Home/Catalog/SWITCH-ATM-MIB

SWITCH-ATM-MIB

The MIB module for ATM support. This module is designed with the assumption that only one virtual path identifier (VPI) may be assigned and is usually determined by the underlying software implementation. The VPI is never used as an index in any table in this module.
Main OID:
switchAtmMib.1.3.6.1.4.1.207.8.9.2.1.1
246
Objects
Active
Status
3
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
TELESYN-ATI-TC

Objects

246 total
Object Name
switchAtmMibThe MIB module for ATM support. This module is designed with the assumption that only one virtual path identifier (VPI) may be assigned and is usually determined by the underlying software implementation. The VPI is never used as an index in any table in this module.
MODULE-IDENTITY
.1.3.6.1.4.1.207.8.9.2.1.1
atmxPortGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.1
atmxPortTableA table of port layer status and parameter information for the UNI's physical interface.
SEQUENCE OF AtmxPortEntry
.1.3.6.1.4.1.207.8.9.2.1.1.1.1
atmxPortEntryAn entry in the table, containing information about the physical layer of a UNI interface.
AtmxPortEntry
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1
atmxPortIndexA unique value which identifies this atm submodule port.
AtmPortIndex
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.1
atmxPortDescriptionA description for this atm port.rw
DisplayString
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.2
atmxPortTransmissionTypeThe transmission type of this port. For example, for a port using the Sonet STS-3c physical layer at 155.52 Mbs, this object would have the value 'sonetSTS3c'.ro
AtmTransmissionTypes
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.3
atmxPortMediaTypeThe type of media being used on this port. For example for a port using coaxial cable, the object would have the value 'coaxCable'.ro
AtmMediaTypes
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.4
atmxPortOperStatusThe operational state (i.e., actual) of this port. The ILMI should not alarm on a physical interface when the value of this object is 'outOfService'. This capability is useful if the equipment is to be disconnected or for troubleshooting purposes. A value of 'loopBack' indicates that loopback is in place.ro
AtmOperStatus
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.5
atmxPortMaxVCCsThe maximum number of VCCs supported on this UNI.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.6
atmxPortMaxVciBitsThe number of active VCI bits on this interface.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.7
atmxPortAddressThe ATM address assigned to this port. The value of this attribute is normally set via the ILMI. If the ILMI Address registration mib, ATM-FORUM-ADDR-REG, is supported and the the value of atmxPortIlmiStatus is 'up' than atmxPortAddress should have a MAX-ACCESS of read-only.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.8
atmxPortSignalingVersionVersion of the ATM forum UNI Signaling.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.9
atmxPortSignalingVciSignaling Vci. ATM Forum has defined VPI/VCI as VPI 0, VCI 5 for signaling.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.10
atmxPortILMIVciILMI Vci. ATM Forum has defined the VPI 0, VCI 16 for ILMI.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.11
atmxPortEnableIlmiILMI Enable.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.12
atmxPortEnableIlmiPollILMI Poll Enable.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.13
atmxPortEnablePlScramblePayload Scrambling Enable.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.14
atmxPortClockATM Port clock mode.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.15
atmxPortMacAddressATM Port MAC Address.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.16
atmxPortAdaptorRamSizeSegmentation and reassembly memory size in bytes.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.17
atmxPortIlmiStatusILMI status.ro
AtmConnectionOperStatusCodes
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.18
atmxPortSignalingStatusSignaling Status.ro
AtmConnectionOperStatusCodes
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.19
atmxPortSignalingModeIf this has the value 'pvc' then signaling, ILMI and ILMI polling will be automatically disabled.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.1.1.1.20
atmxLecGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.2
atmxLecTableA table of LEC status and parameter information.
SEQUENCE OF AtmxLecEntry
.1.3.6.1.4.1.207.8.9.2.1.1.2.1
atmxLecEntryAn entry in the table, containing information about the indicated LEC.
AtmxLecEntry
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1
atmxLecIndexA unique value which identifies this LEC entry.
