AT-RESOURCE-MIB
The AT-RESOURCE-MIB provides SNMP objects to monitor physical hardware resource utilization and status, specifically tracking CPU load, memory consumption, and system temperature across Allied Telesis network devices.
Imported Objects
Objects
17 total| Object Name |
|---|
resourceThe AT-RESOURCE-MIB contains objects for displaying system hardware resource information. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.3.21 |
rscBoardTableA table of information about boards installed in a device. SEQUENCE OF RscBoardEntry .1.3.6.1.4.1.207.8.4.4.3.21.1 |
rscBoardEntryA conceptual row of entries of rscBoardTable. RscBoardEntry .1.3.6.1.4.1.207.8.4.4.3.21.1.1 |
rscStkIdThe ID of the stack member. It is a number assigned to a stackable unit by the operating system when it is stacked. An initial value of 1 is given to a stand alone unit. For a chassis switch, it corresponds to the card ID. Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.21.1.1.1 |
rscResourceIdThe resource ID number of the board. It is a number assigned to a hardware resource when the operating system detects its existence. Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.21.1.1.2 |
rscBoardTypeThis object indicates the type of the board. Its value can be 'Base', 'Expansion', 'Fan module' or 'PSU', etc.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.1.1.3 |
rscBoardNameThis object represents the name of the board. Its value can be 'SwitchBlade x908', 'XEM-12S' or 'AT-PWR05-AC', etc.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.1.1.4 |
rscBoardIDThis object represents the ID number of the board. Its value is an Allied Telesis assigned number, such as 274 for the XEM-12S, or 255 for the AT-9924Ts.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.21.1.1.5 |
rscBoardBayThis object indicates the board installation location. Its value can be 'Bay1', 'Bay2' or 'PSU1', etc. For a base board, it has a value of a single character space.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.1.1.6 |
rscBoardRevisionThis object represents the revision number of the board.ro DisplayString .1.3.6.1.4.1.207.8.4.4.3.21.1.1.7 |
rscBoardSerialNumberThis object represents the serial number of the board.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.1.1.8 |
hostInfoTableDescription. SEQUENCE OF HostInfoEntry .1.3.6.1.4.1.207.8.4.4.3.21.2 |
hostInfoEntryDescription. HostInfoEntry .1.3.6.1.4.1.207.8.4.4.3.21.2.1 |
hostInfoDRAMThis object indicates the host DRAM information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.2.1.1 |
hostInfoFlashThis object indicates the host Flash information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.2.1.2 |
hostInfoUptimeThis object represents the host up time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.2.1.3 |
hostInfoBootloaderVersionThis object represents the host boot loader version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.207.8.4.4.3.21.2.1.4 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.