AtiL2-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AtiL2-MIB.
239
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
239 total| Object Name |
|---|
alliedTelesyn OBJECT IDENTIFIER .1.3.6.1.4.1.207 |
RFC-1215 Unknown .1.3.6.1.4.1.207 |
newRootThe newRoot trap indicates that the sending agent
has become the new root of the Spanning Tree; the
trap is sent by a bridge soon after its election
as the new root, e.g., upon expiration of the
Topology Change Timer immediately subsequent to
its election. Implementation of this trap is
optional. TRAP-TYPE .1.3.6.1.4.1.207.0.101 |
topologyChangeA topologyChange trap is sent by a bridge when
any of its configured ports transitions from the
Learning state to the Forwarding state, or from
the Forwarding state to the Blocking state. The
trap is not sent if a newRoot trap is sent for the
same transition. Implementation of this trap is
optional. TRAP-TYPE .1.3.6.1.4.1.207.0.102 |
atiL2FanStopTrapA Trap sent from the Module defined by the varable
above when a fan from that Module stops. TRAP-TYPE .1.3.6.1.4.1.207.0.103 |
atiL2TemperatureAbnormalTrapA Trap sent from the Module defined by the varable
above when temperature of the Module is abnormal. TRAP-TYPE .1.3.6.1.4.1.207.0.104 |
atiL2PowerSupplyOutageA Trap sent from the Module defined by the varable
above when one of the power supply goes down. TRAP-TYPE .1.3.6.1.4.1.207.0.105 |
atiL2IntruderAlertA Trap sent from the specified module and specified
port when an intruder has been detected. TRAP-TYPE .1.3.6.1.4.1.207.0.106 |
atiProduct OBJECT IDENTIFIER .1.3.6.1.4.1.207.1 |
swhub OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4 |
at-8324 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.37 |
at-8124XL-V2 OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.52 |
at-8326GB OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.72 |
at-9410GB OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.73 |
at-8350GB OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.74 |
at-8316F OBJECT IDENTIFIER .1.3.6.1.4.1.207.1.4.77 |
mibObject OBJECT IDENTIFIER .1.3.6.1.4.1.207.8 |
atiL2Mib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33 |
atiL2GlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.1 |
atiL2SwProductIdentifies the software product the device is
running.ro DisplayString .1.3.6.1.4.1.207.8.33.1.1 |
atiL2SwVersionIdentifies the version number of the present
release.ro DisplayString .1.3.6.1.4.1.207.8.33.1.2 |
atiL2ResetObject use to reset all the Modules globally.rw Enumeration .1.3.6.1.4.1.207.8.33.1.3 |
atiL2MirroringSourceModuleThis is the mirror source module number. If the
atiL2EthConfigMirrorState is Enabled then the mirror
source module/port data gets routed to the mirror
destination module/port. Both transmitted and
recieved source activity is mirrored to the destination.
This arrangement is to put an RMON Probe on the
destination port to probe the traffic on the Source port.
This object will return a '0' if the MirrorState is not
enabled.rw INTEGER .1.3.6.1.4.1.207.8.33.1.4 |
atiL2MirroringSourcePortThis is the Source port number for which there is
another mirror port.If the atiL2EthConfigMirrorState is
Enabled then the mirror portgets routed with all the
packets going in and out of Source port. This
arrangement is to put an RMON Probe on mirrored port to
Probe the traffic on the Source port. One of the port is
dedicated to this so that for any port as source port,
this dedicated port can be a mirrored port. This object
will return a '0' if the MirrorState is not enabled.rw INTEGER .1.3.6.1.4.1.207.8.33.1.5 |
atiL2MirroringDestinationModuleThis is the mirror destination module number. If the
atiL2EthConfigMirrorState is Enabled then the mirror
source module/port data gets routed to the mirror
destination module/port. Both transmitted and recieved
source activity is mirrored to the destination. This
arrangement is to put an RMON Probe on the destination
port to probe the traffic on the Source port. This
object will return a '0' if the MirrorState is not
enabled.rw INTEGER .1.3.6.1.4.1.207.8.33.1.6 |
atiL2MirroringDestinationPortThis is the Destination port number for which there is
another mirror port.If the atiL2EthConfigMirrorState is
Enabled then,the mirror portgets routed with all the
packets going in and out of Destination port. This
arrangement is to put an RMON Probe on mirrored port to
Probe the traffic on the Destination port. One of the
port is dedicated to this so that for any port as
destination port, this dedicated port can be a mirrored
port. This object will return a '0' if the MirrorState
is not enabled.rw INTEGER .1.3.6.1.4.1.207.8.33.1.7 |
atiL2MirrorStateif the state of Mirroring is enabled by selecting one
of the two values , then the Mirroring explained above
works. If disabled, port operation works normally. No
Traffic gets routed from MirroringSourcePort to
Destination Mirrored Port.rw Enumeration .1.3.6.1.4.1.207.8.33.1.8 |
atiL2IGMPStateThis attribute allows an administrative request to
configure IGMPrw Enumeration .1.3.6.1.4.1.207.8.33.1.9 |
atiL2DeviceNumberThe total number of devices in the stack.ro INTEGER .1.3.6.1.4.1.207.8.33.1.10 |
atiL2IpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.2 |
atiL2CurrentIpAddressThe Current IP address is the one which is currently
used and is obtained dynamically through one of the
protocols interaction.( DHCP or Bootp.) This address
is NULL if the Address is Statically configured.ro IpAddress .1.3.6.1.4.1.207.8.33.2.1 |
atiL2ConfiguredIpAddressThe Configured IP address of the device. This is
the address configured through Network or Local Omega.rw IpAddress .1.3.6.1.4.1.207.8.33.2.2 |
atiL2ConfiguredSubnetMaskThe Configured Subnet Mask of the device.rw IpAddress .1.3.6.1.4.1.207.8.33.2.3 |
atiL2ConfiguredRouterThe Configured Gateway/Router address of the devicerw IpAddress .1.3.6.1.4.1.207.8.33.2.4 |
atiL2IPAddressStatusThe IP Address can be obtained/configured by any of
the above different ways. This object specifies how
IP address currently on the switch Box, was
configured/obtained.ro Enumeration .1.3.6.1.4.1.207.8.33.2.5 |
atiL2DNServerThe Configured DNS Server address of the devicerw IpAddress .1.3.6.1.4.1.207.8.33.2.6 |
atiL2DefaultDomainNameThis Object defines the Default Domain where this
switch can be belong to.rw DisplayString .1.3.6.1.4.1.207.8.33.2.7 |
atiL2NMGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.3 |
atiL2NwMgrTableA list of SNMP Trap Manager stations Entries.
