDP agent
on the indicated port.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.3 |
atiStkSwLldpStatsFramesInThe number of valid LLDP frames received by this LLDP agent
on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.4 |
atiStkSwLldpStatsFramesInErrorThe number of invalid LLDP frames received by this LLDP
agent on the indicated port, while this LLDP agent is enabled.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.5 |
atiStkSwLldpStatsFramesInDroppedThe number of LLDP frames received by this LLDP agent on
the indicated port, and then discarded for any reason.
This counter can provide an indication that LLDP header
formating problems may exist with the local LLDP agent in
the sending system or that LLDPDU validation problems may
exist with the local LLDP agent in the receiving system.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.6 |
atiStkSwLldpStatsTLVsUnrecognizedThe number of LLDP TLVs received on the given port that
are not recognized by this LLDP agent on the indicated port.
An unrecognized TLV is referred to as the TLV whose type value
is in the range of reserved TLV types (000 1001 - 111 1110)
in Table 9.1 of IEEE Std 802.1AB-2005. An unrecognized
TLV may be a basic management TLV from a later LLDP version.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.7 |
atiStkSwLldpStatsTLVsDiscardedThe number of LLDP TLVs discarded for any reason by this LLDP
agent on the indicated port.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.8 |
atiStkSwLldpStatsNewNeighborsThe number of times the complete set of information
advertised by a particular MSAP has been inserted into tables
contained in the Neighbor/Remote table associated with the
indicated port.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.9 |
atiStkSwLldpStatsNeighborsDeletedThe number of times the complete set of information
advertised by a particular MSAP has been deleted from
the Neighbor/Remote table associated with the indicated port.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.10 |
atiStkSwLldpStatsNeighborsDroppedThe number of times the complete set of information
advertised by a particular MSAP could not be entered into
the Neighbor/Remote table associated with the indicated
port because of insufficient resources.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.11 |
atiStkSwLldpStatsNeighborsAgedOutThe counter that represents the number of age-outs that
occurred on a given port. An age-out is the number of
times the complete set of information advertised by a
particular MSAP has been deleted from tables contained in
the Neighbor/Remote table because the information timeliness
interval has expired.ro Counter32 .1.3.6.1.4.1.207.8.17.10.2.12.1.12 |
atiStkSwLldpStatsResetThis clears all the LLDP statistics (packet and event counters)
associated with the indicated port.rw Enumeration .1.3.6.1.4.1.207.8.17.10.2.12.1.13 |
atiStkSwLldpLocalData OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.3 |
atiStkSwLldpLocalInfoTableThis table contains one or more rows per port information
associated with the local system known to this agent. SEQUENCE OF AtiStkSwLldpLocalInfoEntry .1.3.6.1.4.1.207.8.17.10.3.1 |
atiStkSwLldpLocalInfoEntryInformation about a particular port component. AtiStkSwLldpLocalInfoEntry .1.3.6.1.4.1.207.8.17.10.3.1.1 |
atiStkSwLldpLocModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.3.1.1.1 |
atiStkSwLldpLocPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.
The value of this object is used as a port index to the
atiStkSwLldpLocalInfoTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.1.1.2 |
atiStkSwLldpLocChassisIdSubtypeThe type of encoding used to identify the chassis
associated with the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.1.1.3 |
atiStkSwLldpLocChassisIdThe string value used to identify the chassis component
associated with the local system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.1.1.4 |
atiStkSwLldpLocPortIdSubtypeThe type of port identifier encoding used in the associated
atiStkSwLldpLocPortId object.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.1.1.5 |
atiStkSwLldpLocPortIdThe string value used to identify the port component
associated with a given port in the local system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.1.1.6 |
atiStkSwLldpLocTtlTime-to-live advertised by the given portro Integer32 .1.3.6.1.4.1.207.8.17.10.3.1.1.7 |
atiStkSwLldpLocPortDescThe string value used to identify the 802 LAN station's port
description associated with the local system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.1.1.8 |
atiStkSwLldpLocSysNameThe string value used to identify the system name of the
local system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.1.1.9 |
atiStkSwLldpLocSysDescThe string value used to identify the system description
of the local system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.1.1.10 |
atiStkSwLldpLocSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the local system.ro Bits .1.3.6.1.4.1.207.8.17.10.3.1.1.11 |
atiStkSwLldpLocSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the local system.ro Bits .1.3.6.1.4.1.207.8.17.10.3.1.1.12 |
atiStkSwLldpLocManAddrSubtypeThe type of management address identifier encoding used in
the associated atiStkSwLldpLocManagmentAddr object.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.1.1.13 |
atiStkSwLldpLocManAddrThe string value used to identify the management address
component associated with the local system. The purpose of
this address is to contact the management entity.ro IpAddress .1.3.6.1.4.1.207.8.17.10.3.1.1.14 |
atiStkSwLldpLocManAddrLenThe total lenght of the management address subtype and the
management address fields in LLDPDUs transmitted by the local
LLDP agent.The management address length field is needed so that the
receiving systems that do not implement SNMP will not be
required to implement an iana family numbers/address length
equivalency table in order to decode the management addressro Integer32 .1.3.6.1.4.1.207.8.17.10.3.1.1.15 |
atiStkSwLldpLocManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.1.1.16 |
atiStkSwLldpLocManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the local system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.1.1.17 |
atiStkSwLldpLocManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the local system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.3.1.1.18 |
atiStkSwLldpDot1LocTableThis table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent. SEQUENCE OF AtiStkSwLldpDot1LocEntry .1.3.6.1.4.1.207.8.17.10.3.2 |
atiStkSwLldpDot1LocEntryInformation about IEEE 802.1 organizationally defined
LLDP extension. AtiStkSwLldpDot1LocEntry .1.3.6.1.4.1.207.8.17.10.3.2.1 |
atiStkSwLldpDot1LocModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.3.2.1.1 |
atiStkSwLldpDot1LocPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.2.1.2 |
atiStkSwLldpDot1LocPortVlanIdThe integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation.ro Integer32 (0|1..4094) .1.3.6.1.4.1.207.8.17.10.3.2.1.3 |
atiStkSwLldpDot1LocProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPVID) or does
not support port and protocol VLAN operation.ro Integer32 (0|1..4094) .1.3.6.1.4.1.207.8.17.10.3.2.1.4 |
atiStkSwLldpDot1LocProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.2.1.5 |
atiStkSwLldpDot1LocProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.2.1.6 |
atiStkSwLldpDot1LocVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible.ro DisplayString -- Integer32 .1.3.6.1.4.1.207.8.17.10.3.2.1.7 |
atiStkSwLldpDot1LocVlanNameThe string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.
This object should contain the value of the dot1QVLANStaticName
object (defined in IETF RFC 2674) identified with the given
atiStkSwLldpDot1LocVlanId.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.2.1.8 |
atiStkSwLldpDot1LocProtocolIdThe octet string value used to identify the protocols
associated with the given port of the local system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.2.1.9 |
atiStkSwLldpLocalDot3Data OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.3.3 |
atiStkSwLldpDot3LocTableThis table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent. SEQUENCE OF AtiStkSwLldpDot3LocEntry .1.3.6.1.4.1.207.8.17.10.3.3.1 |
atiStkSwLldpDot3LocEntryInformation about a particular port component. AtiStkSwLldpDot3LocEntry .1.3.6.1.4.1.207.8.17.10.3.3.1.1 |
atiStkSwLldpDot3LocModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.3.3.1.1.1 |
atiStkSwLldpDot3LocPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.3.1.1.2 |
atiStkSwLldpDot3LocPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.3 |
atiStkSwLldpDot3LocPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.4 |
atiStkSwLldpDot3LocPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.ro Bits .1.3.6.1.4.1.207.8.17.10.3.3.1.1.5 |
atiStkSwLldpDot3LocPortOperMauTypeAn integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.6 |
atiStkSwLldpDot3LocPowerPortClassThe value that identifies the port Class of the given port
associated with the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.7 |
atiStkSwLldpDot3LocPowerMDISupportedThe truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.8 |
atiStkSwLldpDot3LocPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.9 |
atiStkSwLldpDot3LocPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
local system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.3.3.1.1.10 |
atiStkSwLldpDot3LocPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system.ro Integer32 (1|2) .1.3.6.1.4.1.207.8.17.10.3.3.1.1.11 |
atiStkSwLldpDot3LocPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system.ro Integer32 (1|2|3|4|5) .1.3.6.1.4.1.207.8.17.10.3.3.1.1.12 |
atiStkSwLldpDot3LocLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro Bits .1.3.6.1.4.1.207.8.17.10.3.3.1.1.13 |
atiStkSwLldpDot3LocLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.
