AT-PTP-MIB
AI MIB Summary
The AT-PTP-MIB module enables the monitoring and management of IEEE 1588v2 Precision Time Protocol (PTP) state variables, clock synchronization status, and grandmaster selection metrics on Allied Telesis network devices. It facilitates the tracking of PTP session counts, clock quality levels, and delay measurement statistics to ensure precise time synchronization across the network infrastructure.
This MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module.
Main OID:
atPtpMIB.1.3.6.1.4.1.207.8.4.4.4.504
179
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
atPtpMIBThis MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.4.504 |
ptpMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.0 |
ptpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1 |
ptpMIBSystemInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.1 |
ptpSystemTableTable of count information about the PTP system for all domains. SEQUENCE OF PtpSystemEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.1.1 |
ptpSystemEntryAn entry in the table, containing count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes it. PtpSystemEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1 |
ptpDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1.1 |
ptpInstanceIndexThis object specifies the instance of the Clock for this domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1.2 |
ptpDomainClockPortsTotalThis object specifies the total number of clock ports configured within a domain in the system.ro Gauge32 UNITS "ptp ports" .1.3.6.1.4.1.207.8.4.4.4.504.1.1.1.1.3 |
ptpSystemDomainTableTable of information about the PTP system for all clock modes -- ordinary, boundary or transparent. SEQUENCE OF PtpSystemDomainEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.1.2 |
ptpSystemDomainEntryAn entry in the table, containing information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node. PtpSystemDomainEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.1.2.1 |
ptpSystemDomainClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.1.2.1.1 |
ptpSystemDomainTotalsThis object specifies the total number of PTP domains for this particular clock type configured in this node.ro Unsigned32 UNITS "domains" .1.3.6.1.4.1.207.8.4.4.4.504.1.1.2.1.2 |
ptpSystemProfileThis object specifies the PTP Profile implemented on the system.ro PtpClockProfileType .1.3.6.1.4.1.207.8.4.4.4.504.1.1.3 |
ptpMIBClockInfo OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2 |
ptpClockCurrentDSTableTable of information about the PTP clock Current Datasets for all domains. SEQUENCE OF PtpClockCurrentDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1 |
ptpClockCurrentDSEntryAn entry in the table, containing information about a single PTP clock Current Datasets for a domain. PtpClockCurrentDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1 |
ptpClockCurrentDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.1 |
ptpClockCurrentDSClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.2 |
ptpClockCurrentDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.3 |
ptpClockCurrentDSStepsRemovedThe current clock dataset StepsRemoved value. This object specifies the distance measured by the number of Boundary clocks between the local clock and the Foreign master as indicated in the stepsRemoved field of Announce messages.ro Unsigned32 UNITS "Steps" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.4 |
ptpClockCurrentDSOffsetFromMasterThis object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.5 |
ptpClockCurrentDSMeanPathDelayThis object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.1.1.6 |
ptpClockParentDSTableTable of information about the PTP clock Parent Datasets for all domains. SEQUENCE OF PtpClockParentDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2 |
ptpClockParentDSEntryAn entry in the table, containing information about a single PTP clock Parent Datasets for a domain. PtpClockParentDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1 |
ptpClockParentDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.1 |
ptpClockParentDSClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.2 |
ptpClockParentDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.3 |
ptpClockParentDSParentPortIdentityThis object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock.ro OCTET STRING .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.4 |
ptpClockParentDSParentStatsThis object specifies the Parent Dataset ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.5 |
ptpClockParentDSOffsetThis object specifies the Parent Dataset ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock.ro PtpClockIntervalBase2 (-128..127) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.6 |
ptpClockParentDSClockPhChRateThis object specifies the clock's parent dataset ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.7 |
ptpClockParentDSGMClockIdentityThis object specifies the parent dataset Grandmaster clock identity.ro PtpClockIdentity .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.8 |
ptpClockParentDSGMClockPriority1This object specifies the parent dataset Grandmaster clock priority1.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.9 |
ptpClockParentDSGMClockPriority2This object specifies the parent dataset grandmaster clock priority2.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.10 |
ptpClockParentDSGMClockQualityClassThis object specifies the parent dataset grandmaster clock quality class.ro PtpClockQualityClassType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.11 |
ptpClockParentDSGMClockQualityAccuracyThis object specifies the parent dataset grandmaster clock quality accuracy.ro PtpClockQualityAccuracyType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.12 |
ptpClockParentDSGMClockQualityOffsetThis object specifies the parent dataset grandmaster clock quality offset.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.2.1.13 |
