AT-IP-MIB
The AT-IP-MIB module enables monitoring and management of IP layer statistics, interface states, and routing table entries on Allied Telesis network devices via SNMP. It provides access to standard IP metrics such as packet counts, error rates, and address table entries to facilitate network performance analysis and fault isolation.
Imported Objects
Objects
10 total| Object Name |
|---|
atIpMibThe IP MIB - for AT specific IP management. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.4.602 |
atIpAddressTableA table containing mappings between primary/secondary IP addresses, and the interfaces they are assigned to. SEQUENCE OF AtIpAddressEntry .1.3.6.1.4.1.207.8.4.4.4.602.1 |
atIpAddressEntryAn address mapping for a particular interface. AtIpAddressEntry .1.3.6.1.4.1.207.8.4.4.4.602.1.1 |
atIpAddressAddrTypeAn indication of the IP version of atIpAddressAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.207.8.4.4.4.602.1.1.1 |
atIpAddressAddrThe IP address to which this entry's addressing information pertains. The address type of this object is specified in atIpAddressAddrType. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.207.8.4.4.4.602.1.1.2 |
atIpAddressPrefixLenThe prefix length of the IP address represented by this entry.rw INTEGER .1.3.6.1.4.1.207.8.4.4.4.602.1.1.3 |
atIpAddressLabelA name assigned to the IP address represented by this entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.602.1.1.4 |
atIpAddressIfIndexThe index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.207.8.4.4.4.602.1.1.5 |
atIpAddressAssignmentTypeThe IP address assignment type for this entry (primary or secondary).rw AtIpAddressAssignmentType .1.3.6.1.4.1.207.8.4.4.4.602.1.1.6 |
atIpAddressRowStatusThe current status of the IP address entry. The following values may be returned when reading this object: active (1) - The IP address is currently mapped to an interface and is valid. notReady (3) - The IP address is currently partially configured and is not mapped to an interface. The following values may be written to this object: active (1) - An attempt will be made to map the IP address to the configured interface. createAndWait (5) - An attempt will be made to create a new IP address entry. destroy (6) - The IP address setting will be removed from the device. An entry cannot be made active until its atIpAddressPrefixLen, atIpAddressIfIndex and atIpAddressAssignmentType objects have been set to valid values.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.602.1.1.7 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.