If the port is not in link aggregation state and/or it
does not support link aggregation, this value should be set
to zero.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.207.8.17.10.3.3.1.1.14 |
atiStkSwLldpDot3LocMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the given port of the local system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.3.1.1.15 |
atiStkSwLldpLocalMedData OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.3.4 |
atiStkSwLldpMedLocTableThis table contains one row per port of LLDP-MED
information on the local system known to this agent. SEQUENCE OF AtiStkSwLldpMedLocEntry .1.3.6.1.4.1.207.8.17.10.3.4.1 |
atiStkSwLldpMedLocEntryInformation about a particular port component. AtiStkSwLldpMedLocEntry .1.3.6.1.4.1.207.8.17.10.3.4.1.1 |
atiStkSwLldpMedLocModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.3.4.1.1.1 |
atiStkSwLldpMedLocPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.4.1.1.2 |
atiStkSwLldpMedLocDeviceClassLocal Device Class.ro AtiStkSwLldpMedDeviceClass .1.3.6.1.4.1.207.8.17.10.3.4.1.1.3 |
atiStkSwLldpMedLocCapabilitiesThe bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible for the respective port
on the LLDP agent of the device. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent supports the
corresponding TLV.ro AtiStkSwLldpMedCapabilities .1.3.6.1.4.1.207.8.17.10.3.4.1.1.4 |
atiStkSwLldpMedLocMediaPolicyAppTypeThe media type that defines the primary function of the
application for the policy advertised by an endpoint.ro PolicyAppType .1.3.6.1.4.1.207.8.17.10.3.4.1.1.5 |
atiStkSwLldpMedLocMediaPolicyPriorityThis object contains the value of the 802.1p priority
which is associated with the given port on the
local system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.4.1.1.7 |
atiStkSwLldpMedLocMediaPolicyDscpThis object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with the given port on the local system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.3.4.1.1.8 |
atiStkSwLldpMedLocMediaPolicyUnknownA value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' indicates that this network policy
is definedro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.4.1.1.9 |
atiStkSwLldpMedLocMediaPolicyTaggedA value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevancero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.4.1.1.10 |
atiStkSwLldpMedLocHardwareRevThe vendor-specific hardware revision string
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.11 |
atiStkSwLldpMedLocFirmwareRevThe vendor-specific firmware revision string
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.12 |
atiStkSwLldpMedLocSoftwareRevThe vendor-specific software revision string
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.13 |
atiStkSwLldpMedLocSerialNumThe vendor-specific serial number
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.14 |
atiStkSwLldpMedLocMfgNameThe vendor-specific manufacturer name
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.15 |
atiStkSwLldpMedLocModelNameThe vendor-specific model name
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.16 |
atiStkSwLldpMedLocAssetIDThe vendor-specific asset tracking identifier
as advertised by the endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.3.4.1.1.17 |
atiStkSwLldpMedLocCoordLocationCoordinate based location informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.4.1.1.18 |
atiStkSwLldpMedLocCivicLocationCivic location informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.4.1.1.19 |
atiStkSwLldpMedLocElinLocationElin location informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.3.4.1.1.20 |
atiStkSwLldpRemoteData OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.4 |
atiStkSwLldpRemBaseTableThis table contains one or more rows per physical network
connection known to this agent. SEQUENCE OF AtiStkSwLldpRemBaseEntry .1.3.6.1.4.1.207.8.17.10.4.1 |
atiStkSwLldpRemBaseEntryInformation about a particular physical network connection. AtiStkSwLldpRemBaseEntry .1.3.6.1.4.1.207.8.17.10.4.1.1 |
atiStkSwLldpRemModuleNumThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.1.1.1 |
atiStkSwLldpRemPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The atiStkSwLldpRemPortNum
identifies the port on which the remote system information
is received.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.1.1.2 |
atiStkSwLldpRemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.1.1.3 |
atiStkSwLldpRemChassisIdSubtypeThe type of encoding used to identify the chassis associated
with the remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.1.1.4 |
atiStkSwLldpRemChassisIdThe string value used to identify the chassis component
associated with the remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.1.1.5 |
atiStkSwLldpRemPortIdSubtypeThe type of port identifier encoding used in the associated
atiStkSwLldpRemPortId object.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.1.1.6 |
atiStkSwLldpRemPortIdThe string value used to identify the port component
associated with the remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.1.1.7 |
atiStkSwLldpRemTtlTime-to-live advertised by the remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.1.1.8 |
atiStkSwLldpRemPortDescThe string value used to identify the description of
the given port associated with the remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.1.1.9 |
atiStkSwLldpRemSysNameThe string value used to identify the system name of the
remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.1.1.10 |
atiStkSwLldpRemSysDescThe string value used to identify the system description
of the remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.1.1.11 |
atiStkSwLldpRemSysCapSupportedThe bitmap value used to identify which system capabilities
are supported on the remote system.ro Bits .1.3.6.1.4.1.207.8.17.10.4.1.1.12 |
atiStkSwLldpRemSysCapEnabledThe bitmap value used to identify which system capabilities
are enabled on the remote system.ro Bits .1.3.6.1.4.1.207.8.17.10.4.1.1.13 |
atiStkSwLldpRemManAddrSubtypeThe type of management address identifier encoding used in
the associated atiStkSwLldpRemManAddr object.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.1.1.14 |
atiStkSwLldpRemManAddrThe string value used to identify the management address
component associated with the remote system. The purpose
of this address is to contact the management entity.ro IpAddress .1.3.6.1.4.1.207.8.17.10.4.1.1.15 |
atiStkSwLldpRemManAddrIfSubtypeThe enumeration value that identifies the interface numbering
method used for defining the interface number, associated
with the remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.1.1.16 |
atiStkSwLldpRemManAddrIfIdThe integer value used to identify the interface number
regarding the management address component associated with
the remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.1.1.17 |
atiStkSwLldpRemManAddrOIDThe OID value used to identify the type of hardware component
or protocol entity associated with the management address
advertised by the remote system agent.ro OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.4.1.1.18 |
atiStkSwLldpDot1RemTableThis table contains one or more rows per physical network
connection known to this agent. SEQUENCE OF AtiStkSwLldpDot1RemEntry .1.3.6.1.4.1.207.8.17.10.4.2 |
atiStkSwLldpDot1RemEntryInformation about a particular port component. AtiStkSwLldpDot1RemEntry .1.3.6.1.4.1.207.8.17.10.4.2.1 |
atiStkSwLldpDot1RemModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.2.1.1 |
atiStkSwLldpDot1RemPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The atiStkSwLldpRemPortNum
identifies the port on which the remote system information
is received.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.2.1.2 |
atiStkSwLldpDot1RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.2.1.3 |
atiStkSwLldpDot1RemPortVlanIdThe integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of atiStkSwLldpDot1RemPortVlanId should
be zero.ro Integer32 (0|1..4094) .1.3.6.1.4.1.207.8.17.10.4.2.1.4 |
atiStkSwLldpDot1RemProtoVlanIdThe integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.