ptpClockDefaultDSTableTable of information about the PTP clock Default Datasets for all domains. SEQUENCE OF PtpClockDefaultDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3 |
ptpClockDefaultDSEntryAn entry in the table, containing information about a single PTP clock Default Datasets for a domain. PtpClockDefaultDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1 |
ptpClockDefaultDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.1 |
ptpClockDefaultDSClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.2 |
ptpClockDefaultDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.3 |
ptpClockDefaultDSTwoStepFlagThis object specifies whether the Two Step process is used.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.4 |
ptpClockDefaultDSClockIdentityThis object specifies the default Datasets clock identity.ro PtpClockIdentity .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.5 |
ptpClockDefaultDSPriority1This object specifies the default Datasets clock Priority1.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.6 |
ptpClockDefaultDSPriority2This object specifies the default Datasets clock Priority2.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.7 |
ptpClockDefaultDSSlaveOnlyWhether the SlaveOnly flag is set.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.8 |
ptpClockDefaultDSQualityClassThis object specifies the default dataset Quality Class.ro PtpClockQualityClassType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.9 |
ptpClockDefaultDSQualityAccuracyThis object specifies the default dataset Quality Accuracy.ro PtpClockQualityAccuracyType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.10 |
ptpClockDefaultDSQualityOffsetThis object specifies the default dataset Quality offset.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.3.1.11 |
ptpClockRunningTableTable of information about the PTP clock Running Datasets for all domains. SEQUENCE OF PtpClockRunningEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4 |
ptpClockRunningEntryAn entry in the table, containing information about a single PTP clock running Datasets for a domain. PtpClockRunningEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1 |
ptpClockRunningDomainIndexThis object specifies the domain number used to create a Logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.1 |
ptpClockRunningClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.2 |
ptpClockRunningInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.3 |
ptpClockRunningStateThis object specifies the Clock state returned by a PTP engine which was described earlier. Freerun state. Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting any PTP packets from the master, or because of some other input error (erroneous packets, etc). Holdover state. In this state the slave device is locked to a master but communication with the master has been lost or the timestamps in the PTP packets are incorrect. Since the slave was previously locked to the master, it can run in this state, with similar accuracy for some time. If communication with the master is not restored for an extended period (dependent on the clock implementation), the device should move to the FREERUN state. Acquiring state. The slave device is receiving packets from a master and is trying to acquire a lock. Freq_locked state. Slave device is locked to the Master with respect to frequency, but not phase aligned. Phase_aligned state. Locked to the master with respect to frequency and phase.ro PtpClockStateType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.4 |
ptpClockRunningPacketsSentThis object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous.ro Counter64 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.5 |
ptpClockRunningPacketsReceivedThis object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous.ro Counter64 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.4.1.6 |
ptpClockTimePropertiesDSTableTable of information about the PTP clock time properties datasets for all domains. SEQUENCE OF PtpClockTimePropertiesDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5 |
ptpClockTimePropertiesDSEntryAn entry in the table, containing information about a single PTP clock timeproperties Datasets for a domain. PtpClockTimePropertiesDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1 |
ptpClockTimePropertiesDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.1 |
ptpClockTimePropertiesDSClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.2 |
ptpClockTimePropertiesDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.3 |
ptpClockTimePropertiesDSCurrentUTCOffsetValidThis object specifies the timeproperties dataset value of whether the current UTC offset is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.4 |
ptpClockTimePropertiesDSCurrentUTCOffsetThis object specifies the timeproperties dataset value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise the value has no meaning. The value shall be in units of seconds. The initialization value shall be selected as follows: a) If the timePropertiesDS.ptpTimescale (see 8.2.4.8) is TRUE, the value is the value obtained from a primary reference if the value is known at the time of initialization, else, b) The value shall be the current number of leap seconds (7.2.3) when the node is designed.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.5 |
ptpClockTimePropertiesDSLeap59This object specifies the Leap59 value in the clock Current Dataset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.6 |
ptpClockTimePropertiesDSLeap61This object specifies the Leap61 value in the clock Current Dataset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.7 |
ptpClockTimePropertiesDSTimeTraceableThis object specifies the Time Traceable value in the clock Current Dataset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.8 |