The number of entries is given by the
switchNwMgrTotal mib object. SEQUENCE OF AtiL2NwMgrEntry .1.3.6.1.4.1.207.8.33.3.1 |
atiL2NwMgrEntryTrap receipt Manager Entry containing ipaddress of
the configured NMS's to which Traps are sent. AtiL2NwMgrEntry .1.3.6.1.4.1.207.8.33.3.1.1 |
atiL2NwMgrIndexThe Index of the Managers Ip address.ro INTEGER .1.3.6.1.4.1.207.8.33.3.1.1.1 |
atiL2NwMgrIpAddrThe IP Address of the NMS host configured.rw IpAddress .1.3.6.1.4.1.207.8.33.3.1.1.2 |
atiL2DHCPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.4 |
atiL2DHCPSysGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.4.1 |
atiL2DHCPCurrentDHCPClientAddressCurrent IP address of the client. To start with,it might
be null. This is filled by the server when sending a
DHCPOFFER and the client uses the most comfortable offer
from offers sent by different DHCP servers. A DHCPREQUEST
packet is sent with the Client address agreed upon to the
selected server ( Broadcast). Server Acks back this packet
which is where Client/Server moves to the Bound state. Once
reached into Bound state, the client address is made the
official address on the client.ro IpAddress .1.3.6.1.4.1.207.8.33.4.1.1 |
atiL2DHCPSubnetMaskWhen the client/server reaches the BOUND state, this is
one of the parameters set by the server.ro IpAddress .1.3.6.1.4.1.207.8.33.4.1.2 |
atiL2DHCPCurrentRelayAgentAddressThe IP address of the DHCP relay Agent on the same subnet.
Normally there will be no DHCP server on each of the
subnet and this Relay Agent will act in sending server
across the subnets. There might not be any relay agent.
This depends on the network Toplogy like where is the
DHCP server and DHCP client.ro IpAddress .1.3.6.1.4.1.207.8.33.4.1.3 |
atiL2DHCPNextDHCPServerAddressThe IP address of the next DHCP server to be used during
bootstrap. This address is sent by the DHCP server in
the messages DHCPOFFER, DHCPACK,DHCPNACK.ro IpAddress .1.3.6.1.4.1.207.8.33.4.1.4 |
atiL2DHCPTimerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.4.2 |
atiL2DHCPLeaseTimerWhen the client/server reaches the BOUND state, this is
one of the parameters set by the server. The lease time
period in seconds for the DHCP client for using IP address
on lease from the server. At the end of 50% of this timer
a renewal request is sent by the client . This is the next
Object atiL2DHCPReacquisitionTimer.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.207.8.33.4.2.1 |
atiL2DHCPReacquisitionTimerWhen the client/server reaches the BOUND state, this is
one of the parameters set by the server.
Mentioned in RFC2131 4.4.5 as T1, this renewal time
period in secs for the DHCP client is for using IP address
on lease from the server Once the Reacquisition Timer
period in secs after the lease period is reached,
the client sends a DHCPREQUEST to the DHCP server
requesting for renewal of the lease. Default would be 50%
of the Lease timer which is represeneted by the above
object. The client moves from BOUND to RENEW state once
the DHCPREQUEST is sent after time T1 secs is passed from
the start of to release time. T1 is always less than T2
( see below for 'T2') which is less than the lease Timer
period.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.207.8.33.4.2.2 |
atiL2DHCPExpirationTimerWhen the client/server reaches the BOUND state, this is
one of the parameters set by the server.
