AT-ALMMON-MIB
The AT-ALMMON-MIB facilitates the monitoring and retrieval of alarm status, severity levels, and event details for Alcatel-Lucent (now Nokia) network equipment via SNMP. It enables network management systems to detect, classify, and report hardware faults, software exceptions, and environmental anomalies to ensure rapid incident response.
Imported Objects
Objects
14 total| Object Name |
|---|
atAlmMonThe AT Alarm Monitoring MIB for managing and reporting device alarms. MODULE-IDENTITY .1.3.6.1.4.1.207.8.4.4.3.26 |
atAlmMonActionTableA table of information describing alarm monitoring inputs and consequent actions (i.e. fault LED & relay outputs). SEQUENCE OF AtAlmMonActionEntry .1.3.6.1.4.1.207.8.4.4.3.26.1 |
atAlmMonActionEntryThe description and configuration of what to do for a specific monitored alarm. AtAlmMonActionEntry .1.3.6.1.4.1.207.8.4.4.3.26.1.1 |
atAlmMonActionStackMemberIdThe index of the stack member of this alarm action.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.1 |
atAlmMonActionIndexThe numeric identifier of this alarm action.ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.2 |
atAlmMonAlarmTypeThe type of alarm that this action monitors.ro AtAlmMonAlarmType .1.3.6.1.4.1.207.8.4.4.3.26.1.1.3 |
atAlmMonAlarmTypeSelectionThe 1-based index of the alarm of the particular type (as catagorised by atAlmMonAlarmType).ro Unsigned32 .1.3.6.1.4.1.207.8.4.4.3.26.1.1.4 |
atAlmMonActionDescriptionThe description of this alarm monitoring entry.ro DisplayStringUnsized .1.3.6.1.4.1.207.8.4.4.3.26.1.1.5 |
atAlmMonActionUseRelay1Indicates/controls whether or not this alarm monitor drives the first relay output.rw AtAlmMonActionUseOutput .1.3.6.1.4.1.207.8.4.4.3.26.1.1.6 |
atAlmMonActionUseRelay2Indicates/controls whether or not this alarm monitor drives the second relay output.rw AtAlmMonActionUseOutput .1.3.6.1.4.1.207.8.4.4.3.26.1.1.7 |
atAlmMonActionUseRelay3Indicates/controls whether or not this alarm monitor drives the third relay output.rw AtAlmMonActionUseOutput .1.3.6.1.4.1.207.8.4.4.3.26.1.1.8 |
atAlmMonActionUseFaultLedIndicates/controls whether or not this alarm monitor drives the fault LED.rw AtAlmMonActionUseOutput .1.3.6.1.4.1.207.8.4.4.3.26.1.1.9 |
atAlmMonAbnormalStateIndicates/sets the abnormal (i.e. alarm active) state for a contact input. Only used for contactInput alarm monitors, ignored for all other types.rw AtAlmMonAbnormalState .1.3.6.1.4.1.207.8.4.4.3.26.1.1.10 |
atAlmMonActionStateIndicates the current state of this alarm monitor.ro AtAlmMonActionState .1.3.6.1.4.1.207.8.4.4.3.26.1.1.11 |
More MIBs from Allied Telesis
Browse all Allied TelesisMIBs →The AT-UWC-WLAN-SWITCH-MIB provides vendor-specific SNMP management for Allied Telesis Universal Wireless Controller (UWC) hardware, enabling monitoring of WLAN switch operational states, interface statistics, and wireless client association metrics.
The AtiEdgeSwitch-MIB provides vendor-specific SNMP extensions for monitoring and managing Layer 2 stackable switch operations, including interface status, port statistics, and stack topology, on ATI hardware platforms within Windows and UNIX network management environments.
Standard SNMP MIB module defining data structures for ALLIEDTELESYN-MIB.
The AT-BOARDS-MIB module provides a structured OID hierarchy for monitoring and managing specific hardware components on Allied Telesis devices, including board identifiers, firmware release versions, interface type definitions, and integrated chip IDs. This MIB enables granular inventory tracking and hardware status verification by mapping logical identifiers to physical subsystems within the network equipment chassis.
SWITCH-ATM-MIB monitors and manages Asynchronous Transfer Mode (ATM) interfaces and virtual circuit states on network switches, specifically tracking VPI/VCI pairings and traffic counters under the constraint that the Virtual Path Identifier is fixed by the implementation and excluded from table indexing.
Standard SNMP MIB module defining data structures for AtiL2-MIB.