AtmLecIndex
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.1
atmxLecDescriptionA description for this LEC.rw
DisplayString
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.2
atmxElanNameA Name for the ELAN.rw
DisplayString
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.3
atmxLecConfigModeConfiguration Mode for this LEC.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.4
atmxLecServerAddressATM Address of the LE Configuration Server if the configuration mode is auto; else, the LE Server ATM Address.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.5
atmxLecUnicastMacAddressThe Local Unicast MAC address for this LEC. This is now obsolete because the information can be obtained from the vport entry identified by atmxLecVPortNumber.roobsolete
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.6
atmxLecMaxUnknownFrameCountMaximum number of frames to the BUS for a given unicast LAN destination within the Maximum unknown Frame time.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.7
atmxLecMaxArpRetryCountMaximum number of times LE_ARP_REQUEST will be retried for a given frame's LAN destination.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.8
atmxLecArpRespTimeMaximum time in seconds that the LEC expects an LE_ARP_REQUEST/LE_ARP_RESPONSE cycle to take.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.9
atmxLecMaxUnknownFrameTimeTime period in seconds for the maximum number of frames that can be sent to the BUS for a given LAN destination.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.10
atmxLecControlTimeoutTime out period in seconds for timing out most request response control frame interations.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.11
atmxLecVccTimeoutMaximum in-active time period in seconds a data direct VCC will be active before being released. A value of 0 indicates that it will never be release.rw
Unsigned32
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.12
atmxLecAgeingTimeMaximum time in seconds that an LE client will maintain an entry in its LE-ARP cache in the absence of verification.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.13
atmxLecFlushTimeoutTime limit in seconds to wait to receive an LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has been sent before taking recovery action.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.14
atmxLecVPortNumberThe Virtual port number with which this LEC is associated. If the value of this object is 0, then no virtual port has been assigned and the LEC is not active.rodeprecated
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.15
atmxLecProtocolStateThis object contains the LAN emulation protocol state.ro
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.16
atmxLecRowStatusThis object is used to create and delete entries. Only the values 'active', 'createAndGo', and 'delete are supported.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.17
atmxLecIfIndexThis object contains the ifIndex of the corresponding entry in the ifTable. If no such entry exists or unknown then value of this object is 0.ro
IfIndexOrZero
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.18
atmxLecIdA value assigned by the LAN Emulation Service (LES) for the LEC identified by atmLecIndex. The value 0 indicates the LES has not assigned a value.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.19
atmxLecControlDirectVccThe VCC assigned for the Control Direct connection. The value 0 indicates the VCC is not set.ro
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.20
atmxLecControlDistributeVccThe VCC assigned for the Control Distribute connection. The value 0 indicates the VCC is not set.ro
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.21
atmxLecMulticastSendVccThe VCC assigned for Multicast send. The value 0 indicates the VCC is not set.ro
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.22
atmxLecMulticastForwardVccThe VCC assigned for multicast forwarding. The value 0 indicates the VCC is not set.ro
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.23
atmxLecVlanNumberThe virtual LAN number to which this LEC is attached. This object is required for row creation and the value of this object must correspond to an existing vLanNumber object in the 'SWITCH-VLAN-MIB.vLanTable'. After a successful row creation, this value may change as a result of moving the virtual port, atmxLecIfIndex, to a different Vlan.rw
AtmxVlanRange
.1.3.6.1.4.1.207.8.9.2.1.1.2.1.1.24
atmxCipGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.3
atmxCipTableA table of CIP status and parameter information.
SEQUENCE OF AtmxCipEntry
.1.3.6.1.4.1.207.8.9.2.1.1.3.1
atmxCipEntryAn entry in the table, containing information about the indicated CIP.
AtmxCipEntry
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1
atmxCipIndexA unique value which identifies this CIP entry.