Mentioned in RFC2131 4.4.5 as T2,this Expiration time
period in secs is the time period in secs during which
DHCP has gone through the BOUND->RENEWAL state. After T1
secs and when the state machine reaches T2 secs,
( T1 < T2 < lease period), DHCP client sends another
DHCPREQUEST to the server asking the server to renew the
lease for the IP parameters. By default it would be 87.5%
of the Lease timer .If there is DHCPACK then the DHCP
client moves from REBIND to BOUND. Else it moves to INIT
state where it starts all over again sending a request for
DHCPDISCOVER.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.207.8.33.4.2.3 |
atiL2DeviceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.5 |
atiL2deviceTableThe table contains the mapping of all devices
in the chassis. SEQUENCE OF AtiL2deviceEntry .1.3.6.1.4.1.207.8.33.5.1 |
atiL2deviceEntryThe device entry in the DeviceTable. AtiL2deviceEntry .1.3.6.1.4.1.207.8.33.5.1.1 |
atiL2deviceIndexThe Slot number in the chassis where the device is
installed.ro INTEGER .1.3.6.1.4.1.207.8.33.5.1.1.2 |
atiL2deviceDescrA textual description of the device.ro DisplayString .1.3.6.1.4.1.207.8.33.5.1.1.3 |
atiL2deviceProductTypeThis object will return Product Type.ro Enumeration .1.3.6.1.4.1.207.8.33.5.1.1.4 |
atiL2devicePortCountThe number of ports contained within the device.
Valid range is 1-32. Within each device, the
ports are uniquely numbered in the range from
1 to maxportCapacity.ro INTEGER .1.3.6.1.4.1.207.8.33.5.1.1.5 |
atiL2deviceSecurityConfigSecurity feature configuration Object.The Security
disable would let the device carry on the
learn-new-address-as-it-comes-in mode as usual.When
security is enabled-with-learning-locked, the learning
of new address is stopped and the addresses locked in
the device is used as the security Database. If an
address comes in which is not present in the Device
Security Database, then any of the atiL2SecurityAction
Configured is triggered. When limited-enabled is
selected, a per-port atiL2PortSecurityNumberOfAddresses
specify the max number of MACs to be learned.rw Enumeration .1.3.6.1.4.1.207.8.33.5.1.1.6 |
atiL2deviceSecurityActionSecurity Action to be carried when the
atiL2SecurityConfig is enabled-with-learning-locked
or limted-enabled.rw Enumeration .1.3.6.1.4.1.207.8.33.5.1.1.7 |
atiL2deviceDebugAvailableBytesThis is strictly for Debug reason and this object
should not be believed as the correct number.ro INTEGER .1.3.6.1.4.1.207.8.33.5.1.1.8 |
atiL2deviceMDA1TypeThis object returns the MDA type of the Uplink
port. The values of 1 and 2 are the only one
present in 81XX. 82XX has all the values
supported. This object returns the MDA type of
the Uplink Port named 'A'. It returns 'none'
if a 'A' MDA slot is not installed.ro Enumeration .1.3.6.1.4.1.207.8.33.5.1.1.9 |
atiL2deviceMDA2TypeThis Object is supported in 81XX 82XX product
lines. The values of 1 and 2 are the only one
present in 81XX. 82XX has all the values
supported. This object returns the MDA type of
the Uplink Port named 'B'. It returns 'none'
if a 'B' MDA slot is not installed.ro Enumeration .1.3.6.1.4.1.207.8.33.5.1.1.10 |
atiL2deviceResetSetting this object to 'switch-reset' will
cause the switch to perform a hardware reset
within approximately 4-6 seconds. Setting this
object to 'switch-no-reset will have no effect.
The value 'no-reset' will be returned whenever
this object is retrieved.rw Enumeration .1.3.6.1.4.1.207.8.33.5.1.1.11 |
atiL2EthernetStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.6 |
atiL2EthMonStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.6.1 |
atiL2EthMonStatsTableA list of statistics entries. SEQUENCE OF AtiL2EthMonStatsEntry .1.3.6.1.4.1.207.8.33.6.1.1 |
atiL2EthMonStatsEntryA collection of statistics kept for a particular port. AtiL2EthMonStatsEntry .1.3.6.1.4.1.207.8.33.6.1.1.1 |
atiL2EthMonModuleIdThis Object Identifies the Module Id for which the
Statistics is collected.ro INTEGER .1.3.6.1.4.1.207.8.33.6.1.1.1.1 |
atiL2EthMonRxGoodFramesThe total number of Good Frames received on this
module.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.2 |
atiL2EthMonTxGoodFramesThe total number of Good Frames Transmitted by this
module.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.3 |
atiL2EthMonTxTotalBytesThe total number of Bytes transmitted from this
module.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.4 |
atiL2EthMonTxDeferredThis is the count of first time Transmission attempt
which failed on an interface due to medium being busy.rodeprecated Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.5 |
atiL2EthMonTxCollisionsThe total number of collisions while switching on an
interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.6 |
atiL2EthMonTxBroadcastFramesThe total number of Transmit Broadcast Frames while
switching on an interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.7 |
atiL2EthMonTxMulticastFramesThe total number of Transmit Multicast while switching
on an interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.8 |
atiL2EthMonRxOverrunsThe total number of Recieved Overrun Frames while
switching on an interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.1.1.9 |
atiL2EthPortMonStatsTableA list of statistics entries per Port on a Module. SEQUENCE OF AtiL2EthPortMonStatsEntry .1.3.6.1.4.1.207.8.33.6.1.2 |
atiL2EthPortMonStatsEntryA collection of statistics kept for a particular port. AtiL2EthPortMonStatsEntry .1.3.6.1.4.1.207.8.33.6.1.2.1 |