If port and protocol VLANs are not supported on the given
port associated with the remote system, or if the port is
not enabled with any port and protocol VLAN, the value of
atiStkSwLldpDot1RemProtoVlanId should be zero.ro Integer32 (0|1..4094) .1.3.6.1.4.1.207.8.17.10.4.2.1.5 |
atiStkSwLldpDot1RemProtoVlanSupportedThe truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.2.1.6 |
atiStkSwLldpDot1RemProtoVlanEnabledThe truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.2.1.7 |
atiStkSwLldpDot1RemVlanIdThe integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.2.1.8 |
atiStkSwLldpDot1RemVlanNameThe string value used to identify VLAN name identified by the
VLAN Id associated with the remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.2.1.9 |
atiStkSwLldpDot1RemProtocolIdThe octet string value used to identify the protocols
associated with the given port of remote system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.2.1.10 |
atiStkSwLldpRemDot3Data OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.4.3 |
atiStkSwLldpDot3RemTableThis table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system. SEQUENCE OF AtiStkSwLldpDot3RemEntry .1.3.6.1.4.1.207.8.17.10.4.3.1 |
atiStkSwLldpDot3RemEntryInformation about a particular physical network connection. AtiStkSwLldpDot3RemEntry .1.3.6.1.4.1.207.8.17.10.4.3.1.1 |
atiStkSwLldpDot3RemModuleNumThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.3.1.1.1 |
atiStkSwLldpDot3RemPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry. The atiStkSwLldpDot3RemPortNum
identifies the port on which the remote system information
is received.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.3.1.1.2 |
atiStkSwLldpDot3RemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.3.1.1.3 |
atiStkSwLldpDot3RemPortAutoNegSupportedThe truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.4 |
atiStkSwLldpDot3RemPortAutoNegEnabledThe truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.5 |
atiStkSwLldpDot3RemPortAutoNegAdvertisedCapThis object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.ro Bits .1.3.6.1.4.1.207.8.17.10.4.3.1.1.6 |
atiStkSwLldpDot3RemPortOperMauTypeAn integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.7 |
atiStkSwLldpDot3RemPowerPortClassThe value that identifies the port Class of the given port
associated with the remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.8 |
atiStkSwLldpDot3RemPowerMDISupportedThe truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.9 |
atiStkSwLldpDot3RemPowerMDIEnabledThe truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.10 |
atiStkSwLldpDot3RemPowerPairControlableThe truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with the
remote system.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.3.1.1.11 |
atiStkSwLldpDot3RemPowerPairsThis object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.ro Integer32 (1|2) .1.3.6.1.4.1.207.8.17.10.4.3.1.1.12 |
atiStkSwLldpDot3RemPowerClassThis object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.ro Integer32 (1|2|3|4|5) .1.3.6.1.4.1.207.8.17.10.4.3.1.1.13 |
atiStkSwLldpDot3RemLinkAggStatusThe bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.ro Bits .1.3.6.1.4.1.207.8.17.10.4.3.1.1.14 |
atiStkSwLldpDot3RemLinkAggPortIdThis object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
If the remote port is not in link aggregation state and/or
it does not support link aggregation, this value should be
zero.ro Integer32 (0|1..2147483647) .1.3.6.1.4.1.207.8.17.10.4.3.1.1.15 |
atiStkSwLldpDot3RemMaxFrameSizeAn integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.3.1.1.16 |
atiStkSwLldpRemMedData OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.10.4.4 |
atiStkSwLldpMedRemTableThis table contains LLDP-MED information of the remote
system. SEQUENCE OF AtiStkSwLldpMedRemEntry .1.3.6.1.4.1.207.8.17.10.4.4.1 |
atiStkSwLldpMedRemEntryInformation about a particular physical network connection. AtiStkSwLldpMedRemEntry .1.3.6.1.4.1.207.8.17.10.4.4.1.1 |
atiStkSwLldpMedRemModuleIdThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.4.1.1.1 |
atiStkSwLldpMedRemPortNumThe index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.4.1.1.2 |
atiStkSwLldpMedRemIndexThis object represents an arbitrary local integer value used
by this agent to identify a particular connection instance,
unique only for the indicated remote system.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.4.1.1.3 |
atiStkSwLldpMedRemDeviceClassDevice Class as advertised by the device remotely connected to the
port.ro AtiStkSwLldpMedDeviceClass .1.3.6.1.4.1.207.8.17.10.4.4.1.1.4 |
atiStkSwLldpMedRemCapabilitiesThe bitmap includes the MED organizationally defined set of LLDP
TLVs whose transmission is possible on the LLDP agent of the remote
device connected to this port. Each bit in the bitmap corresponds
to an LLDP-MED subtype associated with a specific TIA TR41.4 MED
optional TLV. If the bit is set, the agent has the capability
to support the corresponding TLV.ro AtiStkSwLldpMedCapabilities .1.3.6.1.4.1.207.8.17.10.4.4.1.1.5 |
atiStkSwLldpMedRemMediaPolicyAppTypeThe media type that defines the primary function of the
application for the policy advertised by the endpoint connected
remotely to this port. PolicyAppType .1.3.6.1.4.1.207.8.17.10.4.4.1.1.6 |
atiStkSwLldpMedRemMediaPolicyVlanIDAn extension of the VLAN Identifier for the remote system
connected to this port, as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID.
A value of 0 shall be used if the device is using priority tagged
frames, meaning that only the 802.1p priority level is significant
and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use.ro Integer32 (0|1..4094|4095) .1.3.6.1.4.1.207.8.17.10.4.4.1.1.7 |
atiStkSwLldpMedRemMediaPolicyPriorityThis object contains the value of the 802.1p priority
which is associated with the remote system connected at
given port.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.4.1.1.8 |
atiStkSwLldpMedRemMediaPolicyDscpThis object contains the value of the Differentiated Service
Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475
which is associated with remote system connected at the port.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.4.1.1.9 |
atiStkSwLldpMedRemMediaPolicyUnknownA value of 'true' indicates that the
network policy for the specified application type is
currently unknown. In this case, the VLAN ID, the
layer 2 priority and the DSCP value fields are ignored.
A value of 'false' indicates that this network policy
is defined.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.4.1.1.10 |
atiStkSwLldpMedRemMediaPolicyTaggedA value of 'true' indicates that the application is using a
tagged VLAN.
A value of 'false' indicates that for the specific application
the device either is using an untagged VLAN or does not
support port based VLAN operation. In this case, both the
VLAN ID and the Layer 2 priority fields are ignored and
only the DSCP value has relevancero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.4.1.1.11 |
atiStkSwLldpMedRemHardwareRevThe vendor-specific hardware revision string
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.12 |
atiStkSwLldpMedRemFirmwareRevThe vendor-specific firmware revision string
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.13 |
atiStkSwLldpMedRemSoftwareRevThe vendor-specific software revision string
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.14 |
atiStkSwLldpMedRemSerialNumThe vendor-specific serial number
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.15 |
atiStkSwLldpMedRemMfgNameThe vendor-specific manufacturer name
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.16 |
atiStkSwLldpMedRemModelNameThe vendor-specific model name
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.17 |
atiStkSwLldpMedRemAssetIDThe vendor-specific asset tracking identifier
as advertised by the remote endpoint.ro DisplayString .1.3.6.1.4.1.207.8.17.10.4.4.1.1.18 |
atiStkSwLldpMedRemXPoEDeviceTypeDefines the type of Power-via-MDI (Power over Ethernet) advertised
by the remote device.
A value pseDevice(2) indicates that the device is advertised as a
Power Sourcing Entity (PSE).
A value pdDevice(3) indicates that the device is advertised as a
Powered Device (PD).
A value none(4) indicates that the device does not support PoE.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.4.1.1.19 |
atiStkSwLldpMedRemXPoEPSEPowerAvThis object contains the value of the power available from the
PSE via this port expressed in units of 0.1 watts on the remote
device.ro Gauge32 .1.3.6.1.4.1.207.8.17.10.4.4.1.1.20 |
atiStkSwLldpMedRemXPoEPSEPowerSourceDefines the type of PSE Power Source advertised
by the remote device.
A value primary(2) indicates that the device advertises its power
source as primary.
A value backup(3) indicates that the device advertises its power
Source as backup.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.4.1.1.21 |
atiStkSwLldpMedRemXPoEPSEPowerPriorityThis object contains the value of the PSE power priority
advertised by the remote device.
A value critical(2) indicates that the device advertises its power
priority as critical, as per RFC 3621.
A value high(3) indicates that the device advertises its power
priority as high, as per RFC 3621.
A value low(4) indicates that the device advertises its power
priority as low, as per RFC 3621.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.4.1.1.22 |
atiStkSwLldpMedRemXPoEPDPowerReqThis object contains the value of the power required by a
PD connected remotely to the port
expressed in units of 0.1 watts.ro Gauge32 .1.3.6.1.4.1.207.8.17.10.4.4.1.1.23 |
atiStkSwLldpMedRemXPoEPDPowerSourceDefines the type of Power Source advertised as being used
by the device connected remotely to the port.
A value fromPSE(2) indicates that the device advertises its power
source as received from a PSE.
A value local(3) indicates that the device advertises its power
source as local.
A value localAndPSE(4) indicates that the device advertises its
power source as using both local and PSE power.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.4.1.1.24 |
atiStkSwLldpMedRemXPoEPDPowerPriorityDefines the priority advertised as being required by the PD
connected remotely to the port.
A value critical(2) indicates that the device advertises its power
Priority as critical, as per RFC 3621.
A value high(3) indicates that the device advertises its power
Priority as high, as per RFC 3621.