AtmCipIndex
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.1
atmxCipDescriptionA description for this CIP.rw
DisplayString
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.2
atmxCipIPAddressThe IP address associated with this CIP entity.rw
IpAddress
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.3
atmxCipIPSubnetMaskThe IP subnet mask associated with this CIP entity.rw
IpAddress
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.4
atmxCipConnectionTypeThe connection type of this CIP. If during row creation the value of this object is 'pvc', then at least one entry in the atmxCipVciTable is required before atmxCipRowStatus can be set to 'active'. If during row creation the value is 'svc' then atmxCipServerAtmAddress must be set before atmxCipRowStatus can be set to 'active'.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.5
atmxCipVciThe virtual channel identifier associated with this CIP, if PVC.rwobsolete
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.6
atmxCipServerAtmAddressATM Address of the ARP server for the logical IP subnet, to which this CIP belongs. This object is required if atmxCipConnectionType is 'svc'.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.7
atmxCipMtuSizeThe maximum size of the transmit or receive SDU size of all connections associated with this CIP entity.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.8
atmxCipIfIndexThis value of this object identifies the corresponding entry in the ifTable. If this object has the value of 0 then there is no corresponding entry in the ifTable.ro
IfIndexOrZero
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.9
atmxCipProtocolStateThe state of the CIP Protocol.ro
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.10
atmxCipAdmStatusThe administrative status of this CIP instance.rw
AtmAdminStatus
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.11
atmxCipOperStatusThe operational status of this CIP instance.ro
AtmOperStatus
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.12
atmxCipRowStatusThis object is used to create and delete atmxCipEntry. To create of a logical row, set this object to 'createAndWait'. Before this object can be set to 'active', the objects atmxCipIPAddress, atmxCipIPSubnetMask, atmxCipConnectionType must be set to the appropriate values and at least one entry must be created in the atmxCipVciTable with the same atmxCipIndex value as used with this object instance. When this object is set to 'active', the logical rows in atmxCipVciTable with the same atmxCipIndex value will also be set to 'active'. If this object is set to 'delete', the logical rows in atmxCipVciTable with the same atmxCipIndex value will also be deleted.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.13
atmxCipRipModeIf the value of this object is 'silent', RIP daemon processes received routing packets and does NOT send routing packets over the interface identified by atmxCipIfIndex. With a value of 'active', RIP sends and receives routing packets. With a value of 'deaf' RIP sends routing packets and does not process recieved packets. With a value of 'inactive' RIP deamon does not send nor receive routing packets.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.3.1.1.14
atmxCipVciTableA table which contains VCIs associated with each CIP.
SEQUENCE OF AtmxCipVciEntry
.1.3.6.1.4.1.207.8.9.2.1.1.3.2
atmxCipVciEntryAn entry in the table, identifying each VCI for a CIP.
AtmxCipVciEntry
.1.3.6.1.4.1.207.8.9.2.1.1.3.2.1
atmxCipVciIdThe virtual channel identifier associated with this CIP.
AtmClientVci
.1.3.6.1.4.1.207.8.9.2.1.1.3.2.1.1
atmxCipVciRowStatusThis object is used to create and delete entries in the atmxCipVciTable. An object instance of this object corresponds to an object instance of atmxCipRowStatus if both objects have the same for atmxCipIndex index value. There may be multiple instances of this object which correspond to the same instance of atmxCipRowStatus. To create a conceptual row in this table and the corresponding object instance atmxCipRowStatus does not exist or has the value 'notReady', the value for atmxCipVciRowStatus in an SNMP Set operation can be only 'createAndWait'. Under these conditions, atmxCipVciRowStatus cannot be set to 'active' but transitions to 'active' as a side effect of an SNMP set operation changing atmxCipRowStatus to 'active'. At least one corresponding instance of atmxCipVciRowStatus must exist before atmxCipRowStatus can transition to 'active'. To create a conceptual row in this table and the corresponding object instance atmxCipRowStatus exists with the value 'active' then the value for atmxCipVciRowStatus may be 'createAndWait' or 'createAndGo'. An SNMP Set operation may not set the value of this object to 'active' unless the the corresponde atmxCipRowStatus has the value 'active'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.3.2.1.2
atmxLayerStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.4
atmxLayerStatsTableA table of ATM layer statistics information.
