AT-ENVMONv2-MIB
AI MIB Summary
The AT-ENVMONv2-MIB enables SNMP-based monitoring of specific hardware telemetry on Allied Telesis network infrastructure, tracking voltage rails, fan speeds, temperature sensors, and power supply unit status.
The AT Environment Monitoring v2 MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units.
Main OID:
atEnvMonv2.1.3.6.1.4.1.207.8.4.4.3.12
74
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
atEnvMonv2The AT Environment Monitoring v2 MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.3.12 |
atEnvMonv2Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.3.12.0 |
atEnvMonv2FanAlarmSetNotifyA notification generated when the monitored speed of a fan drops below its lower threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.1 |
atEnvMonv2FanAlarmClearedNotifyA notification generated when the monitored speed of a fan returns to an acceptable value, the fan having previously been in an alarm condition. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.2 |
atEnvMonv2VoltAlarmSetNotifyA notification generated when the voltage of a monitored voltage rail goes out of tolerance, either by dropping below its lower threshold, or exceeding its upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.3 |
atEnvMonv2VoltAlarmClearedNotifyA notification generated when the voltage of a monitored voltage rail returns to an acceptable value, having previously been in an alarm condition. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.4 |
atEnvMonv2TempAlarmSetNotifyA notification generated when a monitored temperature exceeds its upper threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.5 |
atEnvMonv2TempAlarmClearedNotifyA notification generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.6 |
atEnvMonv2PsbAlarmSetNotifyA notification generated when a monitored parameter of a power supply bay device goes out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.7 |
atEnvMonv2PsbAlarmClearedNotifyA notification generated when a monitored parameter of a power supply bay device returns to an acceptable value, having previously been in an alarm condition. NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.0.8 |
atEnvMonv2FanTableA table of information about fans installed in the device that have their fan speeds monitored by environment monitoring hardware. SEQUENCE OF AtEnvMonv2FanEntry .1.3.6.1.4.1.207.8.4.4.3.12.1 |
atEnvMonv2FanEntryThe description, current speed, lower threshold speed and current status of a fan. AtEnvMonv2FanEntry .1.3.6.1.4.1.207.8.4.4.3.12.1.1 |
atEnvMonv2FanStackMemberIdThe index of the stack member hosting this fan. For a chassis switch, it corresponds to the card ID of the active controller.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.1 |
atEnvMonv2FanBoardIndexThe index of the board hosting this fan in the board table.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.2 |
atEnvMonv2FanIndexThe numeric identifier of this fan on its host board.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.3 |
atEnvMonv2FanDescriptionThe description of this fan.ro DisplayStringUnsized .1.3.6.1.4.1.207.8.4.4.3.12.1.1.4 |
atEnvMonv2FanCurrentSpeedThe current speed of this fan in revolutions per minute.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.5 |
atEnvMonv2FanLowerThresholdThe minimum acceptable speed of the fan in revolutions per minute.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.1.1.6 |
atEnvMonv2FanStatusAn indication of whether this fan is currently in an alarm condition. A value of 'failed' indicates that its current speed is too low, 'good' indicates that the current speed is acceptable.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.1.1.7 |
atEnvMonv2VoltageTableA table of information about voltage rails in the device that are monitored by environment monitoring hardware. SEQUENCE OF AtEnvMonv2VoltageEntry .1.3.6.1.4.1.207.8.4.4.3.12.2 |
atEnvMonv2VoltageEntryThe description, current value, upper & lower threshold settings and current status of a voltage rail. AtEnvMonv2VoltageEntry .1.3.6.1.4.1.207.8.4.4.3.12.2.1 |
atEnvMonv2VoltageStackMemberIdThe index of the stack member hosting this voltage sensor. For a chassis switch, it corresponds to the card ID of the active controller.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.1 |
atEnvMonv2VoltageBoardIndexThe index of the board hosting this voltage sensor in the board table.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.2 |
atEnvMonv2VoltageIndexThe numeric identifier of this voltage rail on its host board.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.2.1.3 |
atEnvMonv2VoltageDescriptionThe description of this voltage rail.ro DisplayStringUnsized .1.3.6.1.4.1.207.8.4.4.3.12.2.1.4 |
atEnvMonv2VoltageCurrentThe current reading of this voltage rail in millivolts.ro INTEGER .1.3.6.1.4.1.207.8.4.4.3.12.2.1.5 |