atiL2EthPortMonModuleIdThis Object Identifies the Module Id for which the
Statistics is collected.ro INTEGER .1.3.6.1.4.1.207.8.33.6.1.2.1.1 |
atiL2EthPortMonPortIdThis Object Identifies the Port on the Module
recognised by EthMonPortModuleId for which the
Statistics is collected.ro INTEGER .1.3.6.1.4.1.207.8.33.6.1.2.1.2 |
atiL2EthPortMonRxGoodFramesThe total number of Good Frames received on this module.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.3 |
atiL2EthPortMonTxGoodFramesThe total number of Good Frames Transmitted by this
module.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.4 |
atiL2EthPortMonTxTotalBytesThe total number of Bytes transmitted from this module.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.5 |
atiL2EthPortMonTxDeferredThis is the count of first time Transmission attempt
which failed on an interface due to medium being busy.rodeprecated Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.6 |
atiL2EthPortMonTxCollisionsThe total number of collisions while switching on an
interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.7 |
atiL2EthPortMonTxBroadcastFramesThe total number of Transmit Broadcast Frames on this
port and Module while switching on an interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.8 |
atiL2EthPortMonTxMulticastFramesThe total number of Transmit Multicast on this port
and Module while switching on an interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.9 |
atiL2EthPortMonRxOverrunsThe total number of Recieved Overrun Frames on this
port and Module while switching on an interface.ro Counter .1.3.6.1.4.1.207.8.33.6.1.2.1.10 |
atiL2EthErrStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.6.2 |
atiL2EthErrStatsTableA list of statistics entries. SEQUENCE OF AtiL2EthErrStatsEntry .1.3.6.1.4.1.207.8.33.6.2.1 |
atiL2EthErrorStatsEntryA collection of statistics kept for a particular port. AtiL2EthErrStatsEntry .1.3.6.1.4.1.207.8.33.6.2.1.1 |
atiL2EthErrModuleIdThis Object Identifies the Module Id for which the
Statistics is collected.ro INTEGER .1.3.6.1.4.1.207.8.33.6.2.1.1.1 |
atiL2EthErrorCRCThe total number of CRC errors on received packets.ro Counter .1.3.6.1.4.1.207.8.33.6.2.1.1.2 |
atiL2EthErrorAlignmentThe total number of packets received that has alignment
errors.ro Counter .1.3.6.1.4.1.207.8.33.6.2.1.1.3 |
atiL2EthErrorRxBadFramesThe counter is incremented when a bad frame was
received.ro Counter .1.3.6.1.4.1.207.8.33.6.2.1.1.4 |
atiL2EthErrorLateCollisionsThis object counts the number of times the collison was
detected in the port.ro Counter .1.3.6.1.4.1.207.8.33.6.2.1.1.5 |
atiL2EthErrorTxTotalTotal number of error resulted from transfer operations.ro Counter .1.3.6.1.4.1.207.8.33.6.2.1.1.6 |
atiL2EthPortErrStatsTableA list of statistics entries. SEQUENCE OF AtiL2EthPortErrStatsEntry .1.3.6.1.4.1.207.8.33.6.2.2 |
atiL2EthPortErrorStatsEntryA collection of statistics kept for a particular port. AtiL2EthPortErrStatsEntry .1.3.6.1.4.1.207.8.33.6.2.2.1 |
atiL2EthPortErrModuleIdThis Object Identifies the Module Id for which the
Statistics is collected.ro INTEGER .1.3.6.1.4.1.207.8.33.6.2.2.1.1 |
atiL2EthPortErrPortIdThis Object Identifies the Port on the Module
recognised by the above Object for which the
Statistics is collected.ro INTEGER .1.3.6.1.4.1.207.8.33.6.2.2.1.2 |
atiL2EthPortErrorCRCThe total number of CRC errors on received packets.ro Counter .1.3.6.1.4.1.207.8.33.6.2.2.1.3 |
atiL2EthPortErrorAlignmentThe total number of packets received that has alignment
errors.ro Counter .1.3.6.1.4.1.207.8.33.6.2.2.1.4 |
atiL2EthPortErrorRxBadFramesThe counter is incremented when a bad frame was
received.ro Counter .1.3.6.1.4.1.207.8.33.6.2.2.1.5 |
atiL2EthPortErrorLateCollisionsThis object counts the number of times the collison was
detected in the port.ro Counter .1.3.6.1.4.1.207.8.33.6.2.2.1.6 |
atiL2EthPortErrorTxTotalTotal number of error resulted from transfer operations.ro Counter .1.3.6.1.4.1.207.8.33.6.2.2.1.7 |
atiL2DevicePortConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.7 |
atiL2DevicePortTableTable of basic port configuration information. SEQUENCE OF AtiL2DevicePortEntry .1.3.6.1.4.1.207.8.33.7.1 |
atiL2DevicePortEntryAn entry in the port config table. AtiL2DevicePortEntry .1.3.6.1.4.1.207.8.33.7.1.1 |
atiL2DeviceIdThis object identifies the Module Id of the switch
Stack.ro INTEGER .1.3.6.1.4.1.207.8.33.7.1.1.1 |
atiL2DevicePortNumberThis object identifies the Port on atiL2ModuleId of
the switch Stack.ro INTEGER .1.3.6.1.4.1.207.8.33.7.1.1.2 |
atiL2DevicePortNameThis attribute associates a user defined string name
with the port.rw DisplayString .1.3.6.1.4.1.207.8.33.7.1.1.3 |
atiL2DevicePortAutosenseOrHalfDuplexThis attribute allows an administrative request to
configure whether this port can Autosense or Force
the Half Duplex or Full Duplex on different Port
Speeds.rw Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.4 |
atiL2DevicePortLinkStateThis attribute allows an administrative request to
read the status of link state on this port.ro Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.5 |
atiL2DevicePortDuplexStatusThis attribute allows an administrative request to
read the status of Duplex on this port.ro Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.6 |
atiL2DevicePortSpeedThis attribute allows an administrative request to
read or write the speed of this port. This Object
is valid only for 10/100Mbits and gigaBits ports.