SEQUENCE OF AtmxLayerStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.4.1
atmxLayerStatsEntryAn entry in the table, containing information about the ATM layer statistics.
AtmxLayerStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1
atmxLayerStatsTxCellsThe total number of successfully transmitted cells.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1.2
atmxLayerStatsRxCellsThe total number of successfully received cells.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1.3
atmxLayerStatsTxCellDiscardsThe total number of transmit cells that are discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1.4
atmxLayerStatsRxCellDiscardsThe total number of receive cells that are discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1.5
atmxLayerStatsClearWhen this attribute is set to 'clearStats', the counters for this logical row are reset to 0 and atmxLayerStatsClearTime is reset to 0.rw
AtmClearStats
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1.6
atmxLayerStatsClearTimeAmount of time in seconds that has elapsed since the counters have been cleared.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.4.1.1.7
aal5LayerStatsTableA table of AAL5 layer statistics information.
SEQUENCE OF Aal5LayerStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.4.2
aal5LayerStatsEntryAn entry in the table, containing information about the AAL5 layer statistics.
Aal5LayerStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1
aal5LayerTxOctetsThe total number of successfully transmitted octets for all AAL5 connections.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.2
aal5LayerTxCellsThe total number of successfully transmitted cells for all AAL5 connections.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.3
aal5LayerTxSDUsThe total number of successfully transmitted service data units for all AAL5 connections.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.4
aal5LayerTxSDUDiscardsThe total number of transmit SDUs discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.5
aal5LayerTxErrorsThe total number of transmit SDUs that could not be transmitted due to errors.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.6
aal5LayerRxOctetsThe total number of successfully received octets for all AAL5 connections.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.7
aal5LayerRxCellsThe total number of successfully received cells for all AAL5 connections.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.8
aal5LayerRxSDUsThe total number of successfully received service data units for all AAL5 connections.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.9
aal5LayerRxSDUDiscardsThe total number of received SDUs discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.10
aal5LayerRxErrorsThe total number of errored SDUs that received.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.11
aal5LayerRxSarTimeoutsThe total number of partially re-assembled SDUs that were discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.12
aal5LayerRxCrcErrorsThe total number of SDUs that were received with CRC errors.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.13
aal5LayerRxSDUInvalidSzThe total number of SDUs discarded because their size exceeded the max SDU size.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.14
aal5LayerClearStatsWhen this attribute is set to 'clearStats', the counters for this logical row are reset to 0 and aal5LayerStatsClearTime is reset to 0.rw
AtmClearStats
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.15
aal5LayerStatsClearTimeAmount of time in seconds that has elapsed since the counters have been reset.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.4.2.1.16
atmxVccStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.5
atmxVccStatsTableA table of ATM virtual channel connection statistics information.
SEQUENCE OF AtmxVccStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.5.1
atmxVccStatsEntryAn entry in the table, containing information about the ATM virtual channel connection statistics.
AtmxVccStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1
atmxVccStatsTxSDUsThe total number of transmitted SDU's on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.3
atmxVccStatsTxCellsThe total number of transmitted cells on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.4
atmxVccStatsTxOctetsThe total number of transmitted octets on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.5
atmxVccStatsRxSDUsThe total number of received SDU's on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.6
atmxVccStatsRxCellsThe total number of received cells on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.7
atmxVccStatsRxOctetsThe total number of received octets on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.8
atmxVccStatsTxSDUDiscardsThe total number of transmit SDUs discarded on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.9
atmxVccStatsTxErrorsThe total number of transmit SDU errors on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.10
atmxVccStatsRxSDUDiscardsThe total number of receive SDU's discarded on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.11
atmxVccStatsRxErrorsThe total number of receive SDU's with errors on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.12
atmxVccStatsRxSarTimeoutsThe total number of partially re-assembled SDUs that were discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.13
atmxVccStatsRxCrcErrorsThe total number of receive SDU's crc errors on this virtual channel.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.14
atmxVccStatsRxOversizedSdusThe total number of receive SDU's that are oversized.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.15
atmxVccStatsConnCreateTimeTime elapsed in seconds since the connection has been created.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.16
atmxVccStatsConnInIdleTimeTime that has elapsed in seconds since any traffic has been received on this connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.17
atmxVccStatsConnOutIdleTimeTime that has elapsed in seconds since any traffic has been sent out on this connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.18
atmxVccStatsConnModifiedTimeTime that has elapsed in seconds since any connection parameters have been modified.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.5.1.1.19
atmxLecStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.6
atmxLecStatsTableA table of ATM LEC statistics information.
SEQUENCE OF AtmxLecStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.6.1
atmxLecStatsEntryAn entry in the table, containing information about the LEC statistics.
AtmxLecStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1
atmxLecStatsTxArpReqTotal number of ARP requests transmitted from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.2
atmxLecStatsTxArpRspTotal number of ARP responses transmitted from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.3
atmxLecStatsTxControlPktsTotal number of control packets transmitted from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.4
atmxLecStatsTxUnicastPktsTotal number of unicast packets transmitted from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.5
atmxLecStatsTxMulticastPktsTotal number of multicast packets transmitted from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.6
atmxLecStatsTxBroadcastPktsTotal number of broadcast packets transmitted from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.7
atmxLecStatsTxDiscardPktsTotal number of transmission packets discarded from this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.8
atmxLecStatsRxArpReqTotal number of ARP requests received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.9
atmxLecStatsRxArpRspTotal number of ARP responses received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.10
atmxLecStatsRxControlPktsTotal number of control packets received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.11
atmxLecStatsRxUnicastPktsTotal number of unicast packets received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.12
atmxLecStatsRxMulticastPktsTotal number of multicast packets received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.13
atmxLecStatsRxBroadcastPktsTotal number of broadcast packets received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.14
atmxLecStatsRxDiscardPktsTotal number of discarded packets received for this LEC.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.6.1.1.15
atmxCipStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.7
atmxCipStatsTableA table of ATM CIP statistics information.
SEQUENCE OF AtmxCipStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.7.1
atmxCipStatsEntryAn entry in the table, containing information about the CIP statistics.
AtmxCipStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1
atmxCipStatsPktsFromOtherLISTotal number of packets received that does not belong to this logical IP subnet.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.2
atmxCipStatsTxArpReqTotal number of ARP requests transmitted from this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.3
atmxCipStatsTxArpRspTotal number of ARP responses transmitted from this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.4
atmxCipStatsTxInArpReqTotal number of InARP requests transmitted from this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.5
atmxCipStatsTxInArpRspTotal number of InARP responses transmitted from this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.6
atmxCipStatsTxDiscardsTotal number of packets discarded on transmit from this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.7
atmxCipStatsRxArpReqTotal number of ARP requests received for this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.8
atmxCipStatsRxArpRspTotal number of ARP responses received for this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.9
atmxCipStatsRxInArpReqTotal number of InARP requests received for this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.10
atmxCipStatsRxInArpRspTotal number of InARP responsese received for this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.11
atmxCipStatsRxDiscardsTotal number of packets discarded on receive for this CIP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.7.1.1.12
atmxSscopStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.8
atmxSscopStatsTableA table of ATM Service Specific Connection Oriented Protocol (SSCOP) statistics information.
SEQUENCE OF AtmxSscopStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.8.1
atmxSscopStatsEntryAn entry in the table, containing information about the ATM SSCOP statistics.
AtmxSscopStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1
atmxSscopStatsTxTotalPdusTotal number of transmit PDU's sent without error by SSCOP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.1
atmxSscopStatsTxDiscardSdusTotal number of transmit SDUs discarded by SSCOP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.2
atmxSscopStatsTxDiscardPdusTotal number of transmit PDUs discarded by SSCOP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.3
atmxSscopStatsTxErrorPdusTotal number of transmit PDUs with transmission errors.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.4
atmxSscopStatsTxBufferInUseCtrTransmit buffer in-use counter.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.5
atmxSscopStatsTxBufferInUseGaugeTransmit buffer in-use gauge.ro
Gauge32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.6
atmxSscopStatsRxTotalPdusTotal number of PDU's received without error by SSCOP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.7
atmxSscopStatsRxDiscardPdusTotal number of PDUs discarded on receipt by SSCOP.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.8
atmxSscopStatsRxErrorPdusTotal number of received PDUs with reception errors.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.9
atmxSscopStatsRxBufferInUseCtrReceive buffer in-use counter.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.10
atmxSscopStatsRxBufferInUseGaugeReceive buffer in-use gauge.ro
Gauge32
.1.3.6.1.4.1.207.8.9.2.1.1.8.1.1.11
atmxIlmiStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.9
atmxIlmiStatsTableA table of ATM ILMI statistics information.
SEQUENCE OF AtmxIlmiStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.9.1
atmxIlmiStatsEntryAn entry in the table, containing information about the ATM ILMI statistics.
AtmxIlmiStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.9.1.1
atmxIlmiTxPDUsTotal number of transmitted PDUs over the ILMI connection.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.9.1.1.2
atmxIlmiRxPDUsTotal number of received PDUs over the ILMI connection.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.9.1.1.3
atmxIlmiRxDiscardPDUsTotal number of received PDUs that are received over the ILMI connection and discarded.ro
Counter32
.1.3.6.1.4.1.207.8.9.2.1.1.9.1.1.4
atmxVccGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.10
atmxVccTableA table of ATM virtual channel connections status and parameter information.
SEQUENCE OF AtmxVccEntry
.1.3.6.1.4.1.207.8.9.2.1.1.10.1
atmxVccEntryAn entry in the table, containing information about the ATM virtual channel connections.
AtmxVccEntry
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1
atmxVccVpiThe virtual path identifier associated with this virtual connection.ro
AtmVpi
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.2
atmxVccVciThe virtual channel identifier associated with the virtual connection.
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.3
atmxVccCircuitTypeThe virtual connection circuit type.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.4
atmxVccOperStatusThe actual operational status of the VCC.ro
AtmConnectionOperStatusCodes
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.5
atmxVccUpTimeThe virtual channel connection up time in seconds since atmxVccOperStatus transitioned to the value 'up'.ro
Unsigned32
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.6
atmxVccTxQosClassTransmit Quality of Service for this virtual channel connection.rw
AtmQosClass
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.7
atmxVccTxBestEffortTransmit Best Effort Indicator for this virtual channel connection.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.8
atmxVccTxPeakCellRatePeak Cell Rate for CLP 0+1 in the transmit direction for this virtual channel connection.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.9
atmxVccRxQosClassReceive Quality of Service for this virtual channel connection.rw
AtmQosClass
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.10
atmxVccRxBestEffortReceive Best Effort Indicator for this virtual channel connection.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.11
atmxVccRxPeakCellRatePeak Cell Rate for CLP 0+1 in the receive direction for this virtual channel connection.rw
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.12
atmxVccRowStatusOnly the values 'active', 'createAndGo', and 'delete' are supported.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.13
atmxVccServiceTypeThe virtual connection Service type.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.10.1.1.14
atmxAddressGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.11
atmxCipArpGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.12
atmxCipArpTableA table of ATM address to IP address information.
SEQUENCE OF AtmxCipArpEntry
.1.3.6.1.4.1.207.8.9.2.1.1.12.1
atmxCipArpEntryAn entry in the table, containing information about the ATM address.
AtmxCipArpEntry
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1
atmxCipArpIPAddressThe IP address for this Arp entry.