atEnvMonv2VoltageUpperThresholdThe maximum acceptable reading of this voltage rail in millivolts.ro INTEGER .1.3.6.1.4.1.207.8.4.4.3.12.2.1.6 |
atEnvMonv2VoltageLowerThresholdThe minimum acceptable reading of this voltage rail in millivolts.ro INTEGER .1.3.6.1.4.1.207.8.4.4.3.12.2.1.7 |
atEnvMonv2VoltageStatusAn indication of whether this voltage rail is currently in an alarm condition. A value of 'outOfRange' indicates that its current reading is outside its threshold range, 'inRange' indicates that the current reading is acceptable.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.2.1.8 |
atEnvMonv2TemperatureTableA table of information about temperature sensors in the device that are monitored by environment monitoring hardware. SEQUENCE OF AtEnvMonv2TemperatureEntry .1.3.6.1.4.1.207.8.4.4.3.12.3 |
atEnvMonv2TemperatureEntryThe description, current value, upper threshold setting and current status of a temperature sensor. AtEnvMonv2TemperatureEntry .1.3.6.1.4.1.207.8.4.4.3.12.3.1 |
atEnvMonv2TemperatureStackMemberIdThe index of the stack member hosting this temperature sensor. For a chassis switch, it corresponds to the card ID of the active controller.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.1 |
atEnvMonv2TemperatureBoardIndexThe index of the board hosting this temperature sensor in the board table.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.2 |
atEnvMonv2TemperatureIndexThe numeric identifier of this temperature sensor on its host board.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.3.1.3 |
atEnvMonv2TemperatureDescriptionThe description of this temperature sensor.ro DisplayStringUnsized .1.3.6.1.4.1.207.8.4.4.3.12.3.1.4 |
atEnvMonv2TemperatureCurrentThe current reading of this temperature sensor in tenths of a degree Celsius.ro INTEGER .1.3.6.1.4.1.207.8.4.4.3.12.3.1.5 |
atEnvMonv2TemperatureUpperThresholdThe maximum acceptable reading of this temperature sensor in tenths of a degree Celsius.ro INTEGER .1.3.6.1.4.1.207.8.4.4.3.12.3.1.6 |
atEnvMonv2TemperatureStatusAn indication of whether this temperature sensor is currently in an alarm condition. A value of 'outOfRange' indicates that its current reading is outside its threshold range, 'inRange' indicates that the current reading is acceptable.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.3.1.7 |
atEnvMonv2PsbObjects OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.3.12.4 |
atEnvMonv2PsbTableA table of information about power supply bays in the system and any devices that are installed. SEQUENCE OF AtEnvMonv2PsbEntry .1.3.6.1.4.1.207.8.4.4.3.12.4.1 |
atEnvMonv2PsbEntryThe description and current status of a power supply bay device. AtEnvMonv2PsbEntry .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1 |
atEnvMonv2PsbHostStackMemberIdThe index of the stack member hosting this power supply bay. For a chassis switch, it corresponds to the card ID of the active controller.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.1 |
atEnvMonv2PsbHostBoardIndexThe index of the board hosting this power supply bay in the board table.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.2 |
atEnvMonv2PsbHostSlotIndexThe index of this power supply bay on its host board. This index is fixed for each slot, on each type of board.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.3 |
atEnvMonv2PsbHeldBoardIndexThe index of a board installed in this power supply bay. This value corresponds to atEnvMonv2PsbSensorBoardIndex for each sensor on this board. A value of 0 indicates that a board is is either not present or not supported.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.4 |
atEnvMonv2PsbHeldBoardIdThe type of board installed in this power supply bay. The values of this object are taken from the pprXxx object IDs under the boards sub-tree in the parent MIB. A value of 0 indicates that a board is either not present or not supported.ro OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.5 |
atEnvMonv2PsbDescriptionThe description of this power supply bay.ro DisplayStringUnsized .1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.6 |
atEnvMonv2PsbSensorTableA table of information about environment monitoring sensors on devices installed in power supply bays. SEQUENCE OF AtEnvMonv2PsbSensorEntry .1.3.6.1.4.1.207.8.4.4.3.12.4.2 |
atEnvMonv2PsbSensorEntryThe description and current status of a device installed in a power supply bay. AtEnvMonv2PsbSensorEntry .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1 |
atEnvMonv2PsbSensorStackMemberIdThe index of the stack member hosting this sensor. For a chassis switch, it corresponds to the card ID of the active controller.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.1 |
atEnvMonv2PsbSensorBoardIndexThe index of the board hosting this sensor in the board table.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.2 |