A value low(4) indicates that the device advertises its power
Priority as low, as per RFC 3621.ro Enumeration .1.3.6.1.4.1.207.8.17.10.4.4.1.1.25 |
atiStkSwLldpMedRemCoordLocationCoordinate based location informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.4.1.1.26 |
atiStkSwLldpMedRemCivicLocationCivic location informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.4.1.1.27 |
atiStkSwLldpMedRemElinLocationElin location informationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.4.4.1.1.28 |
atiStkSwLldpRemResetTableThis table resets the Neighbor Table of the specified port. SEQUENCE OF AtiStkSwLldpRemResetEntry .1.3.6.1.4.1.207.8.17.10.4.5 |
atiStkSwLldpRemResetEntrySelection of module and port number for Neighbor Table to be reset. AtiStkSwLldpRemResetEntry .1.3.6.1.4.1.207.8.17.10.4.5.1 |
atiStkSwLldpRemResetModuleNumThis object specifies the ID of a module present in the switch
stack.ro Integer32 -- .1.3.6.1.4.1.207.8.17.10.4.5.1.1 |
atiStkSwLldpRemResetPortNumThe index value used to identify the port component
for Neighbor Table to be reset.ro Integer32 .1.3.6.1.4.1.207.8.17.10.4.5.1.2 |
atiStkSwLldpRemResetSelect 'yes' for Neighbor Table to be reset.rw Enumeration .1.3.6.1.4.1.207.8.17.10.4.5.1.3 |
atiStkSwLldpCivicLocationTableA table of the LLDP civic-location. SEQUENCE OF AtiStkSwLldpCivicLocationEntry .1.3.6.1.4.1.207.8.17.10.5 |
atiStkSwLldpCivicLocationEntryAttributes of an LLDP civiv-location. AtiStkSwLldpCivicLocationEntry .1.3.6.1.4.1.207.8.17.10.5.1 |
atiStkSwLldpCivicLocationIdentifierIndex into atiStkSwLldpCivicLocationTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.5.1.1 |
atiStkSwLldpCivicLocationValidThe civiv-location status.rw Enumeration .1.3.6.1.4.1.207.8.17.10.5.1.2 |
atiStkSwLldpCoordLocationTableA table of the LLDP coord-location. SEQUENCE OF AtiStkSwLldpCoordLocationEntry .1.3.6.1.4.1.207.8.17.10.6 |
atiStkSwLldpCoordLocationEntryAttributes of an LLDP coord-location. AtiStkSwLldpCoordLocationEntry .1.3.6.1.4.1.207.8.17.10.6.1 |
atiStkSwLldpCoordLocationIdentifierIndex into atiStkSwLldpCoordLocationTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.6.1.1 |
atiStkSwLldpCoordLocationValidThe coord-location status.rw Enumeration .1.3.6.1.4.1.207.8.17.10.6.1.2 |
atiStkSwLldpElinLocationTableA table of the LLDP elin-location. SEQUENCE OF AtiStkSwLldpElinLocationEntry .1.3.6.1.4.1.207.8.17.10.7 |
atiStkSwLldpElinLocationEntryAttributes of an LLDP elin-location. AtiStkSwLldpElinLocationEntry .1.3.6.1.4.1.207.8.17.10.7.1 |
atiStkSwLldpElinLocationIdentifierIndex into atiStkSwLldpElinLocationTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.7.1.1 |
atiStkSwLldpElinLocationElinIdThe name of the elin-location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.7.1.2 |
atiStkSwLldpSetCivicLocationTableA table of the LLDP set civic-location. SEQUENCE OF AtiStkSwLldpSetCivicLocationEntry .1.3.6.1.4.1.207.8.17.10.8 |
atiStkSwLldpSetCivicLocationEntryAttributes of an LLDP set civic-location. AtiStkSwLldpSetCivicLocationEntry .1.3.6.1.4.1.207.8.17.10.8.1 |
atiStkSwLldpSetCivicLocationIdentifierIndex into atiStkSwLldpSetCivicLocationTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.8.1.1 |
atiStkSwLldpSetCivicLocationCountryThe country of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.2 |
atiStkSwLldpSetCivicLocationStateThe state of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.3 |
atiStkSwLldpSetCivicLocationCountyThe county of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.4 |
atiStkSwLldpSetCivicLocationCityThe city of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.5 |
atiStkSwLldpSetCivicLocationDivisionThe division of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.6 |
atiStkSwLldpSetCivicLocationNeighborhoodThe neighborhood of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.7 |
atiStkSwLldpSetCivicLocationStreetGroupThe street group of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.8 |
atiStkSwLldpSetCivicLocationLeadingStreetDirectionThe leading street direction of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.9 |
atiStkSwLldpSetCivicLocationTrailingStreetDirectionThe trailing street direction of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.10 |
atiStkSwLldpSetCivicLocationStreetSuffixThe street suffix of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.11 |
atiStkSwLldpSetCivicLocationHouseNumberThe house number of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.12 |
atiStkSwLldpSetCivicLocationHouseNumberSuffixThe house number suffix of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.13 |
atiStkSwLldpSetCivicLocationLandmarkThe landmark of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.14 |
atiStkSwLldpSetCivicLocationAdditionalInformationThe additional information of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.15 |
atiStkSwLldpSetCivicLocationNameThe name of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.16 |
atiStkSwLldpSetCivicLocationPostalCodeThe postal code of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.17 |
atiStkSwLldpSetCivicLocationBuildingThe building of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.18 |
atiStkSwLldpSetCivicLocationUnitThe unit of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.19 |
atiStkSwLldpSetCivicLocationFloorThe floor of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.20 |
atiStkSwLldpSetCivicLocationRoomThe room of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.21 |
atiStkSwLldpSetCivicLocationPlaceTypeThe place type of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.22 |
atiStkSwLldpSetCivicLocationPostalCommunityNameThe postal community name of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.23 |
atiStkSwLldpSetCivicLocationPostOfficeBoxThe post office box of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.24 |
atiStkSwLldpSetCivicLocationAdditionalCodeThe additional code of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.25 |
atiStkSwLldpSetCivicLocationSeatThe seat of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.26 |
atiStkSwLldpSetCivicLocationPrimaryRoadNameThe primary road name of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.27 |
atiStkSwLldpSetCivicLocationRoadSectionThe road section of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.28 |
atiStkSwLldpSetCivicLocationBranchRoadNameThe branch road name of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.29 |
atiStkSwLldpSetCivicLocationSubBranchRoadNameThe sub branch road name of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.30 |
atiStkSwLldpSetCivicLocationStreetNamePreModifierThe street name pre modifier of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.31 |
atiStkSwLldpSetCivicLocationStreetNamePostModifierThe street name post modifier of the civic-location.rw DisplayString .1.3.6.1.4.1.207.8.17.10.8.1.32 |
atiStkSwLldpSetCivicLocationCreateDeleteIdentifierCreate and delete an identifierrw Enumeration .1.3.6.1.4.1.207.8.17.10.8.1.33 |
atiStkSwLldpSetCoordLocationTableA table of the LLDP set Coord-location. SEQUENCE OF AtiStkSwLldpSetCoordLocationEntry .1.3.6.1.4.1.207.8.17.10.9 |
atiStkSwLldpSetCoordLocationEntryAttributes of an LLDP set Coord-location. AtiStkSwLldpSetCoordLocationEntry .1.3.6.1.4.1.207.8.17.10.9.1 |
atiStkSwLldpSetCoordLocationIdentifierIndex into atiStkSwLldpSetCoordLocationTable.ro Integer32 .1.3.6.1.4.1.207.8.17.10.9.1.1 |
atiStkSwLldpSetCoordLocationLatitudeLatitude for set Coord-location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.9.1.2 |
atiStkSwLldpSetCoordLocationLatResolutionLatitude Resolution for set Coord-location.rw Integer32 .1.3.6.1.4.1.207.8.17.10.9.1.3 |
atiStkSwLldpSetCoordLocationLongitudeLongitude for set Coord-location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.9.1.4 |
atiStkSwLldpSetCoordLocationLongiResolutionLongitude Resolution for set Coord-location.rw Integer32 .1.3.6.1.4.1.207.8.17.10.9.1.5 |
atiStkSwLldpSetCoordLocationAltitudeAltitude for set Coord-location.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.10.9.1.6 |
atiStkSwLldpSetCoordLocationAltTypeAlt Type for set Coord-location.rw Enumeration .1.3.6.1.4.1.207.8.17.10.9.1.7 |
atiStkSwLldpSetCoordLocationAltResolutionAlt Resolution for set Coord-location.rw Integer32 .1.3.6.1.4.1.207.8.17.10.9.1.8 |
atiStkSwLldpSetCoordLocationDatumDatum for set Coord-location.rw Enumeration .1.3.6.1.4.1.207.8.17.10.9.1.9 |
atiSflowRcvrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.11 |
atiSflowRcvrTableA table of the receivers of sFlow information. SEQUENCE OF AtiSflowRcvrEntry .1.3.6.1.4.1.207.8.17.11.1 |
atiSflowRcvrEntryAttributes of an sFlow Receiver. AtiSflowRcvrEntry .1.3.6.1.4.1.207.8.17.11.1.1 |
atiSflowRcvrIndexIndex into sFlowReceiverTable.ro Integer32 .1.3.6.1.4.1.207.8.17.11.1.1.1 |
atiSflowRcvrAddressThe IP address of the sFlow collector.
If set to 0.0.0.0 not sFlow datagrams will be sent.rw IpAddress .1.3.6.1.4.1.207.8.17.11.1.1.2 |
atiSflowRcvrPortThe destination port for sFlow datagrams.rw Integer32 .1.3.6.1.4.1.207.8.17.11.1.1.3 |
atiSflowFsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.12 |
atiSflowFsTableA table of the flow samplers within a device. SEQUENCE OF AtiSflowFsEntry .1.3.6.1.4.1.207.8.17.12.1 |
atiSflowFsEntryAttributes of a flow sampler. AtiSflowFsEntry .1.3.6.1.4.1.207.8.17.12.1.1 |
atiSflowFsPortThe sFlow instance for this flow sampler.ro Integer32 .1.3.6.1.4.1.207.8.17.12.1.1.1 |
atiSflowFsPacketSamplingRateThe statistical sampling rate for packet sampling from this
source.
Set to N to sample 1/Nth of the packets in the monitored flows.
An agent should choose its own algorithm to introduce variance
into the sampling so that exactly every Nth packet is not
counted. A sampling rate of 1 counts all packets. A sampling
rate of 0 disables sampling.
The agent is permitted to have minimum and maximum allowable
values for the sampling rate. A minimum rate lets the agent
designer set an upper bound on the overhead associated with
sampling, and a maximum rate may be the result of hardware
restrictions (such as counter size). In addition not all values
between the maximum and minimum may be realizable as the
sampling rate (again because of implementation considerations).
When the sampling rate is set the agent is free to adjust the
value so that it lies between the maximum and minimum values
and has the closest achievable value.