IpAddress
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1.2
atmxCipArpAtmAddressThe ATM address for the Arp address.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1.3
atmxCipArpVciThe virtual channel identifier associated with Arp entry.rw
AtmClientVci
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1.4
atmxCipArpTimeToLiveThe Arp Entry time to live in seconds. The value 0 indicates an infinite time to livero
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1.5
atmxCipArpSourceThe source of this Arp entry.rw
AtmxArpEntryType
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1.6
atmxCipArpRowStatusOnly the values 'active', 'createAndGo', and 'delete' are supported.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.12.1.1.7
atmxLecArpGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.13
atmxLecArpTableA table of ATM address to MAC address information.
SEQUENCE OF AtmxLecArpEntry
.1.3.6.1.4.1.207.8.9.2.1.1.13.1
atmxLecArpEntryAn entry in the table, containing information about the ATM address.
AtmxLecArpEntry
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1
atmxLecArpMacAddressThe MAC address for identifying this Arp entry.
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1.2
atmxLecArpAtmAddressThe ATM address for the corresponding MAC addess.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1.3
atmxLecArpVciThe virtual channel identifier associated with Arp entry.rw
AtmVci
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1.4
atmxLecArpTimeToLiveThe address time to live in seconds. The value 0 indicates an infinite time to live.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1.5
atmxLecArpSourceThe source of this Arp entry.ro
AtmxArpEntryType
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1.6
atmxLecArpRowStatusOnly the values 'active', 'createAndGo', and 'delete' are supported.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.13.1.1.7
atmxPtToPtGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.14
atmxPtToPtTableA table of point to point over ATM.
SEQUENCE OF AtmxPtToPtEntry
.1.3.6.1.4.1.207.8.9.2.1.1.14.1
atmxPtToPtEntryAn entry in the table containg information about the point to point connection.
AtmxPtToPtEntry
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1
atmxPtToPtIndexThe index which identifies each entry instance.
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.1
atmxPtToPtDescriptionA description of the point to point link.rw
DisplayString
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.2
atmxPtToPtEncapThe data encapsulation format. 'rfc1483' identifies the format defined in RFC 1483.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.3
atmxPtToPtConnTypeThe connection type of the point to point link.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.4
atmxPtToPtVciThe VCI used if atmxPtToPtConnType has the value 'pvc'.rw
AtmClientVci
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.5
atmxPtToPtDestAddrThe ATM address of the other end point of the connection.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.6
atmxPtToPtRowStatusThis object is used to create or delete an entry in the atmxPtToPtTable. Only the values 'active', 'createAndGo', and 'delete' are supported. The objects atmxPtToPtVlanNumber, atmxPtToPtConnType, and atmxPtToPtVci if atmxPtToPtConnType is 'pvc' or atmxPtToPtDestAddr if atmxPtToPtConnType is 'svc' are required for a successful 'createAndGo'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.7
atmxPtToPtIfIndexThis is the value of ifIndex or 0 if ifIndex is not known.ro
IfIndexOrZero
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.8
atmxPtToPtVlanNumberThe VLAN which is supported by this point to point link.rw
AtmxVlanRange
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.9
atmxPtToPtAdminStatusThe administrative status of this point to point instance.rw
AtmAdminStatus
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.10
atmxPtToPtOperStatusThe operational status of this point to point instance.ro
AtmConnectionOperStatusCodes
.1.3.6.1.4.1.207.8.9.2.1.1.14.1.1.11
atmxPtToPtStatsTableA table of point to point Statistics.
SEQUENCE OF AtmxPtToPtStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.14.2
atmxPtToPtStatsEntryAn entry in the table containg information about the point to point connection statistics.
AtmxPtToPtStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.14.2.1
atmxPtToPtStatsTotalTxPktsTotal Transmission Packets through this Connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.14.2.1.1
atmxPtToPtStatsTotalRxPktsTotal Packets Received through this Connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.14.2.1.2
atmxPtToPtStatsTotalTxDiscardsTotal Transmission packets discarded by this connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.14.2.1.3
atmxPtToPtStatsTotalRxDiscardsTotal Received packets discarded by this connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.14.2.1.4
atmxTrunkGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.207.8.9.2.1.1.15
atmxTrunkTableA table of trunk over ATM.
SEQUENCE OF AtmxTrunkEntry
.1.3.6.1.4.1.207.8.9.2.1.1.15.1
atmxTrunkEntryAn entry in the table containg information about the trunk connection.
AtmxTrunkEntry
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1
atmxTrunkIndexThe index which identifies each entry instance.
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.1
atmxTrunkDescriptionA description of the trunk link.rw
DisplayString
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.2
atmxTrunkConnTypeThe connection type of the trunk link.rw
Enumeration
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.3
atmxTrunkVciThe VCI used if atmxTrunkConnType has the value 'pvc'.rw
AtmClientVci
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.4
atmxTrunkDestAddrThe ATM address of the other end point of the connection if atmxTrunkConnType is 'svc'.rw
AtmAddress
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.5
atmxTrunkRowStatusThis attribute is used to create or delete an entry in the atmxTrunkTable. Only the values 'active', 'createAndGo', and 'delete' are supported. The following objects must exist for a successful create, atmxTrunkConnType and atmxTrunkVci if atmxTrunkConnType has the value 'pvc' or atmxTrunkDestAddr if atmxTrunkConnType has the value 'svc'.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.6
atmxTrunkAdminStatusThe administrative status of this trunk instance.rw
AtmAdminStatus
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.7
atmxTrunkOperStatusThe operational status of this trunk instance.ro
AtmConnectionOperStatusCodes
.1.3.6.1.4.1.207.8.9.2.1.1.15.1.1.8
atmxTrunkVlanTableA table containing the list of 1 or more VLan which are trunked over ATM. Creating an entry in this table creates entries in ifTable and SWITCH-VLAN_MIB.vPortTable.
SEQUENCE OF AtmxTrunkVlanEntry
.1.3.6.1.4.1.207.8.9.2.1.1.15.2
atmxTrunkVlanEntryAn entry in the table identifies each VLAN and the trunk connection.
AtmxTrunkVlanEntry
.1.3.6.1.4.1.207.8.9.2.1.1.15.2.1
atmxTrunkVlanNumberThis identifies the VLAN whose traffic is carried over the trunk. The value of this object corresponds to vLanNumber defined in the SWITCH-VLAN-MIB module.
AtmxVlanRange
.1.3.6.1.4.1.207.8.9.2.1.1.15.2.1.1
atmxTrunkVlanIfIndexThis is the value of ifIndex of the Vlan interface.ro
IfIndexOrZero
.1.3.6.1.4.1.207.8.9.2.1.1.15.2.1.2
atmxTrunkVlanRowStatusThis attribute is used to create or delete an entry in the atmxTrunkTable. Only the values 'active', 'createAndGo', and 'delete' are supported. The corresponding atmTrunkRowStatus must have the value 'active' before this object may be created.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.207.8.9.2.1.1.15.2.1.3
atmxTrunkStatsTableA table of trunk statistics.
SEQUENCE OF AtmxTrunkStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.15.3
atmxTrunkStatsEntryAn entry in the table containg information about the trunk connection statistics.
AtmxTrunkStatsEntry
.1.3.6.1.4.1.207.8.9.2.1.1.15.3.1
atmxTrunkStatsTotalTxPktsTotal Transmission Packets through this Connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.15.3.1.1
atmxTrunkStatsTotalRxPktsTotal Packets Received through this Connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.15.3.1.2
atmxTrunkStatsTotalTxDiscardsTotal Transmission packets discarded by this connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.15.3.1.3
atmxTrunkStatsTotalRxDiscardsTotal Received packets discarded by this connection.ro
INTEGER
.1.3.6.1.4.1.207.8.9.2.1.1.15.3.1.4