SHIVA-FLASH-MIB
Standard SNMP MIB module defining data structures for SHIVA-FLASH-MIB.
Imported Objects
Objects
8 total| Object Name |
|---|
IMPORTSThe size of the flash in bytes.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.1 |
flashAvailableThe number of bytes available in flash. Note that
the flash uses a block structure, so it cannot be
used at 100% efficiency.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.2 |
flashComponentTableA table of flash components. SEQUENCE OF FlashComponentEntry .1.3.6.1.4.1.207.8.4.4.4.31.3 |
flashComponentEntryFlash component information. FlashComponentEntry .1.3.6.1.4.1.207.8.4.4.4.31.3.1 |
flashComponentIndexFlash component index.ro INTEGER .1.3.6.1.4.1.207.8.4.4.4.31.3.1.1 |
flashComponentNameFlash component name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.31.3.1.2 |
flashComponentRevFlash component revision.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.31.3.1.3 |
flashComponentFileNameFlash component filename from rev.c.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.31.3.1.4 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.