atEnvMonv2PsbSensorIndexThe index of this power supply bay environmental sensor on its host board.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.3 |
atEnvMonv2PsbSensorTypeThe type of environmental variable this sensor detects.ro AtEnvMonv2PsbSensorType .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.4 |
atEnvMonv2PsbSensorDescriptionThe description of this power supply bay environmental sensor.ro DisplayStringUnsized .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.5 |
atEnvMonv2PsbSensorStatusAn indication of whether this environmental sensor is currently in an alarm condition. A value of 'failed' indicates that the device is in a failure condition, 'good' indicates that the device is functioning normally.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.6 |
atEnvMonv2PsbSensorReadingAn indication of whether this environmental sensor is currently reading a value for the monitored device. A value of 'no' indicates that there is no current reading, 'yes' indicates that the monitored device is supplying a reading.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.7 |
atEnvMonv2Traps OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.3.12.5 |
atEnvMonv2FanAlarmSetEventA trap generated when the monitored speed of a fan drops below its lower threshold.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.1 |
atEnvMonv2FanAlarmClearedEventA trap generated when the monitored speed of a fan returns to an acceptable value, the fan having previously been in an alarm condition.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.2 |
atEnvMonv2VoltAlarmSetEventA trap generated when the voltage of a monitored voltage rail goes out of tolerance, either by dropping below its lower threshold, or exceeding its upper threshold.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.3 |
atEnvMonv2VoltAlarmClearedEventA trap generated when the voltage of a monitored voltage rail returns to an acceptable value, having previously been in an alarm condition.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.4 |
atEnvMonv2TempAlarmSetEventA trap generated when a monitored temperature exceeds its upper threshold.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.5 |
atEnvMonv2TempAlarmClearedEventA trap generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.6 |
atEnvMonv2PsbAlarmSetEventA trap generated when a monitored parameter of a power supply bay device goes out of tolerance.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.7 |
atEnvMonv2PsbAlarmClearedEventA trap generated when a monitored parameter of a power supply bay device returns to an acceptable value, having previously been in an alarm condition.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.207.8.4.4.3.12.5.8 |
atEnvMonv2FaultLedTableA table of information detailing any LED fault indications on the device. SEQUENCE OF AtEnvMonv2FaultLedEntry .1.3.6.1.4.1.207.8.4.4.3.12.6 |
atEnvMonv2FaultLedEntryAn entry pertaining to a given fault LED. AtEnvMonv2FaultLedEntry .1.3.6.1.4.1.207.8.4.4.3.12.6.1 |
atEnvMonv2FaultLedStackMemberIdThe index of the stack member hosting this fault LED. For a chassis switch, it corresponds to the card ID of the active controller.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.12.6.1.1 |
atEnvMonv2FaultLed1FlashThis object indicates whether a fault LED is currently showing a system failure by flashing once. It indicates that one or more heatsink fans have failed, or are operating below the recommended speed.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.6.1.2 |
atEnvMonv2FaultLed2FlashesThis object indicates whether a fault LED is currently showing a system failure by flashing twice. It indicates that one or both of the chassis fans are not installed, or the fans are operating below the recommended speed.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.6.1.3 |
atEnvMonv2FaultLed3FlashesThis object indicates whether a fault LED is currently showing a system failure by flashing three times. It indicates that the ability to monitor temperature or fans has failed.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.6.1.4 |
atEnvMonv2FaultLed4FlashesThis object indicates whether a fault LED is currently showing a system failure by flashing four times. It indicates that an XEM failed to initialise or is incompatible.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.6.1.5 |
atEnvMonv2FaultLed5FlashesThis object indicates whether a fault LED is currently showing a system failure by flashing five times. This flashing sequence is not currently in use.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.6.1.6 |
atEnvMonv2FaultLed6FlashesThis object indicates whether a fault LED is currently showing a system failure by flashing six times. It indicates that the device's temperature has exceeded the recommended threshold.ro Enumeration .1.3.6.1.4.1.207.8.4.4.3.12.6.1.7 |