ptpClockTimePropertiesDSFreqTraceableThis object specifies the Frequency Traceable value in the clock Current Dataset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.9 |
ptpClockTimePropertiesDSPTPTimescaleThis object specifies the PTP Timescale value in the clock Current Dataset.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.10 |
ptpClockTimePropertiesDSSourceThis object specifies the Timesource value in the clock Current Dataset.ro PtpClockTimeSourceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.5.1.11 |
ptpClockTransDefaultDSTableTable of information about the PTP Transparent clock Default Datasets for all domains. SEQUENCE OF PtpClockTransDefaultDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6 |
ptpClockTransDefaultDSEntryAn entry in the table, containing information about a single PTP Transparent clock Default Datasets for a domain. PtpClockTransDefaultDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1 |
ptpClockTransDefaultDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.1 |
ptpClockTransDefaultDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.2 |
ptpClockTransDefaultDSClockIdentityThis object specifies the value of the clockIdentity attribute of the local clock.ro PtpClockIdentity .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.3 |
ptpClockTransDefaultDSNumOfPortsThis object specifies the number of PTP ports of the device. These counters are discontinuous.ro Counter32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.4 |
ptpClockTransDefaultDSDelayThis object, if the transparent clock is an end-to-end transparent clock, has the value of E2E; if the transparent clock is a peer-to-peer transparent clock, the value shall be P2P.ro PtpClockMechanismType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.5 |
ptpClockTransDefaultDSPrimaryDomainThis object specifies the value of the primary syntonization domain. The initialization value shall be 0.ro PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.6.1.6 |
ptpClockPortTableTable of information about the clock ports for a particular domain. SEQUENCE OF PtpClockPortEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7 |
ptpClockPortEntryAn entry in the table, containing information about a single clock port. PtpClockPortEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1 |
ptpClockPortDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.1 |
ptpClockPortClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.2 |
ptpClockPortClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.3 |
ptpClockPortTablePortNumberIndexThis object specifies the PTP Portnumber for this port. PtpClockPortNumber .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.4 |
ptpClockPortNameThis object specifies the PTP clock port name configured on the node.ro DisplayString .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.5 |
ptpClockPortRoleThis object describes the current role (slave/master) of the port.ro PtpClockRoleType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.6 |
ptpClockPortSyncTwoStepThis object specifies that two-step clock operation between the PTP master and slave device is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.7 |
ptpClockPortCurrentPeerAddressTypeThis object specifies the current peer's network address type used for PTP communication.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.8 |
ptpClockPortCurrentPeerAddressThis object specifies the current peer's network address used for PTP communication.ro PtpClockPortTransportTypeAddress .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.9 |
ptpClockPortNumOfAssociatedPortsThis object specifies - For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered).ro Gauge32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.7.1.10 |
ptpClockPortDSTableTable of information about the clock ports dataset for a particular domain. SEQUENCE OF PtpClockPortDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8 |
ptpClockPortDSEntryAn entry in the table, containing port dataset information for a single clock port. PtpClockPortDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1 |
ptpClockPortDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.1 |
ptpClockPortDSClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.2 |
ptpClockPortDSClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.3 |
ptpClockPortDSPortNumberIndexThis object specifies the PTP portnumber associated with this PTP port. PtpClockPortNumber .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.4 |
ptpClockPortDSNameThis object specifies the PTP clock port dataset name.ro DisplayString .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.5 |
ptpClockPortDSPortIdentityThis object specifies the PTP clock port Identity.ro OCTET STRING .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.6 |
ptpClockPortDSlogAnnouncementIntervalThis object specifies the Announce message transmission interval associated with this clock port.ro PtpClockIntervalBase2 UNITS "Time Interval" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.7 |
ptpClockPortDSAnnounceRctTimeoutThis object specifies the Announce receipt timeout associated with this clock port.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.8 |
ptpClockPortDSlogSyncIntervalThis object specifies the Sync message transmission interval.ro PtpClockIntervalBase2 UNITS "Time Interval" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.9 |
ptpClockPortDSMinDelayReqIntervalThis object specifies the Delay_Req message transmission interval.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.10 |
ptpClockPortDSPeerDelayReqIntervalThis object specifies the Pdelay_Req message transmission interval.ro Integer32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.11 |