When read, the agent must return the actual sampling rate it
will be using (after the adjustments previously described). The
sampling algorithm must converge so that over time the number
of packets sampled approaches 1/Nth of the total number of
packets in the monitored flows.rw Integer32 .1.3.6.1.4.1.207.8.17.12.1.1.2 |
atiSflowCpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.13 |
atiSflowCpTableA table of the counter pollers within a device. SEQUENCE OF AtiSflowCpEntry .1.3.6.1.4.1.207.8.17.13.1 |
atiSflowCpEntryAttributes of a counter poller. AtiSflowCpEntry .1.3.6.1.4.1.207.8.17.13.1.1 |
atiSflowCpPortThe sFlowInstance for this counter poller.ro Integer32 .1.3.6.1.4.1.207.8.17.13.1.1.1 |
atiSflowCpIntervalThe maximum number of seconds between successive samples of the
counters associated with this data source. A sampling interval
of 0 disables counter sampling.
The agent is permitted to have minimum and maximum allowable
values for the counter polling interval. A minimum interval
lets the agent designer set an upper bound on the overhead
associated with polling, and a maximum interval may be the
result of implementation restrictions (such as counter size).
In addition not all values between the maximum and minimum may
be realizable as the sampling interval (again because of
implementation considerations).
When the sampling rate is set the agent is free to adjust the
value so that it lies between the maximum and minimum values
and has the closest achievable value.
When read, the agent must return the actual sampling interval
it will be using (after the adjustments previously described).
The sampling algorithm must converge so that over time the
number of packets sampled approaches 1/Nth of the total number
of packets in the monitored flows.rw Integer32 .1.3.6.1.4.1.207.8.17.13.1.1.2 |
atiSflowSetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.14 |
atiSflowSetTableA table of the sFlow set function. SEQUENCE OF AtiSflowSetEntry .1.3.6.1.4.1.207.8.17.14.1 |
atiSflowSetEntryAttributes of an sFlow Set. AtiSflowSetEntry .1.3.6.1.4.1.207.8.17.14.1.1 |
atiSflowSetIndexIndex into sFlowSetTable.ro Integer32 .1.3.6.1.4.1.207.8.17.14.1.1.1 |
atiSflowSetAddressThe IP address of the sFlow collector.
If set to 0.0.0.0 not sFlow datagrams will be sent.ro IpAddress .1.3.6.1.4.1.207.8.17.14.1.1.2 |
atiSflowSetPortThe port for sFlow Sampler or Poller.ro Integer32 .1.3.6.1.4.1.207.8.17.14.1.1.3 |
atiSflowSetStatusThe set status.rw Enumeration .1.3.6.1.4.1.207.8.17.14.1.1.4 |
atiSflowEnableGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.15 |
atiSflowEnableTableA table of the sFlow enable function. SEQUENCE OF AtiSflowEnableEntry .1.3.6.1.4.1.207.8.17.15.1 |
atiSflowEnableEntryAttributes of an sFlow Enable. AtiSflowEnableEntry .1.3.6.1.4.1.207.8.17.15.1.1 |
atiSflowEnablePortIndex into sFlowEnableTable.ro Integer32 .1.3.6.1.4.1.207.8.17.15.1.1.1 |
atiSflowEnableStatusThe enable status.rw Enumeration .1.3.6.1.4.1.207.8.17.15.1.1.2 |
atiStkSwAQoSGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.17 |
atiAQosPortConfigurationTableatiAQosPortConfigurationTable SEQUENCE OF AtiAQosPortConfigurationEntry .1.3.6.1.4.1.207.8.17.17.1 |
atiAQosPortConfigurationEntry AtiAQosPortConfigurationEntry .1.3.6.1.4.1.207.8.17.17.1.1 |
atiAQosPortConfigurationPortIdIndex into atiAQosPortConfigurationTablero Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.1 |
atiAQosPortConfigurationStatusStatusrw Enumeration .1.3.6.1.4.1.207.8.17.17.1.1.2 |
atiAQosPortConfigurationDefaultQueueDefault queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.3 |
atiAQosPortConfigurationSchedularAndQueueWeightListSchedular and queue weight listrw DisplayString .1.3.6.1.4.1.207.8.17.17.1.1.4 |
atiAQosPortConfigurationWRREgressRateQ0WRR egress rate Queue 0rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.5 |
atiAQosPortConfigurationWRREgressRateQ1WRR egress rate Queue 1rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.6 |
atiAQosPortConfigurationWRREgressRateQ2WRR egress rate Queue 2rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.7 |
atiAQosPortConfigurationWRREgressRateQ3WRR egress rate Queue 3rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.8 |
atiAQosPortConfigurationWRREgressRateQ4WRR egress rate Queue 4rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.9 |
atiAQosPortConfigurationWRREgressRateQ5WRR egress rate Queue 5rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.10 |
atiAQosPortConfigurationWRREgressRateQ6WRR egress rate Queue 6rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.11 |
atiAQosPortConfigurationWRREgressRateQ7WRR egress rate Queue 7rw Integer32 .1.3.6.1.4.1.207.8.17.17.1.1.12 |
atiAQosCosQueueMapTableatiAQosCosQueueMapTable SEQUENCE OF AtiAQosCosQueueMapEntry .1.3.6.1.4.1.207.8.17.17.2 |
atiAQosCosQueueMapEntry AtiAQosCosQueueMapEntry .1.3.6.1.4.1.207.8.17.17.2.1 |
atiAQosCosQueueMapPortIdIndex into atiAQosCosQueueMapTablero Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.1 |
atiAQosCosQueueMapCos0QueueCos 0 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.2 |
atiAQosCosQueueMapCos1QueueCos 1 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.3 |
atiAQosCosQueueMapCos2QueueCos 2 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.4 |
atiAQosCosQueueMapCos3QueueCos 3 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.5 |
atiAQosCosQueueMapCos4QueueCos 4 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.6 |
atiAQosCosQueueMapCos5QueueCos 5 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.7 |
atiAQosCosQueueMapCos6QueueCos 6 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.8 |
atiAQosCosQueueMapCos7QueueCos 7 queuerw Integer32 .1.3.6.1.4.1.207.8.17.17.2.1.9 |
atiAQosCosQueueMapDefaultMapDefault maprw Enumeration .1.3.6.1.4.1.207.8.17.17.2.1.10 |
atiAQosDscpQueueMapTableatiAQosDscpQueueMapTable SEQUENCE OF AtiAQosDscpQueueMapEntry .1.3.6.1.4.1.207.8.17.17.3 |
atiAQosDscpQueueMapEntry AtiAQosDscpQueueMapEntry .1.3.6.1.4.1.207.8.17.17.3.1 |
atiAQosDscpQueueMapPortIdIndex into atiAQosDscpQueueMapTablero Integer32 .1.3.6.1.4.1.207.8.17.17.3.1.1 |
atiAQosDscpQueueMapQueue0Queue 0rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.2 |
atiAQosDscpQueueMapQueue1Queue 1rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.3 |
atiAQosDscpQueueMapQueue2Queue 2rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.4 |
atiAQosDscpQueueMapQueue3Queue 3rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.5 |
atiAQosDscpQueueMapQueue4Queue 4rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.6 |
atiAQosDscpQueueMapQueue5Queue 5rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.7 |
atiAQosDscpQueueMapQueue6Queue 6rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.8 |
atiAQosDscpQueueMapQueue7Queue 7rw DisplayString .1.3.6.1.4.1.207.8.17.17.3.1.9 |
atiAQosDscpQueueMapDefaultMapDefault maprw Enumeration .1.3.6.1.4.1.207.8.17.17.3.1.10 |
atiAQosAggregatePolicerTableatiAQosAggregatePolicerTable SEQUENCE OF AtiAQosAggregatePolicerEntry .1.3.6.1.4.1.207.8.17.17.4 |
atiAQosAggregatePolicerEntry AtiAQosAggregatePolicerEntry .1.3.6.1.4.1.207.8.17.17.4.1 |
atiAQosAggregatePolicerIndexIndex into atiAQosAggregatePolicerTablero Integer32 .1.3.6.1.4.1.207.8.17.17.4.1.1 |
atiAQosAggregatePolicerNameAggregate police namerw DisplayString .1.3.6.1.4.1.207.8.17.17.4.1.2 |
atiAQosAggregatePolicerRateRaterw Enumeration .1.3.6.1.4.1.207.8.17.17.4.1.3 |
atiAQosAggregatePolicerCIRkbpsCIR kbpsrw Integer32 .1.3.6.1.4.1.207.8.17.17.4.1.4 |
atiAQosAggregatePolicerCBSbCBS brw Integer32 .1.3.6.1.4.1.207.8.17.17.4.1.5 |
atiAQosAggregatePolicerPIRkbpsPIR kbpsrw Integer32 .1.3.6.1.4.1.207.8.17.17.4.1.6 |
atiAQosAggregatePolicerPBSbPBS brw Integer32 .1.3.6.1.4.1.207.8.17.17.4.1.7 |
atiAQosAggregatePolicerActionActionrw Enumeration .1.3.6.1.4.1.207.8.17.17.4.1.8 |
atiAQosInterfacePolicyTableatiAQosInterfacePolicyTable SEQUENCE OF AtiAQosInterfacePolicyEntry .1.3.6.1.4.1.207.8.17.17.5 |
atiAQosInterfacePolicyEntry AtiAQosInterfacePolicyEntry .1.3.6.1.4.1.207.8.17.17.5.1 |
atiAQosInterfacePolicyPortIdIndex into atiAQosInterfacePolicyTablero Integer32 .1.3.6.1.4.1.207.8.17.17.5.1.1 |
atiAQosInterfacePolicyMapNamePolicy map namerw DisplayString .1.3.6.1.4.1.207.8.17.17.5.1.2 |
atiAQosPolicyMapTableatiAQosPolicyMapTable SEQUENCE OF AtiAQosPolicyMapEntry .1.3.6.1.4.1.207.8.17.17.6 |
atiAQosPolicyMapEntry AtiAQosPolicyMapEntry .1.3.6.1.4.1.207.8.17.17.6.1 |