The only gigabit port that can be set is that of
AT-A14 and it's values can be either 2 or 3.ro Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.7 |
atiL2DevicePortStateThis attribute allows an administrative request to
disable or enable communications on this port.It also
responds with the status of the port .Except enabled(1) and
disabled(2), all values are read-only status.rw Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.8 |
atiL2DevicePortTransmitPacingConfigThis Object is supported on at36XX product line Only.
This attribute allows the transmit Pacing to be
enabled or disabled.rw Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.9 |
atiL2DevicePortSTPConfigThis attribute allows a bridging Mode to be configured
with either Spanning Tree enabled or disabled. When
Spanning tree is enabled, make sure that this port is
belonging to a valid Bridge_id. Spanning Tree is
enabled only when a valid Bridge_id is set.rw Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.10 |
atiL2DevicePortBridgeidThe Bridge to which this port belongs to.rw INTEGER .1.3.6.1.4.1.207.8.33.7.1.1.11 |
atiL2DevicePortSTPCostThe Cost of the Spanning Tree Protocol.This object
is valid only when STP is enabled.rw INTEGER .1.3.6.1.4.1.207.8.33.7.1.1.12 |
atiL2DevicePortSTPPriorityThe Priority of the spanning Tree Protocol.
This object is valid when STP is enabled.rw INTEGER .1.3.6.1.4.1.207.8.33.7.1.1.13 |
atiL2DevicePortFlowControlEnableThis per-port attribute describes whether the port
identified has flow Control Enabled or not. Flow
Control on Full Duplex and Half Duplex is detected
and automatically, flow control accordingly is
taken care of. By Default, Flow Control is Disabled.rwdeprecated Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.14 |
atiL2DevicePortBackPressureEnableThis per-port attribute describes whether the port
identified has Back Pressure Enabled or not. By
Default, Back Pressure is Disabled.rwdeprecated Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.15 |
atiL2DevicePortVlanTagPriorityConfigThis per-port attribute allows the configuration of
the Tag Priority to be Override or Use the Tag
Priority. By Default, all ports use Vlan Tag priority.rwdeprecated Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.16 |
atiL2DevicePortQOSPriorityConfigThis per-port attribute is applicable only to
at-8324, at-8124XL-V2 and at-8316 and it allows for
the configuration of the Priority of the port to be
high or Low. In a switch environment, Ports with high
Priority and traffic from and to the ports get more
priority when compared with those with normal
priority. By Default, all ports have Normal Priority.rwdeprecated Enumeration .1.3.6.1.4.1.207.8.33.7.1.1.17 |
atiL2VlanConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.8 |
atiL2BasicVlanTableTable of Virtual LAN configured. SEQUENCE OF AtiL2BasicVlanEntry .1.3.6.1.4.1.207.8.33.8.1 |
atiL2BasicVlanEntryAn entry in the table, containing VLAN information. AtiL2BasicVlanEntry .1.3.6.1.4.1.207.8.33.8.1.1 |
atiL2BeVlanIndexThis object identifies the VLAN.ro INTEGER .1.3.6.1.4.1.207.8.33.8.1.1.1 |
atiL2BeVlanNameThis attribute associates a user defined string with
the Virtual LAN. To configure a new VLAN, do 'set'
operation on this object with the VLAN name. To delete
a VLAN, do 'set' operation with string '*<module_num>',
where <module_num> is the module number (1..8) from
which the delete request is being sent. If a vlan is
being created or modified, before configuring any of
the objects in this row, set atiL2VlanStatus to
'under-construction' and once configured with all the
information, set the same object to operational. This
step is not required when deleting a vlan.rw DisplayString .1.3.6.1.4.1.207.8.33.8.1.1.2 |
atiL2BeVlanTagIdThis object configures the VId in the Tag Information header
in accordance with 802.1q spec.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw INTEGER .1.3.6.1.4.1.207.8.33.8.1.1.3 |
atiL2BeVlanModule1UntaggedPortsThis Object builds the Output Ports on the Module that
participate in the Vlan with the atiL2BeVlanName. The Format
of the input string would be like '1,2,5,7,12..15,18-22,26'.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.4 |
atiL2BeVlanModule1TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is
not set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.5 |
atiL2BeVlanModule2UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is
not set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.6 |
atiL2BeVlanModule2TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is
not set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.7 |
atiL2BeVlanModule3UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.8 |
atiL2BeVlanModule3TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.9 |
atiL2BeVlanModule4UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.10 |
atiL2BeVlanModule4TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.11 |
atiL2BeVlanModule5UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.12 |
atiL2BeVlanModule5TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.13 |
atiL2BeVlanModule6UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.14 |
atiL2BeVlanModule6TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.15 |
atiL2BeVlanModule7UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.16 |
atiL2BeVlanModule7TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.17 |
atiL2BeVlanModule8UntaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.18 |
atiL2BeVlanModule8TaggedPortsThis Object builds the Output Ports on the Module
atiL2BeVlanModuleId that participate in the Vlan with the
atiL2BeVlanName. The Format of the input string would be
like '1,2,5,7,12'.