ptpClockPortDSDelayMechThis object specifies the delay mechanism used. If the clock is an end-to-end clock, the value of the is e2e, else if the clock is a peer to-peer clock, the value shall be p2p.ro PtpClockMechanismType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.12 |
ptpClockPortDSPeerMeanPathDelayThis object specifies the peer meanPathDelay.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.13 |
ptpClockPortDSGrantDurationThis object specifies the grant duration allocated by the master.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.14 |
ptpClockPortDSPTPVersionThis object specifies the PTP version being used.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.8.1.15 |
ptpClockPortRunningTableTable of information about the clock ports running datasets for a particular domain. SEQUENCE OF PtpClockPortRunningEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9 |
ptpClockPortRunningEntryAn entry in the table, containing running dataset information about a single clock port. PtpClockPortRunningEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1 |
ptpClockPortRunningDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.1 |
ptpClockPortRunningClockTypeIndexThis object specifies the clock type as defined in the Textual convention description. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.2 |
ptpClockPortRunningClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.3 |
ptpClockPortRunningPortNumberIndexThis object specifies the PTP portnumber associated with this clock port. PtpClockPortNumber .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.4 |
ptpClockPortRunningNameThis object specifies the PTP clock port name.ro DisplayString .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.5 |
ptpClockPortRunningStateThis object specifies the port state returned by PTP engine. initializing - In this state a port initializes its data sets, hardware, and communication facilities. faulty - The fault state of the protocol. disabled - The port shall not place any messages on its communication path. listening - The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master. preMaster - The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling, or management messages. master - The port is behaving as a master port. passive - The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message uncalibrated - The local port is preparing to synchronize to the master port. slave - The port is synchronizing to the selected master port.ro PtpClockPortState .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.6 |
ptpClockPortRunningRoleThis object specifies the Clock Role.ro PtpClockRoleType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.7 |
ptpClockPortRunningInterfaceIndexThis object specifies the interface on the node being used by the PTP Clock for PTP communication.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.8 |
ptpClockPortRunningTransportThis object specifies the transport protocol being used for PTP communication (the mapping used).ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.9 |
ptpClockPortRunningEncapsulationTypeThis object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN, Pseudowire encapsulation...) for the PTP messages.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.10 |
ptpClockPortRunningTxModeThis object specifies the clock transmission mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channelro PtpClockTxModeType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.11 |
ptpClockPortRunningRxModeThis object specifies the clock receive mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channelro PtpClockTxModeType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.12 |
ptpClockPortRunningPacketsReceivedThis object specifies the packets received on the clock port (cumulative). These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.13 |
ptpClockPortRunningPacketsSentThis object specifies the packets sent on the clock port (cumulative). These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.9.1.14 |
ptpClockPortTransDSTableTable of information about the Transparent clock ports running dataset for a particular domain. SEQUENCE OF PtpClockPortTransDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10 |
ptpClockPortTransDSEntryAn entry in the table, containing clock port Transparent dataset information about a single clock port PtpClockPortTransDSEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1 |
ptpClockPortTransDSDomainIndexThis object specifies the domain number used to create a Logical group of PTP devices. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.1 |
ptpClockPortTransDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.2 |
ptpClockPortTransDSPortNumberIndexThis object specifies the PTP port number associated with this port. PtpClockPortNumber .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.3 |
ptpClockPortTransDSPortIdentityThis object specifies the value of the PortIdentity attribute of the local port.ro PtpClockIdentity .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.4 |
ptpClockPortTransDSlogMinPdelayReqIntThis object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval.ro PtpClockIntervalBase2 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.5 |
ptpClockPortTransDSFaultyFlagThis object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.6 |
ptpClockPortTransDSPeerMeanPathDelayThis object specifies, if the delayMechanism used is P2P, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is E2E, then the value will be zero.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.10.1.7 |
ptpClockPortAssociateTableTable of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario. SEQUENCE OF PtpClockPortAssociateEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11 |
ptpClockPortAssociateEntryAn entry in the table, containing information about a single associated port for the given clockport. PtpClockPortAssociateEntry .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1 |