atiAQosPolicyMapIndexIndex into atiAQosPolicyMapTablero Integer32 .1.3.6.1.4.1.207.8.17.17.6.1.1 |
atiAQosPolicyMapPolicyNamePolicy namerw DisplayString .1.3.6.1.4.1.207.8.17.17.6.1.2 |
atiAQosPolicyMapClassNameClass namerw DisplayString .1.3.6.1.4.1.207.8.17.17.6.1.3 |
atiAQosPolicyMapDefaultActionAction of default class-maprw Enumeration .1.3.6.1.4.1.207.8.17.17.6.1.4 |
atiAQosPolicyMapCosActionCos actionrw Enumeration .1.3.6.1.4.1.207.8.17.17.6.1.5 |
atiAQosPolicyMapDscpActionDscp actionrw DisplayString .1.3.6.1.4.1.207.8.17.17.6.1.6 |
atiAQosPolicyMapIpNextHopActionIp next hop actionrw IpAddress .1.3.6.1.4.1.207.8.17.17.6.1.7 |
atiAQosPolicyMapQueueActionQueue actionrw Integer32 .1.3.6.1.4.1.207.8.17.17.6.1.8 |
atiAQosPolicyMapTrustActionTrust actionrw Enumeration .1.3.6.1.4.1.207.8.17.17.6.1.9 |
atiAQosPolicyMapPoliceAggregateActionPolice aggregate actionrw DisplayString .1.3.6.1.4.1.207.8.17.17.6.1.10 |
atiAQosPolicyMapStormActionStorm actionrw Enumeration .1.3.6.1.4.1.207.8.17.17.6.1.11 |
atiAQosPolicyMapStormDowntimeActionStorm downtime actionrw Integer32 .1.3.6.1.4.1.207.8.17.17.6.1.12 |
atiAQosPolicyMapStormRateActionStorm rate actionrw Integer32 .1.3.6.1.4.1.207.8.17.17.6.1.13 |
atiAQosPolicyMapStormWindowActionStorm window actionrw Integer32 .1.3.6.1.4.1.207.8.17.17.6.1.14 |
atiAQosClassMapTableatiAQosClassMapTable SEQUENCE OF AtiAQosClassMapEntry .1.3.6.1.4.1.207.8.17.17.7 |
atiAQosClassMapEntry AtiAQosClassMapEntry .1.3.6.1.4.1.207.8.17.17.7.1 |
atiAQosClassMapIndexIndex into atiAQosClassMapTablero Integer32 .1.3.6.1.4.1.207.8.17.17.7.1.1 |
atiAQosClassMapClassNameClass namerw DisplayString .1.3.6.1.4.1.207.8.17.17.7.1.2 |
atiAQosClassMapAccessGroupMatchAccess group matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.3 |
atiAQosClassMapCosMatchCos matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.4 |
atiAQosClassMapDscpMatchDscp matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.5 |
atiAQosClassMapInnerCosMatchInner cos matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.6 |
atiAQosClassMapInnerVlanMatchInner vlan matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.7 |
atiAQosClassMapIpPrecedenceMatchIp precedence vlan matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.8 |
atiAQosClassMapMacTypeMatchMac type matchrw Enumeration .1.3.6.1.4.1.207.8.17.17.7.1.9 |
atiAQosClassVlanMatchVlan matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.10 |
atiAQosClassTcpFlagsMatchTcp flags matchrw Enumeration .1.3.6.1.4.1.207.8.17.17.7.1.11 |
atiAQosClassL2FormatMatchL2 format matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.12 |
atiAQosClassL3ProtocolMatchL3 protocol matchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.17.7.1.13 |
atiStkSwAACLGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.18 |
atiStkSwAACLIpv4ConfigTableThis table contains a Access Control List (ACL) for Ipv4
addresses in the switch and their associated attributes. SEQUENCE OF AtiStkSwAACLIpv4ConfigEntry .1.3.6.1.4.1.207.8.17.18.1 |
atiStkSwAACLIpv4ConfigEntryThis object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch. AtiStkSwAACLIpv4ConfigEntry .1.3.6.1.4.1.207.8.17.18.1.1 |
atiStkSwAACLIdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.1 |
atiStkSwAACLStatusThis object specifies the status of the ACL ID.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.2 |
atiStkSwAACLNameThis object specifies the name of the ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.1.1.3 |
atiStkSwAACLActionThe action of the ACL entry either deny or permit or copy to mirror.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.4 |
atiStkSwAACLTrafficTypeThe Object specifies the traffic type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.5 |
atiStkSwAACLSrcTypeThe Object specifies the source type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.6 |
atiStkSwAACLSrcAddrThis object displays the IPv4 address of the source of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.18.1.1.7 |
atiStkSwAACLSrcMaskThis object displays the IPv4 mask of the source of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.18.1.1.8 |
atiStkSwAACLDestTypeThe Object specifies the destination type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.9 |
atiStkSwAACLDestAddrThis object displays the IPv4 address of the destination of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.18.1.1.10 |
atiStkSwAACLDestMaskThis object displays the IPv4 mask of the destination of an ACL.rw IpAddress .1.3.6.1.4.1.207.8.17.18.1.1.11 |
atiStkSwAACLVlanIdThis object specifies the Vlan ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.12 |
atiStkSwAACLProtocolThis object specifies the Protocol ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.13 |
atiStkSwAACLICMPTypeThis object specifies the ICMP Type of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.14 |
atiStkSwAACLUDPTCPSrcPortThe Object specifies the comparision of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.15 |
atiStkSwAACLSrcPort1This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.16 |
atiStkSwAACLSrcPort2This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.17 |
atiStkSwAACLUDPTCPDestPortThe Object specifies the comparision of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.18.1.1.18 |
atiStkSwAACLDestPort1This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.19 |
atiStkSwAACLDestPort2This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.1.1.20 |
atiStkSwAACLTimeRangeThis object specifies the time range ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.1.1.21 |
atiStkSwAACLIpv6ConfigTableThis table contains a Access Control List (ACL) for Ipv4
addresses in the switch and their associated attributes. SEQUENCE OF AtiStkSwAACLIpv6ConfigEntry .1.3.6.1.4.1.207.8.17.18.2 |
atiStkSwAACLIpv6ConfigEntryThis object specifies an entry in 'atiStkSwACLConfigTable'
that describes the ACL in the switch. AtiStkSwAACLIpv6ConfigEntry .1.3.6.1.4.1.207.8.17.18.2.1 |
atiStkSwAACLv6IdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.1 |
atiStkSwAACLv6StatusThis object specifies the status of the ACL ID.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.2 |
atiStkSwAACLv6NameThis object specifies the name of the ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.2.1.3 |
atiStkSwAACLv6ActionThe action of the ACL entry either deny or permit or copy to mirror.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.4 |
atiStkSwAACLv6TrafficTypeThe Object specifies the traffic type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.5 |
atiStkSwAACLv6SrcTypeThe Object specifies the source type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.6 |
atiStkSwAACLv6SrcAddrThis object displays the IPv6 address of the source of an ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.2.1.7 |
atiStkSwAACLv6SrcMaskThis object displays the IPv6 mask of the source of an ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.2.1.8 |
atiStkSwAACLv6DestTypeThe Object specifies the destination type of the ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.9 |
atiStkSwAACLv6DestAddrThis object displays the IPv6 address of the destination of an ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.2.1.10 |
atiStkSwAACLv6DestMaskThis object displays the IPv6 mask of the destination of an ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.2.1.11 |
atiStkSwAACLv6VlanIdThis object specifies the Vlan ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.12 |
atiStkSwAACLv6ProtocolThis object specifies the Protocol ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.13 |
atiStkSwAACLv6ICMPTypeThis object specifies the ICMP Type of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.14 |
atiStkSwAACLv6UDPTCPSrcPortThe Object specifies the comparision of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.15 |
atiStkSwAACLv6SrcPort1This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.16 |
atiStkSwAACLv6SrcPort2This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.17 |
atiStkSwAACLv6UDPTCPDestPortThe Object specifies the comparision of the port.rw Enumeration .1.3.6.1.4.1.207.8.17.18.2.1.18 |
atiStkSwAACLv6DestPort1This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.19 |
atiStkSwAACLv6DestPort2This object specifies the port.rw Integer32 .1.3.6.1.4.1.207.8.17.18.2.1.20 |
atiStkSwAACLv6TimeRangeThis object specifies the time range ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.2.1.21 |