Please select the Module by setting the atiL2BeVlanModuleId
with the Module Id and then set the port mask. If this is not
set, by default this will be set to 1.
Before configuring any of the objects in this row , set the
atiL2VlanStatus to 'under-construction' and once configured
with all the information, please set the same object to
operational.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.1.1.19 |
atiL2BeVlanRowStatusThis object is used to create or modify a vlan. The user
should first set this object to under-construction. After
the vlan name, the tag Id and the ports belonging to the vlan
are configured/modified, this object should be set to
operational. If it is not set to operational, the whole row
will be lost and the vlan will not be configured in the switch.rw Enumeration .1.3.6.1.4.1.207.8.33.8.1.1.20 |
atiL2Port2VlanTableTable of per port Virtual LAN configuration. SEQUENCE OF AtiL2Port2VlanEntry .1.3.6.1.4.1.207.8.33.8.2 |
atiL2Port2VlanEntryAn entry in the table, containing per port VLAN
information. AtiL2Port2VlanEntry .1.3.6.1.4.1.207.8.33.8.2.1 |
atiL2PvModuleIdThis object identifies the Module Id on the switching
Stack.ro INTEGER .1.3.6.1.4.1.207.8.33.8.2.1.1 |
atiL2PvPortNumberThis object identifies the port on the Module
atiL2PvModuleId .ro INTEGER .1.3.6.1.4.1.207.8.33.8.2.1.2 |
atiL2PvVlanNameThis attribute associates a user defined string with
the Virtual LAN. This Object is the same as atiL2BeVlanName.
Please make sure to give the same string as atiL2BeVlanName.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.8.2.1.3 |
atiL2IfExt OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.9 |
atiL2IfExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.9.1 |
atiIfExtnTableA list of interface entries. The number of entries is
given by the value of ifNumber. SEQUENCE OF AtiIfExtnEntry .1.3.6.1.4.1.207.8.33.9.1.1 |
atiIfExtnEntryAn interface entry containing objects at the
subnetwork layer and below for a particular interface. AtiIfExtnEntry .1.3.6.1.4.1.207.8.33.9.1.1.1 |
atiIfExtnIndexA unique value for each interface corresponding to the
ifIndex value for the same interface.ro INTEGER .1.3.6.1.4.1.207.8.33.9.1.1.1.1 |
atiIfExtnModuleIdThe unit number associated with this particular
interface.ro INTEGER .1.3.6.1.4.1.207.8.33.9.1.1.1.2 |
atiIfExtnPortThe port number within a unit or slot.ro INTEGER .1.3.6.1.4.1.207.8.33.9.1.1.1.3 |
atiL2BridgeMib OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.10 |
atiL2BrBase OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.10.1 |
atiL2BrBaseTableTable of basic bridge information. SEQUENCE OF AtiL2BrBaseEntry .1.3.6.1.4.1.207.8.33.10.1.1 |
atiL2BrBaseEntryAn entry in the atiL2BrBaseTable. AtiL2BrBaseEntry .1.3.6.1.4.1.207.8.33.10.1.1.1 |
atiL2BrBaseLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.1.1.1.1 |
atiL2BrBaseBridgeAddressThe MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only required to be unique.
When concatenated with atiL2BrStpPriority a unique
BridgeIdentifier is formed which is used in the
Spanning Tree Protocol.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.10.1.1.1.2 |
atiL2BrBaseNumPortsThe number of ports controlled by this bridging
entity.ro INTEGER .1.3.6.1.4.1.207.8.33.10.1.1.1.3 |
atiL2BrBaseTypeIndicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.ro Enumeration .1.3.6.1.4.1.207.8.33.10.1.1.1.4 |
atiL2BrBasePortTableA table that contains generic information about
every port that is associated with this bridge.
Transparent, source-route, and srt ports are
included. SEQUENCE OF AtiL2BrBasePortEntry .1.3.6.1.4.1.207.8.33.10.1.4 |
atiL2BrBasePortEntryA list of information for each port of the
bridge. AtiL2BrBasePortEntry .1.3.6.1.4.1.207.8.33.10.1.4.1 |
atiL2BrBasePortLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.1.4.1.1 |
atiL2BrBasePortThe port number of the port for which this entry
contains bridge management information.ro INTEGER .1.3.6.1.4.1.207.8.33.10.1.4.1.2 |
atiL2BrBasePortIfIndexThe value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port.ro INTEGER .1.3.6.1.4.1.207.8.33.10.1.4.1.3 |
atiL2BrBasePortCircuitFor a port which (potentially) has the same value
of atiL2BrBasePortIfIndex as another port on the
same bridge, this object contains the name of an
object instance unique to this port. For example,
in the case where multiple ports correspond one-
to-one with multiple X.25 virtual circuits, this
value might identify an (e.g., the first) object
instance associated with the X.25 virtual circuit
corresponding to this port.