ptpClockPortCurrentDomainIndexThis object specifies the given port's domain number. PtpClockDomainType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.1 |
ptpClockPortCurrentClockTypeIndexThis object specifies the given port's clock type. PtpClockType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.2 |
ptpClockPortCurrentClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.3 |
ptpClockPortCurrentPortNumberIndexThis object specifies the PTP Port Number for the given port. PtpClockPortNumber .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.4 |
ptpClockPortAssociatePortIndexThis object specifies the associated port's serial number in the current port's context. Unsigned32 .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.5 |
ptpClockPortAssociateAddressTypeThis object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpWellKnownTransportTypes will be used in the values contained in the OCTET STRING.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.6 |
ptpClockPortAssociateAddressThis object specifies the peer port's network address used for PTP communication.ro PtpClockPortTransportTypeAddress .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.7 |
ptpClockPortAssociatePacketsSentThe number of packets sent to this peer port from the current port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.8 |
ptpClockPortAssociatePacketsReceivedThe number of packets received from this peer port by the current port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.9 |
ptpClockPortAssociateInErrorsThis object specifies the input errors associated with the peer port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.10 |
ptpClockPortAssociateOutErrorsThis object specifies the output errors associated with the peer port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.4.1.207.8.4.4.4.504.1.2.11.1.11 |
ptpWellKnownTransportTypes OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12 |
ptpTransportTypeIPversion4IP version 4 OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.1 |
ptpTransportTypeIPversion6IP version 6 OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.2 |
ptpTransportTypeEthernetEthernet OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.3 |
ptpTransportTypeDeviceNETDevice NET OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.4 |
ptpTransportTypeControlNETControl NET OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.5 |
ptpTransportTypeIEC61158IEC61158 OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.12.6 |
ptpWellKnownEncapsulationTypes OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.13 |
ptpEncapsulationTypeEthernetEthernet Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.1 |
ptpEncapsulationTypeVLANVLAN Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.2 |
ptpEncapsulationTypeUDPIPLSPUDP/IP over MPLS Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.3 |
ptpEncapsulationTypePWUDPIPLSPUDP/IP Pseudowire over MPLS Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.4 |
ptpEncapsulationTypePWEthernetLSPEthernet Pseudowire over MPLS Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.1.2.13.5 |
ptpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.2 |
ptpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.2.1 |
ptpMIBCompliancesSystemInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide system level information of clock devices. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.1.1 |
ptpMIBCompliancesClockInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.1.2 |
ptpMIBCompliancesClockPortInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock port related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.1.3 |
ptpMIBCompliancesTransparentClockInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide Transparent clock related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.1.4 |
ptpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.207.8.4.4.4.504.2.2 |
ptpMIBSystemInfoGroupGroup which aggregates objects describing system-wide information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.1 |
ptpMIBClockCurrentDSGroupGroup which aggregates objects describing PTP Current Dataset information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.2 |
ptpMIBClockParentDSGroupGroup which aggregates objects describing PTP Parent Dataset information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.3 |
ptpMIBClockDefaultDSGroupGroup which aggregates objects describing PTP Default Dataset information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.4 |
ptpMIBClockRunningGroupGroup which aggregates objects describing PTP running state information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.5 |
ptpMIBClockTimepropertiesGroupGroup which aggregates objects describing PTP Time Properties information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.6 |
ptpMIBClockTranparentDSGroupGroup which aggregates objects describing PTP Transparent Dataset information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.7 |
ptpMIBClockPortGroupGroup which aggregates objects describing information for a given PTP Port. Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.8 |
ptpMIBClockPortDSGroupGroup which aggregates objects describing PTP Port Dataset information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.9 |
ptpMIBClockPortRunningGroupGroup which aggregates objects describing PTP running interface information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.10 |
ptpMIBClockPortTransDSGroupGroup which aggregates objects describing PTP TransparentDS information Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.11 |
ptpMIBClockPortAssociateGroupGroup which aggregates objects describing information on peer PTP ports for a given PTP clock-port. Unknown .1.3.6.1.4.1.207.8.4.4.4.504.2.2.12 |