atiStkSwAACLInterfaceConfigTableThis table contains a Access Control List (ACL) in the
switch and their associated attributes. SEQUENCE OF AtiStkSwAACLInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.18.3 |
atiStkSwAACLInterfaceConfigEntryThis object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch. AtiStkSwAACLInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.18.3.1 |
atiStkSwAACLInterfaceModuleIdThis object specifies the Module ID of the system.ro Integer32 .1.3.6.1.4.1.207.8.17.18.3.1.1 |
atiStkSwAACLInterfacePortIdThis object specifies the Port ID of the system.ro Integer32 .1.3.6.1.4.1.207.8.17.18.3.1.2 |
atiStkSwAACLInterfacaeACLNameThis object specifies the created ACL ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.3.1.3 |
atiStkSwAACLInterfacaeAddACLNameThis object specifies the ACL ID to Add.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.3.1.4 |
atiStkSwAACLInterfacaeRemoveACLNameThis object specifies the ACL ID to Remove.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.3.1.5 |
atiStkSwAACLTimeRangeConfigTableThis table contains a time range Access Control List (ACL) in the
switch and their associated attributes. SEQUENCE OF AtiStkSwAACLTimeRangeConfigEntry .1.3.6.1.4.1.207.8.17.18.4 |
atiStkSwAACLTimeRangeConfigEntryThis object specifies an entry in 'atiStkSwAACLTimeRangeAbsoluteConfigTable'
that describes the ACL in the switch. AtiStkSwAACLTimeRangeConfigEntry .1.3.6.1.4.1.207.8.17.18.4.1 |
atiStkSwAACLTimeRangeEntryThis object specifies the entry of the time range ACL.ro Integer32 .1.3.6.1.4.1.207.8.17.18.4.1.1 |
atiStkSwAACLTimeRangeNameThis object specifies the Name of the time range ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.4.1.2 |
atiStkSwAACLTimeRangeTypeThis object specifies the type of the time range ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.4.1.3 |
atiStkSwAACLTimeRangeAbsoluteStartTimeThis object specifies the start time of the time range ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.4.1.4 |
atiStkSwAACLTimeRangeAbsoluteEndTimeThis object specifies the end time of the time range ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.4.1.5 |
atiStkSwAACLTimeRangePeriodicFrequencyThis object specifies the Frequency of days for periodic time range ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.4.1.6 |
atiStkSwAACLTimeRangePeriodicStartDayThis object specifies the start day for periodic time range ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.4.1.7 |
atiStkSwAACLTimeRangePeriodicEndDayThis object specifies the end day for periodic time range ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.4.1.8 |
atiStkSwAACLTimeRangePeriodicStartTimeThis object specifies the start time of the periodic time range ACL.rw DisplayString -- .1.3.6.1.4.1.207.8.17.18.4.1.9 |
atiStkSwAACLTimeRangePeriodicEndTimeThis object specifies the end time of the periodic time range ACL.rw DisplayString -- .1.3.6.1.4.1.207.8.17.18.4.1.10 |
atiStkSwAACLTimeRangeStatusThis object specifies the status of the time range ACL.rw Enumeration .1.3.6.1.4.1.207.8.17.18.4.1.11 |
atiStkSwAACLIPV4MACConfigTableThis table contains a Access Control List (ACL) in the
switch and their associated attributes. SEQUENCE OF AtiStkSwAACLIPV4MACConfigEntry .1.3.6.1.4.1.207.8.17.18.5 |
atiStkSwAACLIPV4MACConfigEntryThis object specifies an entry in 'atiStkSwACLMACConfigTable'
that describes the ACL in the switch. AtiStkSwAACLIPV4MACConfigEntry .1.3.6.1.4.1.207.8.17.18.5.1 |
atiStkSwAACLIPV4MACIdThis object specifies the ID of the ACL table.ro Integer32 .1.3.6.1.4.1.207.8.17.18.5.1.1 |
atiStkSwAACLIPV4MACNameThis object specifies the name of the ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.5.1.2 |
atiStkSwAACLIPV4MACStatusThis object specifies the status of the ACL ID.rw Enumeration .1.3.6.1.4.1.207.8.17.18.5.1.3 |
atiStkSwAACLIPV4MACActionThe action of the ACL entry either deny or permit or copy to mirror.rw Enumeration .1.3.6.1.4.1.207.8.17.18.5.1.4 |
atiStkSwAACLIPV4MACSrcThis object specifies the source type.rw Enumeration .1.3.6.1.4.1.207.8.17.18.5.1.5 |
atiStkSwAACLIPV4MACDestThis object specifies destination type.rw Enumeration .1.3.6.1.4.1.207.8.17.18.5.1.6 |
atiStkSwAACLIPV4MACSrcMacThe MAC address Mask used by this source.rw DisplayString .1.3.6.1.4.1.207.8.17.18.5.1.7 |
atiStkSwAACLIPV4MACSrcMacMaskThe MAC address Mask used by this source .rw DisplayString .1.3.6.1.4.1.207.8.17.18.5.1.8 |
atiStkSwAACLIPV4MACDestMacThe MAC address used by this destination.rw DisplayString .1.3.6.1.4.1.207.8.17.18.5.1.9 |
atiStkSwAACLIPV4MACDestMacMaskThe MAC address Mask used by this destination.rw DisplayString .1.3.6.1.4.1.207.8.17.18.5.1.10 |
atiStkSwAACLIPV4MACVlanIdThis object specifies the Vlan ID of the ACL table.rw Integer32 .1.3.6.1.4.1.207.8.17.18.5.1.11 |
atiStkSwAACLIPV4MACTimeRangeThis object specifies the time range ACL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.18.5.1.12 |
atiStkSwMSTPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.19 |
atiStkSwMSTPMstConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.19.1 |
atiStkSwMSTPMstRegionSet the Region name for MSTP.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.19.1.1 |
atiStkSwMSTPMstRevisionSet the revision number for MSTP.rw Integer32 .1.3.6.1.4.1.207.8.17.19.1.2 |
atiStkSwMSTPMstInstanceConfigTableThis table contains a mst-config Instance associated attributes. SEQUENCE OF AtiStkSwMSTPMstInstanceConfigEntry .1.3.6.1.4.1.207.8.17.19.2 |
atiStkSwMSTPMstInstanceConfigEntryThis object specifies an entry in 'atiStkSwMSTPMstInstanceConfigTable'
that describes the mst config in the switch. AtiStkSwMSTPMstInstanceConfigEntry .1.3.6.1.4.1.207.8.17.19.2.1 |
atiStkSwMSTPMstInstanceIdThis object specifies the Instance ID for MSTP.ro Integer32 .1.3.6.1.4.1.207.8.17.19.2.1.1 |
atiStkSwMSTPMstInstanceVlanThis object associates the Instance ID with vlanId for MSTP.rw Integer32 .1.3.6.1.4.1.207.8.17.19.2.1.2 |
atiStkSwMSTPMstInstancePriorityThis object associates the Instance ID with priority for MSTP.rw Integer32 .1.3.6.1.4.1.207.8.17.19.2.1.3 |
atiStkSwMSTPMstInterfaceConfigTableThis table contains a mstp interface level config. SEQUENCE OF AtiStkSwMSTPMstInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.19.3 |
atiStkSwMSTPMstInterfaceConfigEntryThis object specifies an entry in 'atiStkSwMSTPMstInterfaceConfigTable'
that describes the mstp interface levl config in the switch. AtiStkSwMSTPMstInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.19.3.1 |
atiStkSwMSTPMstInterfaceModuleIdThis object specifies the module ID for MSTP.ro Integer32 .1.3.6.1.4.1.207.8.17.19.3.1.1 |
atiStkSwMSTPMstInterfacePortIdThis object specifies the port ID for MSTP.ro Integer32 .1.3.6.1.4.1.207.8.17.19.3.1.2 |
atiStkSwMSTPMstInterfaceInstanceIdThis object associates the port ID with instance id for MSTP.rw Integer32 .1.3.6.1.4.1.207.8.17.19.3.1.3 |
atiStkSwMSTPMstInterfacePathCostThis object associates the path cost with instance id for MSTP.rw Integer32 .1.3.6.1.4.1.207.8.17.19.3.1.4 |
atiStkSwMSTPMstInterfacePriorityThis object associates the priority with instance id for MSTP.rw Integer32 .1.3.6.1.4.1.207.8.17.19.3.1.5 |
atiStkSwMVRGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.20 |
atiStkSwMVRConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.20.1 |
atiStkSwMVRStatusSet the status for MVR.rw Enumeration .1.3.6.1.4.1.207.8.17.20.1.1 |
atiStkSwMVRVlanSet the group IP address for MVR.rw Integer32 .1.3.6.1.4.1.207.8.17.20.1.3 |
atiStkSwMVRInterfaceConfigTableThis table contains a MVR interface level attributes. SEQUENCE OF AtiStkSwMVRInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.20.2 |
atiStkSwMVRInterfaceConfigEntryThis object specifies an entry in 'atiStkSwMVRInterfaceConfigTable'
that describes the MVR config in switch. AtiStkSwMVRInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.20.2.1 |
atiStkSwMVRInterfaceIndexThis object specifies the index for MVR.ro Integer32 .1.3.6.1.4.1.207.8.17.20.2.1.1 |
atiStkSwMVRInterfacePortIdThis object specifies the port ID for MVR.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.20.2.1.2 |
atiStkSwMVRInterfaceTypeThis object associates the type with port Id for MSTP.rw Enumeration .1.3.6.1.4.1.207.8.17.20.2.1.3 |
atiStkSwMVRConfigGroupIpTableThis table contains a MVR Group ip attributes. SEQUENCE OF AtiStkSwMVRConfigGroupIpEntry .1.3.6.1.4.1.207.8.17.20.3 |