For a port which has a unique value of
atiL2BrBasePortIfIndex, this object can have the
value { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.10.1.4.1.4 |
atiL2BrBasePortDelayExceededDiscardsThe number of frames discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source
route bridges.ro Counter .1.3.6.1.4.1.207.8.33.10.1.4.1.5 |
atiL2BrBasePortMtuExceededDiscardsThe number of frames discarded by this port due
to an excessive size. It is incremented by both
transparent and source route bridges.ro Counter .1.3.6.1.4.1.207.8.33.10.1.4.1.6 |
atiL2BrStp OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.10.2 |
atiL2BrStpTableTable of bridge spanning tree information. SEQUENCE OF AtiL2BrStpEntry .1.3.6.1.4.1.207.8.33.10.2.1 |
atiL2BrStpEntryAn entry in the atiL2BrStpTable. AtiL2BrStpEntry .1.3.6.1.4.1.207.8.33.10.2.1.1 |
atiL2BrStpLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.1.1.1 |
atiL2BrStpProtocolSpecificationAn indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
future versions of the IEEE Spanning Tree Protocol
are released that are incompatible with the
current version a new value will be defined.ro Enumeration .1.3.6.1.4.1.207.8.33.10.2.1.1.2 |
atiL2BrStpPriorityThe value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
atiL2BrBaseBridgeAddress.rw INTEGER .1.3.6.1.4.1.207.8.33.10.2.1.1.3 |
atiL2BrStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.207.8.33.10.2.1.1.4 |
atiL2BrStpTopChangesThe total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.ro Counter .1.3.6.1.4.1.207.8.33.10.2.1.1.5 |
atiL2BrStpDesignatedRootThe bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.ro BridgeId .1.3.6.1.4.1.207.8.33.10.2.1.1.6 |
atiL2BrStpRootCostThe cost of the path to the root as seen from
this bridge.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.1.1.7 |
atiL2BrStpRootPortThe port number of the port which offers the
lowest cost path from this bridge to the root
bridge.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.1.1.8 |
atiL2BrStpMaxAgeThe maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
bridge is currently using.ro Timeout .1.3.6.1.4.1.207.8.33.10.2.1.1.9 |
atiL2BrStpHelloTimeThe amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using.ro Timeout .1.3.6.1.4.1.207.8.33.10.2.1.1.10 |
atiL2BrStpHoldTimeThis time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.1.1.11 |
atiL2BrStpForwardDelayThis time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database. [Note that
this value is the one that this bridge is
currently using, in contrast to
atiL2BrStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]ro Timeout .1.3.6.1.4.1.207.8.33.10.2.1.1.12 |
atiL2BrStpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atiL2BrStpBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.207.8.33.10.2.1.1.13 |
atiL2BrStpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted to a value
which is not a whole number of seconds.rw Timeout .1.3.6.1.4.1.207.8.33.10.2.1.1.14 |
atiL2BrStpBridgeForwardDelayThe value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
atiL2BrStpBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.rw Timeout .1.3.6.1.4.1.207.8.33.10.2.1.1.15 |
atiL2BrStpPortTableA table that contains port-specific information
for the Spanning Tree Protocol. SEQUENCE OF AtiL2BrStpPortEntry .1.3.6.1.4.1.207.8.33.10.2.15 |
atiL2BrStpPortEntryA list of information maintained by every port
about the Spanning Tree Protocol state for that
port. AtiL2BrStpPortEntry .1.3.6.1.4.1.207.8.33.10.2.15.1 |
atiL2BrStpPortLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.15.1.1 |
atiL2BrStpPortThe port number of the port for which this entry
contains Spanning Tree Protocol management
information.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.15.1.2 |
atiL2BrStpPortPriorityThe value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
atiL2BrStpPort.rw INTEGER .1.3.6.1.4.1.207.8.33.10.2.15.1.3 |
atiL2BrStpPortStateThe port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will place that
port into the broken(6) state. For ports which
are disabled (see atiL2BrStpPortEnable), this object
will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.207.8.33.10.2.15.1.4 |
atiL2BrStpPortEnableThe enabled/disabled status of the port.rw Enumeration .1.3.6.1.4.1.207.8.33.10.2.15.1.5 |
atiL2BrStpPortPathCostThe contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.rw INTEGER .1.3.6.1.4.1.207.8.33.10.2.15.1.6 |
atiL2BrStpPortDesignatedRootThe unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.ro BridgeId .1.3.6.1.4.1.207.8.33.10.2.15.1.7 |
atiL2BrStpPortDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.ro INTEGER .1.3.6.1.4.1.207.8.33.10.2.15.1.8 |
atiL2BrStpPortDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro BridgeId .1.3.6.1.4.1.207.8.33.10.2.15.1.9 |
atiL2BrStpPortDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.207.8.33.10.2.15.1.10 |
atiL2BrStpPortForwardTransitionsThe number of times this port has transitioned
from the Learning state to the Forwarding state.ro Counter .1.3.6.1.4.1.207.8.33.10.2.15.1.11 |
atiL2BrTp OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.10.3 |
atiL2BrTpTableTable of transparent bridging information. SEQUENCE OF AtiL2BrTpEntry .1.3.6.1.4.1.207.8.33.10.3.1 |
atiL2BrTpEntryAn entry in the atiL2BrTpTable. AtiL2BrTpEntry .1.3.6.1.4.1.207.8.33.10.3.1.1 |
atiL2BrTpLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.3.1.1.1 |
atiL2BrTpLearnedEntryDiscardsThe total number of Forwarding Database entries,
which have been or would have been learnt, but
have been discarded due to a lack of space to
store them in the Forwarding Database. If this
counter is increasing, it indicates that the
Forwarding Database is regularly becoming full (a
condition which has unpleasant performance effects
on the subnetwork). If this counter has a
significant value but is not presently increasing,
it indicates that the problem has been occurring
but is not persistent.ro Counter .1.3.6.1.4.1.207.8.33.10.3.1.1.2 |
atiL2BrTpAgingTimeThe timeout period in seconds for aging out
dynamically learned forwarding information.
