CENTRECOM-SYSTEM-MIB
The CENTRECOM-SYSTEM-MIB provides SNMP access to system-level management objects for Atkk (Centrecom) switches, enabling monitoring of device status, operational parameters, and hardware health metrics.
Imported Objects
Objects
22 total| Object Name |
|---|
atiSwitchSystemAtkk Switch System objects MODULE-IDENTITY .1.3.6.1.4.1.207.8.12.2.3 |
SNMPv2-SMIAtkk Switch System objects Unknown .1.3.6.1.4.1.207.8.12.2.3 |
atiSaveConfigurationWhen this object is set, the device will copy the contents
of the configuration database to a buffer and save it to the
persistant store specified by the value of the object. The
save is performed asynchronously, and the snmp agent will continue
to respond to both gets and sets while the save is taking
place. A network management application may use the
atiSaveStatus object to determine when the asynchronous
save operation has completed.rw Enumeration .1.3.6.1.4.1.207.8.12.2.3.3 |
atiSaveStatusThis object will return the status of a save operation invoked
by setting the atiSaveConfiguration object. A network
management application can read this object to determine that a
save operation has completed.ro Enumeration .1.3.6.1.4.1.207.8.12.2.3.4 |
atiCurrentConfigInUseShows which NVRAM configuration store was used at last bootro Enumeration .1.3.6.1.4.1.207.8.12.2.3.5 |
atiConfigToUseOnRebootControls which NVRAM configuration store will be used on next reboot.rw Enumeration .1.3.6.1.4.1.207.8.12.2.3.6 |
atiOverTemperatureAlarmAlarm status of overtemperature sensor in device
enclosure.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.12.2.3.7 |
atiCurrentTemperatureCurrent temperature in degrees celcius measured inside
device enclosure.ro INTEGER .1.3.6.1.4.1.207.8.12.2.3.8 |
atiFanStatusTableTable of operational status of all internal cooling fans. SEQUENCE OF AtiFanStatusEntry .1.3.6.1.4.1.207.8.12.2.3.9 |
atiFanStatusEntryEntry in table of all internal cooling fans. AtiFanStatusEntry .1.3.6.1.4.1.207.8.12.2.3.9.1 |
atiFanNumberIdentifier of cooling fan, numbered from the front and/or
left side of device.ro INTEGER .1.3.6.1.4.1.207.8.12.2.3.9.1.1 |
atiFanOperationalOperational status of a cooling fan.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.12.2.3.9.1.2 |
atiPrimaryPowerOperationalOperational status of internal power supply of a device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.12.2.3.10 |
atiRedundantPowerStatusOperational status of an external redundant power supply to a device.ro Enumeration .1.3.6.1.4.1.207.8.12.2.3.11 |
atiRedundantPowerAlarmAlarm state of an external redundant power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.12.2.3.12 |
atiPrimarySoftwareRevThe software revision of the primary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be reported in RMON2 probeSoftwareRev if this
is the software image currently running in the device.ro DisplayString .1.3.6.1.4.1.207.8.12.2.3.13 |
atiSecondarySoftwareRevThe software revision of the secondary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be reported in RMON2 probeSoftwareRev if this
is the software image currently running in the device.ro DisplayString .1.3.6.1.4.1.207.8.12.2.3.14 |
atiImageToUseOnRebootControls which image will be used
on next reboot.rw Enumeration .1.3.6.1.4.1.207.8.12.2.3.15 |
atiSystemIDThis represents the System ID of the Switch.ro DisplayString .1.3.6.1.4.1.207.8.12.2.3.16 |
atiSystemBoardIDThis represents the Board ID of the Switch.ro DisplayString .1.3.6.1.4.1.207.8.12.2.3.17 |
atiSystemLeftBoardIDThis represents the Left Board ID of the Summit Switch.ro DisplayString .1.3.6.1.4.1.207.8.12.2.3.18 |
atiSystemRightBoardIDThis represents the Right Board ID of the Summit Switch.ro DisplayString .1.3.6.1.4.1.207.8.12.2.3.19 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.