atiStkSwMVRConfigGroupIpEntryThis object specifies an entry in 'atiStkSwMVRConfigGroupIpTable'
that describes the MVR config Group ip in switch. AtiStkSwMVRConfigGroupIpEntry .1.3.6.1.4.1.207.8.17.20.3.1 |
atiStkSwMVRGroupIpIndexThis object specifies the index for MVR Group ip.ro Integer32 .1.3.6.1.4.1.207.8.17.20.3.1.1 |
atiStkSwMVRGroupIpThis object specifies the group ip for MVR.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.20.3.1.2 |
atiStkSwPSTACKGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.21 |
atiStkSwPSTACKConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.21.1 |
atiStkSwPSTACKNoofModulesSet the Number of modules for PStack.ro Integer32 .1.3.6.1.4.1.207.8.17.21.1.1 |
atiStkSwPSTACKTopologySet the Topology for PStack.ro Enumeration .1.3.6.1.4.1.207.8.17.21.1.2 |
atiStkSwPSTACKLclModIDSet the Local Module ID for PStack.ro Integer32 .1.3.6.1.4.1.207.8.17.21.1.3 |
atiStkSwPSTACKLclMacAddSet the Mac Address for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.4 |
atiStkSwPSTACKMasterModIdSet the Master Module ID for PStack.ro Integer32 .1.3.6.1.4.1.207.8.17.21.1.5 |
atiStkSwPSTACKMasterMacAddSet the Master Mac Address for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.6 |
atiStkSwPSTACKSlaveMacAdd1Set the Slave Mac Address 1 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.7 |
atiStkSwPSTACKSlaveMacAdd2Set the Slave Mac Address 2 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.8 |
atiStkSwPSTACKSlaveMacAdd3Set the Slave Mac Address 3 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.9 |
atiStkSwPSTACKSlaveMacAdd4Set the Slave Mac Address 4 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.10 |
atiStkSwPSTACKSlaveMacAdd5Set the Slave Mac Address 5 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.11 |
atiStkSwPSTACKSlaveMacAdd6Set the Slave Mac Address 6 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.12 |
atiStkSwPSTACKSlaveMacAdd7Set the Slave Mac Address 7 for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.1.13 |
atiStkSwPSTACKInterfaceConfigTableThis table contains a PStack interface level attributes. SEQUENCE OF AtiStkSwPSTACKInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.21.2 |
atiStkSwPSTACKInterfaceConfigEntryThis object specifies an entry in 'atiStkSwPStackInterfaceConfigTable'
that describes the PStack config in switch. AtiStkSwPSTACKInterfaceConfigEntry .1.3.6.1.4.1.207.8.17.21.2.1 |
atiStkSwPSTACKInterfaceDeviceIdThis object specifies the Device ID for PStack.ro Integer32 .1.3.6.1.4.1.207.8.17.21.2.1.1 |
atiStkSwPSTACKInterfaceMacAddressThis object associates the Mac Address with Device Id for PStack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.2.1.2 |
atiStkSwPSTACKInterfaceSwVersionThis object associates the Software Version with Device Id for PStack.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.2.1.3 |
atiStkSwPSTACKInterfaceModelThis object associates the Model type with Device Id for PStack.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.21.2.1.4 |
atiStkSwPSTACKDeviceIDConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.21.3 |
atiStkSwPSTACKDeviceIDSet the Device ID for PSTACK.rw Integer32 .1.3.6.1.4.1.207.8.17.21.3.1 |
atiStkSwPSTACKRebootConfigTable OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.21.4 |
atiStkSwPSTACKRebootDeviceIDSet Reboot for PSTACK.rw Enumeration .1.3.6.1.4.1.207.8.17.21.4.1 |
atiStkSwDhcpSvrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.22 |
atiStkSwDhcpPoolTableThis table contains a list of Dhcp Pool. SEQUENCE OF AtiStkSwDhcpPoolEntry .1.3.6.1.4.1.207.8.17.22.1 |
atiStkSwDhcpPoolEntryThis object specifies an entry in 'atiStkSwDhcpPoolTable'
that describes a DHCP Pool configured on the switch. AtiStkSwDhcpPoolEntry .1.3.6.1.4.1.207.8.17.22.1.1 |
atiDhcpPoolIdThe Pool ID.ro Integer32 .1.3.6.1.4.1.207.8.17.22.1.1.1 |
atiDhcpPoolNameThe atiDhcpPoolName indicates Pool Name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.1.1.2 |
atiDhcpPoolNetworkPool Networkrw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.3 |
atiDhcpPoolNetmaskatiDhcpPoolNetmaskrw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.4 |
atiDhcpPoolSubnetmaskatiDhcpPoolSubnetmask.rw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.5 |
atiDhcpPoolRangeListRange list of this pool.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.1.1.6 |
atiDhcpPoolExpireTimeThe total expire timerw Integer32 .1.3.6.1.4.1.207.8.17.22.1.1.7 |
atiDhcpPoolRouterListatiDhcpPoolRouterListro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.1.1.8 |
atiDhcpPoolDNSSvrListatiDhcpPoolDNSSvrListro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.1.1.9 |
atiDhcpPoolDomainNameatiDhcpPoolDomainNamerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.1.1.10 |
atiDhcpPoolIpAddIp address to be added to rangerw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.11 |
atiDhcpPoolIpDeleteIp address to be deleted from rangerw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.12 |
atiDhcpPoolRouterAddThe router to be added to router listrw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.13 |
atiDhcpPoolRouterDeleteThe router to be deleted from router listrw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.14 |
atiDhcpPoolDNSAddThe DNS to be added to DNS listrw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.15 |
atiDhcpPoolDNSDeleteThe DNS to be deleted from DNS listrw IpAddress .1.3.6.1.4.1.207.8.17.22.1.1.16 |
atiStkSwDhcpBindingTableThis table contains a list of Dhcp Binding configured on the switch. SEQUENCE OF AtiStkSwDhcpBindingEntry .1.3.6.1.4.1.207.8.17.22.2 |
atiStkSwDhcpBindingEntryThis object specifies an entry in 'atiStkSwDhcpBindingTable'
that describes a DHCP Binding configured on the switch. AtiStkSwDhcpBindingEntry .1.3.6.1.4.1.207.8.17.22.2.1 |
atiDhcpBindingIdThe atiDhcpBindingId is the Binding Idro Integer32 .1.3.6.1.4.1.207.8.17.22.2.1.1 |
atiDhcpClientMacAddressThe Client Mac Address is the Client Idro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.2.1.2 |
atiDhcpPortNumberThe Port Number indicates which port is offering this ip address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.2.1.3 |
atiDhcpIpAddressswitch offers ip address to clientro IpAddress .1.3.6.1.4.1.207.8.17.22.2.1.4 |
atiDhcpExpireTimeThe ip is valid within this Expire time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.17.22.2.1.5 |
atiStkSwDhcpStatisticTable OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.17.22.3 |
atiInDiscoverThe atiInDiscover reflects the counter of Dhcp Discover input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.1 |
atiInDhcpRequestThe atiInDhcpDiscover reflects the counter of Dhcp Request input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.2 |
atiInDeclineThe atiInDecline reflects the counter of Dhcp Decline input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.3 |
atiInReleaseThe atiInRelease reflects the counter of Dhcp Release input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.4 |
atiInInformThe atiInInform reflects the counter of Dhcp Inform input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.5 |
atiInBootRequestThe atiInBootRequest reflects the counter of Dhcp Boot Request input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.6 |
atiInLeaseQueryThe atiInLeaseQuery reflects the counter of Dhcp Lease Query input frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.7 |
atiOutDhcpOfferThe atiOutDhcpOffer reflects the counter of Dhcp Offer Output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.8 |
atiOutDhcpAckThe atiOutDhcpAck reflects the counter of Dhcp Ack output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.9 |
atiOutDhcpNakThe atiOutDhcpNak reflects the counter of Dhcp Nak output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.10 |
atiOutLeaseUnknownThe atiOutLeaseUnknow reflects the counter of Dhcp Lease Unknown output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.11 |
atiOutLeaseActiveThe atiOutLeaseActive reflects the counter of Dhcp Lease Active output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.12 |
atiOutLeaseUnassignedThe atiOutLeaseUnassigned reflects the counter of Dhcp Lease Unassigned output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.13 |
atiOutBootReplyThe atiOutBootReply reflects the counter of Dhcp Boot Reply output frames.ro Integer32 .1.3.6.1.4.1.207.8.17.22.3.14 |