802.1D-1990 recommends a default of 300 seconds.rw INTEGER .1.3.6.1.4.1.207.8.33.10.3.1.1.3 |
atiL2BrTpFdbTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame. SEQUENCE OF AtiL2BrTpFdbEntry .1.3.6.1.4.1.207.8.33.10.3.3 |
atiL2BrTpFdbEntryInformation about a specific unicast MAC address
for which the bridge has some forwarding and/or
filtering information. AtiL2BrTpFdbEntry .1.3.6.1.4.1.207.8.33.10.3.3.1 |
atiL2BrTpFdbLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.3.3.1.1 |
atiL2BrTpFdbAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.207.8.33.10.3.3.1.2 |
atiL2BrTpFdbPortEither the value '0', or the port number of the
port on which a frame having a source address
equal to the value of the corresponding instance
of atiL2BrTpFdbAddress has been seen. A value of
'0' indicates that the port number has not been
learned but that the bridge does have some
forwarding/filtering information about this
address .
Implementors are encouraged to assign the port
value to this object whenever it is learned even
for addresses for which the corresponding value of
atiL2BrTpFdbStatus is not learned(3).ro INTEGER .1.3.6.1.4.1.207.8.33.10.3.3.1.3 |
atiL2BrTpFdbStatusThe status of this entry.
The meanings of the values are:
inactive(1) : this entry is not longer valid
(e.g., it was learned but has since
aged-out), but has not yet been
flushed from the table.
active(2) : the value of the corresponding
instance of atiL2BrTpFdbPort was
active, and is being used.
other(3) : none of the following. This would
include the case where some other
MIB object (not the corresponding
instance of atiL2BrTpFdbPort ) is
being used to determine if and how
frames addressed to the value of
the corresponding instance of
atiL2BrTpFdbAddress are being
forwarded.ro Enumeration .1.3.6.1.4.1.207.8.33.10.3.3.1.4 |
atiL2BrTpPortTableA table that contains information about every
port that is associated with this transparent
bridge. SEQUENCE OF AtiL2BrTpPortEntry .1.3.6.1.4.1.207.8.33.10.3.4 |
atiL2BrTpPortEntryA list of information for each port of a
transparent bridge. AtiL2BrTpPortEntry .1.3.6.1.4.1.207.8.33.10.3.4.1 |
atiL2BrTpPortLanIdThis object uniquely identifies the lan or
Virtual lan.ro INTEGER .1.3.6.1.4.1.207.8.33.10.3.4.1.1 |
atiL2BrTpPortThe port number of the port for which this entry
contains Transparent bridging management
information.ro INTEGER .1.3.6.1.4.1.207.8.33.10.3.4.1.2 |
atiL2BrTpPortMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro INTEGER .1.3.6.1.4.1.207.8.33.10.3.4.1.3 |
atiL2BrTpPortInFramesThe number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter .1.3.6.1.4.1.207.8.33.10.3.4.1.4 |
atiL2BrTpPortOutFramesThe number of frames that have been transmitted
by this port to its segment. Note that a frame
transmitted on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames.ro Counter .1.3.6.1.4.1.207.8.33.10.3.4.1.5 |
atiL2BrTpPortInDiscardsCount of valid frames received which were
discarded (i.e., filtered) by the Forwarding
Process.ro Counter .1.3.6.1.4.1.207.8.33.10.3.4.1.6 |
atiL2TrapAttrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.11 |
atiL2TrapAttrModuleIdThis attribute is the Module Numver used when Traps pertinent
to Module is sent. INTEGER .1.3.6.1.4.1.207.8.33.11.1 |
atiL2TrapAttrPortIdThis attribute is the Port Number used when Traps pertinent to
Ports are sent. INTEGER .1.3.6.1.4.1.207.8.33.11.2 |
atiL2QOSConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.33.12 |
atiL2QOSStatusIf the QOS status is enabled, then QOS packets will
be assigned to high or low priority queue. If it is
disabled, packets works normally.(Applicable only to
at-8326GB, at-9410GB and at-8350GB)rw Enumeration .1.3.6.1.4.1.207.8.33.12.1 |
atiL2TrafficMappingTableIt contains the mapping of all traffic classes and
their priority assignments.(Applicable only to
at-8326GB, at-9410GB and at-8350GB) SEQUENCE OF AtiL2TrafficMappingEntry .1.3.6.1.4.1.207.8.33.12.2 |
atiL2TrafficMappingEntryEach entry maps a traffic class to the priority queue
to be used for it's packets. (Applicable only to
at-8326GB, at-9410GB and at-8350GB) AtiL2TrafficMappingEntry .1.3.6.1.4.1.207.8.33.12.2.1 |
atiL2TrafficClassIndexThe Index of the traffic class. It is obtained
from the packet format.(Applicable only to
at-8326GB, at-9410GB and at-8350GB)ro INTEGER .1.3.6.1.4.1.207.8.33.12.2.1.1 |
atiL2PriorityQueueThe priority queue to be used to forward packets.
(Applicable only to at-8326GB, at-9410GB and
at-8350GB)rw Enumeration .1.3.6.1.4.1.207.8.33.12.2.1.2 |